System Dump running PYXX_READ_PAYROLL_RESULT

I am trying to extract total gross pay for an employee in the US on ECC 6.0.  I extract RGDIR data and feed the the info into the function module PYXX_READ_PAYROLL_RESULT.  I get a system dump telling me:   Call to FORM "IMPORT_RESULT" is incorrect:   The actual parameter no. 2 has a different data type in the  PERFORM than requested for the FORM "IMPORT_RESULT" in program "%_T04EE0".
The Cluster ID is RU, pernr, seqnr, read only international is blank since I am in the US and the Pay Result structure I am using is PAYUS_RESULT.  I have run this through the debug process and have found that the program automatically replaces the cluster id "RU" with "RX". 
What am I doing wrong?

Did you try etracting this with international cluster?
PARAMETERS: pa_pernr TYPE persno.
DATA: gt_rgdir TYPE TABLE OF pc261 WITH HEADER LINE.
DATA: gt_results TYPE pay99_result.
CALL FUNCTION 'CU_READ_RGDIR'
  EXPORTING
    persnr          = pa_pernr
  TABLES
    in_rgdir        = gt_rgdir[]
  EXCEPTIONS
    no_record_found = 1
    OTHERS          = 2.
READ TABLE gt_rgdir INDEX 1.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
  EXPORTING
    clusterid                    = 'RU'
    employeenumber               = pa_pernr
    sequencenumber               = gt_rgdir-seqnr
    read_only_international      = 'X'
  CHANGING
    payroll_result               = gt_results
  EXCEPTIONS
    illegal_isocode_or_clusterid = 1
    error_generating_import      = 2
    import_mismatch_error        = 3
    subpool_dir_full             = 4
    no_read_authority            = 5
    no_record_found              = 6
    versions_do_not_match        = 7
    error_reading_archive        = 8
    error_reading_relid          = 9
    OTHERS                       = 10.
Also you may try reading the same by means of macros. Please refer [this document|http://itchamps.files.wordpress.com/2007/12/hrcluster_edit.pdf]. All you need is to use include RPC2RUU0 and use macro RP-IMP-C2-RU instead
Regards
Marcin

Similar Messages

  • Skipping system dump : no dump device configured

    Hi all!
    I am new to Solaris, please understand. I receive the following message "skipping system dump : no dump device configured" and my system reboots. After reboot, the system repeats the initial installation.
    My IDE config:
    Primary Master - disabled (power disco'd from 8.4GB with W98)
    Primary Slave - enabled 3.8GB hdd, no format, no partition - this is the drive i want to install to
    Secondary Master - none
    Secondary Slave - CD drive that boots
    I have checked the HCL, my system is compatible.
    I have used the installer cd & disk 1 to no avail.
    Do I need to format my hdd that i want to install solaris on before i run the installer?
    if so, how?
    I have tried to create a boot disk but it failed. DD.EXE - does it need to need to be executed in a true DOS mode?
    any help would be greatly appreciated, i will monitor this thread.
    thanks!

    I was having the same proplem as u but now Im just a few steps infront.
    I found a sorta fix by searching this forum. It got me past the initial system reboots anyway. I've only installed one cd so far and now Im back cause of more problems - so don't expect it to get any easier ;)
    Anyway check out this link. It goes on about P4s but apparently other systems are affected too e.g. I have a PII.
    http://groups.google.com/groups?q=solaris+p4+setup_mca+kadb&hl=en&safe=off&rnum=1&selm=wyn1925hxr.fsf%40leo.tools.intra
    HTH from another lost soul

  • System dumps when i try to upgrade from any bootcamp version greater than 3.2 any solutions?

    late 2009 quadcor i7 running mountain lion and win7 pro 64 bit.  No multiple display adapters in the device manager and no hardware conflicts. I'm getting the blue screen of death system dump which won't even allow me to reboot in safemode.

    Firefox 4+ versions aren't compatible with the Power PC architecture, they need an Intel chip.
    For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/<br />
    http://tenfourfox.blogspot.com/ <br />
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  • Backup message error -SAP system is running or SAP user is connected to dat

    Hello ..
    when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
    BR0262I Enter database user name[/password]:
    BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
    BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
    BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
    BR1025I Please shut down SAP system first or use the 'offline_force' option
    BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
    BR0054I BRBACKUP terminated with errors
    [Major] From:  "OMNISAP" Time: 08/08/10 05:31:49
    BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
    i am new on this, what should i review into the db?
    Regards and thanks in advance
    Dma.

    Hello Daniela,
    you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
    This is also described in the official documentation:
    http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
    offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
    Regards
    Stefan

  • I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

  • 'Your system has run out of application memory'?!

    I've seen many users experiencing this same problem throughout the community, but none of the fixes have given me a permanent solution. Details of the machine are below, as well as what happens when the problem hits/triggers.
    MBP Retina running OS X Yosemite 10.10.2 (occurred in previous versions as well, thought the latest update would help but it didn't)
    15-Inches Mid 2014 with 16 GB of Ram
    Been using this Mac for good 6 months now, and one fine day of normal usage the whole system seems really laggy and slow and all of a sudden i'm unable to access anything and barely move my mouse. Then, a window pops out, telling me "Your system has run out of application memory", gracefully showing me that I have to force quit all my programmes for me to just stare at my desktop in utter disappointment.
    I've been using Yosemite for awhile now (updated few days since the release) and haven't encountered any major issues, this being the first. Reading through many threads many have said that the problem lies with opening the Mail app, yet I haven't touched that app in months. I've also tried resetting the PRAM on my machine when it happens and the problem comes back again after several minutes of normal usage (iTunes, App Store). Checking the memory usage with the Memory Clean app, it tells me I'm down to a measly '15.58 MB' of memory, and it justfluctuates at that until I give it a restart again. This can't keep happening - I can barely use the Mac for 10 minutes without having to restart it, only to be able to use it only again for another 10 minutes.
    Opening Activity Monitor tells me that mds_stores is the main root of the problem, yet I can't seem to shut the process down. I've googled and many say that mds_stores is spotlight indexing, but taking up all 16 GB of ram? That shouldn't be the case. Is there a fix to this? Does Apple know of its existence?
    Included some screenshots below:

    Step 1
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. 
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.
    Step 2
    Enter the following command as in Step 1 and post the output:
    mdutil -as 2>&- | pbcopy
    You can then quit Terminal.
    Step 3
    Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

  • [Forum FAQ] Reporting Service Point cannot be installed on a Site System Server running SQL Server 2012 SP1

    Symptom: When you install Reporting Service Point role on a Site System Server running SQL Server
    2012 SP1, you may encounter an issue that the Reporting Service Point role cannot be installed. The error log “srsrpMSI.log” and “srsrpsetup.log” may throw the error as shown in Figure 1 and Figure 2.
    03:32:03:764]:
    MainEngineThread is returning 1618
    Figure 1: Error -1
    <03/03/14 03:32:03>
    srsrp.msi exited with return code: 1618
    Figure 2: Error -2
    Reason: All the two logs indicate an error return code 1618. From the KB below you may know what
    the return code means.
    ERROR_INSTALL_ALREADY RUNNING 
    1618
    Another installation is already in progress. Complete that installation before proceeding with this install.
    KB link:
    http://support.microsoft.com/kb/290158 “it is related to an Office Suite KB, anyway, the MSI return code is the same meaning”
    You can look into Resource Manager and Event Viewer to find the other currently running MSI installation. You may get a warning in Event Log that means the MSI wants to install a SQL Server
    related Component (Figure 3). The Resource Manager confirms this (Figure 4).
    Event Log:
    Event ID: 1004
    Source: Msinstaller
    Level: Warning
    Detection of product '{A7037EB2-F953-4B12-B843-195F4D988DA1}',
    feature 'SQL_Tools_ANS', component '{0CECE655-2A0F-4593-AF4B-EFC31D622982}' failed.  The resource '' does not exist.
    Figure 3: Event Log
    Figure 4: Resource Manager
    Resolution: the error is exactly what the following KB describes.
    KB Link:
    http://support.microsoft.com/kb/2793634
    After we resolve the SQL Server 2012 issue, the Reporting Service Role is installed successfully.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
    ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
    Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
    If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

  • System is running very slow. any solution?

    system is running very slow. any solution?

    27-inch, Mid 2011; 2.7 GHz Intel Core i5; 4 GB 1333 MHz DDR3
    Software: OS X 10.9.1 (13842)

  • How do we determine if the BW system is running  slow?

    Dear BWers,
    How do we determine if the BW system is running slow? I have a situation where it is taking about 1 hr 30 min to load 700,000 records from the application server with direct mapping and no major transformations. How do i conclude if my BW system is running slow? Is there any documentation on this or benchmarks to analyze this? All and any help is appreciated.
    Thanks
    Raj

    The time taken to load depends on a few factors like the following:
    1. network bandwidth
    2. system memory on the application server.
    3. available processes in the application server to start the job
    Make sure to load the master data, activate them and also apply change run before you load the transaction data. If you have secondary indexes, make sure you delete them before laoding data. I will suggest to have sequential load and put all the processes in a process chain. Where ever you can, try to split the package size. But in your case, the no of records is not that much and so you should be fine with one info package.
    Ravi Thothadri

  • System Process Running out of Control - Overheating!

    The other day I arrived home and went to check my e mail and found my computer running at full tilt with the fans going all out and the case quite hot.  I thought maybe I had left dashboard open all day as I have done this before with similar results, but this was not the case.  
    I quit all programs and re started and the computer started to run at close to full process.  
    I ran software update and installed the RAW and system update that was available, re started still there.  I ran disk utility to check/repair permissions until they were good.  
    I ran the onyx cleaning set of stuff that clears cashes and histories.  
    When looking at the process monitor it shows the processor running at close to 3/4 but even with programs open in the background it shows them using little to none as expected with the process monitor on top of the list using some processor, but the little color chart below that shows process separated by programs and system show the system process running quite high.  
    Lastly I noted that when I restart and then let the computer sit for a few minutes at the log in screen  the system must be running hard again because the fans come on.  I do not know what is causing this or what next step I should take to remediate it, please help!
    Jerome

    Hi, C Jerome. If your Powerbook were actually overheating, it would put itself to sleep, so you needn't worry that it's in danger of damaging itself. I can understand your interest in calming and quieting it, though.
    First, how full is your hard drive? At least 10% of its capacity or 5GB, whichever is larger, should be free at all times. If you get down to much less than that, the processor and hard drive must work very hard cycling data in and out of virtual memory, and you run a substantial risk of system crashes, hard drive directory corruption and consequent loss of data.
    Do you have disk indexing turned on? Indexing your drive is only useful if you use Find By Content searches (I'm not sure that's what Spotlight calls them, because I don't use Tiger). Indexing can consume an enormous amount of processor cycles and generate a lot of heat, in addition to taking up a significant amount of hard drive space. If you don't need it, turn it off.

  • I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    That's a very broad question and difficult to answer without knowing more about you requirements.
    Try starting on this page Category review: library management software for the Mac |Part I  and part II  to get a starting point.
    regards

  • ALTER SYSTEM DUMP DATAFILE in 10g

    Hi all,
    When I refered to the the documentation "Oracle Database SQL Reference 10g Release 2 (10.2)"
    to obtain information about the command "ALTER SYSTEM DUMP DATAFILE", I did not see it there.
    Is it obsolete?
    http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_2013.htm#i2053602
    Actually, when I tested it, I did not see any trace file generated.
    Any guideline is appreciated.

    Which OS are you on?
    However, ALTER SYSTEM DUMP DATAFILE commands works with 10g, no issues.
    Do the following:
    ALTER SESSION SET TRACEFILE_IDENTIFIER = 'DUMPFILE';
    ALTER SYSDATE DUMP DATAFILE 'FILE.DBF' BLOCK 1;
    and now look into your dump you will have file name with prefix as DUMPFILE.
    Jaffar

  • Solman system DUMP after SPS 11 import proper phase

    Hello
    I have a problem with Solman 7.1 fresh install to  SPS11 upgrade, system hang in IMPORT_PROPER phase via SAINT, now system DUMP with all transactions
    Category          
    ABAP Programming Error
    Runtime Errors    
    SYNTAX_ERROR
    ABAP Program      
    SAPLSLVC
    Application Component  BC-SRV-ALV
    Date and Time     
    20.05.2014 07:48:50
    Short text
    Syntax error in program "SAPLSLVC ".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLSLVC " in include "LS
    " in
    line 73:
    "Le type 'BADI_ALV_GRID' est inconnu."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    The following syntax error was found in the program SAPLSLVC :
    "Le type 'BADI_ALV_GRID' est inconnu."
    Thanks for your support
    Eric

    Hello
    Thanks for your answer, I've found the following error and tried to update R3trans but the issu is the same:
    Main import
    Transport request   : SAPK-1507YINSTPL
    System              : SSM
    tp path             : tp
    Version and release: 380.08.46 721
    R3trans version 6.24 (release 721 - 16.04.14 - 20:14:04).
    unicode enabled version
    ===============================================
    date&time   : 20.05.2014 - 03:26:04
    control file: /usr/sap/trans/tmp/SAPKK-1507YINSTPL.SSM
    > #pid 8530 on sap-ssm (ssmadm)
    > import
    > buffersync=yes
    > file='/usr/sap/trans/data/R-1507YINSTPL.SAP'
    > continuation='/usr/sap/trans/data/R-1507YINSTPL_#.SAP'
    > client cascade yes
    > watchparallelprocesses yes
    >
    > excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP
    R3trans was called as follows: R3trans -w /usr/sap/trans/tmp/SAPI-1507YINSTPL.SSM /usr/sap/trans/tmp/SAPKK-1507YINSTPL.SSM
    R3trans received signal 9 from operating system.
    Main import
    End date and time : 20140520034412
    Ended with return code:  ===> 13 <===
    Eric

  • Error -2147024714 : Automation Error the operating system cannot run %1'

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

  • When the PC System timing runs as per normal, reaches 0000hrs - a new date. How to Auto re-execute the VI from its first sequence order?

    When the PC System timing runs as per normal, reaches 0000hrs - a new date. How to Auto re-execute the VI from its first sequence order?

    Duplicate Post

Maybe you are looking for