SysGen - no variables for IP source generation

Hello,
I am using Vivado 2015.1.
I have added a SysGen module by going File->add sources->DSP->and choosing a simulink model
As the Simulink model contains variables, that must be defined for it to run,I have added in the MATLAB model properties a callback 'InitFcn' that runs before the simulation.
However,
in Vivado when I go to Proj Manager-> IP sources -> right click SysGen module -> Generate product outputs OR reset product outputs,
in either case I get errors because the variables aren't defined. Vivado is telling Simulink to generate before running the callback.
So I am after a way to make sure that the system is only generated once I have my variables loaded.
Thankyou for help in-advance.

Hello,
What if you try the preloadfcn callback?

Similar Messages

How to pass a variable for a SQL query in OLEDB source?

Hi All,
I am new to SSIS and working on it past few days. Can anyone please help me getting through a scenario where I need to pass a variable in the SQL statement in OLEDB source connection. Please find below for the details.
eg:
1) I have a SQL table with the columns SerialNumber, Name, IsValid, FileName with multiple rows.
2) I have the file Name in a variable called Variable1.
3) I want to read the data from my SQL table filtering based on the FileName (Variable1) within a data flow task and pull that data to the destination table.
Question: In the data flow task, added source and destination DB connection with a script component in between to perform my validations. When trying to retrieve the data from source using the variable (i.e. SQL Query with variable), I am not able to add
the query as the SQL statement box is disabled. How to filter the data based on the variable in the source DB ?
Any help/suggestions would be of great help.
Thanks,
Sri

Just to add with Vaibhav comment .
SQL Command : SQL query either with SQL variable or any condition or simple Sql statement
Like ;
Select * from dimcustomer
SQL Command using Varible :
Sometimes we design our dynamic query in variable and directly use that variable name in oledb source.
If you Sql query needs a condition based on SSIS variable .
you can find a Example here :
http://www.toadworld.com/platforms/sql-server/b/weblog/archive/2013/01/17/ssis-replace-dynamic-sql-with-variables.aspx
http://www.select-sql.com/mssql/how-to-use-a-variable-inside-sql-in-ssis-data-flow-tasks.html
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

[E039(R9E)] Errors: Source 0P_RMA_CPER is not a permitted variable for targ

Hi,gurus here.
When I saved Query, it reported an error:
[E039(R9E)] Errors: Source 0P_RMA_CPER is not a permitted variable for target Current Year Period.
I never used 0P_RMA_CPER in query. How to find it and make it up?
Thanks.

Hi,
Please log out and login again.
I had the same issue. above solution worked for me.

Issue with SQL Query with Presentation Variable as Data Source in BI Publisher

Hello All
I have an issue with creating BIP report based on OBIEE reports which is done using direct SQL. There is this one report in OBIEE dashboard, which is written using direct SQL. To create the pixel perfect version of this report, I am creating BIP data model using SQL Query as data source. The physical query that is used to create OBIEE report has several presentation variables in its where clause.
select TILE4,max(APPTS), 'Top Count' from
SELECT c5 as division,nvl(DECODE (C2,0,0,(c1/c2)*100),0) AS APPTS,NTILE (4) OVER ( ORDER BY nvl(DECODE (C2,0,0,(c1/c2)*100),0)) AS TILE4,
c4 as dept,c6 as month FROM
select sum(case when T6736.TYPE = 'ATM' then T7608.COUNT end ) as c1,
     sum(case when T6736.TYPE in ('Call Center', 'LSM') then T7608.CONFIRMED_COUNT end ) as c2,
     T802.NAME_LEVEL_6 as c3,
     T802.NAME_LEVEL_1 as c4,
     T6172.CALENDARMONTHNAMEANDYEAR as c5,
     T6172.CALENDARMONTHNUMBERINYEAR as c6,
     T802.DEPT_CODE as c7
from
     DW_date_DIM T6736 /* z_dim_date */ ,
     DW_MONTH_DIM T6172 /* z_dim_month */ ,
     DW_GEOS_DIM T802 /* z_dim_dept_geo_hierarchy */ ,
     DW_Count_MONTH_AGG T7608 /* z_fact_Count_month_agg */
where ( T802.DEpt_CODE = T7608.DEPT_CODE and T802.NAME_LEVEL_1 = '@{PV_D}{RSD}'
and T802.CALENDARMONTHNAMEANDYEAR = 'July 2013'
and T6172.MONTH_KEY = T7608.MONTH_KEY and T6736.DATE_KEY = T7608.DATE_KEY
and (T6172.CALENDARMONTHNUMBERINYEAR between substr('@{Month_Start}',0,6) and substr('@{Month_END}',8,13))
and (T6736.TYPE in ('Call Center', 'LSM')) )
group by T802.DEPT_CODE, T802.NAME_LEVEL_6, T802.NAME_LEVEL_1, T6172.CALENDARMONTHNAMEANDYEAR, T6172.CALENDARMONTHNUMBERINYEAR
order by c4, c3, c6, c7, c5
))where tile4=3 group by tile4
When I try to view data after creating the data set, I get the following error:
Failed to load XML
XML Parsing Error: mismatched tag. Expected: . Location: http://172.20.17.142:9704/xmlpserver/servlet/xdo Line Number 2, Column 580:
Now when I remove those Presention variables (@{PV1}, @{PV2}) in the query with some hard coded values, it is working fine.
So I know it is the PV that's causing this error.
How can I work around it?
There is no way to create equivalent report without using the direct sql..
Thanks in advance

I have found a solution to this problem after some more investigation. PowerQuery does not support to use SQL statement as source for Teradata (possibly same for other sources as well). This is "by design" according to Microsoft. Hence the problem
is not because different PowerQuery versions as mentioned above. When designing the query in PowerQuery in Excel make sure to use the interface/navigation to create the query/select tables and NOT a SQL statement. The SQL statement as source works fine on
a client machine but not when scheduling it in Power BI in the cloud. I would like to see that the functionality within PowerQuery and Excel should be the same as in Power BI in the cloud. And at least when there is a difference it would be nice with documentation
or more descriptive errors.
//Jonas

How do I use a OS (Windows) Environment Variable in the source path of me ActionScript 3.0 settings

I'm sure this can be done as I know we used something similiar at my old work place, below is an image showing what I am attempting to do.
We used this to create more portable / shareable assets files which when symbols are linking to code, the code was very often in different directories on different machines.
So we had set up environment variables in the OS to point to source directories and then used these variables in the source paths.
As long as everyone had these variables set up then it would all work.
Anyone know the correct way to do this in Flash CC
Thanks in advance!
Best Wishes
Rhys Thomas

sinious the problem with doing that is that the changed path gets into the code repository as well, so you wind up with everyone going back and forth changing it to their own value, which is a hassle. If you use relative paths and a standard project setup, then it all "just works" without a problem.
For example, this is the setup I use:
.dev
     .thisProject
          .Flash1
               Flash1.as
               .Flash1
                    Flash1.xfl
               .view
                    .audioAssets
                    .customViews
          .SoundLib
               SoundLib.xfl
          SoundLib.swc
     .bin <swfs are output here
          .xml
     .core
          .control
          .model
          .service
          .view
We have a "base project" that you check out to start a new project (we do heaps of similar work), and the paths are already set up to be relative. Having each project point to its own copy of the core code allows for fine-grained control of which revision you're using--we've even pointed deliberately to old versions or branches on rare occasions.
The bin folder is actually shared with the website repository, which is in a different directory from the Flash source code (in the website, it has a different name). This allows the generated swfs to be easily updated and ensures that the latest XML is being used both for development and on the site.
The "thisProject" folder actually includes a Flash Builder workspace with all the standard shortcuts, etc., already set up. This is primarily because of how the "default path" works when you create a new Flash Pro project in FB. Because we output a level up from the workspace, we hack the .metadata folder every time, but that's a small change.

Variable for 0FISCPER displays od values

Hi
I have created a query containing a interval variable for 0FISCPER. The Query is based on a multiprovider that is build on a single ODS containing WBS line items loaded through 0CO_OM_WBS_6. When the query is run and the variable box appears I press the selection button for 0FISCPER. It displays som od values for selection that does not exist in the ODS. fx. 001.0010. When i select such a value it is converted to 001.2010. The ODS only contain data for 2003-2006.
Can you help me to understand what causes this, so i am able to fix it.
Chris

1.     On the Administrator Workbench: Modeling screen:
a.     Choose Source Systems.
b.     In the right hand window select the source system from which you would like to transfer the global settings.
c.     From the context menu choose Transfer global settings.
2.     On the Transfer global settings: Selection view in the frame Transfer global table contents select the checkboxes for the settings you want to use from your R/3 source system:
     Fiscal year variants to transfer fiscal year variants
3.     In the frame Mode choose Update Tables.
4.     Choose Execute.
5.     Choose Back twice.
Then try your reporting......

Variable for entire where clause

Is it possible to use a variable for the entire where clause in a PL/SQL select statement?
I have a where clause stored as a string in the database and I want to use that entire string as a variable, but my procedure will not compile because it is missing the relational operator.
SELECT whereclause FROM clausetable WHERE clause = 'TEST'; will return this string: column1 = 'abc'
Here's my procedure:
create or replace
PROCEDURE TESTWC
(c_out OUT sys_refcursor )
AS
BEGIN
DECLARE
v_whereclause VARCHAR2(255);
BEGIN
SELECT whereclause
INTO v_whereclause
FROM clause_table
WHERE clause = 'TEST';
DBMS_OUTPUT.PUT_LINE(v_whereclause);
OPEN c_test FOR SELECT * FROM dpacsoftware WHERE v_whereclause;
NULL;
END;
END TESTWC;

Is it possible to use a variable for the entire where clause in a PL/SQL select statement?Unfortunately yes.
I have a where clause stored as a string in the databaseThis is a really bad idea, like storing the source for half your program in a text file with a bunch of Java or C or FORTRAN code and opening, reading, compiling and linking at run time.
It is slow, slow, slow as you can expect, and dangerous and insecure, since someone could have put a format C: command in your source file, or something equivalently nasty to a database.

2 variables for same characteristic in planning level in BPS

Hello,
I would appreciate your help implementing this scenario: a user has access to certain versions and should be a able to copy data between 2 of those versions.
We have 4 versions on our master data: 001, 002, 003 and 004.
A certain user should be able to access versions 001, 002 and 003, and should not be able to access version 004.
So we have an authorization object applied to that user with:
-> 0TCAACTVT EQ 03
-> 0TCAIPROV EQ <real time infocube>
-> 0TCAVALID CP *
-> 0VERSION EQ 001, 002 and 003
Then, users should be able to copy data between versions.
We created 2 variables on planning area, named ZVERSOLD and ZVERSNEW, with these characteristics:
-> Characteristic: 0VERSION
-> Replacement Type: USERVALUE User-defined values
-> Restriction of Values Required by User: enabled
-> Input Allowed by User: enabled
So this particular user should only see those 3 versions when pressing F4 when filing both variables.
After that, we created the planning level with the u201Ccopyu201D planning function.
But now, on planning level, we need to restrict 0VERSION, but we have a problem because we are not able to restrict it using 2 variables (ZVERSOLD and ZVERSNEW). Only one.
If we donu2019t use any variable, user gets an authorization error because he is not able to access to all data due to authorizations.
Does anyone have a way to avoid this issue? Should authorizations be defined in a different way? Should variables be defined in a different way?
Hopefully I exposed all required details to get help, and that my question wasnu2019t too much confused.
Again, thank you very much in advance for your support.
Rui

Hello,
If you restrict the VERSION with variable ZVERSNEW for target version then the function should work. But if you get any error related to reading reference data for the source version then you can create a new variable of type exit and populate it with the values selected by the user in two variables ZVERSOLD and ZVERSNEW using the two APIs :
API_SEMBPS_VARIABLE_GETDETAIL - to get the current value of the two Variables
API_SEMBPS_VARIABLE_SET - to set the Variable Values for the Exit type variable
Regards,
Deepti

Variables for all .fm files on the .book

Is it possible to create a variable for displaying a date over all .fm files contained on a .book?
My .book structure is the next:
Catalog.book
-Title.fm
-Index.fm
-Content.fm
Each time I need to update the date of the catalog, I should edit the master page of index, and both master pages (left/right) of the content.
Is there an easier way to make those changes?
By the time I have a variable called 'revision_date' in both files, but I must change them twice.
Thanks in advance

1. Educate him. Point out that the system variable is intended to overcome human mistakes....
2. a. Either in one of your working files or In a new, separate file, create a unique paragaph tag -- ModDate, for instance --. Insert the Modification Date variable as the only content.
b. Insert a cross-reference from your working file(s) to the ModDate para tag.
c. Whenever you open and Save the file with the date-controlling variable, the change should ripple into all files that use that as the source for the cross-reference.

Formula variable for dates

Hi gurus,
I am trying to fill a formula variable of type date via manual entry, but I cannot find which is the correct way to do it. I can introduce any other type of data (amount, prices...) via manual entry but I can´t do the same with dates. Any help about this??
Thanx.

Hi Ortiz,
You can do it like this:
1. Create one variable based on any date field.
2. In you query In column create 1 selection, restrict any key figure with this variable (created above). In display property set Hide.
3. Create 1 formula variable with processing type customer exit and choose dimension as date.
4. Now in CMOD, write the below code for your formula variable:
Suppose the source variable name is ZDATE1,
Forumla var name is ZFinal_date
Code it like this:
when 'ZFinal_date'.
READ TABLE i_t_var_range INTO wa_value WITH KEY vnam = 'ZDATE1'.
        wa_range-low    = wa_value-low.
        wa_range-opt    = 'EQ'.
        wa_range-sign   = 'I'.
        APPEND wa_range TO e_t_range.
Now u will get the date inputed value in your formula cariable.
5. Create 1 CKF and do the subtraction in there:
if ur key figure name is KF1 then type forumal as:
KF1 - ZFinal_date.
Hopefully u wil get the desired output.
Thanks
Dipika

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

How do I create an automator variable for a path that includes a date?

I like to use Image Capture to scan documents into a hierarchy of folders under my ~/Documents directory that are organized by year and document type. For example, I have
~/Documents/archives/2011
     /Misc
     /Utilities
and
~/Documents/archives/2012
     /Misc
     /Utilities
for archiving miscellaneous docs and utilities bills. Now, switching folders in Image Capture is annoying so I want to use the Automator support built into that app to direct the scanned images to ~/Documents/archives/<Current Year>/Misc or ~/Documents/archives/<Current Year>/Utilities. I was able to do this with separate Automator workflows, each with a hard-coded path to the destination folder. For example,
What I would like to do is use an Automator variable to dynamically determine ~/Documents/archives/<Current Year>/Misc. I see variables for Home, Documents, and Current Year.   However, when I try to create a new path variable it only lets me choose a full path to a Finder folder. How do I combine Documents and Current Year variables with the "archives" and "Misc" folder names to create a new path variable?

Well now, you went and made me learn something today. In the Variables Library, under Utilities, is a variable named AppleScript. You can put a small script into this that evaluates to your path, for example:
((((path to documents folder) as text) & "archives:" & (year of (current date)) as text) & ":Utilities") as alias
If the script evaluates to a proper path, it can be used wherever any other path can - you can experiment by looking at the results of a Get Value of Variable action.

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

How to generate an XML Configuration File for EBS Source Type

Hi,
We have installed SES, I want to integrate it to enable for searching repository contracts.
In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
For this source I need to specify the Configuration URL.
Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
Is there any steps on how we can create this XML file.
like I would want to know how we can create the XML file and on which folder on the server should I be putting it
Thanks

Hi there,
We are running into same issue and need the exact same information. Can someone help with this question on priority?
Thanks,
Darshan

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SysGen - no variables for IP source generation

Similar Messages

Maybe you are looking for