System hard drive configuration help

Hello everyone,
I am currently upgrading my hard drives to get the best performance possible for pc.  I have a couple questions regarding what size hard drives I should get for certain jobs.
1.  What size hard drive do you recommend for a cache disk?  120gb SSD good enough?
2. What size hard drive do you recommend for an export drive? Should it be an SSD or HDD? Once I export from premiere/after effects, I will move the file into my media drive anyways so does the hard drive have to be large?
So here is my setup as of right now.  It's terrible. Haha
    -512gb ssd for os & programs
    -1TB hdd for everything.
As I have read on multiple forums/google, its best to have a hard drive for specific jobs.  I want to make sure I have the concept down.
This is the setup I would like to have......
    -512gb ssd for os & programs
    -2 TB hdd raid 0 configuration
    -120gb ssd cache
    -60gb ssd export drive
Is this a good/correct setup or should I change anything? I do not consider myself an expert on this subject at all so any help/opinions are appreciated!
My PC specs are:
Intel Core i7 5930K Hex-Core 3.5GHz
16GB Corsair Dominator Platinum 2666Mhz (4x4GB)
Single EVGA 4GB NVIDIA GTX 970
ASUS X99 Deluxe Motherboard
Thanks!!
-Matt

So you currently are aiming for
-512gb ssd for os & programs
-2 TB hdd raid 0 configuration
-120gb ssd cache
-60gb ssd export drive
Do you need 512 for OS / Applications? Seems a waste of a nice piece of hardware. If you can look at switching that for a smaller SSD and then you can use that as a export / target drive. If you are exporting raw or similar then 60GB's will be only a couple of minutes.
As for your raid 0 configuration, remember more = faster, the more drives in the array the faster the times are. With disk prices these I would consider 3 X 2 or 3TB drives. Not sure how many SATA ports you have. If you have more, add more drives.
**Edit - I use the same SSD target or export drive as my cache drive and have not seen any delays at any given time.

Similar Messages

  • Hard drive configuration help needed.

    Just got the mac today and I'm starting the upgrades. This is how it will look. 3 1TB seagate drives. I am going to clone the factory drive to one. Install Vista through bootcamp on another.
    This is what The Hatter had mentioned in another post that I started. "Vista is easy to install, doesn't need any help really, doesn't run in, under, or through BootCamp. Just format a drive as Master Boot Record, setup one or more FAT partitions (you will need to delete and create NTFS when it gets to the install screen in Vista). Then once running, you install some Apple hardware services and support to allow switching, synching time, and such. And install the latest Nvidia Vista drivers."
    I can probably figure out how to get the process started, but I have no clue as to the specifics of the last sentence that starts "Then once running.....". If you see this Hatter, could you please give me the specifics? The third will be for storage.
    I noticed that there are no jumpers present on the Western Digital that came with it. So is removing the limiting jumper's from the Segate's the only settings I need to worry about?
    Lastly. When I install these drives, will Mac do the format or is there something I need to do first?
    Thanks in advance.

    You'll need to consult Seagate's configuration information for your drive model. You can locate it at Seagate's web site.
    Partitioning and formatting is done using Disk Utility in the Utilities folder. New drives that did not come installed from Apple should be prepped properly as follows:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    The exception would be if you plan to set up one entire drive for Vista. In that case when you partition the drive select MBR partition scheme rather than GUID and format the drive MSDOS. You need not use the Write Zeros option. When you install Vista it will reformat the drive NTFS.
    If you intend to use part of one drive for Vista and another partition for the Mac, then prep the drive for the Mac as outlined above. Then use Boot Camp to create the Windows partition on the drive. Boot Camp will install the MBR on the Windows partition which you cannot do from Disk Utility.

  • Two hard drive configuration help Windows 7 + Mac

    Hi everyone,
    So I'm planning on upgrading my early 2011 Macbook Pro 15 by adding an SSD at the expense of the optical drive. Basically, what I would like to do is to replace the current HDD with the new SSD and replace the optical drive with the HDD mounted onto an optical caddy.
    In summary:
    SSD (main HDD bay) - Mac OS Mountain Lion and Windows 7 + a few Mac/Windows applications
    HDD (optical bay) - Mac OS and Windows data files and programs
    This is possible? If so, how would I go about doing this?
    Cheers!

    Hi, I have a 13" mac pro (mid 2012) with a 500GB Apple hard drive.  I removed the optical drive and installed a drive adapter with a new SSD (500GB).  So to confirm, I have: SSD (optical bay), and HD (main bay).  I also wanted Windows via bootcamp on my machine and of course I wanted both it and my Mac OS (Mavericks) on the new SSD (to benefit from the faster drive).  Installation of Mavericks on the SSD was no problem, but Bootcamp/Windows installation constantly stalls at a black screen with flashing white cursor in the top left corner.
    The breakthrough came when I tried removing the original Apple hard drive from the main bay.  With only the SSD (running Mavericks) present in the opti-bay I was able to complete the installation of Windows/Bootcamp on my SSD.  Great right?
    Yes and no.  It's great to have both OSs running on a snappy SSD, but when I re-install the Apple HD in the main bay Windows once again stalls at the black screen with the flashing white cursor in the top left corner.
    I thought the problem might be that the computer was getting confused by having two disks each with two OSs (even though holding the Option key from start up brought me to the Boot menu where I was able to choose my OS of choice).  So I wiped the Apple HD clean, essentially making it a storage hard drive, no OSs on it.  Still wouldn't start up Windows (stalling at the black screen with flashing white cursor).  BTW Mavericks will boot from the boot menu, just not Windows.  So james1607 it's definitely possible to install Mac OS and Windows on the same SSD but so far my experience says the 2nd drive just confuses the computer re: starting up Windows.
    Removing the Apple HD from the main bay solves the issue, but that's very unsatisfying.  I want to use my Apple HD as extra storage in my computer not have it gather dust on my bookshelf.
    Obviously the Mac Pro is getting confused by having two hard drives present (when trying to start Windows).  But why?  Anyone out there with similar problem?  Solutions?  Thanks in advance!

  • Hard Drive configuration for speed

    I've got a question regarding the best hard drive configuration for my mac pro. I'm looking to increase the boot speed, application load speed and particularly the speed with which hard drive intensive photoshop processes complete. Right now I'm just using some normal SATA II drives. I'd appreciate it if you could give me some feedback on the various options I am currently considering.
    -2x 64GB SSD in a RAID 0 for OS X and applications with some large SATA drives for storage
    -4x 300GB VelociRaptor 10k RPM SATA HDD in a RAID 0
    -2x 147GB SAS 15k RPM HDD in RAID 0 with some large SATA drives for storage
    I am particularly in the dark about the controllers I'd use for each solution. Clearly, I would absolutely require a PCIe card for the SAS drives, but would there be a marked advantage to using a hardware RAID card for the SATA drives over the software RAID in OS X? Also, how easy is it to get the mac pro to boot off drives connected to a controller card rather than the standard setup? And lastly, if there is good reason to use a card, are there any in particular that you would recommend?
    Thanks a lot!

    2. No. Do not make two partitions unless you do not plan to use Boot Camp Assistant to install Windows on that partition. If you plan to create a Boot Camp partition then you must partition the drive as one Mac OS X volume. Boot Camp Assistant will then create the Windows volume.
    3. This drive must be repartitioned and reformatted as follows:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the drop down menu to two. Use the graphic resizer to set the desired sizes for each volume as you want. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the first volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Select the second volume you created and repeat Steps 4-6.
    4. Now here I don't know what you think is your best option. You can buy any two hard drives you want. The ones I identified were only an example of what you could purchase for under $300. There are others, slightly more expensive, that would work, and you would still be under your $300 budget. The Samsung drives are good drives and reasonably priced, but they are just one of several alternatives. You should do some checking on your own before making your decision. I'm just giving some guidance, not trying to tell you what you should do. I've provided three sites where you can read reviews and benchmarks before you decide. You need to "own" your decision.
    As for how you configure these two drives that's a secondary issue. I would recommend using them for backup. Two possible arrangements are a Mirrored or a Striped RAID array. A mirrored RAID array would create one volume that has a 1 TB capacity. Everything saved to that volume is essentially saved twice - once on one drive then a copy is mirrored to the other drive. This is not what you described in your Item 4. That's not how it works. Anything saved to the mirrored RAID array is saved the way I described it just above. It makes no difference where the files come from.
    Now you can use the mirrored RAID array as a Time Machine backup drive if you want, but then you should not use it for other data storage. You would need the entire capacity as backup for both of the 500 GB drives you currently have. A mirrored RAID provides some data redundancy by having a copy of everything one each drive. Thus, if one drive fails the other drive still functions and your data backup is intact. Mirrored RAIDs are generally no faster than an individual drive that makes up the array.
    The second suggestion was to make a Striped RAID array. This type of array produces one volume that is twice the size of the the two drives that make up the array. Thus, you would have a single volume that is 2 TBs in size. You can use this volume for your Time Machine backups also. Striped RAIDs do not provide any data redundancy. If one drive fails all the data stored on the RAID will be lost. However, Striped RAIDs are nearly twice as fast as either drive that makes up the array. This would give you very fast storage and backup.
    You could also just leave the two drives to operate independently. Use on for Time Machine backups, use the other for more storage space.
    Other possibilities abound. It's pretty much up to you to decide what will fit best into your needs today and in the future. Don't feel obliged to do what one person tells you. Five different users on the Discussions will give five different opinions.
    I suggest you educate yourself a bit on backup and restore by reading the FAQ about backup and restore at The XLab FAQs.
    Following is more information on RAIDs:
    RAID Basics
    For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
    RAID Tutorial;
    RAID Array and Server: Hardware and Service Comparison>.
    Hardware or Software RAID?
    RAID Hardware Vs RAID Software - What is your best option?
    RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
    RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
    Pros and cons
    Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
    For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?
    OS X has software for creating RAIDs by using Disk Utility. Open Disk Utility and select DU Help from the Help menu. Search for "raid" without quotes. You will find information on how to set up mirrored and striped RAIDs using Disk Utility.

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • How do I overcome error 150:30 with a replacement system hard drive on a Mac Pro?

    I have replaced my system hard disk drive on a Mac Pro and used Mac 'Restore' to restore the complete system from a Time Machine backup. Everything else works correctly, except my current Adobe products (InDesign CS4 and Photoshop CS4) both give a licensing error code 150:30 and each suggest contacting Adobe technical support.
    Can you help?
    Blair Cramond 

    Thanks for your reply. Is it necessary to uninstal the existing CS4
    products before re-installing?
    Ned Murphy <mailto:[email protected]>
    5 May 2014 13:14
    >
          How do I overcome error 150:30 with a replacement system hard
          drive on a Mac Pro?
    created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in
    /Downloading, Installing, Setting Up/ - View the full discussion
    <https://forums.adobe.com/message/6354088#6354088>

  • Hard drive configuration is not set to factory default. Refurbished Acer Iconia W3-810

    This tablet was purchased refurbished.  As soon as I got it, I went to create my backup and message is "Hard drive configuration is not set to the factory default.  Backup aborted.  I had already sent it in once to the seller for repair services and it was sent back not repaired.  They now say I can send it in again but seems a waste of time.  I called Acer and they said I would need to purchase the recovery disk which should have already been provided to me.  It does have a valid SNID number.  I checked.   If there is anyone else who came up against this problem, I would love to know what you did to resolve it.  Second problem.  Large font had been created where is overscans the entire page so reading the Control Panel is impossible.  The warranty dept created a new user account with new settings as they were unable to fix the font problem so they ignored it.  This is another reason I wanted to do a factory reset.  Hoping Acer will be kind enough to just send me the disk.   I've learned alot about refurbished products.  Never again.   

     Hard drive configuration is not set to factory default (I had this problem but mine was caused  by some third party partitioning software easeus. I am not pretty entirely sure what was your cause for the error, but I believe this workaround can be useful, even to some of the users)  I learnt a tough lesson and I am now careful on what third party soft wares one must use especially for partitioning related events using windows 8 GPT structure. This article specifically relates to windows 8 (which I was using) although similar steps may work as well in windows 7 Points note:Most newer windows devices now use the GPT partitioning system compared to the traditional MBR system.It can be very difficult to reinstall windows on a partition with GPT format.One must be careful on what 3rd party portioning tools they use. It is not recommend to use some 3rd party tools to resize partitions as these may mess the hard drive configuration in such a way that it will be very difficult to restore to factory settings (especially for devices pre-loaded with OEM-Windows 8)It is recommended to use the in-built Disk management utility to shrink/resize partitions.First and foremost, it is recommended to use system file scanner to check any files that may be corrupted (and most of these are normally fixed by sfc)Press Windows key + X, select ‘Command prompt (Admin)’. Enter the following command “sfc /scannow” (without quotes) and the system will start scanning the system. Wait until it finishes.Now we will proceed to the main fix; here are the set of steps I performed,Run CMD (Admin)Type diskpartType list diskDisk 0 Online 465 GB 19 GB * (an example of how the disk will present)
    Disk 1 Online 22 GB 0 B * Select diskDISKPART> select disk 0 list partitionDISKPART> list partition (Note you see recovery partitions flagged as OEM) So what we do is to set the id according to the GUID (Global Unique Identifier) system.Selected every partition with a OEM typeI changed their ID's to DE94BBA4-06D1-4D40-A16A-BFD50179D6AC (see below)Partition 1 OEM 1000 MB 1024 KB
    Partition 2 System 260 MB 1001 MB
    Partition 3 Reserved 128 MB 1261 MB
    Partition 4 Primary 224 GB 1389 MB
    Partition 5 OEM 350 MB 226 GB
    Partition 6 Unknown 3913 MB 226 GB
    Partition 7 Primary 200 GB 230 GB
    Partition 8 Unknown 7813 MB 430 GB
    Partition 9 OEM 7948 MB 458 GBDISKPART> select part 1Partition 1 is now the selected partition.DISKPART> set id = "de94bba4-06d1-4d40-a16a-bfd50179d6ac"DiskPart successfully set the partition ID.DISKPART> select part 5Partition 5 is now the selected partition.DISKPART> set id = "de94bba4-06d1-4d40-a16a-bfd50179d6ac"DiskPart successfully set the partition ID.DISKPART> select part 9Partition 9 is now the selected partition.DISKPART> set id = "de94bba4-06d1-4d40-a16a-bfd50179d6ac"DiskPart successfully set the partition ID.  Here is a screenshot (please note this is not a screenshot I made, I downloaded it online and I give thanks to the uploader) is just for education purposes. The issue should be solved. Now you can try system refresh/reinstall to factory settings (or create a recovery media)*In my case and others I researched on internet, it turns EASEUS partition master was the culprit, please don’t use that software if you don’t know what you are doing. (With all respect to EASEUS) I think this tool is still not configured well to work with the GPT partition format.

  • I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

    I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

    So you have backed up the content of the computer's hard drive, too?
    That usually is a great idea since it is possible to lose use of the system
    if parts of it have accidentally been removed or get over-written, or the
    main system files get corrupted, when the hard disk drive gets too full.
    If you have not trashed the originals of your created content, that remain
    after you made copies on an external hard drive or other device, then
    that is what you'd have to do to reclaim the capacity still in use by them.
    What are specifications of the hard disk drive? The unused capacity
    verses the used, in GB? If the hard drive has less than 15 to 20%
    free or unused capacity, you could run into trouble. Mine are 40-50%
    unused hard drive space, so ample room is available for automatic
    Virtual Memory to use that capacity as temporary swap file space.
    This is helpful when the computer could use more physical RAM
    memory capacity, but doesn't have it. Or if the RAM is maxxed out
    and you can't add any more. Virtual Memory is part of OS X and the
    system automatically can use as much as is available, but it is better
    to be sure there is plenty of resources available to include chip RAM
    as well as unused or free hard drive capacity for use as VM.
    If for some reason your files in Trash won't go away when you empty
    it, you may have to restart. Be sure you have not included any System
    files in the content in the Trash, or the Mac may not start up later on.
    You may have to boot the computer from the install-restore OS X DVD
    and run Repair Disk from its version of Disk Utility, to be sure it's OK.
    I'm guessing that by now you know enough about the vintage system
    in the older hardware to figure it out, so I won't write about it now.
    In any event... hopefully you can simply trash the files, but check them
    carefully, & you may need to remove (copy to archive first) even more.
    Good luck & happy computing!

  • Hard Drive Configure for MacBook Pro HD Editing

    Can someone give me some advice on a two hard drive configuration that could be hot swappable.
    I was told that I need two hard drives together to maximize speed for Proress 10 bit hd editing. Can you explain how configuring two hard drives gives me more speed to give me more real time cap.
    I have seen a Lacie 2big swappable ext hard drive system and if I get the e sata connection. would that be fast enough if so what Raid system would be best.
    Thanks for any input.

    www.caldigit.com
    FirewireVR
    S2VR Duo
    Explaination of the various RAID levels:
    http://en.wikipedia.org/wiki/StandardRAIDlevels
    what Raid system would be best.
    For...? What type of footage are you trying to work with? RAID 5 is the best...Protection and speed. Look at the HDone for that. And look at www.maxxdigtial.com, sonnettech.com, g-technology.com...
    LaCie? Consumer level...bad rep.
    Shane

  • June-July 2013 Video Editing Hard Drive Configuration - ideas welcome!

    Greetings Adobe Community,
    I am a new member and this is my first question. I appreciate any knowledgable and experienced advice for my Hard Drive Setup.
    My new system:
    CPU: Intel i7 3930k
    MOBO: Asus P9X79 DELUXE
    CPU Cooler: CM TPC 812 (Starting with Air cooling, hestitant to use liquid for now)
    RAM: 64GB Corsair Vengeance (1600MHz) (8GB ea. obviously)
    GPU: GTX 650 Ti Boost  (went slim here with plan to sell & upgrade as needed or suggested)
    Case/Tower: CM Storm Stryker
    PSU: Seasonic 80+ Platinum  860W (currently overkill)
    OS: WIndows 7 Pro (with option to  upgrade to 8)
    Optical Drives: Pioneer BD writer & LG DVD writer (excited about and anticipating a commercial version of new Petabyte optical technology
    --> http://www.extremetech.com/computing/159245-new-optical-laser-can-increase-dvd-storage-up- to-one-petabyte
    Now, I am open to any suggestions that might be a bottleneck above, but my main question is about my my Hard Drive Configuration:
    I have the following hard drives:
    2 x Samsung 840 Pro 256GB SSD
    2 x 1TB WD Caviar Black HDD (7200RPM)
    2 x 3TB Seagate Barracuda HDD (7200RPM)
    I am looking for the best speed, performance and usage of these drives for cs6 Master Collection, with special consideration given to Premiere Pro, AE, and Photoshop.
    (FYI: I will be backing up all important files to an external HHD and burning final projects to BD)
    My plan inspired by suggestions on AF and elsewhere:
    1.) C: 1 x Samsung SSD: OS & Programs
    2.) D: 1 x Samsung SSD: Media Cache & Previews
    3.) E: 1 x Seagate 3TB HDD for Exports (Should I buy another and raid it?)
    4.) F: 2 x WD 1TBs in Raid 0 for Projects
    5.) G: 1 x Seagate 3TB HHD for Media (should I add buy another and raid it?)
    6.)))<BONUS Drive> I am planning on running some tests to see how much max RAM I can use, and whatever is not being used, I am hoping to hear some positive feedback on making a RAMdisk or a couple of them.   (I have seen unbelievable benchmarks for them.)  If it is recommended, could I use a RAMdisk for {2.- Media Cache & Preview} or should I just use it for Pagefiles and other Caches and temporary files? (or forgo it altogether?)
    I know this is a loaded question, and I am open to other suggestions that might include buying ~$300 in additional drives if it will increase speed and performance tremendously.
    Thank you all for reading & I am really looking foward to learning from your knowledge and experience in this area!

    Mike,
    Check. SATA 6G port. Add a static pagefile of 1 or 2 GB here.
    Check. SATA 6G port.
    Check. SATA 3G port. No sense in raiding this and doubling the risk of data loss. Even a 25 GB export will only need ± 3 minutes or less to write.The time for export is spent on encoding, not on writing. Why take the risk and spend the money for a potential 80 - 90 second gain on each export of 25 GB? How often do you do that?
    Check. SATA 6G ports on Marvell. Make regular backups of your projects.
    Check. SATA 3G port. I would be very hesitant to raid0 the original media because of the risk of data loss.The X79 platform is designed for dedicated raid controllers and parity raids. If you need more speed, go that route.
    Forget about it. It is not practical. Windows does not allow booting without a pagefile, so it will always create a dynamic pagefile on C: if it does not find it. With 64 GB memory the pagefile will hardly be used if at all. A static pagefile of 1 GB is enough. Everytime you turn off your machine, the RAM disk gets erased and upon booting must be newly created. That means that the media cache must be newly created, indexing, conforming and creation of peakfiles must be done every time you open a project. That time lost far outweighs the potential gain of a faster RAM disk.
    Just my $ 0.02

  • Which is the optimal hard drive configuration for Logic Pro ?

    hello people
    i would like to ask your advices about possible hard drive configurations for Logic Pro
    I have a Mac Pro and thinking to buy 4 x 500GB drives .
    there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
    model 1 :
    1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
    1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
    which means to using 4 hard drives as 2 drives
    model 2 :
    1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
    1 Single drive for Sound banks (500)
    1 Single drive for Recording (500)
    which means to using 4 hard drives as 3 drives
    Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
    and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
    I am kinda rookie for these subjects :/
    thanks in advance

    heelo blayzay
    thanks for the reply and assistance.
    1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
    2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
    For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
    thank you again.

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

  • Why aren't my clips evident in my event? My project icons are there and the media IS in the event. I see it on the hard drive. HELP!

    Why aren't my clips evident in my event? My project icons are there and the media IS in the event. I see it on the hard drive. HELP!
    It is the strangest thing. I click on the project and it is there with all the stuff and cuts, etc., but no clips in the event!
    Thank you.

    You u r right.
    Thanks I figured it out. It was the sort by preference toggle UP TOP for clips. I was fabulously ignorant of it till this AM. Thank you very much for answering. 
    Mike S

  • What are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air

    what are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air?

    "Memory" in this case means RAM, the working space for the processor in the iPad. It is different from storage space, the latter being what is referred to by the "32GB", "64GB" etc. specification.
    Regards.
    Message was edited by: varjak paw

  • Why doesn't macbook pro 2.3GHz Retina display have hard drive configuration?

    When I'm about to order the macbook pro 2.3Ghz Retina display in the apple.com website. there are no hard drive configuration. the hardware configuration are only memory, apple usb super drive and apple thunderbolt. but no hardrive. why?

    Because that is the base model of the Retina Edition.
    The Retina Edition doesn't come with a Hard Drive.  It uses a Flash Drive.
    If you want a larger flash drive, you have to step up to the next model.

Maybe you are looking for