Syntax for text element in page windows.

Hi ,
I have written the syntax in page windows as follows:
<B>Customer/Supplier:</> ,, &KNA1-NAME1&
But I am not getting any data in the output screen.
Plz suggest me the correct syntax.
Regards,
Mridul.

SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 .
PARAMETERS: p_cheque   RADIOBUTTON GROUP rb1 DEFAULT 'X',              " Cheques
             p_credit   RADIOBUTTON GROUP rb1,                          " Credit card
             p_bacs     RADIOBUTTON GROUP rb1.                          " Bacs/Chaps
SELECTION-SCREEN END OF BLOCK blk1.
goto ->Text Element Selection Text
P_CHEQUE     Cheques
P_CREDIT                     Credit Card
P_BACS               Bacs / Chaps
you can able to assign text to radio button.
Rewards if useful...............
Minal

Similar Messages

SAP SCRIPTs and syntax for text elements!

Hi all,
I am very new to this forum.
I am learning SAP scripts.Can any body here suggest me how to go about it?
More over i want the syntax that is used in page windows text elements.
It would be greatly appreciated if u could provide the documents if any for the same.
Thanks,
Ravi Soni.

Warm welcome to SDN.
Have a look below online PDFs related to scripts:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRRDI/BCSRVSCRRDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCREDIT/BCSRVSCREDIT.pdf
Also have a look at below links:
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf.
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
I hope it helps.
If you are satisfied with the answers, then you can give points to those answers by clicking on left side of the answer and mark them as useful answer, very helpful answer or solved problem.
Best Regards,
Vibha
<b>*Please mark all the helpful answers</b>

Text-element in main window

Hello together,
is it sorrect, that text-elements can only be used in the main window?
Is there any chance to use text-elemnts in a new-created window?
an example that does not work:
new window: TABLE
call in print-program:
CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_GR'
          window = 'TABLE'.
Unfortunately i need a new window with a possibility to print several text-elements.
Thanks a lot for help.

Hi Marcel,
In one of my developments, i've created text elements in the windows other than MAIN window. But it worked properly. I think there might be some other reasons for ur failure. Try to trace that.
Or else u just try by changing the Window type as CONST.
Try this out & let me know in case of any other concrens..
Reward if useful.
Pavan.

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
Mylenium

How to display standard text element of main window in next page

hi all
In scripts we have standard script medruck for purchase order.
i want to pull text elements ( terms and payment terms ) in to main window of next page.
i have included main window in page windows of next page ,but im unable to print text elements of terms and payment terms in next page...
any one give your valuable inputs.
Thanks
deepika.

Hi deepika,
First copy standard MEDRUCK to ZMEDRUCK and do the necessary changes.
Then check in driver program when exactly Terma and condition text element is called. Generaly its after printing all items but just check once to confirm.
If TERMS and condition element is called ate end just put a NEW-PAGE command at end of the text element which is called before terms.
Hope this will help You.
Thanks
Dhiraj.

Issue with printing of multiple text elements in main window

Hi experts,
I have developed a sales order form in SAP script.
I hv got two text elements in the main window. n i m calling these two text elements by using two write form functions in d print program.
The first text element is gettin called n d relevant fields in dat particular text element is being displyed. (Window - Main)
My problem is dat the second text element for the same main window is not gettin called n its relevant fields r not gettin displayed.
Plz help me to solve the querry.
Its urgent.
Thanks n Regards,
Purva

Hi,
Are you testing that from in same client where you developed, else make sure that after each change you need to transport the form to testing client.
second thing is check with code did you mention the same text element in window editor and in the program.
Reward if useful,
Thanks,
Sreeram.

No new editor for Text elements in Smart forms

Hello all,
I've a problem on SAP demo system (version 7.2). When I add new Text element on window then on tab General Attributes I'm only able to see ComboBoxes for "Text Type", "Start", button pencil (for going into fullscreen old editor) and button for checking object. The last thing is that I can also see here label "Use the fullscreen text editor". When I've checked on other systems I saw that instead of that label there is new editor here, and clicking on pencil button leads to new fullscreen editor.
Does anybody know where I can enforce smartforms builder to use new editor?
Best regards
Marcin Cholewczuk

Hello Marcin,
Is the text edit portion showing as disabled?
FYI i don't have MS Office installed on my frontend & in my case the text edit is disabled. Is this the case with you as well
BR,
Suhas

Language translation for text elements.

Hey ABAP Gurus,
I am having a problem, with translation of text elements in korean language. I have translated the TEs in korean, but they dont appear in ko, they appear in Portuguese...
I have tried using se63, and se80 for the translation...
Am I missing anything here? Please advise!
Thanks Nina.

Hi,
Check out transaction
SE32
Please check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm
Regards
Kiran Sure

Sourcetable for text elements

Hi there, could You tell me which table keeps application texts?
I've got such problem, that I'd like to determine text language by code, so for example:
IF ( condition1 ) .
text-001 will be taken in language A .
ELSEIF ( condition 2 ) .
text-002 will be taken in language B .
ENDIF .
I tried
IF ( condition1 ) .
langu = 'A' .
ELSEIF ( condition 2 ) .
langu = 'B' .
ENDIF .
but it has no effect, because when sy-langu in one line is set to new value ... in the next line in debuger it takes the old value
So maybe I could ... SELECT texts directly from database with language key, according to some code-condition ... is it make any sense?
DATA: langu LIKE sy-langu .
IF ( condition1 ) .
langu = 'A' .
ELSEIF ( condition 2 ) .
langu = 'B' .
ENDIF .
SELECT text FROM text_table WHERE language = langu .
Which table are text kept in? I'd be thankful for some tip, greetings. P.

HI,
Use this Statement to get the text elements of the program..
READ TEXTPOOL prog INTO itab LANGUAGE lang.
For more help press F1.

Feature request: Heading Tags and Paragraph Tags for Text element

Sugestion: Would like to see Reflow be able to format text element with heading tags like <h1> and paragraph tag <p>.

Thanks! Style management and reusable styles are a HUGE feature set coming to Reflow...won't be there immediately but very soon. Thanks for the input.

Table for text elements and selection texts

Hi All,
In which DB table does SAP stores program name and corresponding text-elements and selection texts used in that program.
There is a table D010TINF which just stores basic information but not the text elements number and name.
Thanks in advance.
Regards,
Atish

hi,
table name - RS38M (take se11 and give this, u can confirm)
field name - STEXTT
rgds
anver
if hlped pls rwrd points

Short dump when trying to see the text elements of main window

Hi ,
The form is running properly in 4.7 c . But when the same is copied in ECC5.0 (unicode) , i 'm getting short dump while trying to see the TEXT ELEMENTS .
The message is like ' trying to create a field with zero length'.
Regards,
Jytoi.

hi
I've never worked on ECC 5.0 version..however, I can only tell u that this could be the issue that code written in 4.7 may not be supported in 5.0..so try to get a good idea of ECC 5.0 before u start coding in this..
regards,
shamim

Why can't I put my paid for PhotoShop Elements 2 on Windows 7

I have Photo Shop Elements 2 paid for by buying camera. but Windows 7 does not seem to accept it.
I tried to download a free one but even this will not download. Please help.
from bagtay

Hi bagtay,
You can try this :
If you want to install CS2 it should be in a 32-bit OS environment like Windows XP. But Windows 7 has a solution for this.
1. Right-click on the installer file (.exe file)
2. Select Properties then go to the Compatibility tab.
3. Put a check on the “Run this program in compatibility mode for” then select the previous OS which do you think it worked. For your case select Windows XP with any Service Pack.
4. Then under Privilege Level, place a check on “Run this program as administrator”
5. Click Apply then OK.
Note: Effective December 13, Adobe disabled the activation server for CS2 products and Acrobat 7 because of a technical glitch.If the software title you have purchased is affected by the activation server being shut down, but is not available for download in the previously referenced pages, then please contact our support team at http://www.adobe.com/support/chat/ivrchat.html. Please be aware our support team will not be able to provide assistance for downloading or installing the Creative Suite 2 software.
Please go through this :
http://forums.adobe.com/thread/1195856
http://forums.adobe.com/thread/1114930
Regards,
Rajshree

Reduce margins for text only in Pages

I need to reduce the 1-inch default left and right margins in iWorks '06 to half an inch (.5 in) in the blank template, using only text. I ploughed through the user manual but can't find anything on how to solve that problem. I did see a template with half-inch margins but can't get it to work for me.
Can anyone help me with this?
Thanks.
ghkkoehler

click on Inspector icon, click on first icon in its menu bar and that highlights the document margins. Change to what you want in the relevant boxes and off you go. To make the change active for each box you must click in the next box or hit enter.
deirdre18

Focus for text elements

hi
I want to set the focus of mouse cursor on a certain component.
for example - if the text in the text feld is not valid -> move the focus to this field.
how can i control that?

textComponent.requestFocus()

Syntax for text element in page windows.

Similar Messages

Maybe you are looking for