Correlation scenario --- SYSTEM_FAILURE_INTERNAL

Hi
In my scenario
Correlation Runtime Behavior of BPM.
I have created BPM while checking(F7) says that
1. No Semantic errors found
2. Activated correlation Employee is not used in any subsequent step (warning message)
In sxmb_moni I am getting the following error message
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
what is meant by SYSTEM_FAILURE_INTERNAL and An internal error has occurred. How to rectify these errors
thanks
manian

Hi Manian,
We can't say what exactly the error is.The error may because, when IE gives a message to BPE --there might be a conversion problem or BPE is not able to take this message.Please contact your Basis team to rectify this issue immed
Thanks
Prabhakar

Similar Messages

Content Based Correlation in Oracle 11g

Dear Veterans!!!
I am working on the following use-case.
An order processor accepts order(Mode-Buy/Sell, Price, Quantity) on webservice from various customers, and presents them to DecisionService, after adding the order Id to it. The decision service would check if the price*quantity > 1000, if so the response is sent as (Order ID, OrderStatus="Fail") else, sends (Order ID, OrderStatus="Success").
What I want to do?
Now I need to create Order Processor using single JMS Adapter with Interaction type "Asynchronous Request/Reply" using content based.
What I have been able to do?
I have been able to do content-based Correlation between Decision Service BPEL and Order Processor BPEL, where Order Processor has two JMS Adapters, One Producer which enqueues the order for Decision Service, setting the orderId as correlation. The another JMS Adapter is set as Consumer and recieve activity is registered with it and picks up the response after correlating the message.
Also I have been able to do the "native correlation" scenario, using Decision Service as mediation module.
What is the problem?
1. I need to have the decision service as BPEL, and be able to do the native correlation, which I wonder how to do, because the Jdeveloper 11g has removed support for Adapter Header variables.
2. I need to use decision service as BPEL and be able to do the content-based correlation, using a single Asyncronous Request/Reply JMS Adapter instead of two (Producer and consumer).
Any Pointers shall be useful.
Many Thanks,
Regards,
SwapSawe.
I am aware of how to set the correlation
http://swapnil-soa.blogspot.com/2008/01/correlation-this-post-would-effort-to.html
And how to do it in Oracle 11g
http://biemond.blogspot.com/2009/10/jms-request-reply-interaction-pattern.html
Edited by: SwapSawe on Nov 30, 2009 11:01 PM

Dear Friends,
If I was not able to make my point clear, I would explain it again. I am posting message from one BPEL process to an Asynchronous Request/Reply JMS Adapter.
A consumer JMS Adapter, would read the message from Q and would initiate another BPEL process, which would perform some business logic to generate a response and post it to reply queue via JMS Producer.
Now the reply posted, is picked up by the Async Request/Reply, but the receive activity is unable to correlate the message.
I was able to do this scenario using native correlation, i.e. JMS Message Id mapped to JMS Correlation Id, through mediation module. But I am looking forward to do this using content based correlation.
Regards,
SwapSawe

BPM Correlation problem

Hi All,
I did BPM correlation scenario. According to this scenario I have to send 2 messages, if I send two messages from the sender side it is working fine. If I send one message from sender side it is waiting until second message reach. Here my problem is if the second message may not send, I want to kill the message waiting process at a specified time. Please help me how to do this process.
Thanks ,
Kumar.

Hi,
There is a 'Deadline branch' dedicated for this purpose. In a block you can introduce a deadline branch.
Go thro the link for more details:
http://help.sap.com/saphelp_nw04/helpdata/en/c5/582541019fa52fe10000000a155106/content.htm
Regards,
P.Venkat

Enable Biztalk Failed Message Routing in Orchestration

In Biztalk Receive Port or Send Port, we can enable failed message routing such that error message will be routed to the message box for further processing and I can subscribe to those error reports and consume them.
Can I do the same in an orchestration? So for example, I have a correlation set, where my orchestration is going to wait for 2 messages before aggregating them and publishing a message to a send port.
So my receive shapes are in a scope shape and the scope shape has a timeout. So if the timeout elapses before the orchestration is completed then an exception will occur and the message will suspend.
What I'd like to do is have it not suspend, generate an error report which I can subscribe to and perform other logic, such as inform someone. I'd also like to include details about the message, or possibly the entire message that was received, which
appears difficult because the scope's exception block is not in scope of the message that was received.
I'd think that will correlation scenarios this would be a common problem. Any suggestions?

Hi Jeremy,
You have to use Exception Handling in Orchestration, I would ask you to go through following articles to understand how to work with exceptions in Orchestration:
A developers guide to handling exceptions in BizTalk Server
Using Transactions and Handling Exceptions
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

Correlation issue in JMS adapter - SYNC/ASYNC scenario without BPM

Hi,
I am working on a SYNC/ASYNC scenario with JMS adapter without using BPM. My scenario is SOAP<>PI>JMS. I configured the interface as below:
1. SOAP Sender channel
2. JMS Receiver Channel writing to Queue A.
     Module used:      a. RequestOneWayBean
               b. WaitResponseBean
     Correlation Settings:
               a. Set JMS Correlation ID to "XI Message ID"
               b. Store JMS CorrelationID of request (Checked)
               c. Set JMS Property to "JMS Correlation Id"
               d. Value = "XI MEssage ID"
3. JMS Sender channel reading from queue B ( I am exporting the message from queue A and importing into queue B)
     Module used:      a. NotifyResponseBean
     Correlation Settings:
               a. Set XI MEssage Id to "GUID"
               b. Set XI Conversation ID to "Stored JMS COrrelationID of Request"
I can see the cid in the message from queue A. But I observed thhat the header format of the message in Queue A is "MQSTR".
ISSUE:
1. While writing the message to queue A, below adapter log details(part b) concerned me:
     a. Message '8747a7c2-2b06-11df-8055-005056a70ed6' successfully processed by channel
     b. Could not create acknowledgements for message '8747a7c2-2b06-11df-8055-005056a70ed6'
I am not sure why I am receiving the message that " could not create acknowledgements"
2. While reading the message from the sender channel,I consistently get the error message as below:
     a. XI message ID corresponding to JMS message with ID 'ID:414d51205341504449442e514d202020c67b954b20005602'
          will be created as a new GUID with value '21bca916-424f-41f6-3347-c71090392b58'
     b. Error while processing message '21bca916-424f-41f6-3347-c71090392b58'; detailed error description:
          com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
          found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
Below are the blogs which I have already gone through:
1. JMS Synchronous Scenario without BPM - Correlation Settings and Transactional JMS Session
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
2. Note: 1086303
3. Sync / Async Bridge without BPM
In the note, they mentioned something about header being "MQRFH2". BUt in our case, the header is "MSSTR". Not sure whether it makes any difference.
Please help.
Edited by: GP on Mar 9, 2010 4:24 AM

Hi,
detailed error description:
com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
This error would generally arose when there are multiple messages, got stuck in the outbound queue. Try to stop both the sender and receiver JMS comunication channels and clear both the inbound and outbound queues.
Once all the messages in the queue are cleraed, try posting the message again.
Regards,
Swetha.

Correlation exception reflecting on Human Task-Invalid scenario

Hi
We are using 11.1.1.6.0 version of BPM-SOA.I have defined correlation on orderID in the start message of the process containing a human task.
I created the an instance with orderID 123 and it rests at the human task.Again i am calling the same bpm process with orderId 123, the instance is getting created and coming on the workspace too which is an invalid scenario.BPM should not allow bpm instance to be created with the same PURN number.On checking the EM, the same instance is faulted but it is reflecting on the workspace for the user to act upon.
Please help it is breaking my code.
Regards...

Any help...

Advise on complex scenario. Correlation based on file name

I need to process all *.xml files in a folder, but I should only process a specific .xml file if I find another one .ctl with the same name.
That is. I may have 3 .xml files in a folder (a.xml, b.xml and c.xml), but as I have only one .ctl in the same folder (b.ctl), I should only process b.xml and do something with it.
I've been struggling to find out a possible way to solve this scenario. I think it's only possible using NFS with the option of "additional files", but I have to use FTP, and it doesn't have that option.
Of course I could implement it using a java module adapter in the sender comm channel for *.ctl files which establishes the ftp connection for the other file (.xml), but I'm trying to avoid this.
Thanks!

Hi,
Hopefully this blog will solve your problem..(you have to set your parameter as per your need)
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
Sorry Jorge, I misunderstood your question.. above blog will not help in your case..
Update:-
How about writing a script which will scan the source folder and check if there is a file with .ctl extension then it will move the same name file with extension .xml into some other folder and then you can configure your adapter with this second directory path to simply pick the files.
Edited by: Sarvesh Singh on Feb 12, 2010 2:07 AM

Issue with BPEL Correlation on Invoke 11g

The scenario is like...
One initial receive -> Invoke to a Web Service -> Receive from JMS Q -> End of the process.
I have applied BPEL Correlation on Invoke by creating property alias with Output Message Type.Pattern I have also used.
Now, when I run the composite, the instance is in error but no error message.
On the other hand, if I use the Input message type for correlation property alias, the BPEL process proceeds. But my requirement is to do the correlation on output variable of invoke which needs to be checked against receive input variable.
Can any one suggest some resolution here?
Thanks.

Hi,
Here the option what I can think of is that use some unique element that you passing in first invoke for correlation and customize the external service to ask them to have your passed value as part of their queue values, That way you can correlate the messages and once correlated based on unique value you match up the tokens.
Suggesting this work around as, correlation will always need token, which is passed as an input to the first Invoke. so defining correlation based on output token is not possible.
If you find something please do share.
-Umesh

Issue with Correlation in 11g related to Number of Instances

Hi ,
I am working on the correlation sample application and i observed like correlation is working fine but it seems two instances are creating in EM console,
As per my knowledge when we are working with correlation we should only one instance,
Can anyone tell me why i am getting two instances instead of one ?
Is it a bug in SOA 11g version ?
I had executed many examples and all of them are giving two instances..... one of the site i downloaded and tested sample is available in below link,
http://blog.andrade.inf.br/2010/03/oracle-bpel-11g-correlation-sets.html
Can anyone help me in this,
Regards,
vnraju
[email protected]

In case you have multiple instances running, whereas any instance has an unique value started as correlation, when the engine receives the messages for the intermediate receive operation it will be routed without problems to the right instance. In this case, it is not a problem if the engine creates a new composite instance for the intermediate messages.
We have this situation in Production without any problem.
Anyway should be simple to simulate the same situation in your development environment to make sure it works well in your scenario.
Regards
Luis Fernando Heckler

Issue in Sync-Async bridge(RFC to File) scenario

Hi All,
My scenario id RFC to file synchronous scenario.Following the below link, I configured everything and its working fine. I am working on SAP PI 7.31 Dual Stack.
http://scn.sap.com/blogs/henrique/2007/08/02/syncasync-scenarios-without-bpm
As mentioned in the above link, I created the file with Message Id as file name and correlating with the message id(Using WaitResponse and Notify beans).Its working fine. But I don't want the file name to be as Message Id. Then in that case, please suggest me how can I correlate the request and response messages.What are the possible ways of doing it.
Thanks,
Madhurima

there is not a best way, just what you need to archive, take the file name as you mentioned is not the best practice, so you can use another parameter provided by SAP.
To evaluate the following attributes in the PI message header, set the corresponding indicators:
○ File Name (technical name: FileName)
○ Directory (technical name: Directory)
○ File Type (technical name: FileType)
○ File Encoding (technical name: FileEncoding)
do any of them are good for you?
Rdgs

File to SOAP Scenario Using BPM

Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.

Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan

Correlation or container step in BPM

we had scenario where 3 files will come in batch in sequence
and after validation check in message mapping they had to transfered
to same RFC in that sequence.
File -> Xi-> RFC
Files will come in one shot/batch
batch by batch..
Now my concern is..
With BPM we want to correlate 3 files and then post it to RFC.
3 files will have some comman field/Filename extension...
why we want correlate is that:
- XI should not process any incomplete batch ( like 1-2 files have come)
- XI should differentiate between files of Next coming batch..correlation will help or only container variable ..
Regards
Ashutosh

Hi,
Why do u want to go for BPM is there any specific reason.
Did the functionality of BPM work only for batch files.
If it work for single file then make necessary changes in file adapter mention below.
3 files will come in batch in sequence
We can understand that they will come in batch (group) within that batch they are in sequence.
Correct me if I am wrong.
If so make necessary changes in sender file adapter.
Mention file name as .txt or .xml (depending your format)
Processing mode as Delete.
Processing sequence By Date.
Hope this changes is necessary with out using BPM.
If using BPM is mandatory
With BPM we want to correlate 3 files and then post it to RFC.
3 files will have some comman field/Filename extension...
if u want to use correlation then three files should have common Field.
reward points if helpful.
regards,
pradeep A.

N:1 file merging scenario in bpm

Hi friends,
Can anybody send me link of blog for file merging scenario in BPM. i hav two files and i hav to merge it into one single file. I am new to XI, plz help me.
Thanks in advance,
Shweta

Hi,
Check this blogs...
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Merging using corelation -
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
Example using correlation:
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Please reward points if it helps
Thanks
Vikranth

How to build N: 1 Scenario on SAP PO - NWBPM

I am going to use PO 7.31 Single Stack.
I have to build a N:1 scenario on Eclipse based NW-BPM editor.
Experts : Below is my requirement.
WebService Source 1 [ Address Information ]->
-> NW-BPM [ Mapping to combine data from Source 1 and Source 2 ] -> ECC Target
WebService Source 2 [ Personal INformation ]->
Source 1 and Source 2 has a common correlation ID [ Employee Number ].
NW-BPM Should wait until data from source 1 and 2 will arrive.
Is it possible in PO 7.31 Single stack NW-BPM ? If Yes then how? Please point me to right examples.

I hope you are familiar with ccBPM scenario in dual stack. If so, just apply the same logic here in NW BPM. If you use transformation step in ccBPM to merge multiple messages into one message based on correlation then use the same logic here in NW BPM by creating an automated activity. In simple terms, your transformation step in ccBPM will become an another mapping step as an automated activity in NW BPM.
I'm assuming your scenario in Dual stack as, standard BpmPatternCollectMessage. If this is the case, then here are the steps.
Start -->Uncontrolled Merge -->Intermediate event -->mapping-->Uncontrolled Merge -->Automated Activity --> End
Regards
Sridhar

Problem with correlation

Hi ,
I am trying a N : 1 scenario using BPM , I have used correlation for this ,
This is the procedure i have used
1 . Block :
            Properties of block : Block start --> New Transaction
                                          Block End --> New Transaction
                                          Local Correlation ---> CORRELATION
           Two receive steps inside the block .
           a. Receivestep1
                   Properties of Receivestep : Start Process check box ticked.
                   Activate Correlation          : CORRELATION
                   CORRELATION
                    EMPNO
          b. Receivestep2
                 Properties of Receivestep :
                    Use Correlation : I am facing Problem Here
I am unable to use the correlation , when ever i select it n save the Use Correlation text box appear with ? symbol , due to which i cannot activate the integration process , How can i solve it..
Regards,
Syed

Hi Syed,
            Once u have activated your integration process than you want to make any changes particularly on correlation editor you will observe this kind of behaviour.
Solution:
Step1: Better to copy integration process with some temp say <int.prcess_name>_temp then make changes in newly created one and activate newly created integration process.
Step2: Delete the orginal int.process and activate change list.
Step3: Copy the newly created int.process with name say <int.proces_name>_temp to orginal name
i.e <int.process_name> then delete the <int.proces_name>_temp and activate the change list.
This is work around solution for your problem.
Regards,
Rao.Mallikarjuna

Correlation scenario --- SYSTEM_FAILURE_INTERNAL

Similar Messages

Maybe you are looking for