Syslogd and SMF properties
I am using the 08/07 distribution of Solaris10 and I am trying to disable logging of remote messages to syslogd but it fails.
First I tried setting the LOG_FROM_REMOTE to NO in +/etc/default/syslogd+ and restarting the daemon. The syslogd man page says that this should cause syslogd modify its config/log_from_remote SMF property, and at the same time comment out the /etc/default/syslogd LOG_FROM_REMOTE entry.
None of these happened. The /etc/default/syslogd entry remains active, and the command +`svcprop -p config/log_from_remote svc:/system/system-log:default`+ returns true.
Now, trying to set the property to false manually, using the command *'svccfg -s svc:/system/system-log:default addpropvalue config/log_from_remote false'*, also fails with the following error:
svccfg: No such property group "config"+
The next thing I tried confused me greately as listed properties for the syslogd service using two different commants produced two different outputs. See below:
$svcprop svc:/system/system-log:default
general/enabled boolean false
general/action_authorization astring solaris.smf.manage.system-log
general/entity_stability astring Unstable
general/single_instance boolean true
config/log_from_remote boolean true _<=== property exists_
config/value_authorization astring solaris.smf.value.system-log
milestone/entities fmri svc:/milestone/sysconfig
milestone/grouping astring require_all
milestone/restart_on astring none
milestone/type astring service
filesystem/entities fmri svc:/system/filesystem/local
filesystem/grouping astring require_all
filesystem/restart_on astring none
filesystem/type astring service
autofs/entities fmri svc:/system/filesystem/autofs
autofs/grouping astring optional_all
autofs/restart_on astring none
autofs/type astring service
name-services/entities fmri svc:/milestone/name-services
name-services/grouping astring require_all
name-services/restart_on astring none
name-services/type astring service
dependents/system-log_single-user fmri svc:/milestone/multi-user
start/exec astring /lib/svc/method/system-log
start/timeout_seconds count 600
start/type astring method
stop/exec astring :kill
stop/timeout_seconds count 60
stop/type astring method
refresh/exec astring :kill\ -HUP
refresh/timeout_seconds count 60
refresh/type astring method
tm_common_name/C ustring system\ log
tm_man_syslogd/manpath astring /usr/share/man
tm_man_syslogd/section astring 1M
tm_man_syslogd/title astring syslogd
restarter/logfile astring /var/svc/log/system-system-log:default.log
restarter/contract count 95
restarter/start_pid count 1075
restarter/start_method_timestamp time 1199463071.956059000
restarter/start_method_waitstatus integer 0
restarter/auxiliary_state astring none
restarter/next_state astring none
restarter/state astring online
restarter/state_timestamp time 1199463071.962706000
restarter_actions/restart integer
Now, using the scscfg command:
$svccfg -s svc:/system/system-log:default listprop
general framework
general/enabled boolean true
restarter framework NONPERSISTENT
restarter/logfile astring /var/svc/log/system-system-log:default.log
restarter/contract count 95
restarter/start_pid count 1075
restarter/start_method_timestamp time 1199463071.956059000
restarter/start_method_waitstatus integer 0
restarter/auxiliary_state astring none
restarter/next_state astring none
restarter/state astring online
restarter/state_timestamp time 1199463071.962706000
restarter_actions framework NONPERSISTENT
restarter_actions/restart integer
The output is totally different; and clearly the config/log_from_remote property is missing from here.
Does anyone know what is wrong?
Thanks.
Hi i faced opposite problem - tried to turn on remote syslog on Solaris Dev Express (11).
Correct command for me: svccfg -s svc:/system/system-log setprop config/log_from_remote=true
Probably for You shoud be : svccfg -s svc:/system/system-log setprop config/log_from_remote=false
it's a bit different syntax than yours.
Good Luck.
Similar Messages
-
How to set buildID.xml and custom.properties in SDK
Hello,
I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
Within the sap note 1484551, you mentioned we need change the
SDKInstallDir/build/buildID.xml file, here is the context of the file:
buildID.xml -
<?xml version="1.0" encoding="UTF-8"?>
<buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
<customer>XXXXXX</customer>
<revision>1.0.0.0</revision>
<build>1</build>
</buildID>
buildID.xml -
1. how can we change the revision and build?
There is another file BuildToolDir/build/script/custom.properties, here
is the file context:
custom.properties----
This file contains build properties used to configure the build
system.
The name of the software vendor implementing the customizations.
vendor.name=xxxxxxxxx
Vendor build identifier. This value is used to uniquely identify
customizations built by a particular vendor for a particular customer
and base
application version.
This is also used in path locations and in naming certain build
artifacts, like the custom EJB module and the utility classes archive.
vendor.id=xxxxxxxxx
The installation of the J2EE engine installed in the development
environment.
ex. C:/usr/sap/CE1\J00
j2ee.instance.dir=J2EEInstanceDir
The web context path used to access the main web application. This
is used by the build to set the
context-root value in application.xml after an update has been
imported.
web.context.path=
The web context path used to access the production XML interface web
application. This is used by the build to set the
context-root value in application.xml after an update has been
imported.
xml.context.path=
The web context path to access resources from the web extension
application, like images and work instruction HTML files.
web-ext.context.path=web-ext
The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
The JDBC driver configured for the application server.
db.drivername=VMJDBC
JDBC connection propertes for the WIP (Work In Process) database.
This is the primary application database.
db.wip.driverclassname=
db.wip.driver.url=
db.wip.host=
db.wip.port=
db.wip.sid=
db.wip.user=
db.wip.password=
JDBC connection propertes for the ODS (Open Data Store) database.
This is the offline reporting and archiving database.
db.ods.driverclassname=
db.ods.driver.url=
db.ods.host=
db.ods.port=
db.ods.sid=
db.ods.user=
db.ods.password=
Flag indicating whether to add DPMO NC codes to NC idat files when a
new update is imported. This value is initially
set by the installer according the the user selection.
dpmo.nc.codes=
The default locale used by the production system. The default locale
is the locale used to display locale
specific text and messages when the requested locale is not
available. This property does not need to
be set if the default locale is english.
default.locale=en
Used when running the build from Eclipse to locate the java compiler
used by the WebLogic EJB compiler.
jdk.home=C:/Program Files/Java/jdk1.5.0_20
Compiler debug mode. If set to 'true', debug symbols will be
compiled into the byte code.
compile.debug=true
Keystore alias
security.alias=xxxxx
Keystore password
security.storepass=ChangeIt
Key password
security.keypass=ChangeIt
Keystore type (jks=default,jceks,pkcs12)
security.storetype=jks
Optional source control build identifier that is to be displayed with
standard version information.
scs.build.ID=
Optional extended version information to be displayed with standard
version information.
ext.info=
custom.properties----
2. How can we change this here?
Regards,
Leon Lu
Edited by: Leon Lu on Aug 4, 2011 11:14 AM
Edited by: Leon Lu on Aug 4, 2011 11:21 AMHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
How to set default Header and Footer properties for PDF
Hi,
Currently we are manually setting the 'PDF and Print Control' properties for each and every dashboard. We understand that print pdf properties are controlled by pdfstyle.fst file under $SAROOTDIR\web\app\res\s_oracle10\b_mozilla_4 but don't have the exact property names to include in header and footer section.
By default, we want to include company logo, the saved name of the report/dashboard tab and created time in the header. And page# in the footer.
Where can we set these and what properties names should be used in order for these to be set for every new request/dashboard that is created.
Thanks and RegardsHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt 2 KB -
why when i download anything thru firefox and try to run it says its not a valid win 32 application and the properties show it is empty
-> Tap ALT key or press F10 to show the Menu Bar
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
If the problem persist check this link:
Unable to download or save files
https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
Check and tell if its working. -
BUG - in flash pro CC, 'bold' and 'italic' properties of TextFormat have no effect on rendered text
Concise problem statement:
If you compile with flash pro CC, and use the 'setTextFormat' method of a TextField, the 'bold' and 'italic' properties of the TextFormat argument have no effect on the rendered text. If you compile with flash pro CS6, the 'bold' and 'italic' properties work as expected.
Apparently, with flash pro CC, the only way to make the text render correctly is to change the font name (add the suffix ' Bold', ' Italic', or ' Bold Italic'.) This means code which dynamically changes font styles only works in CS6 or CC, but not both. For example, if you use the 'bold' property the text renders bold in CS6 and regular in CC, whereas if you change the font name to add the suffix ' Bold', the text renders bold in CC and DOES NOT RENDER at all in CS6. This makes it difficult to transition a team from CS6 to CC.
Steps to reproduce bug:
1. Create an xfl with 2 TextFields on the stage, both with font "Trebuchet MS" and style "regular", one named boldTrueText containing the String "bold = true", one named fontNameText containing the String "fontName = Trebuchet MS Bold". Create 2 more TextFields on the stage for visual reference, both with font "Trebuchet MS", one with style "regular", one with style "bold".
2. Add the following code to the Actions panel on frame 1:
import flash.text.TextFormat;
import flash.text.Font;
var format:TextFormat = boldTrueText.getTextFormat();
format.bold = true;
boldTrueText.setTextFormat(format);
format = fontNameText.getTextFormat();
format.font = "Trebuchet MS Bold";
fontNameText.setTextFormat(format);
var fonts:Array = Font.enumerateFonts(), count:int = fonts.length;
for (var i:int = 0; i < count; i++) {
var font:Font = fonts[i];
trace("fontName: " + font.fontName + ", fontStyle: " + font.fontStyle);
3. Save, and compile with flash pro CS6 and flash pro CC.
Results:
With flash pro CS6, "bold = true" renders bold, and "fontName = Trebuchet MS Bold" DOES NOT RENDER.
With flash pro CS6, the following is traced:
fontName: Trebuchet MS, fontStyle: bold
fontName: Trebuchet MS, fontStyle: regular
With flash pro CC, "bold = true" renders regular, and "fontName = Trebuchet MS Bold" renders bold.
With flash pro CC, the following is traced:
fontName: Trebuchet MS, fontStyle: regular
fontName: Trebuchet MS Bold, fontStyle: bold
Expected results:
The same text is rendered in both flash pro CS6 and CC. I don't know why this behavior was changed in flash pro CC - it causes silent failures in code which dynamically changes font styles. I expected the flash pro CS6 behavior to remain the same in CC, like so:
With flash pro CC, "bold = true" renders bold, and "fontName = Trebuchet MS Bold" DOES NOT RENDER.
With flash pro CC, the following is traced:
fontName: Trebuchet MS, fontStyle: bold
fontName: Trebuchet MS, fontStyle: regular
If you don't want to break backward compatibility (any further), you could make both the behaviors work in flash pro CC, like so:
With flash pro CC, "bold = true" renders bold (font is still "Trebuchet MS"), and "fontName = Trebuchet MS Bold" renders bold also.
With flash pro CC, the following is traced:
fontName: Trebuchet MS, fontStyle: bold
fontName: Trebuchet MS, fontStyle: regular
fontName: Trebuchet MS Bold, fontStyle: bold
I submitted this bug with the bug form, and also with adobe bugbase (in case it isn't obsolete) - I'm just trying to maximize my chances of getting a fix. Has anyone else encountered this bug?I just can't believe how there is ZERO documenation for any of this. Flash's stylesheets have fontStyle and fontWeight properties, but they only recognize regular/italic and regular/bold respectively.
This change in Flash CC completely breaks systems built in Flash CS6, and the font naming is actually arbitrary and is not a consistant combination of font name and style (e.g. "Eras ITC" family's bold font name is "Eras Bold ITC", but the bold version of Times New Roman is "Times New Roman Bold" (with Bold at the end, rather than the middle), and what's absolutely appaling is that the font name used at runtime is not exposed anywhere in the Flash IDE!!! In the IDE you select a font family and font style independently, which is absolutely not what's used at runtime, because it actually uses a separate, arbitrarily named field in the font file for the font name. So we can't even know from within Flash what the proper runtime name is, unless we trace it out or open the font properties details tab in Windows explorer.
It seems that Flash CC is always using the font "Title" that can be found in the properties of the font, NOT the font name displayed in Windows Font Preview or in Flash CC. For example, the font name for Times New Roman Bold in Windows Font Preview is just "Times New Roman", but the font title in the properties/details tab is "Times New Roman Bold". If they made the change to allow for specific fonts to be selected, that's fine, but it completely breaks HTML support in TextFields if it's not respecting bold and italic tags.
This may actually be a trend on the web now, if you read this: http://www.smashingmagazine.com/2013/02/14/setting-weights-and-styles-at-font-face-declara tion/ , it says: "If you’ve used one of FontSquirrel’s amazing @font-face kits, then you’re familiar with this approach to setting weights and styles. The CSS provided in every kit uses a unique font-family name for each weight and style, and sets the weight and style in the @font-face declaration to normal. [...] Notice that the font-family names are unique, with each font-family name accessing the appropriate Web font files."
But there's just no mention of this in any documentation I can find. What the hell.
It's also helpful to realize that font and u tags have been deprecated in HTML5, while b and i tags have been repurposed since they still retain semantic meaning apart from style: https://www.w3.org/International/questions/qa-b-and-i-tags -
Store BP and Item properties in Rows of new table in parallel to columns
Hi Product Development Team,
At present SAP B1 stores BP and Item properties as 64 columns in respective master table.
As the main purpose of property feature is for Reporting and Analysis, Analysis Report developers faces difficulties in preparing analysis report based on properties in the present structure of prperties in column.
I suggest to introduce additional new table (each for Business Partners and Items properties) which contain rows for selected BPs/item's selected properties.
In order to retain present functionality the existing column can remain as it is and also continue to updated as it is.Only additional new table will also get updated and new analysis reports can be build using these newly suggested tables.
Best Regards,
Samir GandhiNo Body responded very strange !!!!!
-
API to access and set properties for MP4 files
I am looking for some APIs in Visual C++ to use in Visual Studio to set
and get properties for .mp4 files. Can anyone help me in this regard?Hi Rahul,
Try using the Windows Media Format SDK with help from the below document:
http://blogs.msdn.com/b/tims/archive/2004/03/28/extracting-metadata-from-windows-media-files.aspx
Alternatively, you can give a try to ffmpeg libraries for a open source alternative.
https://www.ffmpeg.org/download.html
(Please mark as answer if this solves your query. Please upvote if this reply is helpful).
Regards,
Rajesh Nath -
Revision: 14444
Revision: 14444
Author: [email protected]
Date: 2010-02-26 00:38:24 -0800 (Fri, 26 Feb 2010)
Log Message:
DVR, CR feedback: change dvrTrait and timeTrait properties on NetStreamLoadTrait into a generic getTrait/setTrait scheme. Update VideoElement finishLoad method accordingly. Remove createDVRTrait and createTimeTrait methods from NetLoader, and add a 'processFinishLoading' stub (@private), and have DVRCastNetLoader override it in order to add the custom DVRTrait and TimeTrait.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/elements/VideoElement.as
osmf/trunk/framework/OSMF/org/osmf/net/NetLoader.as
osmf/trunk/framework/OSMF/org/osmf/net/NetStreamLoadTrait.as
osmf/trunk/framework/OSMF/org/osmf/net/dvr/DVRCastNetLoader.as -
Revision: 13988
Revision: 13988
Author: [email protected]
Date: 2010-02-05 00:24:52 -0800 (Fri, 05 Feb 2010)
Log Message:
PARB feedback: change mediaWidth and mediaHeight properties on layout renderer related classes to measuredWidth, and measuredHeight.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/composition/CompositeDisplayObjectTrait.as
osmf/trunk/framework/OSMF/org/osmf/containers/MediaContainer.as
osmf/trunk/framework/OSMF/org/osmf/display/MediaContainerGroup.as
osmf/trunk/framework/OSMF/org/osmf/layout/DefaultLayoutRenderer.as
osmf/trunk/framework/OSMF/org/osmf/layout/ILayoutTarget.as
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.as
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutTargetSprite.as
osmf/trunk/framework/OSMF/org/osmf/layout/MediaElementLayoutTarget.as
osmf/trunk/framework/OSMFTest/org/osmf/display/TestMediaContainerGroup.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestDefaultLayoutRenderer.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestLayoutRenderer.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestMediaElementLayoutTarget.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TesterLayoutTargetSprite.asHi Lucas,
We don't recommend making layout renderers for each item that needs to be laid out. In fact you shouldn't be creating layout renderers at all (they are created automatically by the MediaContainer). The best way to layout Media is to add LayoutMetadata to the MediaElements. If you want to integrate layout into your controls, which aren't MediaElements, I wouldn't suggest you place them manually on the stage, and do you yourself. If you absolutely need to use the OSMF layout system, I would recommend creating a MediaElement to wrap your controls, and then give the wrapper the layout metadata you need. The easiest approach though, is to look at the OSMFPlayer example, which has a skinnable player. You can specify image for every button in the player, as well as background color, etc....
We will be releasing a white paper on the subject of layout in the coming weeks. I'll be sure to include a section on laying out your player controls.
Ryan O'Connell
OSMF Engineering -
Bgm.ser and jaxb.properties not created
Is there a particular reason to why the bgm.ser and jaxb.properties files are not created when a schema only consists of a simpletype and I run the binding compiler???
The two files seem to be created when I include a 'dummy' complextype in the schema. Is a complextype needed in order for the files to be created?
Cheers.
Anders
<simpleType name="Values">
<restriction base="string">
<enumeration value="ValueOne"/>
<enumeration value="ValueTwo"/>
<enumeration value="ValueThree"/>
<enumeration value="ValueFour"/>
</restriction>
</simpleType>I've had the same exact problem! I had the property file in my JAR file properly, but the JAXBContext.newInstance( "package.name" ) call was failing - while at the same time I could load the property file via the ClassLoader just fine, by hand.
I played around with source for the jaxb beta a bit and I think I found the problem. I recompiled the JAR file after changing the "fileSep" variable in the "searchforcontextPath" method from "file.separatorChar" to "/".
This seemed to fix the problem. Well, the problem of it not finding the properties file that is... now I've got some kinda non-marshalable exception (but I haven't even spent 3 minutes on that problem yet, as opposed to the hours wasted on this bug).
I'm not sure if this bug only cropped up when running under a Windows env or not (my test was running under JBoss on XP... though I was building/compiling under Linux).
Anyway... to fix this just change that variable.. it's on line 228 (i think... i might have added some debug lines of my own in the code) of the javax/xml/bind/ContextFinder.java file. Then just re-jar it over the old JAR -- oh yeah, you'll need a few Message.property files from the jaxb-api.jar file for the new jar file to work (so make sure you unjar the old file 1st or back it up or whatnot). -
Revision: 14871
Revision: 14871
Author: [email protected]
Date: 2010-03-19 01:05:54 -0700 (Fri, 19 Mar 2010)
Log Message:
Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/height and position set.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.asIf you're just doing it in a back and forth or spiral fashion, you don't need to check whether a square's been filled in. You just go from a start point to an end point. Those points and the squares in between are determined by simple arithmetic.
If you're doing it randomly, I wouldn't use the GUI elements themselves. I'd have, for example, and array of booleans that tells whether each square has been filled in. -
Revision: 21285
Revision: 21285
Author: [email protected]
Date: 2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
Log Message:
Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
Modified Paths:
blazeds/trunk/apps/ds-console/console/ConsoleManager.asRevision: 21285
Revision: 21285
Author: [email protected]
Date: 2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
Log Message:
Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
Modified Paths:
blazeds/trunk/apps/ds-console/console/ConsoleManager.as -
Upon Loading of page, Setting the Top and Left properties of a TextField
Hello again,
I would just like to ask for suggestions on how to successfully set the top and left properties of a Textfield as soon as the page is loaded.
Thru Giri's help, I was able to do this with the push of a button. What I would need to do right now is to set it as soon as the page is loaded.
Thanks!Hi Jim,
It is not clear what you are trying to do here. If you want to set the top and left properties of a component when the page is loaded all you have to do is set it at design time itself. If the properties need to be set the second time the page loads then the code can be used in the event handler which submits the page.
It would help if you could explain the use case for setting the properties of a component when the page is loaded.
Cheers
Giri -
Setting the Top and Left properties during runtime, depending on...
hi guys,
it's me again with the same question, but same scenario...
but probably with a bit clearer detail now...
actually, what i wanna do is that although i have set the top and left properties at design time, as soon as the page opens i wanna be able to do the following:
if ( userlevel == 1 ) {
textfield1.setStyle("top: 100...");
} else if ( userlevel == 2 ) {
textfield1.setStyle("top: 500...");
thanks for your time =)The style properties CAN be set in the prerender call. Unfortunately, the requirement is that the component (text field in your case) has to have an unset property in the Design->properties window. (Or in the actual jsp code, which should be identical).
My main issue with this is SJC2's handling of this in the visual window. If i want to have a lot of components that are designed before run-time but placed during run-time, they all are a mess on the screen. I wish there was another property (in the properties window) that would be a checkbox, like "Use static layout". I, probably like others, am using a layout panel (grid) that has several other components in there. I want to be able to move this set of components at run-time, but to do so, I need to unset the layout panel's style. This causes my inside components to shift to the top left of my page, making a mess in the design window.
If any SJC developers are out there, please help! It would be great to somehow mitigate the static/dynamic properties/display issue. (Like, i want to have buttons with dynamic names (for localization), but basically, i have to have a bunch of blank buttons/text on the screen for all my pages because of the static requirement. At least, MyEclipse and others will put the id value if the text/label value is blank.
Chris
Maybe you are looking for
-
Have tried to uninstall the Adobe Program but it will not let me. I keep getting the 1606 error message. I have went to the Microsoft Help site and it says that the registry may need to be modified. They also advised you that if you do not modify
-
Hi, Frends while generating the sales order to billing document(not related to delivery),,,it is posting in to FI but not posting in to COPA.Can any body give me the solution. Regads Sap Guru [email protected]
-
Can I add comments to a Configuration File?
If so, how? I want to be able to update the values in the file. At the moment I have lines beginning with a semi colon and am reading from the configuration file, but as soon as I enable writing to the file it gets messed up (="" added to the end of
-
I cannot do the trial due to no internet connection but there is.
-
Issues downloading elements 12
after sitting at the computer for a couple hours, the download failed: "An error occurred while processing your request. Reference #97.a655ee3f.1388627581.30d9fadb" i really don't have time to sit through another hours long download, is this the onl