Syntax template not displayin in source editor

In source editor, hot keys or syntax templates are not displaying
for example if we presss systme.println. if we press s and ctrl+[Enter] then synatax template will display. but that is not displaying. i am typin the entire syntax.
I am using jdeveloper thru developer suit.
regards,
pasupathi

Hi,
for system.out.printline the code template abbreviation is
sop ctrl+Enter
Frank

Similar Messages

  • Can not set external source editor

    I am again having the problem of being able to use Notepad++ as my default external source editor. I had problems with this in previous versions. I just upgraded from version 21 to version 22 and I can no longer edit source. view_source.editor.path is still set and unchanged. view_source.editor.external is also still set and true but the view source now brings up the Firefox default which does not allow editing anything! Why would this keep changing? Where might this also be set as the about:config settings are apparently not being used. In searching I have not seen any other suggestions except going into about:config and then confirming or changing the two fields that are already set and worked in the past. What am I missing and why does it keep changing with each upgrade? This is Windows XP but my Windows 7 computer is doing the same thing.
    Thank you.

    Are there any errors related to view source in the Browser/Error Console (Firefox/Tools > Web Developer;Ctrl+Shift+J)?
    Do you see the correct path if you paste this code in the code field in the error console and click evaluate?
    <pre><nowiki>viewSourceAppPath =Components.classes["@mozilla.org/preferences-service;1"] .getService(Components.interfaces.nsIPrefBranch) .getComplexValue("view_source.editor.path",Components.interfaces.nsIFile);
    viewSourceAppPath.path;</nowiki></pre>

  • Error Message: "The formula syntax is not supported by the report"

    We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
    I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
    doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
    But when I tried to Add FormulaField, it succeeds
    Please help me in knowing how to add SQlExpressionFields to ReportDocument.
    Regards,
    -atul

    Thanx Don & Ludek for the reply.
    CR provides support for addition/modification of SQLExpressions.
    CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
    CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
    innerReport .SQLExpressionFields.Add(name, strSQLExpression)
    CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
    Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
    Thanx
    -atul
    Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

  • Issue with Wcf Adapter Service Template not inclueded or shown in Visual Studio.Follow steps which your site sugessted but still Template issue

    Hi,
    My server have SharePoint Server 2013,Sql, then necessary required SDKS like
    WCF LOB Adapter SDK(download Complete), Biz talk Adapter for my Sap business suite(download Complete), SAP client libraries,Business Data Catalog Definition Editor installed as part of
    the Microsoft Office SharePoint Server2013 SDK.
    Still facing issue Template not included in any version of Visual Studio.

    Hi Anand,
    While installing the WCF LOB adapter SDK, I guess you haven't chosen "Complete" installation.
    Try this:
    1) Open Add/Remove programs in control panel.
    2) Select the change option WCF LOB adapter SDK and enable 'Tools' in the list of features to be installed
    (Tools install the Add adapter service ref Plug-in).
    Alternatively,
    You can also uninstall and then install the WCF LOB adapter SDK, but this time make sure you do a custom install by checking everything not just the default.
    Rachit

  • Source editor is AWOL in SJSE8 Build 051011_2

    Refer to tutorial: UML Modeling: Developing Applications
    When right clicking and expecting "Navigate to source" in the context menu, it does not appear. Furthermore, I have been unable to get the source editor to appear at all.
    Is this a:
    1) Feature
    2) Bug
    3) Omission
    4) Installation Problem
    Thanxinadvance

    I'm using a home built COTS box based on an ECS motherboard, 1.8G Celly, 4 hard drives:[1 120G WD, 1 80G WD, 2 80G Maxtors], 512M ec parity RAM, 3 19" DELL Trinitrons, 1Matrox GC, 1 ATI 9550 GC, 256k cable modem, Belkin "g" wifi router. NO OVERCLOCKING, air cooled, Stable.
    I'm running 3 installs of XP Pro, and 1 install of Kubuntu. Ihave a 20G personal documents directory that spans 15 years of computing :)
    AS far as where I was in the tutorial, I don't remember--I had to move on!
    I'm sure it was near the beginning though because I didn't get very far.

  • Error when trying to use excel source editor in SSIS 2012

    I am using SQL Server 2012. This error occurs when I try o select the name of excel sheet in excel source editor in SSIS 2012.  I am on win 7 64 Bit machine. I have office 2010. 
    Could not retrieve the table information for the connection manager 'Excel Connection Manager'. Failed to connect to the source using the connection manager 'Excel Connection Manager'. 
    Thanks in advance

    Hi Satya, I even tried installing 32-bit ACE OLE DB providers even before posting this and I do not have permissions
    to install it on my machine. I will work with IT Dept and update the status on how it goes. 
    Thanks

  • Error in viewing data in a data template with multiple data sources

    Hello,
    I have designed a data template with two data sources.One is from DEPARTMENTS table and the other datasource is a xml file.Following is the code for the data template :
    <dataTemplate name="EmployeeListing" dataSourceRef="demo">
    <parameters>
    <parameter name="p_DEPTNO" dataType="character" defaultValue="20"/>
    </parameters>
    <dataQuery>
    <sqlStatement name="Q1">
    <![CDATA[SELECT DEPARTMENT_NAME,DEPARTMENT_ID,LOC from DEPARTMENTS]]>
    </sqlStatement>
    <xml name="empxml" expressionPath=".//ROW[DEPARTMENT_NAME =$DEPARTMENT_NAME]">
    <url method="GET" realm="" username="" password="">file:///D:\OraHome_1\xmlp\XMLP\DemoFiles\Employee Salary Report.xml</url>
    </xml>
    /dataQuery>
    </dataTemplate>
    The problem is when i am trying to view the data, only data from SQL Query Q1 is getting displayed and the data from Employee xml is not at all getting displayed.
    Could anyone please let me know what i am missing?
    Thanks
    Nutan
    Edited by: user609971 on Oct 23, 2008 8:06 AM

    This is from Documenation sample....
    Did you see the data structure section, where you say, how you wanted the columns ?
    <?xml version="1.0" encoding="WINDOWS-1252" ?>
    <dataTemplate name="Employee Listing" description="List of Employees" v
    ersion="1.0">
    <parameters>- Defines a single parameter for the Department Number
    - with default of 20:
    <parameter name="p_DEPTNO" dataType="character"
    defaultValue="20"/>
    </parameters>
    <dataQuery>
    <sqlStatement name="Q1">
    <![CDATA[SELECT DEPTNO,DNAME,LOC from dept
                      order by deptno]]>
    </sqlStatement>
    <xml name="empxml" expressionPath=".//ROW[DEPTNO=$DEPTNO]"> - Defines name
    - and link to DEPTNO in Q1
    <url method="GET" realm="" username="" password="">
    file:///d:/dttest/employee.xml</url> - Defines url for xml data
    </xml>
    </dataQuery>-
    <dataStructure>- The following section specifies the XML hierarchy
    - for the returning data:
    <group name="G_DEPT" source="Q1"
    <element name="DEPT_NUMBER" value="DEPTNO" />
    <element name="DEPT_NAME" value="DNAME"/>
    - This creates a summary total at the department level based
    - on the salaries at the employee level for each department:      
    <element name="DEPTSAL" value="G_EMP.SALARY"
    function="SUM()"/>
              <element name="LOCATION" value="LOC" />
    <group name="G_EMP" source="empxml">
    <element name="EMPLOYEE_NUMBER" value="EMPNO" />
    <element name="NAME" value="ENAME"/>
    <element name="JOB" value="JOB" />
    <element name="MANAGER" value="MGR"/>
    <element name= "HIREDATE" value="HIREDATE"/>
    <element name="SALARY" value="SAL"/>
    </group>     
    </group>
    </dataStructure>
    </dataTemplate>

  • External source editor

    Anyone know how to setup an external source editor?
    D11 allows one to change loads of media editors based on its
    "extension" and/or "mime/type", but there is in the list support
    for source editor, which IMHO is the most important of all.
    That and all the scripts DEFAULT to be writen as text files
    in the same directory as the cast/movie that they come from
    naturally.
    I would like to use a "serious" text editor to hack
    lingo/javascript scripts, not the internal text editor (which imho,
    should just be scraped and sticked to view/breakpoint/inspect
    mode).
    Thanx in advance,
    Kindaian

    I like to use NetBeans at
    http://www.netbeans.org/ . It
    does code folding, and has a nice javascript reference. You can set
    it up with Director by going to Edit->Preferences->Editors.
    Locate the Netbeans executable typically at:
    C:\Program Files\NetBeans 6.5\bin\netbeans.exe
    Be forewarned though: You must specify an external file with
    the .js extension for Nebeans to know its a javascript file.
    Unfortunately, if you just double click any cast member that is a
    script, Director launches the editor opening a temp file with the
    extension .ls (as in Linked Script -dumb). Netbeans won't know what
    to do with it and won't show you all the Javascript features like
    code folding.
    You must specify the external file first. To do this,
    highlight the script cast member and use the Property Inspector in
    Director to specify the 'Link As' file. Note that Director cache's
    this file inside your .dir so you won't need to distribute the .js
    source with your project.

  • Source editor preferences.

    empty

    ...And we kept the promise. Even though there is no UI for the source editor
    preferences yet, you can modify the properties "editor.source.maxLineLen",
    "editor.source.indentChar" and "editor.source.indentCount" in the properties
    file located at:
    {Workspace
    directory}\.metadata\.plugins\org.eclipse.core.runtime\.settings\com.m7.nitr
    ox.prefs
    Here is a description and the default value for each of these properties
    Note that you only need to have a property in the file mentioned above only
    if its value is different than the default value.
    #The maximum number of characters in a source code line, after which
    #the line is wrapped.
    #This is only used for the source code generated by NitroX.
    editor.source.maxLineLen=80
    #The character used for indentation in the source code.
    #Allowed values are "space" and "tab".
    #This is only used for the source code generated by NitroX.
    editor.source.indentChar=space
    #The number of characters used for source code indentation.
    #The character used for indentation is specified by the
    "editor.source.indentChar" property.
    #This is only used for the source code generated by NitroX.
    editor.source.indentCount=2
    M7 Support
    "DanBar" <[email protected]> wrote in message news:413811b4$[email protected]..
    What about source editor preferences?You've promised it will be provided in 1.1 final release... (see
    news://newsgroups.m7.com:119/[email protected]).
    Regards,
    DanBar

  • The project file is not bound to source control, but the solution contains source control binding information for it.

    This may be more of a SQL Server Management Studio question, but I couldn't find a SSMS forum...
    I've got a database solution that contains several projects.  They're just to keep track of changes to stored procedures, triggers, views, etc in a few databases I maintain.  There is a problem with two of the projects though.  No matter what I do, I can't seem to get them bound to source control right.  When I open the solution, I get:
    The project file is not bound to source control, but the solution contains source control binding information for it.
    With two options, use solution binding and remove solution binding.  If I keep the solution binding, everything works fine.  But it's really annoying to have to deal with every time I open the solution.  If I remove the solution binding, the projects are now unbound again.  If I try to fix them (using the change source control or Add Selected Projects to Source Control options under the File->source control menu), I just end up in the same situation.  I've even tried deleting the projects and re-creating them from scratch, then re-adding them to VSS.  If I open the solution files in a text editor I can see the SCC tags in every project, but these two.  Since I can't manually add the tags, and Management Studio itself only seems to want to bind them the wrong way, I'm getting really frustrated.
    Can anyone point me toward a way to bind these so they work like the rest?

    However, that does not appear to be the ONLY cause of the problem.  I am a single user and only using TFS2010 and SSMS2008R2.  My issue is that I wanted a solution file for each project so that they could managed independently, and a super-solution
    file that contained all projects, so that I could perform system-wide searches and cross-checks.
    I solved the problem by:
    1. Choosing the option to use solution binding, then
    2. Adding another project to the solution.  This forced the re-write of the solution file.
    3. Adding another script to the project.  This forced the re-write of the project file.
    4. Checking in all changes.
    5. Deleting the new script and the extra project,
    6 Checking in all changes.
    This appears to have solved the problem.

  • Source not found: The source attachment does not contain the source........

    Source not found: The source attachment does not contain the source for the file ClassLoader.Class
    Hey,
    I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
    java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Exception in thread "main"
    I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
    Thanks in advance for your thoughts,
    Struggling to Run

    Ok...after I thought everything was going well enough.... problems are arising.
    Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
    with the two environments installed i thought i was ready fro the next step.
    I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
    j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
    j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
    j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
    j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
    jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
    I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
    1___________
    java.lang.NoClassDefFoundError: couponCounter/CouponCounter
    Exception in thread "main"
    2__________
    Exception in thread "main" java.lang.Error: Unresolved compilation problem:
         Syntax error, insert "}" to complete ClassBody
         at BensCalculator.main(BensCalculator.java:112)
    Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
    Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
    Thank you

  • XML source editor code style preferences

    Hello,
    I'm using JDev 10.1.3.1.
    When editing an XML file using the source editor I can right click and select 'Reformat'. This indents my XML elements 1 space. Where can I set this to 2 spaces instead?
    Thanks!

    XML preferences are set in the Tools>Preferences>Code Editor>XML and JSP/HTML.
    The preferences does not have provision to set indentation.

  • Script not finding hyperlink source

    Extract to epub fails on hyperlinks and I have a problem trying to find and get rid of them. The hyperlinks only show up in story editor. I made a two page test ID file to narrow the problem. It has one of the problem hyperlinks and I can't find it with a script. I'm using a script mentioned in another hyperlink post http://forums.adobe.com/message/4629362#4629362
    The script is:
    objHyperLinks = app.activeDocument.hyperlinks;
    for (i=0; i<objHyperLinks.length; i++)
              if (objHyperLinks[i].source instanceof HyperlinkPageItemSource)
                        alert (objHyperLinks[i].source.sourcePageItem.id);
                alert('Hello World');
    I have the ID source, the script source, and an image of the entire story in story editor out in Dropbox at:
    https://www.dropbox.com/s/octqiftupzkfoiv/IndesignTestFile6.zip
    I'm on win xp, id 5.5
    Any help would be greatly appreciated. I'm brand new to indesign scripts so still working on getting to square one.

    The -sourcepath option takes a path ending in a directory. It should not
    contain "*.java" or any other file pattern. And it supplies the path to the
    root directory of the package directories, not directories contain source files.
    (I think it should have been named "packagepath".) It is mostly ignored\
    when passing in source filenames (like *.java).
    So try replacing this:
    -sourcepath .\com\SteveSystems\People\*.java
    with this:
    .\com\SteveSystems\People\*.java
    -Doug

  • Query Template Not Loading

    Hi,
    We are using XMII 12.0 and NW 7.1,
    We have deployed Query templates in web pages and while loading , applets are not loading...
    in NWA we saw the following error
    Unable to load template PATH [pathId=<id no>,<Query Template Path>]..
    Category:  /Applications/XMII
    Location:  com.sap.xmii.Illuminator.templates.TemplateManager
    Application:  sap.com/xappsxmiiear
    but the template mentioned in the error is in the same path and working fine if we open from work bench.
    and also we are seeing the following error.
    Exception of type com.sap.sql.log.OpenSQLException caught: Synchronisation reader could not access data source java:comp/env/jdbc/XMIIDataSource..
    Pages are not working...
    What is the problem? How to solve it?
    Regards,
    Senthil

    I think that you have the wrong version of NW for the installation of MII 12.0.  It is not NW 7.1 (NWCE), but rather 2004s (7.0?).
    Check the installation guide.  There may be some other downloads required before loading NW.
    Good luck,
    Mike

  • Text wrap type syntax is not supported in Indesign CS4

    Dear all,
    Text wrap type syntax is not supported in Indesign CS4. How to set the text wrap type in indesign CS4

    Hey!
    app.selection[0].textWrapPreferences.textWrapMode = TextWrapModes.CONTOUR;
    TextWrapModes.BOUNDING_BOX_TEXT_WRAP
    Wraps text around the object's bounding box.
    1651729523 = 'bsds'
    TextWrapModes.CONTOUR
    Wraps text around the object following the specified contour options.
    1835233134 = 'mcon'
    TextWrapModes.JUMP_OBJECT_TEXT_WRAP
    Forces text to jump above or below the object, so that no text appears on  the object's right or left.
    1650552420 = 'band'
    TextWrapModes.NEXT_COLUMN_TEXT_WRAP
    Forces text to jump to the next available column.
    1853384306 = 'nxfr'
    TextWrapModes.NONE
    No text wrap.
    1852796517 = 'none'
    tomaxxi

Maybe you are looking for