SYSTEM_FAILURE_INTERNAL in BPE

Hi,
We are having a new server installation. The problem we are facing is that we are getting an error in every of our scenario involving BPMs. The error msg we are facing is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
SXI _CACHE is fine and having no issue.
Kindly help me in resolving the issue.
Regards
Pravesh

Hi Pravesh,
Did you do the Business Proccess Engine customizing?
Go to this link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/37/5b0f41e9a0ef23e10000000a155106/content.htm
Regards,
Carlos

Similar Messages

"BPE_ADAPTER" SYSTEM_FAILURE_INTERNAL

Hi Experts,
I saw the previous blogs on the "BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL failures but i didn't get the solution.
My Scenario is SOAP to RFC to FILE with Asyn/Sync Bridge using BPM(Aync Receive, Sync Send,Send ), while I am testing messages are failing with the below error.
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="*BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL*</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
I activated the BPM, the return code is '0'. but there is no business process workflow in SXMB_MONI_BPE and SXMB_MONI.
This is the first time we are developing the BPM interfaces for the project, what are the configuration has to be done, please help on this.
Thanks in Advance,
snrvakiti.

Hi Michal,
The scenario in that blog is FILE to RFC to FILE, but my requirement is SOAP to RFC to FILE, and today i tried with simple BPM scenario,it is also failing with the same error.
In trace i notice that its unable to fine the abstract interface i.e. its not entering the BPM.
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
Actually previously we are using the SOAP to RFC synchronous Scenario, but its not supporting the business with 1000 line items of soap request.soap URL connection is closing by the time the request from the R3 system. so now we are looking to send the response in asingle file to the user.
can you plz help me with BPE Adapter configuration.
Thanks in advance,
snrvakiti

Correlation scenario --- SYSTEM_FAILURE_INTERNAL

Hi
In my scenario
Correlation Runtime Behavior of BPM.
I have created BPM while checking(F7) says that
1. No Semantic errors found
2. Activated correlation Employee is not used in any subsequent step (warning message)
In sxmb_moni I am getting the following error message
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
what is meant by SYSTEM_FAILURE_INTERNAL and An internal error has occurred. How to rectify these errors
thanks
manian

Hi Manian,
We can't say what exactly the error is.The error may because, when IE gives a message to BPE --there might be a conversion problem or BPE is not able to take this message.Please contact your Basis team to rectify this issue immed
Thanks
Prabhakar

CcBPM - BPE_ADAPTER : SYSTEM_FAILURE_INTERNAL

Hi gurus,
I am facing below errorn in ccBPM
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I checke din sxi_cache and it shows return code - 0 , what could be the reason!!!

Try this :
The BPE Adapter error may be also because of Inactive version of BPM runtime
So as suggested check the SXI_CACHE again and make sure that Return value is 0.
Also do this: Go to Transaction SWWL and delete all the errored entries which belongs to your integration scenario
Then you can re-import the Integration Process into Directory so that it will be re-active.
Solution:
Step maintain prefix numbers allows you assign number ranges to your custom workflows on the ABAP side (BPMs)
This is a post install step - pretty easy... You can ask your basis person, or do it yourself --> click on the execute icon and enter a number range e.g. 99* will work.
As for your BPM - first step is check if the BPM was succesfully replicated to the ABAP side. SXI_CACHE, select the BPM and ensure RC is '0'.
If all this works, then thats a good start.
After that, check your queues, check SWI1 and check SWPR - for the possible errors with that BPM...
Of course check RWB for the initial message that should have kickstarted this scenario and look at the status.
check this links who has same error,their problem got rectified:
BPE Issue
BPM activation problem

Error while opening BPE

Hi,
I installed Sun Identity Manager 7.1 version. Everything went well. After setting WSHOME and JAVA_HOME variables I tried to open BPE by typing lh config in %WSHOME%/bin directory. I am getting the following error:
Files\Apache was unexpected at this time.*
Any help will be greatly appreciated.
Thanks

Problem solved. I tried to open BPE after restarting tomcat. It works fine now. I am able to open BPE and repository objects as well. But still I dnt know why this error has occured :)
Thanks

Error from BPE Adapter using in Async Sync scenario

Hi,
I'm trying to use a Asyn Sync pattern with BPM:
1)File adapter get a file from AS400, split it several XML messages and send to XI(Async)
2)XI get each message and forward to BPM using XI adapter
3)BPM has to send the message to R/3 via BAPI (Sync)
4)R/3 reply the result message to BPM(Sync)
5)BPM has to send the result message to e-mail system if an error had occurred in BAPI call (Async)
When I send directly from File adapter to R/3 works like a charm, but when I want use the BPM, a soap header error says to me, that cannot identify a data type that Im using in the message sent by File adapter.
The error that I'm getting is BPE Adapter UNKNOWN_MESSAGE in soap header.
Regards,
Eduardo

I got the same problem after installing new patches.
This is what I had to do:
Go to SXI_CACHE
- Choose Business Processes
- select your Buisness Process
If your buisness process has Return Code 99
- Click "Repeate Activate" button
- On the next screen, click Activate again.
This worked for me. Good Luck!

BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
 You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
 SXMB_MONI_BPE->Diagnosis Processes with Errors
 SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
 Hope this helps you....
 Regards,
 Encinas.

BPM fails due to error "Permanenter Fehler in der BPE Eingangsverarbeitung"

hi all,
i searched the forum and haven't got a proper solution for this.
My scenario is that i am getting a message via a file adapter and sending it to BPM. In my BPM i am receiving this message via a asyc receive step and then
calling a SAP RFC via a synchronous send step. But when i see the result in transaction SXMB_MONI i see that my BPM could not be processed due to an error message in the queue "Permanenter Fehler in der BPE Eingangsverarbeitung".
Any help in this regard would be highly appreciated.
thanks and regards,
Abhishek

Hi Abhishek,
Not sure if this would help you ...but try this..
Did you check the return code of the Integration Process in Cache. Is it 0.
Secondly try to run a simple file2file scenario with using BPM and check if the scenario works.
My guess is that you are getting the error because some configuration has not been done. Check if the BPE is not stopped.Use t-code SWF_XI_ADM_BPE
Do post if you have additional queries...
Regards,
Sumit
Regards,
Sumit

Error in BPE Adapter Processing

Hi Experts,
I have a scenario in which data flow from JDBC => BPE => ECC.
while sending data from JDBC to BPE adapter, faced below error in SXMB_MONI.
"Error in BPE Adapter Processing"
In SXMB_MONI, Overall status displays as "Manual Restart Possible" error as attached below.
I completed the all configuration related to SWF_XI_CUSTOMIZING and SXI_CACHE.
also my Integration process has return code 0 in SXI_CACHE.
I also want to know what are the software's required in PI related to BPM for both JAVA and ABAP Stack. i have a SAP PI System with version 7.31.
Please guide me to solve this error and also inform me if any configuration related to BPE adapter is missing or not.

hi dear,
Tried the reports which are mentioned in the notes and followed the link
but we couldn't resolve the same. can u please help us to move ahead to resolve our issue.
any corrections / suggestion regarding the same.
Permanent error in BPE inbound processing

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

How to resolve "BPE_ADAPTER SYSTEM_FAILURE_INTERNAL" error in moni.

I am getting 3 files from legacy systemi am merging 3 files using BPM sending APO system using proxy., When i am testing in dev it was worked fine after transporting it QA i an getting below error and in sxi_cache its shoing integration process return code 99.after activating at sxi_cache its showing status 0 but still showing below error in SXMB_MONI.please help me..
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Seshagiri.

Its a bit generic error. So many things could be checked:
1. In SWWL, delete the earlier running instances before running the new scenario.
2. Reimport the IP in ID again. Save, activate and try running your scenario again.
3. In tcode sxmb_adm_bpe - Automatic BPM Customizing, check for the error.
4. Check if SWF_XI_CUSTOMIZING appears green.
Regards,
Prateek Raj Srivastava

Newbie: Where do you find the Resource Adapter XML in BPE

Hi,
I am trying to follow the documentation for adding a "Delete After Action" to a resource. Step 6 mentions editing the XML for the resource adapter. I know how to run the BPE, but I cannot find what object to open in the repository. How do I perform this step?
6. Edit the XML for the NT resource and add information to the �delete after action� schema mapping. Here is an example of a complete schema mapping for this resource with the new additions. (You will be adding the views-related information.)
<AccountAttributeType id='12' name='delete after action' syntax='string' mapName='IGNORE_ATTR' mapType='string'>
 <Views>
 <String>Delete</String>
 </Views>
</AccountAttributeType>
Thx,
Jim

Are there any known issues with the instructions
here:
http://docs.sun.com/source/819-4520/Adding_Actions_to_
Resources.htmlI have the same problems with IDM 7.0. Followed the instructions and many tips in this forum but nothing worked. My delete-method is not executed.
Does anyone know how to fix this?

BPE adapter unknown message

Hi
I get an error in MONI" BPE adapter unknown message " .scenario is working fine in development system .And just now imported the configurations in quality system .
SXI_CACHE RETURN CODE IS 0
DELETED AND REIMPORTED THE PROCESS AGAIN
i have check transaction enabled for all teh steps in BPM in dev sysem ..Would it be a possible reason
and does it have any linkage to authorizations .. since I retransferred the change list to my name from some one else and activated but with no errros
Kindly advise on to resolve this error
Thanks
Anusha

i have check transaction enabled for all teh steps in BPM in dev sysem
Any specific requirement to do this?....if no then remove the checkbox entry....just the Start Process checkbox should be enabled for the first step (receive step)
Regards,
Abhishek.

TimeOut Exceeded in Inbound BPE queue

Hi All,
We have been facing an issue in our PI production box which stops the whole BPE inbound queue for one particular BPM.
We have a simple BPM pattern to spilitt messages
Receive Message>Transformation which includes Java mapping>Send step Inside Block with multiline elemnet ( To send n number of messages to target application using HTTP adapter).
We received 5 MB file for this interface and it got failed in BPE inbound queue with error message "Time Limt Exceeded". The IP is using One queue and Buffering possible options. Ideally what happens is message is getting blocked in the BPE inbound queue which stops other messages.
There is always active receive step is available to receive messages from Q.
The corresponding Integration process was not able to pick the message which 5-7MB file size. The BPM is running fine without any issue when file size is smaller.
I have gone through the following documents already.
How To Configure Inbound Processing in ccBPM Part I: DeliveryMode
How to Configure Inbound Processing in ccBPM Part II Queue Assignment
How ToConfigure ccBPM Runtime Part III: Transactional Behavior of an Integration Process.
Could anyone suggest me if i hcan change any default settings which mentioned in above documents? Rightnow i am using "One Queue" and "Buffering possible" options.
Where exactly time limt settings are maintained for BPE inbound queue?
Edited by: Rajesh on Oct 27, 2009 11:47 PM

First thing that I would do is to remove the queue specification in the BPM. This way, it will not block any other messages of the BPM. Then check for any Runtime paramters in SXMB_ADM for increasing the wait time.
VJ

Permanent error in BPE inbound processing

Hi all,
We have recently migrated are XI scenarios to a new server.
In one of the file to rfc scenario whenver a file is processed i get the error in smq2: Permanent error in BPE inbound processing.
The chances of BPM and mapping error are less as the BPM is working live in another server.
What could be the other problems.
REgards
Edited by: Vinithra Iyangar on Feb 26, 2009 10:36 AM

Dear Vinithra,
Its highly improbable for this error to occur because of transports going wrong. There is one more case which i am sure is the cause why you are getting this error.
"This behavior is when we place the files in the respective folders both the files are picked up by the file adapter. Process instance is generated for BPM. First receive step is encountered and the file is received by it. But due to the wait step the second receive step is not open and hence the second file cannot be delivered to it. Unlike the first case, in this case as the buffering is deactivated the file is not buffered and hence the inbound processing of BPM fails for the second receive step."
Please check if something like this is happening.
Refer : /people/milan.thaker/blog/2008/07/04/delivery-modes-in-bpm
Rgds
joel

SYSTEM_FAILURE_INTERNAL in BPE

Similar Messages

Maybe you are looking for