System failure after recent update.

Hello. I just ran pacman -Syu on one of my systems and now the console screen resolution is down to low (default linux not what Arch is normally set to) and the network won't come up.
journalctl -xe gives the error of
Job sys-subsystem-net-devices-enp0s4fu4.device/start failed with result 'timeout' <- an USB network card
Job sys-subsystem-net-devices-enp5s0.device/start timed out <- Internal eth0 card.
~ # pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (20) curl-7.41.0-1 e2fsprogs-1.42.12-2 gnupg-2.1.2-2 iproute2-3.19.0-1 kmod-20-1 libtasn1-4.3-1 libutil-linux-2.26.1-3 linux-3.19.2-1 logrotate-3.8.9-1 lua-5.2.4-1
openssh-6.8p1-2 openssl-1.0.2.a-1 pacman-mirrorlist-20150315-1 patch-2.7.5-1 shadow-4.2.1-3 tcpdump-4.7.3-1 unzip-6.0-10 util-linux-2.26.1-3 vim-minimal-7.4.663-1
vim-runtime-7.4.663-1
Total Download Size: 72.29 MiB
Total Installed Size: 141.58 MiB
Net Upgrade Size: 1.86 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
openssl-1.0.2.a-1-x86_64 2.6 MiB 1292K/s 00:02 [#####################################################################] 100%
libutil-linux-2.26.1-3-x86_64 295.2 KiB 523K/s 00:01 [#####################################################################] 100%
e2fsprogs-1.42.12-2-x86_64 757.1 KiB 2.38M/s 00:00 [#####################################################################] 100%
libtasn1-4.3-1-x86_64 104.8 KiB 6.02M/s 00:00 [#####################################################################] 100%
curl-7.41.0-1-x86_64 721.3 KiB 4.49M/s 00:00 [#####################################################################] 100%
gnupg-2.1.2-2-x86_64 1840.7 KiB 4.14M/s 00:00 [#####################################################################] 100%
iproute2-3.19.0-1-x86_64 510.1 KiB 4.66M/s 00:00 [#####################################################################] 100%
kmod-20-1-x86_64 108.4 KiB 5.29M/s 00:00 [#####################################################################] 100%
shadow-4.2.1-3-x86_64 1071.6 KiB 4.55M/s 00:00 [#####################################################################] 100%
util-linux-2.26.1-3-x86_64 1631.3 KiB 4.77M/s 00:00 [#####################################################################] 100%
linux-3.19.2-1-x86_64 55.5 MiB 4.73M/s 00:12 [#####################################################################] 100%
logrotate-3.8.9-1-x86_64 33.7 KiB 5.48M/s 00:00 [#####################################################################] 100%
openssh-6.8p1-2-x86_64 703.9 KiB 4.91M/s 00:00 [#####################################################################] 100%
pacman-mirrorlist-20150315-1-any 3.3 KiB 0.00B/s 00:00 [#####################################################################] 100%
patch-2.7.5-1-x86_64 79.2 KiB 4.55M/s 00:00 [#####################################################################] 100%
lua-5.2.4-1-x86_64 197.8 KiB 560K/s 00:00 [#####################################################################] 100%
tcpdump-4.7.3-1-x86_64 317.4 KiB 1644K/s 00:00 [#####################################################################] 100%
unzip-6.0-10-x86_64 125.2 KiB 5.32M/s 00:00 [#####################################################################] 100%
vim-runtime-7.4.663-1-x86_64 4.8 MiB 5.00M/s 00:01 [#####################################################################] 100%
vim-minimal-7.4.663-1-x86_64 1078.4 KiB 5.01M/s 00:00 [#####################################################################] 100%
(20/20) checking keys in keyring [#####################################################################] 100%
(20/20) checking package integrity [#####################################################################] 100%
(20/20) loading package files [#####################################################################] 100%
(20/20) checking for file conflicts [#####################################################################] 100%
(20/20) checking available disk space [#####################################################################] 100%
( 1/20) upgrading openssl [#####################################################################] 100%
( 2/20) upgrading libutil-linux [#####################################################################] 100%
( 3/20) upgrading e2fsprogs [#####################################################################] 100%
( 4/20) upgrading libtasn1 [#####################################################################] 100%
( 5/20) upgrading curl [#####################################################################] 100%
( 6/20) upgrading gnupg [#####################################################################] 100%
( 7/20) upgrading iproute2 [#####################################################################] 100%
( 8/20) upgrading kmod [#####################################################################] 100%
( 9/20) upgrading shadow [#####################################################################] 100%
==> Warning: /etc/group or /etc/gshadow are inconsistent.
Run 'grpck' to correct this.
(10/20) upgrading util-linux [#####################################################################] 100%
(11/20) upgrading linux [#####################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.19.2-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [encrypt]
-> Running build hook: [lvm2]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.19.2-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
-> Running build hook: [encrypt]
-> Running build hook: [lvm2]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
(12/20) upgrading logrotate [#####################################################################] 100%
(13/20) upgrading lua [#####################################################################] 100%
(14/20) upgrading openssh [#####################################################################] 100%
warning: /etc/ssh/sshd_config installed as /etc/ssh/sshd_config.pacnew
(15/20) upgrading pacman-mirrorlist [#####################################################################] 100%
warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
(16/20) upgrading patch [#####################################################################] 100%
(17/20) upgrading tcpdump [#####################################################################] 100%
(18/20) upgrading unzip [#####################################################################] 100%
(19/20) upgrading vim-runtime [#####################################################################] 100%
(20/20) upgrading vim-minimal [#####################################################################] 100%
~ # reboot

Fairly I didn't set up anything in the tty, it's the same setting Arch boots from CD so I always thought it just takes it from default settings.
BTW I just found, that the pacman cache has two versions of the Linux kernel 3.18 and 3.19 but only one version of linux-api-headers which is the same sub as that of the working kernel: 3.18.
Could this cause the problem that there is no 3.19 kernel headers or are they not simultaneously updated with the kernel?
As for the bugtrack link you gave, I don't know if it's related. In the comments they say its possible to load the module but then after a short connection time it went down, however in my case it does not get loaded at all as I see in journalctl -b
Last edited by piwwo (2015-03-25 14:26:20)

Similar Messages

[SOLVED] System breakage after recent update

Hi.
After recent system updates with "pacman -Syu" various packages have broken.
For example chromium either crashes on start or does not load pages:
~ % chromium
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
third_party/tcmalloc/chromium/src/central_freelist.cc:319] tcmalloc: allocation failed 4096
[11:11:1108/215509:FATAL:process_util_linux.cc(685)] Out of memory.
[1370:1396:1108/215517:ERROR:child_process_launcher.cc(283)] Failed to launch child process
~ % chromium
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
# Fatal error in v8::Context::New()
# V8 is no longer usable
[1480:1504:1108/215533:ERROR:child_process_launcher.cc(283)] Failed to launch child process
Also kwrite crashes on start.
Also KDE plasma desktop does not start telling about KWin crashes.
Also Kile says "[PDFLaTeX] failed to start]" when I try to produce .pdf from .tex.
Here is my update log:
[2012-11-05 02:18] Running 'pacman-color -Syu'
[2012-11-05 02:18] synchronizing package lists
[2012-11-05 02:18] starting full system upgrade
[2012-11-05 02:18] upgraded bash (4.2.037-1 -> 4.2.039-1)
[2012-11-05 02:19] upgraded opencv (2.4.2-5 -> 2.4.3-1)
[2012-11-05 02:19] upgraded qt (4.8.3-4 -> 4.8.3-5)
[2012-11-05 02:19] upgraded tightvnc (1.3.10-8 -> 1.3.10-9)
[2012-11-05 12:27] Running 'pacman-color -Syu'
[2012-11-05 12:27] synchronizing package lists
[2012-11-05 12:27] starting full system upgrade
[2012-11-07 08:58] Running 'pacman-color -Syu'
[2012-11-07 08:58] synchronizing package lists
[2012-11-07 08:58] starting full system upgrade
[2012-11-07 09:28] Running 'pacman-color -Syu'
[2012-11-07 09:28] synchronizing package lists
[2012-11-07 09:28] starting full system upgrade
[2012-11-07 09:28] upgraded cairo (1.12.6-2 -> 1.12.8-1)
[2012-11-07 09:28] upgraded flashplugin (11.2.202.243-1 -> 11.2.202.251-1)
[2012-11-07 09:28] upgraded glibmm (2.34.0-1 -> 2.34.1-1)
[2012-11-07 09:28] upgraded htop (1.0.1-1 -> 1.0.2-1)
[2012-11-07 09:28] upgraded iputils (20121011-1 -> 20121011-2)
[2012-11-07 09:28] upgraded nvidia-utils (304.60-1 -> 304.64-1)
[2012-11-07 09:29] upgraded lib32-nvidia-utils (304.60-1 -> 304.64-1)
[2012-11-07 09:29] upgraded libtirpc (0.2.2-2 -> 0.2.2-4)
[2012-11-07 09:29] >>> Updating module dependencies. Please wait ...
[2012-11-07 09:29] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-11-07 09:29] ==> Building image from preset: 'default'
[2012-11-07 09:29] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-11-07 09:29] ==> Starting build: 3.6.6-1-ARCH
[2012-11-07 09:29] -> Running build hook: [base]
[2012-11-07 09:29] -> Running build hook: [udev]
[2012-11-07 09:29] -> Running build hook: [pata]
[2012-11-07 09:29] -> Running build hook: [scsi]
[2012-11-07 09:29] -> Running build hook: [sata]
[2012-11-07 09:29] -> Running build hook: [filesystems]
[2012-11-07 09:29] -> Running build hook: [usbinput]
[2012-11-07 09:29] -> Running build hook: [fsck]
[2012-11-07 09:29] -> Running build hook: [consolefont]
[2012-11-07 09:29] -> Running build hook: [keymap]
[2012-11-07 09:29] ==> Generating module dependencies
[2012-11-07 09:29] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-11-07 09:29] ==> Image generation successful
[2012-11-07 09:29] ==> Building image from preset: 'fallback'
[2012-11-07 09:29] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-11-07 09:29] ==> Starting build: 3.6.6-1-ARCH
[2012-11-07 09:29] -> Running build hook: [base]
[2012-11-07 09:29] -> Running build hook: [udev]
[2012-11-07 09:29] -> Running build hook: [pata]
[2012-11-07 09:29] -> Running build hook: [scsi]
[2012-11-07 09:29] -> Running build hook: [sata]
[2012-11-07 09:29] -> Running build hook: [filesystems]
[2012-11-07 09:29] -> Running build hook: [usbinput]
[2012-11-07 09:29] -> Running build hook: [fsck]
[2012-11-07 09:29] -> Running build hook: [consolefont]
[2012-11-07 09:29] -> Running build hook: [keymap]
[2012-11-07 09:29] ==> Generating module dependencies
[2012-11-07 09:29] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-11-07 09:29] ==> Image generation successful
[2012-11-07 09:29] upgraded linux (3.6.5-1 -> 3.6.6-1)
[2012-11-07 09:29] upgraded live-media (2012.10.24-1 -> 2012.11.05-1)
[2012-11-07 09:29] upgraded perl (5.16.1-2 -> 5.16.2-1)
[2012-11-07 09:29] upgraded lm_sensors (3.3.2-5 -> 3.3.3-1)
[2012-11-07 09:29] upgraded nvidia (304.60-3 -> 304.64-1)
[2012-11-07 09:29] upgraded optipng (0.7.3-1 -> 0.7.4-1)
[2012-11-07 09:29] upgraded subversion (1.7.7-1 -> 1.7.7-2)
[2012-11-07 09:29] upgraded tdb (1.2.10-1 -> 1.2.10-2)
[2012-11-07 21:05] Running 'pacman-color -Syu'
[2012-11-07 21:05] synchronizing package lists
[2012-11-07 21:05] starting full system upgrade
[2012-11-07 21:05] upgraded chromium (22.0.1229.94-1 -> 23.0.1271.64-1)
[2012-11-07 21:05] upgraded libcanberra (0.30-1 -> 0.30-2)
[2012-11-07 22:27] Running 'pacman-color -Syu'
[2012-11-07 22:27] synchronizing package lists
[2012-11-07 22:27] starting full system upgrade
[2012-11-07 22:27] Running 'pacman-color -Syu'
[2012-11-07 22:27] synchronizing package lists
[2012-11-07 22:27] starting full system upgrade
[2012-11-07 22:30] Running 'pacman-color -S reflector'
[2012-11-07 22:31] installed reflector (2012.10-1)
[2012-11-07 22:32] Running 'pacman-color -Syu'
[2012-11-07 22:32] synchronizing package lists
[2012-11-07 22:32] starting full system upgrade
[2012-11-07 22:33] Running 'pacman-color -Rsn reflector'
[2012-11-07 22:33] removed reflector (2012.10-1)
[2012-11-07 22:33] Running 'pacman-color -Syu'
[2012-11-07 22:33] synchronizing package lists
[2012-11-07 22:33] starting full system upgrade
[2012-11-07 22:33] Running 'pacman-color -Syu'
[2012-11-07 22:33] synchronizing package lists
[2012-11-07 22:33] starting full system upgrade
[2012-11-08 00:32] Running 'pacman-color -Syu'
[2012-11-08 00:32] synchronizing package lists
[2012-11-08 00:32] starting full system upgrade
[2012-11-08 01:05] Running 'pacman-color -Syu'
[2012-11-08 01:05] synchronizing package lists
[2012-11-08 01:05] starting full system upgrade
[2012-11-08 08:54] Running 'pacman-color -Syu'
[2012-11-08 08:54] synchronizing package lists
[2012-11-08 08:54] starting full system upgrade
[2012-11-08 21:33] Running 'pacman-color -Syu'
[2012-11-08 21:33] synchronizing package lists
[2012-11-08 21:33] starting full system upgrade
[2012-11-08 21:34] upgraded libmikmod (3.1.12-4 -> 3.2.0-1)
Last edited by vmat (2012-12-24 20:10:47)

More crashes of chromium:
~ % chromium
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
[2666:2692:1108/223202:ERROR:child_process_launcher.cc(283)] Failed to launch child process
# Fatal error in v8/src/store-buffer.cc, line 82
# [2666:2683:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
CHECK(old_virtual_memory_->Commit( reinterpret_cast<void*>(old_start_), (old_limit_ - old_start_) * kPointerSize, false)) failed
==== Stack trace is not available ==========================
==== Isolate for the thread is not initialized =============
[2666:2682:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[2666:2683:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[2666:2682:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[2666:2683:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[11:11:1108/223202:FATAL:process_util_linux.cc(685)] Out of memory.
# Fatal error in v8/src/store-buffer.cc, line 98
# CHECK(virtual_memory_->Commit(reinterpret_cast<Address>(start_), kStoreBufferSize, false)) failed
==== Stack trace is not available ==========================
==== Isolate for the thread is not initialized =============
[2666:2692:1108/223210:ERROR:child_process_launcher.cc(283)] Failed to launch child process
~ % firefox
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
out of memory
~ % free -m
total used free shared buffers cached
Mem: 3923 1537 2385 0 74 865
-/+ buffers/cache: 598 3325
Also kile crashed a few times, so as gwenview.

System crash after recent update

Hi all,
As of yesterday, my laptop has started crashing after a little while open (sometimes right away, sometimes ten minutes in, sometimes right after bios). I believed it was to do with the recent alsa-utils update and I downgraded that package which helped for a little bit. When it updated again and the core dump from the previous update disappeared, I upgraded and the problem starting happening again. Then I downgraded and no change.
So I think it is not to do with alsa anymore...but I can find no information at all in dmesg or journalctl. There seem to be no errors, warnings whatsoever. I have tried chrooting in and looking at all the logs but to no avail.
The update that broke my system installed the following:
alsa-lib alsa-utils gcc-libs gcc isl kmod libcdio-paranoia pyalpm namcap
I have since downgraded both isl and kmod and it looks my laptop is running okay so far. After this update I also updated the kernel, but running from the fallback initramfs did not change the issue so I don't think it was that either.
I have trawled the forums for recent problems with recent updates .ut did not find anything apart from the alsactl core dump.
Does anyone know if there are any problems with the above packages? Or if there are other important logs other than journactl, dmesg, and pacman.log I can try looking at to troubleshoot this? I apologise for not being able to provide much more information, as I said I can't seem to find anything out of the ordinary in the aforementioned logs.
Any help would be appreciated.

Crash still occurs...now found this in dmesg
[ 2.425173] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[ 2.425179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425250] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 2.425254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425258] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.425260] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425261] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.425263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425264] lpc_ich: Resource conflict(s) found affecting gpio_ich
I have looked online about these though, and so far it looks like it doesn't actually make anyone crash
EDIT: Also found that this is not actually a kernel bug...hmm.
Last edited by thesystematic (2013-04-16 00:51:03)

System failure after critical updates auto downloaded on HP-DV7 17.3" AMD Quad Core

After critical updates system auto reboot closed programs and went into reboot mode but system will not reboot and cannot run recovery successfully. Windows tries to load files and get to the start windows screen but will not complete. Not sure if it will bring me back to orig. format, was not able to find a restore point and do not have any reboot disks. Still under warranty but no list of available service people in area. Easy to buy hard to get service! UGH! HELP PLEASE. Thanks

Hi:
Make your own windows 7 repair/reinstallation disk and use the repair option to see if you can get it fixed.
Use the repair with command prompt method and try the fixboot command.
http://support.microsoft.com/kb/927392
Here's how to make a W7 installation/repair disk.
I just copy and paste my standard instructions for using this disk to reinstall windows.
You don't need to enter the product key to repair windows, only to use this disk as a last resort to reinstall windows.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Ntlmaps not running after recent update. (FIXED)

FIXED - Ended up re-writing MAKEPKG, depends, modified patches file and new MD5 sums to build on Python 2.7. Instructions below for anyone who needs them. Cheers - Arkay.
Hi All,
I use ntlmaps in conjunction with corkscrew to create ssh tunnels out through my work proxy to my home network. It's always worked perfectly fine until a recent pacman -Syu.
From looking into it as much as I can it appears that Python 3 has been pulled into the mix where ntlmaps appears only to work with python 2.
In the original effort to fix it I updated to the latest MAKEPKG in the AUR which also doesn't seem to work with either version of Python.
I've attempted to debug the issues in Python though my knowledge of the language is sorely lacking.
The initial error I get is:
File "/usr/bin/ntlmaps", line 31
print 'NTLM authorization Proxy Server v%s' % conf['GENERAL']['VERSION']
^
SyntaxError: invalid syntax
But the code block above appears ok to me. On further investigation (running it line by line in interactive mode), it appeared to be the includes causing the issue at which point I found dos line endings on all the code in the site-python ntlmaps code. After removing all of them and converting back to unix eol's (didn't seem to really make a difference), I still get the same syntax errors. Further looking finds includes to libraries which possibly no longer exist or are depreciated in python 3. "threads" seems to be the main offender, according to the doco it is depreciated but should still work (tm).
I'm pretty much at a loss as to what to do next. I've tried swapping to cntlm but for some reason our proxy won't allow the connections through the way ntlmaps does.
I also just tried to re-install it with aurget. The makepkg worked but the install script failed with:
Byte compiling python modules...
error: command failed to execute correctly
Looking into that now too...
Any help would be much appreciated. Perhaps someone else can attempt to install and run it on their system.
Cheers,
Arkay.
P.S. My system is i686, recently updated.
P.P.S. Apologies to the mods. This should most likely be in the PKGBUILD forms... Please move and remove this P.P.S
Last edited by arkay (2010-10-26 01:00:09)

Ok. For some reason I haven't (yet) been able to get the PKGBUILD working with python 3.
I have however updated everything to work as expected with python 2.7 (specifically ntlmaps-0.9.9.0.1 under python2 2.7-2).
Here's the relevant bits for anyone who would like to build against 2.7 instead (if you have problems with 3).
Filename: PKGBUILD
# Contributor: Graziano <[email protected]>
# Maintainer: John Gerritse <[email protected]>
pkgname=ntlmaps
pkgver=0.9.9.0.1
pkgrel=5
pkgdesc="'NTLM Authorization Proxy Server' (APS) is a proxy software that allows you to authenticate via an MS Proxy Server using the proprietary NTLM protocol."
url="http://ntlmaps.sourceforge.net/"
license="GPL"
arch=('i686' 'x86_64')
depends=('python2')
backup=('etc/conf.d/ntlmaps')
install=$pkgname.install
source=(http://downloads.sourceforge.net/sourceforge/$pkgname/${pkgname}-${pkgver}.tar.gz patches ntlmaps.install ntlmaps.rc)
md5sums=('7ee0a00d5446f39ebbe5f0f90465986e'
'0ba42ac958b124b8e635c1524b26138e'
'a78770387e22c14a37bfdaee25c6594a'
'602132fda99e27efdd636a946e034d6b')
build() {
PYTHONVER=`python2 -c 'import sys;print(sys.version[0:3])'`
cd $srcdir/$pkgname-$pkgver/
patch -Np1 -i ../patches
install -D -m 600 server.cfg $pkgdir/etc/conf.d/$pkgname
PYDEST_SITE=$pkgdir/usr/lib/python$PYTHONVER/site-packages
mkdir -p $PYDEST_SITE/$pkgname
cp -a lib/* $PYDEST_SITE/$pkgname
install -m 644 __init__.py $PYDEST_SITE/$pkgname/__init__.py
install -D -m 755 main.py $pkgdir/usr/bin/$pkgname
install -D -m 755 ../ntlmaps.rc $pkgdir/etc/rc.d/ntlmaps
echo $pkgname > $PYDEST_SITE/$pkgname.pth
echo "echo $pkgname > $PYDEST_SITE/$pkgname.pth"
Filename: ntlmaps.install
# This is a default template for a post-install scriptlet. You can
# remove any functions you don't need (and this header).
# arg 1: the new package version
pre_install() {
/bin/true
# arg 1: the new package version
post_install() {
echo "Byte compiling python modules..."
python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
# arg 1: the new package version
# arg 2: the old package version
pre_upgrade() {
/bin/true
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
echo "Byte compiling python modules..."
python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
# arg 1: the old package version
pre_remove() {
/bin/true
# arg 1: the old package version
post_remove() {
/bin/true
op=$1
shift
$op $*
Filename: ntlmaps.rc
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
case "$1" in
start)
PID=`pidof -o %PPID /usr/bin/ntlmaps`
stat_busy "Starting ntlmaps"
if [ -z "$PID" ]; then
/usr/bin/ntlmaps > /var/log/ntlmaps.log 2>&1 &
fi
if [ ! -z "$PID" -o $? -gt 0 ]; then
stat_fail
else
add_daemon ntlmaps
stat_done
fi
stop)
PID=`pidof -o %PPID /usr/bin/python2 /usr/bin/ntlmaps`
stat_busy "Stopping ntlmaps"
[ ! -z "$PID" ] && kill $PID &> /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon ntlmaps
stat_done
fi
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
Filename: patches
diff -Naur ntlmaps-0.9.9.0.1/__init__.py ntlmaps-0.9.9.0.1_new//__init__.py
--- ntlmaps-0.9.9.0.1/__init__.py 2005-06-10 13:49:35.000000000 +1000
+++ ntlmaps-0.9.9.0.1_new//__init__.py 2010-10-25 12:49:03.820614080 +1100
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/python2
# This file is Copyright 2004 Darryl A. Dixon <[email protected]>
# and is part of 'NTLM Authorization Proxy Server',
@@ -20,10 +20,10 @@
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-import os, sys
+#import os, sys
-ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
-ntlmaps_libdir = ntlmaps_dir + '/lib'
-sys.path.append(ntlmaps_libdir)
+#ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
+#ntlmaps_libdir = ntlmaps_dir + '/lib'
+#sys.path.append(ntlmaps_libdir)
-del os, sys
+#del os, sys
diff -Naur ntlmaps-0.9.9.0.1/lib/config.py ntlmaps-0.9.9.0.1_new//lib/config.py
--- ntlmaps-0.9.9.0.1/lib/config.py 2005-06-10 13:46:43.000000000 +1000
+++ ntlmaps-0.9.9.0.1_new//lib/config.py 2010-10-25 12:51:35.847799575 +1100
@@ -52,7 +52,7 @@
the config file. Otherwise the function falls back to
'server.cfg' in the current directory. """
- configFileName = configFileDir+'server.cfg'
+ configFileName = configFileDir+'ntlmaps'
optionsList, notUsedArguments = getopt.getopt(argv[1:], 'c:')
diff -Naur ntlmaps-0.9.9.0.1/main.py ntlmaps-0.9.9.0.1_new//main.py
--- ntlmaps-0.9.9.0.1/main.py 2006-01-27 12:35:00.000000000 +1100
+++ ntlmaps-0.9.9.0.1_new//main.py 2010-10-25 12:58:02.445983916 +1100
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python2
# This file is part of 'NTLM Authorization Proxy Server'
# Copyright 2001 Dmitry A. Rozmanov <[email protected]>
@@ -18,17 +18,16 @@
# Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-import __init__
import sys
-import server, config, config_affairs
+from ntlmaps import server, config, config_affairs
# config affairs
# look for default config name in lib/config.py
-conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, __init__.ntlmaps_dir+'/'))
+conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, '/etc/conf.d/'))
conf['GENERAL']['VERSION'] = '0.9.9.0.1'
Save each of the code blocks (cut/paste into an editor) with the filenames given into a directory. Update/check the md5sums in the PKGBUILD for each (dunno how to upload files into a thread so you'll have to check the sums match after pasting/saving and I don't yet have AUR access). Then run makepkg. You should end up with a working ntlmaps for python2.7.
Cheers,
Arkay.
Last edited by arkay (2010-10-26 03:40:20)

Premiere Pro Windows crashing after recent updates

Machine specs: HP Z820 - zeon e5-2690 48gb ram quadro k5000. Since the recent updates & complete wipe of the system & fresh install, Premiere pro CC crashes regularly without any pattern. Using MXF files while editing if that helps-i did read a thread about that - but it was old. This is a new problem. The event viewer information:
Faulting application name: Adobe Premiere Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c
Faulting module name: mc_dec_mp2v.dll_unloaded, version: 0.0.0.0, time stamp: 0x53f72b76
Exception code: 0xc0000005
Fault offset: 0x000007feea381a30
Faulting process id: 0x2168
Faulting application start time: 0x01cfe7cdce8c2c97
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: mc_dec_mp2v.dll
Report Id: ba9aeb2b-53c1-11e4-b3dd-24be05e2e6a2
Audition has also started crashing as well. Info:
Faulting application name: Adobe Audition CC.exe, version: 7.1.0.119, time stamp: 0x5421531b
Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
Exception code: 0xc0000005
Fault offset: 0x000000000003c780
Faulting process id: 0x249c
Faulting application start time: 0x01cfe7ebfe3ea9e0
Faulting application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe Audition CC.exe
Faulting module path: C:\Windows\system32\MSVCR110.dll
Report Id: 4d975a0f-53e3-11e4-b3dd-24be05e2e6a2
Any Ideas?

Re:
Premiere Pro Windows crashing after recent updates
Try finding MSVCR110.dll file on internet and replace it in the path C:\Windows\system32\MSVCR110.dll
hopefully it works...

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

[solved] sudo and yaourt problems after recent updates

After recent updates (past week) yaourt started giving me problems. When using yaourt it prompts me for sudo password but it does not seem to use my sudo configuration.
I get this:
[sudo] password for root:
[sudo] password for root:
Password:
su: Authentication failure
Password:
When entering mine or root's password I just get prompt again. The last password is for su, which when I enter root's works.
It seems sudo is not using /etc/sudoers configuration either, as I have things like insults enabled and it used to work previously.
Any reason for this?
sudo works fine otherwise.
Last edited by wrm (2014-03-29 23:12:26)

Looks like this: https://github.com/archlinuxfr/yaourt/issues/5
And this: https://bbs.archlinux.org/viewtopic.php?id=178776
Last edited by 2ManyDogs (2014-03-24 21:33:40)

Serious connectivity problems after recent updates

Hi
I have serious problem with my WIFI after recent updates from App Store.
I have good router, good internet connection and strong signal - I tested it on Windows on bootcamp and everything work perfectly.
iPhone also works with no problems.
On OS X it's very hard to load a web page, only sometimes it works good, as shown on ping, i have 41% packet loss:
apple ~ $ ping google.com
PING google.com (77.252.2.84): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
64 bytes from 77.252.2.84: icmp_seq=6 ttl=61 time=10.822 ms
64 bytes from 77.252.2.84: icmp_seq=7 ttl=61 time=11.484 ms
64 bytes from 77.252.2.84: icmp_seq=8 ttl=61 time=10.331 ms
64 bytes from 77.252.2.84: icmp_seq=9 ttl=61 time=7.437 ms
Request timeout for icmp_seq 10
Request timeout for icmp_seq 11
Request timeout for icmp_seq 12
Request timeout for icmp_seq 13
64 bytes from 77.252.2.84: icmp_seq=14 ttl=61 time=10.638 ms
64 bytes from 77.252.2.84: icmp_seq=15 ttl=61 time=6.316 ms
Request timeout for icmp_seq 16
64 bytes from 77.252.2.84: icmp_seq=17 ttl=61 time=10.694 ms
64 bytes from 77.252.2.84: icmp_seq=18 ttl=61 time=15.901 ms
64 bytes from 77.252.2.84: icmp_seq=19 ttl=61 time=46.882 ms
64 bytes from 77.252.2.84: icmp_seq=20 ttl=61 time=18.987 ms
64 bytes from 77.252.2.84: icmp_seq=21 ttl=61 time=18.911 ms
64 bytes from 77.252.2.84: icmp_seq=22 ttl=61 time=7.705 ms
64 bytes from 77.252.2.84: icmp_seq=23 ttl=61 time=8.714 ms
64 bytes from 77.252.2.84: icmp_seq=24 ttl=61 time=18.261 ms
64 bytes from 77.252.2.84: icmp_seq=25 ttl=61 time=8.952 ms
Request timeout for icmp_seq 26
64 bytes from 77.252.2.84: icmp_seq=27 ttl=61 time=16.877 ms
64 bytes from 77.252.2.84: icmp_seq=28 ttl=61 time=7.876 ms
^C
--- google.com ping statistics ---
29 packets transmitted, 17 packets received, 41.4% packet loss
round-trip min/avg/max/stddev = 6.316/13.929/46.882/9.219 ms
I'm using no proxy, no additional firewalls, antivirus, vpns (tunnelblick is installed but not used) etc - just simplest possible wifi connection with no changes to default configuration.

I checked my System Log in Console and cannot find anything useful. One msg about the connection:
27.02.2013 07:17:41,096 UserEventAgent[11]: Captive: en1: Not probing 'NETIASPOT-653980' (protected network)

HT3775 Quicktime no longer plays wmv files after recent update

after recent update, quicktime will not open wmv files. had no problem opening them up in the past. reinstalled flip4mac codec and nothing. don't want to use quicklime player 7 b/c need to use fast forward option that will not work with QT7. Any help is appreciated.
thank you,
Damian

I ended up on the phone with an Apple iPhoto expert after scheduling an appointment online (go to Apple support). He spent an hour or so diagnosing my particular problem and was able to fix it. I can once again view all my mov files in iPhoto. Since every computer is different, you might want to try that route. He was able to view my computer screen and direct me to do different things.

My imessage is not Working after recent update

My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

After recent update to Mountain Lion, trash won't empty completely; says "item" inuse

After recent update to Mountain Lion, trash will not empty completely. Always an item left in trash, and I get message that the "item is in use." Right now, using app Trash it! to get rid of that left behind item.

Try rebuilding Trash and see if that sorts it...
Launch Terminal and copy & paste these commands:
Go to /Applications /Utilities/Terminal and launch it.
At the prompt, copy and paste this command
sudo rm -rf ~/.Trash
Press Return.
You will be asked to enter your admin password. It will be invisible.
Enter it and press Return.
Log out and back in or restart.
Let us know.

Does anyone know if apple is working on a solution to fix the wifi drama ( greyed/dimmed out)hundred of ppl have after recent updates?

After recent updates hundred of ppl can not connect to wifi anymore( incl myself)
Really annoying and all kinds of ideas how to fix it did not work out for me
I am out of warranty for 1mth and the apple shop did not even make a bit of afford to help
I am wondering if apple is working on a solution to fix this problem at all? Maybe with the next update?

I am aware of that !I just wonder if anyone has any news about this dramas-I actually hope someone says that apple is try to work on it!
No way they can leave all this ppl out there with this problem without doing anything about it

Internal camera failure after software updates...first skype couldn't......

Hello!
I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
Please help!
Thanks
O

First, reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't help, then take it to an Apple Store for examination.

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

System failure after recent update.

Similar Messages

Maybe you are looking for