Syntax problem: send the path to a function to another one

Hello!
What's the correct syntax:
I want a function in a remote mc to trigger another function
(situated on another mc: this is dynamic(may change):
Thanks for your help!

I would suggest that your life would be much easier as well
as communication between your movieclips if you learned to program
with classes and in an object-oriented way. Use xray (
http://osflash.org/xray) as a
way to see the hierarchy of your movie clips and better understand
the relationships between them.

Similar Messages

How to send the path as a parameter of a function

how i can write the path in library for send it like paraméter in function.
give me the steps
thanks

this is what I have:
               beginStep("[1] No Title", 0);
               ft.loadObjectLibrary("script", "script.properties",
                    LibraryLocation.ScriptLibraries);
               getDatabank("csvvv").getNextDatabankRecord();
                    web.window( "/web:window[@index='0' or @title='about:blank']")
                    .navigate("http://localhost/qademo");
                    getScript("said").callFunction("InputData1", "{{obj.script.login_user_id}}", "{{db.csvvv.login_user_id}}");
function call'd:
public boolean InputData1(@Arg("vObjPath")
               String vObjPath, @Arg("vValue")
               String vValue) throws Exception {
                    web.textBox(vObjPath).setText(vValue);
                    return true;
to send the path as a parameter to the function InputData ?????? my problem is in {{ obj.script.login_user_id}}
how to set up paths in library
give me all of steps !
thank you
Edited by: 850244 on 18 avr. 2011 05:33

Syntax problem After the Upgrade to SCM 7.0

We are facing one problem during the upgrade process in the sandbox environment.
After the upgrade we have completed the SPAU corrections ,while doing the SPAU corrections we found that one function module is not in active mode. We have checked the syntax,problem is there. we have tried to retrieve to the older version. But there are some notes were implemented during the 4.1 version. Those notes are now appearing in the SPAU with question mark.
We have reverted all the notes but still the code is having syntax problem and the code is in the 4.1 version only.
Please tell me how to solve it...
Moderator message - Welcome to SCN.
But
Moderator message - Cross post locked(please pick one forum or the other)
Edited by: Rob Burbank on Nov 3, 2009 12:03 PM

Hello Bouchards,
Thank you for the question. You can find Frequent Locations under Settings > Privacy > Location Services > System Services:
You can find more information at the following link:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Thank you for using Apple Support Communities.
Best,
Sheila M.

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

Excel won't open and error message There was a problem sending the command to the programe

Hi there
I'd be grateful for your help.
I've just bought a new laptop and installed Office 2013. I used Excel 2013, did what I needed to do and saved it. This was 5 days ago.
Today, I've tried opening the file from my desktop and get the error message 'There was a problem sending the command to the program'.
And when I try to open Excel to do the DDE fix, which seems to be the best suggestion, I can't open Excel at all. I've tried to get into it from the Apps screen.
Any help would be gratefully appreciated.
Thanks

Don't seem like this can be fixed so I went back to version 6.0.2 which works good.
I have Chrome now as my default browser and will not use fire fox until they fix it!
Chrome works great!

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

Word2007 in windows 7 -There was a problem sending the command to the program!

I just bought my new HP laptop with windows 7 Home premier edition, and then I installed windows office 2007 suite. It's ok if I only open the word without any existing word file. But if I open word with a word file, it says " there was a problem sending
the command to the program". I try this action under safe mode, it's no problem, I can open an existing word file. If I open the winword.exe and use menu "file-open" to open a word file, it's alright. But If I double click a word file, it shows that error.
I tried to change the registry information according to the solution on internet, but it doesn't work. I checked the compatibility mode, it says run in "windows XP sp3", and it is grey, I can't uncheck it.
Anyone got any idea to fix this problem?
Thanks a lot.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, This sounds like a problem with the file associations in Windows.. If there is any misunderstanding, please feel free to let
me know.
The first thing to check is to make sure that the file extensions are correctly associated with Word.
1.
Click Start > type or copy following command to the Search box
"C:\Program Files\Microsoft Office\Office12\winword.exe" /unregserver
2.
You should then, immediately, use the following command:
"C:\Program Files\Microsoft Office\Office12\winword.exe" /regserver
Re-associate the Word file manually:
Please go to
Start \Control Panel\Programs\Default Programs\Set Associations.
Locate the files .doc, .docm,.docx, .dot, .dotm, check if there are associated with
Microsoft Word. If not, highlight the file and click the
Change Program button. Choose Microsoft Word from the list. If you are unable to see Microsoft Word from the list, click the
Browse button. Browse to the folder: C:\Program Files\Microsoft Office\Office12, and choose
WINWORD.EXE.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

The icon for firefox is not working. "There was a problem sending the command to the program" pops up. Cannot get in to firefox

Since the upgrade, the icon does not work. Now this message comes up. I made Google my home page by following directions on this site. I deleted the old icon as it didnt work, and this new one came up on my desktop and it presented the message above.

Hi,
Before you open any of the applications, please go to Task Manager to see if their processes are stuck there. If so, shut them down and try again.
You can also try starting the applications in Safe Mode to determine if the problem is 3rd-party add-ins related.
Please refer to this article below to learn more:
http://office.microsoft.com/en-001/support/why-cant-i-start-my-office-2013-application-HA104011864.aspx
As for the Excel problem 'There was a problem sending the command to the program', please note when double-clicking an Excel workbook, a
dynamic data exchange (DDE) message is sent to Excel, instructing it to open the workbook that you double-clicked. If you
turn on the "Ignore other applications that use Dynamic Data Exchange (DDE)“ setting,
the DDE message sent to Excel by Windows Explorer is ignored, and Excel does not open the workbook that you double-clicked.
To automatically solve this issue , we recommend to run “Microsoft Fix it 20074” and follow the steps in the wizard:
http://support.microsoft.com/kb/211494/en-us
You can also try to fix it manually by the steps under 'Let me fix it myself'.
If the steps above don't help, we can try to repair Office from Control Panel -> Programs and Features to check the result.
Regards,
Melon Chen
TechNet Community Support

Problem with the MVMapView.print(printMapDiv,) function.

Hello,
I have a problem with the MVMapView.print(printMapDiv,) function.
My FOIs are displayed correct on the screen but on the printed letter
the stroke(border) color and the labels of a circle are not displayed.
the fois have a custom style:
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
and are created like this:
v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
v_result.setHTMLElement('1',0,0);
Browser: I can see the map with a green circle, a red border and '1' as a label on
top of the Circle.
Printed Letter: I see the map with the green circle but no red border Color and no label.
The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
It is a javascript function called through a href link:
function mapPrint()
var a=document.getElementById("printmap");
global_gdi.mapviewer.mapview.print(a);
Version is Ver11_1_1_5_B110527
Does anbody know how to print the map properly including the contents of the
MVFOI class set trough setHTMLElement function?
Greetings
Andre

Thanks for your reply but it is not working and i can prove that.
I have a small example based on the mapviewer print tutorial. To run it you need a
mapviewer installation and copy the text into a html file. In the browser you can see
a green point with a red border and red label text on a map.
If you use the print button everything except the label text will be printed.
I think this is a mapviewer css-api bug.
<html>
<head>
<META http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">
@media screen
.noscreen {display: none;}
@media print
.noprint{display: none;}
</style>
<script language="Javascript" src="/mapviewer/fsmc/jslib/oraclemaps.js"></script>
<script language=javascript>
var mapview;
var baseURL = "http://"+document.location.host+"/mapviewer";
function showMap()
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addMapTileLayer(new MVMapTileLayer("mvdemo.demo_map"));
mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
mapview.setZoomLevel(4);
mapview.display();
//adds custom foi with label
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
var markerStyle = new MVXMLStyle("my_vector_icon_", xmlDef);
mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
var v_result = new MVFOI("11", mpoint, markerStyle, null, 60, 60);
v_result.setHTMLElement('test label',0,0);
mapview.addFOI(v_result);
function mapPrint()
var a=document.getElementById("printmap");
mapview.print(a);
</script>
</head>
<body onload=javascript:showMap()>
<div id="map" style="position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px"></div>
<div id="printmap" class="noscreen"></div>
<p>Please click <a href="javascript:mapPrint()">here</a> to print map</p>
</body>
</html>
Edited by: user12005064 on 27.02.2012 02:37

There was a problem sending the command to the program when opening Microsoft Project 2010 files

When opening MS Project 2010 files from the file and print server, I receive "There was a problem sending the command to the program." Copy the same file to my local drive and the file opens fine. This can be repeated by several other
users. Created a simple project file and once the size hit 1 MB, the error appeared. The error appears on all files over 1 MB.
I am a domain admin, so it is not a rights issue. This does not seem to be a network latency issue, the file copies extremely fast.
Any ideas?

This message appears to be caused by Windows Explorer trying to send old-fashioned DDE messages to the Application.
Since MS Project has no "Ignore DDE messages" setting you might want to go change the compatibility settings for WinProj.EXE (and any shortcut to it) to Windows 7 or greater. Hopefully then Windows Explorer will stop trying to send DDE messages.
Another possible culprit is older versions of the WinZip explorer extensions - I would disable them as well.
Good luck,
James.
James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

I keep getting a message saying "There was a problem sending the command to the program". What is wrong?

For about 1 week now i have been getting the same message now allowing me to send or open. It says "There was a problem sending the command to the program." Why? I cannot even answer your email asking for to confirm my email question. It will not allow me to access you when I click on the line you tell me to click on. How come?

Click here and request assistance.
(87825)

Problem parsing the path data

I am trying to open a PSD doc in Photoshop CS3 and I am getting an error: problem parsing the path data. Is there any way around this?

Is the icon really an alias? Aliases have a hard-to-see arrow in the lower left corner. If you click once on the icon and do a Get Info, you'll be told if it's an alias, and if so, where the original is, or once was if the original is gone.
Following Ramon and Buko's advice, I got rid of Norton products and several minor irritations at the same time.
--Gene

Syntax problem: send the path to a function to another one

Similar Messages

Maybe you are looking for