System corrupt message

Everytime I load music onto iTunes and transfer it to my iPod I receive the following message on my computer screen: "The file or directory \iPod_Control\Device\SysInfo is corrupt and unreadable. Please run the Chkdsk utility." The songs seem to load just fine, play in iTunes just fine and play on my iPod just fine. I do run into glitches now and again when loading songs, but nothing serious. I want to check out the problem, if there is one and clear it up. I can't find a Chkdsk utility on my computer and there is nothing like that on the iPod disc that came with my iPod. Can someone suggest what I can do to clear this up?

A search in Apple's iPod support page for "chkdsk" turns up this:
http://docs.info.apple.com/article.html?artnum=300554

Similar Messages

Re: Nokia 9300 System Corrupted message

I am receiving a system corrupted message from my Nokia 9300 phone. I have backed up the device . How can I delete the entire phone contents and reinstall.
Moderator Note: E-mail removed, please use PM and only post once on the boards.
Message Edited by kenken on 09-Oct-2008 11:17 AM

Unfortunately this is something you cannot do on your own, you will need to take the device into a Nokia Repair Centre to hav them re-flash the phone and reload it with the latest software.
Be sure that your backed up contents were not the cause of the problem as if they were when you restore them your phone will be back to square one.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

9300 System Corrupted (Message)

Just taken delivery of a new 9300, everything working fine except when I try to use Messaging/Web or Calender. All i'm getting is the message "System Corrupted". Tried the re-formatting procedure but still the same fault. Any other ideas on solving this problem? Thanks.

Have you tried calling the Nokia support team they are usualy very helpful when you have got through to the Tec support.

"Corrupt" Message

iTunes message of "corrupt" and must "restore". Completed restore process and still receive corrupt message. Erased songs from iPod. Use Vista. Any ideas?

We need to know more, how are we supposed to know what 'Corrupt' means if we don't know when you get the message, in what software, what the full message says, etc.
The dictionary definition for corrupt is :-
"having or showing a willingness to act dishonestly in return for money or personal gain : unscrupulous logging companies assisted by corrupt officials. • evil or morally depraved : the play can do no harm since its audience is already corrupt. See note at depraved . • archaic (of organic or inorganic matter) in a state of decay; rotten or putrid : a corrupt and rotting corpse. 2 (of a text or manuscript) debased or made unreliable by errors or alterations. • (of a computer database or program) having errors introduced. verb [ trans. ] 1 cause to act dishonestly in return for money or personal gain : there is a continuing fear of firms corrupting politicians in the search for contracts. • cause to become morally depraved : he has corrupted the boy. • archaic infect; contaminate : [as adj. ] ( corrupting) the corrupting smell of death. 2 (often be corrupted) change or debase by making errors or unintentional alterations : Epicurus's teachings have since been much corrupted. • cause errors to appear in (a computer program or database) : a program that has somehow corrupted your system files."

Incorrect Corruption Message

I'm having to drop many Photoshop documents into a print publication. These are all stored on an external Firewire 800 drive. Lately, Pages has been giving me messages that some of these image files are corrupted when I try to drop them in. The funny thing is that every other application can open these files and display them correctly. In fact, some of the images that were already in this enormouse file which appeared fine before now are reading as corrupted as well (where once there was an image there is a box with an X through it). This is obviously very frustrating - not only can I not get the images I need in this file, but work I've already done is being lost and doesn't seem to want to fix.
When the problem of images getting Xed popped up, most of them were TIFFs and JPEGs so going into Photoshop and either saving them as a PSD or just using the original PSD file was a fix for the problem. Now, even that is not working when I get the corrupted message on import.
I really don't think these images are corrupted since everything else can work with them. The Pages file might be suspect, but I'm not sure why that would be. I've also had a problem bringing in images that were once EPS file then editted in Photoshop. The EPS layer that was once black lines on white gets inverted to ruin the whole image. The funny thing is, the EPS layer was flatened long ago into a differnt layer. Upon saving these images as something else, I get the corrupted message as well. The same inversion problem has popped up in old Keynote files which used to be fine before I got the new version of that program.
I've done disk repairs on both my internal HD and the external LaCie. I'm hoping someone will tell me this is just a file issue that I can use one of my aforementioned methods as a workaround. However, the fear is that it's a Pages issue we'll have to wait for an update to fix because of the deadline for this project.
Any advice or informed speculation is welcome!

Since I have to get this thing in the the mail today (although it should have been 3 days ago were it not for this problem) I have been going through and adding back in these 100+ images, and then saving each individual page as a PDF, so my work is not lost like before. However, there is been an enormous lag in performance now.
Just selecting an item takes 15+ secs for Pages to recognize teh change, not to mention editing size and position. Dropping in an image may take 2-3 minutes, with me holding the cursor to drag it in for half of that. System performance shows Pages using all the CPU power and memory available (and that's when I'm running just the activity monitor). This makes me think Pages is corrupt. And yet, any other document I create or open in Pages works fine.
I've been going through and getting rid of every slide Pages doesn't like (PSD and some TIFF) and doing a save as from Preview instead of Photoshop. These new Pics never seem to become corrupt. I've tried rebooting the system, running the weekly and monthly clean up scripts, saving the Pages file to the external HD, to no avail. The performance is appalling, so much that I would have moved all the work to photoshop if I didn't have this much vested in this file already and today being a deadline. Even before when it was dropping images it was this bad. Maybe that's the reason for the increase in lag.
I'll try to open the file on the Mac Pro at our University bookstore and see what happens there. Then we'll know if it was the file that has corruptions in it or not.

PSE 8 Setup hangs (80% complete) with checking system profile message

Hello
I have a Elements 8 installation problem (Setup hang with checking system profile message). I'm running Mac OS 10.6.1 on a MacBook Pro (Processor Speed: 3.06 GHz, Memory: 4 GB) purchased mid 2009. I have contacted Adobe support and tried all of their suggestions (open case #181253338). I did reinstall OS x 6.1, ran CS$ clean script, ran cache clean tool, and many reboots. I noticed in the discussions that the install of OS X 6 has, at times, corrupted some files creating install problems. I am at a loss and would enjoy any suggestions on what to try next.

Hi,
Attached are the logs from \library\logs\Adobe\Installers
I cleared out the logs, ran PSE Setup until it hung then did Force Quit on
Setup and attached the logs.
Thanks for your attention,
Gary
From: Ankush Ved <[email protected]>
Reply-To: <[email protected]>
Date: Mon, 16 Nov 2009 07:33:58 -0700
To: Gary Nelson <[email protected]>
Subject: PSE 8 Setup hangs (80% complete) with checking
system profile message
Hi,
Can you please send in the log files which can be obtained from the below
location:
\Library\Logs\Adobe\
There must be log files for the PSE 8 installer. Delete them once and then
try to install PSE 8 again, if you are not able to then attach the newly
created log files in the forum.
Thanks & Regards,
Ankush

Running very low on system memory message

At the suggestion of "the wine snob" I am starting this as a separate thread.
I just started tuning into this forum because on Sunday, I decided that I would try to do something with the vdeo clips that my husband took on a recent trip with a Flip ultra HD and to utilize the opportunity to start to get familiar with Premiere elements 7. The clips had already been imported into the computer, so I brought them in to PREL as files, rather than as video capture.
All day long, the program kept crashing, often preceded by the message in the title of this post (see attachment). By about 6 PM not only did the program crash, but the entire computer crashed to blue screen, ugh!!
This is on a relatively new system, purchased in April, a dell XPS 435T, quad core with 6 gb of ram and an ATI Radeon4870 GDDR5 video card with 1024 mb of video ram running Vista Home Premium 64 bit.
I was ready to pull my hair out. It made no sense to me that I should have such trouble with program and system crashes when a few months back, I was bringing in a lot of old hi 8 video into PREL, on a 4 year old laptop, with a single processor and 2 gb of ram. I made a few short video and never had these issues.
Then it dawned on me that those files all came in as avi files; the Flip video comes in as mp4s. So I googled something like "mp4 premiere elements," and it brought me to this post by Steve Grisetti:
http://forums.adobe.com/thread/437535?tstart=0
So I downloaded the suggested software and converted all of these Flip clips to avi. When I started the new project in PREL, I wasn't sure if I used the correct preset so out of curiosity, I started a new project choosing the HDV 720 p 30 preset and one last time tried using the mp4 clips. PREL crashed again after about 5 minutes if it took that long, preceeded first by the low system memory message.
So then I tried a project using the avi files and guess what. I'm going over an hour here and still have not crashed.
I think it would be helpful if those of you who have had this message could post what kind of clips you have been working on (the file format) as well as the computer specs and operating system. Maybe if any of the Adobe tech support staff peek into this forum, they will see a trend in these posts.
Regards,
Cynthia Merzer

At least you are getting this error message, as it gives one a moment to Save recent edits. At this point, I would do a Save_As and increment by say 01 so if the program does shut down, while doing the Save, you do not run the risk of corrupting your Project. If the Save_As does go well, there is nothing lost, other than the time to reboot and relaunch.
Now, I would definitely look at the "Clean, Lean & Mean Editing Machine" article. Much imporvement can be made to an editing computer, even one just out of the box. Steve G. also has several FAQ articles on optimizing one's system for NLE work and for Vista. All will be useful.
Upon delivery, most purchased computers are at about 20% to 60% of potential. There is usually a ton of bloatware that does nothing for the users, except sap resources. As we add programs, more of this "stuff" is added. As we update and the like, temp files and various elements of detritus will fill the HDD's. I know that it sounds odd that a brand new computer would be filled with "stuff" so early on, but it is a fact of life. At least most mfgr's do not still install AOL "stuff" that is of little use and just takes up room and tons of resources. Still, there are too many similar programs, that cost performance.
Good luck,
Hunt

CC configuration causes freezing and file system corruption

I have received no response for:
http://forums.adobe.com/message/6074118
It is a major issue, can I file an issue/fix request somehow?
Basically it appears that the default configuration when installing the complete product suite causes the OS (OSX Mavericks) to freeze unpredictably and render the system unusable unless shut down and rebooted. This may result in file system corruption and data loss requiring complete reinstall of OS and all products.
Some have mentioned 'drive' is causing this, but I am not familiar with that component and do not see any options to remove or disable such a product in CC.
I do not want any non-essential add-ons (like Bridge?) - just a reliable production configuration so I can get work done.
The risk of having the system 'locked up' or file system corrupted is unacceptable.
Thanks,
Mike

Hi mkrjf,
Please enable root account and try to use Photoshop and let me know if still the same behavior.
Root: http://support.apple.com/kb/PH14281
Regards,
Romit Sinha

Constant "System Overload" messages on one song only

All my other songs work fine but I keep getting the
"Core Audio 'System Overload'" messages on one
particluar song. I have four audio drum tracks, and
one vocal track. I have two instances of Stylus RMX,
one Stylus Trilogy, and one EVB3. I also have a TBO
piano track which is admittedly a very large sample
and broken down into three EXS instances. I did have 2
instances of Space Designer but I ditched them in an
effort to get this song working.
i've been working on this track for longer than i care
to admit and i never had such problems but lately the
only way to get through the song is to have everything
frozen. I can get by with the Kick or the Snare
unfrozen but if i try to listen to them BOTH unfrozen
i immediately get the above message. Makes it nearly impossible to line the tracks up.
I run Logic 7.2.1 on a G5 2x2 w/ 4.5 gig RAM.
Any suggestions?
Thanks, JP
power mac g5 2x2 Mac OS X (10.4.7) logic 7.2.1 4.5 gigs Ram

somethings corrupted, yes.
to migrate: if all midi/Vis are perfectly the way you want them - use export in the file menu to render them.
if they aren't yet, make these into basic midi files and export the midi to the songs folder giving it a unique name.
all other live type audio files - vocals, etc. if cut up into small regions would be better off as one file starting at bar1. make these.
if using a tempo map, take a snap of it (jpg) for reference and take one of the original arrange page as well. just to be sure.
get one of the standard templates that come with the app and use it to start this new version off. there should be no file corruption there.

N97 system error message with profile personalisat...

I hope somebody could help me here. After a long week of reviewing new iphone vs N97 (on the internet). I have opted to go for the N97... so far so good, had similar issues to the ones reported by other users but I am sure it will be a matter of new firmware to fix the buggy situations.
Anyways, my problem is a bug with the sound/ringtone folder I think. When I try to personalise a profile, so I will choose profile<personalise, then when I tap the ringtone icon (in order to change the ringtone) the next screen (select a tone with download sound clips, tones, songs, video clips, sound clips or off options) when I reach this screen, a system error message appears. Clicking on any of the above folders does not result in opening the folder. In other words I am unable to reach the ring tone folders. The same thing happens when attempting to change txt sounds.
Even when I browse the memory via the PC, I dont see any files on sounds folder (both mass and phone memory). I have done a software reinstall (lost the pre installed games ) and it still not solved the problem. Any suggestions?
For now I will have to live with the standard ringtone. I will call nokia support and the mobile phone provider, if the issues are not solved I may consider iphone afterall eventhough I am not a fan of the iphone, but they do seem to have a much stable and more responsive software.

Solved the issue: 7370 format did the job.
The issue must have occured because I synced the phone with my n95 so even with a software reinstall, N97 retained the personal settings (including the corrupted files) so a format got rid of it.

9300 - "System Corrupted"

Last week, I got myself a 9300 Communicator. However, I have failed to access Messaging, Web & Calendar. I keep on getting the message "Note System: Corrupted"
What should I do??? Please help!

Have you tried calling the Nokia support team they are usualy very helpful when you have got through to the Tec support.

System corrupted 9300

just upgraded to 9300 and when i press the calender,web or messaging key all i get is NOTE: System corrupted.
If the system is corrupted how can i reset to factory defaults.
Can anybody out there help
Cheers

You would have to format the handset.
Take the battery out and put it back in then before the NOKIA logo is displayed pres these buttons CNTRL + SHIFT + CHR + F simultaneously, keep holding till a black screen with format on the right handside appears then select Format.
PS- U will loose all data so best sync your calendar and contacts and copy other data via File manager. Doing a backup and rstoring it might repeat the same corrupt system.

System log message Missing: TSL1TE   - Undocumented message CQ9

Hello experts,
Maybe a silly question but does anyone know what the following syslog messages (SM21), which appear at system startup, mean?
Missng:TSL1TE,CQ9):BAPIPAREX_HELP<óÜª##
Missng:TSL1TE,CQ9):BAPIPAREX_HELP
Missng:TSL1TE,CQ9):CUEXp#
Missng:TSL1TE,CQ9):CUEX<óÜª##
Missng:TSL1TE,CQ9):CUKNp#
Missng:TSL1TE,CQ9):CUKN<óÜª##
Missng:TSL1TE,CQ9):CURSCODp#
Missng:TSL1TE,CQ9):CURSCOD<óÜª##
Missng:TSL1TE,CQ9):EDID2p#
Missng:TSL1TE,CQ9):EDID2<óÜª##
Missng:TSL1TE,CQ9):EDID4p#
Missng:TSL1TE,CQ9):EDID4<óÜª##
Missng:TSL1TE,CQ9):EDIDD_OLD<óÜª##
Missng:TSL1TE,CQ9):EDIDD_OLDp#
Missng:TSL1TE,CQ9):T52C5à#
Missng:TSL1TE,CQ9):T52C5<óÜª##
Missng:TSL1TE,CQ9):TPRI_PAR
Missng:TSL1TE,CQ9):TPRI_PAR
Interestingly enough, in our system, T100 only contains messages CQ0 - CQ5.
Thanks!
Judith

Hi Judith,
The language-dependent table TSL1T contains system log messages. These
messages may occur if the syslog message does not exist in the logon
language.
There can be several reasons for missing text: (note 46062.)
      - The language import did not run correctly.
      - The text was not yet translated.
      - A kernel is used whose release is younger than the R/3 System (downward-compatible kernel) and this kernel generates Syslog messages that are not yet in the corresponding R/3 release. Example: R/3 Release 4.6B with kernel 4.6D. If the Release 4.6D kernel generates a Syslog message which is not yet in Release 4.6B, no entry table TSL1T is found.
Some corruption may exist in the syslog, so you should delete it as per SAP Note 45580.
Please try to make sure you have applied the latest kernel patch to remove all the known bug.
Also see SAP Notes:
#46062    Entries with TSL1T in syslog
#45580    How are syslog files deleted?
#761220 SYSLOG: Message.....Missing: TSL1Tx
regards,
Vincent

System error message when trying to preview catalog

Hi there, we are putting together an e-commerce site, and continually get System Error Messages when trying to open the catalog
http://shoprachbjewelry.businesscatalyst.com/black-lemon-collection
An Error Occurred
An error occurred processing your last request.
Please go back and try again.

Now my products are mising under the catagory.
http://shoprachbjewelry.businesscatalyst.com/black-lemon-collection/Bracelets

Error 554-5.6.0 Corrupt message content... when sending emails to other users on same exchange server

Hello
I have a very strange problem at a customer from our company.
The problem happens to only one user on the Exchange 2010 organization (SP3, no additional patches installed, Server is 2008 r2).
When this specific user sends an email to one or more users on the same Exchange organization, he gets sometimes (not always) the following error back:
554-5.6.0 Corrupt message content 554 5.6.0 STOREDRV.Deliver.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. ConversionFailedException:
Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. [Stage: CreateReplay]
So - TNEF, corrupt message Content... I googled the error and checked all the recommended Solutions. The Outlook Client is ok, I have doublechecked it and everything is configured like it has to be.
The Problems happens as above described only for one user when he writes emails to users from one specific Domain on the same Exchange organization (example
[email protected]).
He has this specific contacts in a SharePoint contact list which is connected to his Outlook Client.
Thanks for any help or Information!
Regards

Hi,
According to your description, I understand that one user cannot send message with error “554-5.6.0 Corrupt message content 554 5.6.0”.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether it works or not when send message to external address, how about the OWA?
It seems that message has corrupt content. Is there any 3rd prevent software or Anti-Virus software in Exchange 2010?
Regarding this issue, firstly I would like to explain that content conversion occurs in two places, that are the Store Driver and the Content Conversion stage of Categorization. Since the issue exists in the delivery mail of internal user, the agent that was
used in the process of handling by Store Driver may cause this issue.
Please try to enable pipeline tracing and content conversion tracing to get more details about this error, for your reference:
Content conversion tracing:
http://technet.microsoft.com/en-us/library/bb397226.aspx
Pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125018.aspx
Best Regards,
Allen Wang

System corrupt message

Similar Messages

Maybe you are looking for