System heap value in LC10
Hi,
This is related to LC 7.5 on AIX.
I go to LC10 - LiveCache Monitoring - Current Status - Memory Areas - Heap Usage.
On the right side in "Currect value" section there is a "System Heap". How does this value gets assigned. I was in impression that "System Heap" value and OMS_HEAP_LIMIT are same but it does not seem to be same.
What is the impact of "System Heap" and how can we increase it. In production it is 30% higher than OMS_HEAP_LIMIT. In test box it is same.
Please let me know if anybody has a good understanding about this issue.
Thank you.
Sume
1) "What is dimensions of data cache and how it can be increased.
Does it mean that increase the data cache. I know how to increase
the data cache."
-> As I wrote that you could increase the value of the CACHE_SIZE
< Size of the I/O buffer cache in pages > liveCache parameter.
As you know, the primary consumers of the main memory managed in
the I/O cache are the converter and the data cache.
You could monitor the data cache usage in LC10 -> liveCache:Monitoring
-> Choose Current Status -> Memory Areas -> Caches.
=> you will see the current size values in KB & pages for
I/O Buffer Cache
Data-Cache -> current size of data cache !!
Converter
Sonstiges
Catalog-Cache
Sequence-Cache
&& current data cache usage information ...
You could review the DBAN_OMS_CACHE_OCCUPANCY.csv file of the DB Analyzer
Statistics information.
Please check the Permanently Used Area of the Data Area in liveCache,
review the statistics in DBAN_FILLING.csv file, if the DB Analyzer is
Running. In case the applications are using all data created in liveCache,
For the best performance the data need to be cashed => you will define
the dimensions of your data cache ... + the history data is saved as
pages in the data cache.
And if you have problems to identify the values for the liveCache parameters
On your system => Please create the ticket to the component 'BC-DB-LVC'
For SAP liveCache documentation in English: http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Current Status -> Memory Areas < -> Caches !! >
2) "How can I find the current filling level in % of OMS Heap.
I know that total size is defined by OMS_HEAP_LIMIT. Please let me
know if I am missing anything."
As you know, the liveCache allocates memory statically as well as
dynamically. The DATA CACHE is allocated statically.
When the database instance is started, the I/O buffer cache is created in
the main memory in accordance with the size entered in the general
database parameter CACHE_SIZE.
Additionally the liveCache allocates the OMS HEAP dynamically.
The amount of the OMS HEAP memory depends on the runtime of OMS versions
and the amount of data which is used by the transactions.
The OMS heap can grow dynamically until it reaches the maximum size
specified in the liveCache parameter OMS_HEAP_LIMIT.
For SAP liveCache documentation in English: http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Current Status -> Memory Areas < -> Heap Usage !! >
So:
-> You could use Heap Usage display in the LC10.
< Currently used column -
Size of the memory actually occupied by the OMS heap
You could mark the column + click on 'Sum' => see the sum ... >
-> You could use the Memory node in the liveCache Alert Monitor under
'Space Management' for LCA connection & you will see, for example:
Heap Usage 1 % < day/time>
Heap Usage in KB 18999 KB < day/time >
-> Sorry, I didn't get clear on another posted questions.
Could you please give the reference to the documents or notes where you saw
those sentences.
Thank you and best regards, Natalia Khlopina
Similar Messages
-
Problem in picking the system variable value in Calculation Script
Hi All,
We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
Now I am using this system variable in the calculation script as below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportOverwriteFile ON;
Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
DATAEXPORT "File" " " $DEXPORTPATH;
ENDFIX
Here "DEXPORTPATH" is the system variable
I am creating this system variable from the batch script and the system variable value varies at the runtime.
This calculation script works fine for first time and it picks the correct value from the system variable.
But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
The calc script works fine with this.
For next execution, system variable value is changed to "D:\Time\temp.txt"
Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
and performs execution which is wrong.
Please help me on this issue how to handle system variables in calc scripts.
Thanks in advance
Regards
Swathi811829 wrote:
Hi All,
We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
Now I am using this system variable in the calculation script as below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportOverwriteFile ON;
Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
DATAEXPORT "File" " " $DEXPORTPATH;
ENDFIX
Here "DEXPORTPATH" is the system variable
I am creating this system variable from the batch script and the system variable value varies at the runtime.
This calculation script works fine for first time and it picks the correct value from the system variable.
But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
The calc script works fine with this.
For next execution, system variable value is changed to "D:\Time\temp.txt"
Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
and performs execution which is wrong.
Please help me on this issue how to handle system variables in calc scripts.
Thanks in advance
Regards
SwathiAs of my knowledge system variables will not update immediately...you need to log off the session after changing the value.
Update the system variable..
Log off from the session..
And Re-login with the same username ....and check...
Regards,
Prabhas -
System.ArgumentNullException: Value cannot be null.
We have an application that utilizes the WCF-OracleDB adapter on a send port connecting to an Oracle database. The application sends insert statements to a stored procedure that inserts the data into one of the tables. The table has a column for City Fee
Amount that allows NULL values. The schema that we populate the insert statement into contains a corresponding node called "P_CITY_FEE_AMT", that node is also set to allow null values. WE are running into an intermittent issue in which an error message
is returned to BizTalk stating the value for field P_CITY_FEE_AMT cannot be NULL. We are not seeing any error messages in the Oracle database so it appears the error is being generated by the adapter. Any ideas as to why it would be generating an error like
this when the schema and the target table both allow NULL values for this field?
Error Message:
A message sent to adapter "WCF-OracleDB" on send port "SendSproc" with URI "oracledb://test" is suspended.
Error details: Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The value for field "P_CITY_FEE_AMT" is invalid. ---> System.ArgumentNullException: Value cannot be null.
Parameter name: numStr
at Oracle.DataAccess.Types.OracleDecimal..ctor(String numStr, String format)
at Microsoft.Adapters.OracleCommon.OracleCommonMetadataUtils.CreateParameterValue(OracleDbType oracleType, Object xmlValue, OracleConnection dbConn, Boolean ignoreLOB, String fieldName)
--- End of inner exception stack trace ---
Server stack trace:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
MessageId: {A4503B09-51A0-48B7-915C-753100D250A7}
InstanceID: {D8DC8808-41B9-47CC-A790-ACA0963E5BFE
Insert Message:
<ns0:TSA103 xmlns:ns0="http://Microsoft.LobServices.OracleDB/2007/03/BIZTALK/Procedure">
<ns0:P_CITY_FEE_AMT/>
<ns0:P_NO_LOCATIONS_NBR>1</ns0:P_NO_LOCATIONS_NBR>
<ns0:P_STATE_FEE_AMT>12.00</ns0:P_STATE_FEE_AMT>
<ns0:P_DOC_LOC_NBR_REGION>1234567890</ns0:P_DOC_LOC_NBR_REGION>
<ns0:P_DLN_OCCUR_ID_REGION>0</ns0:P_DLN_OCCUR_ID_REGION>
<ns0:P_REGION_CD>MAR</ns0:P_REGION_CD>
<ns0:P_UPDATE_IF_EXISTS_INDC>N</ns0:P_UPDATE_IF_EXISTS_INDC>
</ns0:TSA103>
Thanks, BruceHi Bruce,
Have you configured SOAP Action Header property at WCF-OracleDB send port.
Refer the post->
https://social.msdn.microsoft.com/Forums/en-US/238fdee1-564e-45cc-be96-6215af682b1e/exception-on-outbound-map-with-wcforacledb-adapter-at-send-port-in-biztalk-2010?forum=biztalkr2adapters
For the alternate solution you can also refer the workaround mentioned here ->
Error while inserting NULL value to Oracle database table using BizTalk
Rachit
Please mark as answer or vote as helpful if my reply does -
Dear all,
Is it possible to extract the exchange rate from a user-defined field in the row details of an invoice document to compute for the system currency value of the invoice journal entries, instead of using the rate maintained in the Exchange Rates and Indexes table? Please refer to the desired journal entries below.
To Illustrate:
Exchange Rate Maintained in SAP B1 Table = 44.20
Basic Initialization Settings:
Local Currency = PHP
System Currency = USD
Exchange Rate Maintained in User-defined Field (INV1) = 44.00
Invoice Details:
Transaction Currency = Local Currency (PHP)
BP Currency = Multicurrency
Doc Total = PHP 30,000
Journal Entries Posted from AR Invoice:
Debit Debit (System Currency)
BP Control Account PHP 30000 678.73 (PHP 30000/ 44.20)
_Desired Journal Entries to be Posted from AR Invoice:_
Debit Debit (System Currency)
BP Control Account PHP 30000 681.82 (PHP 30000 /44 )
Your feedback shall be very much appreciated.
Thank you,
DonaIt may be possible to achieve this using a crystal report to recalculate the vaues. My question though is why is this necessary?
-
System generated value for a field and incrementing (using module pool pro)
Hi,
I'm getting system generated value for a field and incrementing (i.e done by coding) when i'm saving the screen or transaction (which is created using module pool programming) while modifying, saving its working fine, but when i'm going out of the screen or exit n again i start the screen (with some ztransco) the value for the field again starting from 0 so i want to start from the same value for a field where we exit or got out from the screen n incremented respectively while saving the screen,
Thanks & Regards,
MS
Edited by: Rob Burbank on May 4, 2010 10:40 AMSearch the forum for number range objects.
Rob -
APPLICATION에 접속하지 않고 SYSTEM PROFILE VALUE를 SETTING 하는법
제품 : AOL
작성날짜 : 2006-05-23
APPLICATION에 접속하지 않고 SYSTEM PROFILE VALUE를 SETTING 하는법
================================================================
PURPOSE
Application에 접속하지 않고 profile option value를 setting 하는 방법을
알아본다.
(11.5.4 ~ 11.5.10)
Explanation
Application에 접속하지 않고 profile option 값을 setting 하기 위해서는
FND_PROFILE package의 SAVE function을 이용해야 한다.
그러나 "update" 문장을 이용하여 직접 table을 update하는 것은 지원되지
않는다.
Test case로 아래는 "Guest User Password" profile option 값을 'GUEST/
ORACLE'로 변경하는 자세한 절차이다.
Application 화면에서 보여지는 name은 user가 알기 쉬운 name이긴 하지만,
function은 profile option의 internal name을 취해야 하므로 internal name
을 먼저 확인해야 한다.
1.Apps user로 접속하여 아래 select 문을 이용하여 profile option의
internal name을 확인한다.
SQL> select profile_option_name
from fnd_profile_options_tl
where user_profile_option_name like
'<Your Profile Option User Name or Part of it>';
e.g. "Guest User Password" profile option에 대한 internal name이
'GUEST_USER_PWD' 임을 아래 select 문으로 확인 할 수 있다.
SQL> select profile_option_name
from fnd_profile_options_tl
where user_profile_option_name like 'Guest%';
PROFILE_OPTION_NAME
GUEST_USER_PWD
위 userr profile option name을 대소문자 구분하여 적어 놓는다.
2.Profile option에 필요한 값을 setting 하기 위해 아래 sample code를
이용한다.
===========
Sample Code
===========
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('GUEST_USER_PWD', 'GUEST/ORACLE', 'SITE');
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
===============
End of Sample Code
===============
SAVE function parameters에 대한 설명은 아래와 같다.
function SAVE(
X_NAME in varchar2,
/* Profile name you are setting */
X_VALUE in varchar2,
/* Profile value you are setting */
X_LEVEL_NAME in varchar2,
/* Level that you're setting at: 'SITE','APPL','RESP','USER', etc. */
X_LEVEL_VALUE in varchar2 default NULL,
/* Level value that you are setting at, e.g. user id for 'USER' level.
X_LEVEL_VALUE is not used at site level. */
X_LEVEL_VALUE_APP_ID in varchar2 default NULL,
/* Used for 'RESP' and 'SERVRESP' level; Resp Application_Id. */
X_LEVEL_VALUE2 in varchar2 default NULL
/* 2nd Level value that you are setting at. This is for the 'SERVRESP'
hierarchy. */
) return boolean;
Reference Documents
Note 364503.1 -
Hello ,
under system profiles >> Profile Option Name , Site , Application , Responsibility , User ,.....etc
lets say i have this respo. named "xxx_payroll_US"
and profile named : HR:Business Group
is there anyway i can get the values under responsibility from sql query
if not what is the related tables??
thanks in adavnce
Message was edited by:
ALJazzarThanks Guys, but it seems that the answer is not what i exepected
Step By Step Senario>>
1 -login to the oracle app
2- use the sysadmin resp.
3- under profile choose system
4-a window pop -up named " find system profile values"
5-check resp and type xxx_payroll_USA
6-next to profile textfiled typr HR:BusinessGroup
the case is
if i press find it will give me the profile option value under the respobility name
is that clear????
in the given script it shows 0 ( nothing)
thanks and regards, -
How can i transfer the system variable value through DTW in SBO
Hi,
I want to transfer the system variable("Excisable" in the Item master data in the SBO 'India' database) value through the template by the DTW.
But i don't have any template consisting of this system variable.
So please suggest me that how can i transfer the value of this system variable(Excisable) and by which template.Please tell me any constraint if it is on the value of this variable.
I will be very thankful to you.
Thanks & Regard,
Sandeep
Message was edited by:
Marc RiarSandeep,
This question has come up several times on this Forum.
Please read this read.
Importing excisable item
Suda -
I have a list that has more than 12 columns of type lookup with more than 5000 items and I am using a date field as an indexed column so I can restrict the results to meet the list view threshold. I am also using $select to restrict the columns to
meet the lookup column threshold.
If I run the query below it all works as expected:
_api/web/Lists/MyList/items/?$Filter=Created gt '2015-03-10T05:00:00.000Z' and Created lt '2015-03-17T18:25:00.712Z'&$select=Lookup1/Id&$expand=Lookup1
If I run this query it does not work:
_api/web/Lists/MyList/items/?$Filter=Created gt '2015-03-10T05:00:00.000Z' and Created lt '2015-03-17T18:25:00.712Z'&$select=Lookup1/Title&$expand=Lookup1
Error:
<m:error xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<m:code>-2147024809, System.ArgumentException</m:code>
<m:message xml:lang="en-US">Value does not fall within the expected range.</m:message>
</m:error>
The lookup column "Lookup1" is using Title as the column's information and this should be working. What is interesting is that changing the lookup threshold has no effect on this but raising the list item view limit does make it work. The
date range is selecting less than 5000 items. So what am I missing here? I just want the Title for the lookup column and my query has about 10 items in it.Looking through the logs the error is thrown due to the following error messages:
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
Fields 84h8
High Field with internal name 'LookupFieldName_x005f_Title' already exists in the field cache
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
Fields ki9p
High Unable to add join related fields to the Query.[Error 0x80070057]
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General xxpm
High Unable to execute query: Error 0x80070057
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General 8e2s
Medium Unknown SPRequest error occurred. More information: 0x80070057
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General aix9j
High SPRequest.GetListItemDataWithCallback2: UserPrincipalName=<removed>, AppPrincipalName= ,pSqlClient=<null> ,bstrUrl=siteUrl ,bstrListName=<removed> ,bstrViewName=<null> ,bstrViewXml=<View
Scope="RecursiveAll"><Query><Where><Eq><FieldRef Name="ID" /><Value Type="Counter">5481</Value></Eq></Where></Query><ViewFields><FieldRef Name="LookupFieldName"
LookupId="TRUE" /><FieldRef Name="LookupFieldName_x005f_Title" /></ViewFields><ProjectedFields><Field Name="LookupFieldName_x005f_Title" Type="Looku ,fSafeArrayFlags=SAFEARRAYFLAG_DATES_IN_UTC
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
The very first message states that it is unable to add join related fields, what could be the possible cause of this? As you can see rather than specifying a date range which I know contains less than 5000 items, even filtering based on ID gives the
same result. -
:system.cursor_block value does not change when mouse click
Form created with Forms version 6.0.8.8.0. Consists of a control block that has the toolbar buttons, a filter control block that contains item, and a data block. The filter control block and data block are on a tabbed canvas. There are 3 tabs with corresponding filter control block and data block on each.After the data block is queried, code sets the navigation to the control block with the go_item built-in. The user would use a mouse click on the filter control block on one of the tabs to activate an LOV, code is in a generic when-mouse-click trigger that will determine the item focus with the value in the system variable :system.cursor_block. Works for the first tab. Does not work for 2nd or 3rd tab. On-error trigger does not capture any error. Values for :system.cursor_block for tab 1 show that value before mouse click is 'control.detail' and after mouse click is 'filter.a'. For tabs 2 and 3 the value before mouse lick is 'control.detail' and after mouse click is 'control.detail' instead of 'fiter.b' or 'filter.c'. Verified that the 3 filter blocks are identical. Can anyone shed some light on this anomoly? I have been looking for this solution (many different iterations and changes to trap it) for too long.
:System.Cursor_Block reports the name of a block, NOT a BlockName.ItemName.
Use :System.Trigger_Item with your mouse click, or :System.Cursor_Item. -
Catching System.Exit(value) in a unix script
I am migrating a java application from Windows to Unix, where on the Unix environment it will be run under a batch scheduler.
I am trying to figure out how to get Unix script 'visibility' to the contents of system.exit().
At program completion, system.exit is called with either a 0 (all's cool) or -1 (this dog won't hunt).
I cannot figure out how to get that value communicated back to the invoking script, which currently looks something like:
cp=<classpath>
rm -f /staging/*
$JAVA_HOME/bin/java ........
rc=$?
<if 'rc' = 0>
{ :perform this }
<if 'rc' = -1>
{ :perform this instead }
Any suggestions?rc=$? suggests it's Bourne shell you're running the script with?
if [ $rc .eq. 0 ]; then
echo "Bingo!"
else
echo "Oh shit..."
fi
Better yet, do "man sh" from a unix command prompt -- it gives you the full scoop. -
ITunes sync executables crashes with long System Variable Value
There is a System Variable: ESET_OPTIONS on my PC. The value of it is 2079 white spaces,
It looks like iTunes sync executables crashes when it trying to sync my iphone5s with outlook due to this System Variable.
I'm using Windows 8.1 x64 and outlook 2013 pro+ x64, both with latest updates installed. iTunes 11.1.4 for Windows (64-bit)
The iTunes sync log is below:
********************START OF LOG********************
=====================================
com.apple.Outlook.client.exe begins
=====================================
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] parent process: 5256 "SyncServer.exe"
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] main thread 2708
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] command line: "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.Outlook.client.exe" --sync com.apple.Outlook --entitynames "com.apple.contacts.Contact,com.apple.contacts.Date,com.apple.contacts.Email Address,com.apple.contacts.Group,com.apple.contacts.IM,com.apple.contacts.Phone Number,com.apple.contacts.Related Name,com.apple.contacts.Street Address,com.apple.contacts.URL"
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ALLUSERSPROFILE=C:\ProgramData
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] APPDATA=C:\Users\***MASKED***\AppData\Roaming
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] asl.log=Destination=file
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] CommonProgramFiles=C:\Program Files (x86)\Common Files
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] CommonProgramW6432=C:\Program Files\Common Files
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] COMPUTERNAME=***MASKED***
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ComSpec=C:\Windows\system32\cmd.exe
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ESET_OPTIONS=
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] FP_NO_HOST_CHECK=NO
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] HOMEDRIVE=C:
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] HOMEPATH=\Users\***MASKED***
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] LOCALAPPDATA=C:\Users\***MASKED***\AppData\Local
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] LOGONSERVER=\\MicrosoftAccount
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] NUMBER_OF_PROCESSORS=8
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] OS=Windows_NT
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] Path=C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\Syst em32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\Intel® Management Engine Components\DAL;C:\Program Files\Intel\Intel® Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel® Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel® Management Engine Components\IPT;C:\Program Files (x86)\Common Files\Apple\Apple Application Support\;C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\;C:\Program Files (x86)\Common Files\Apple\Apple Application Support\;C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\;C:\Program Files (x86)\Common Files\Apple\Apple Application Support\;C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PROCESSOR_ARCHITECTURE=x86
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PROCESSOR_ARCHITEW6432=AMD64
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 60 Stepping 3, GenuineIntel
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PROCESSOR_LEVEL=6
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PROCESSOR_REVISION=3c03
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ProgramData=C:\ProgramData
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ProgramFiles=C:\Program Files (x86)
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ProgramFiles(x86)=C:\Program Files (x86)
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] ProgramW6432=C:\Program Files
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] PUBLIC=C:\Users\Public
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] SESSIONNAME=Console
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] SYNCSERVICES_CLIENT_IDENTIFIER=com.apple.Outlook
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] SYNCSERVICES_ENTITY_NAMES=com.apple.contacts.Contact,com.apple.contacts.Date,co m.apple.contacts.Email Address,com.apple.contacts.Group,com.apple.contacts.IM,com.apple.contacts.Phone Number,com.apple.contacts.Related Name,com.apple.contacts.Street Address,com.apple.contacts.URL
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] SYNCSERVICES_PLAN_IDENTIFIER=D8FE346E-4023-9D49-B157-183089DE3138
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] SystemDrive=C:
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] SystemRoot=C:\Windows
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] TEMP=C:\Users\***MASKED***\AppData\Local\Temp
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] TMP=C:\Users\***MASKED***\AppData\Local\Temp
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] USERDOMAIN=***MASKED***
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] USERDOMAIN_ROAMINGPROFILE=***MASKED***
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] USERNAME=***MASKED***
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] USERPROFILE=C:\Users\***MASKED***
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe] windir=C:\Windows
[4000 @ Tue Feb 25 02:04:50 2014] [YSLog com.apple.Outlook.client.exe] defaults key ShouldLog in domain com.apple.Outlook.client.exe is (null)
[4000 @ Tue Feb 25 02:04:50 2014] [com.apple.Outlook.client:AppleSyncMapiInterface ASLog] |Info| Trying to load the Mapi library directly.
[4000 @ Tue Feb 25 02:04:50 2014] [com.apple.Outlook.client:AppleSyncMapiInterface ASLog] |Info| Failed loading the Mapi library directly.
[4000 @ Tue Feb 25 02:04:50 2014] [com.apple.Outlook.client:AppleSyncMapiInterface ASLog] |Info| Trying with RPC...
[4000 @ Tue Feb 25 02:04:50 2014] [com.apple.Outlook.client:AppleSyncMapiInterface ASLog] |Info| Trying to load the Mapi library using RPC.
[4000 @ Tue Feb 25 02:04:50 2014] [com.apple.Outlook.client:AppleSyncMapiInterface ASLog] |Info| Generated string for RPC portName: com.apple.Outlook.client_4000:315@537
[4000 @ Tue Feb 25 02:04:50 2014] [com.apple.Outlook.client:AppleSyncMapiInterface ASLog] |Info| Launching separate process: AppleSyncMapiInterfaceHelper_x64.exe...
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Starting AppleSyncMapiInterfaceHelper_x64.exe...
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function MAPIInitialize loaded successfully.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function MAPIUninitialize loaded successfully.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function MAPILogonEx loaded successfully.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function MAPIFreeBuffer loaded successfully.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Warning| Failed to load function FreeProws@4.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function FreeProws loaded successfully.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function MAPIAdminProfiles loaded successfully.
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Function MAPICrashRecovery loaded successfully.
[4000 @ Tue Feb 25 02:04:50 2014] [_ISDVLog com.apple.Outlook.client.exe] com.apple.Outlook: fast sync com.apple.contacts.Contact, com.apple.contacts.Date, com.apple.contacts.Email Address, com.apple.contacts.Group, com.apple.contacts.IM, com.apple.contacts.Phone Number, com.apple.contacts.Related Name, com.apple.contacts.Street Address, com.apple.contacts.URL
[5824 @ Tue Feb 25 02:04:50 2014] [_ISDVLog AppleMobileSync.exe] com.apple.MobileSync.213179319b9161f4527a9911d560f93c800bd5d3: fast sync com.apple.contacts.Contact, com.apple.contacts.Date, com.apple.contacts.Email Address, com.apple.contacts.Group, com.apple.contacts.IM, com.apple.contacts.Phone Number, com.apple.contacts.Related Name, com.apple.contacts.Street Address, com.apple.contacts.URL
[1724 @ Tue Feb 25 02:04:50 2014] [AppleSyncMapiInterfaceHelper_x64 ASLog] |Info| Exiting AppleSyncMapiInterfaceHelper_x64.exe.
[4000 @ Tue Feb 25 02:04:50 2014] [YSLoader com.apple.Outlook.client.exe]
===================================
com.apple.Outlook.client.exe ends
===================================
[5256 @ Tue Feb 25 02:04:50 2014] [com.apple.console SyncServer.exe] *** Assertion failure in -[ISDSyncManager environment], ISDSyncManager.m:452
[5256 @ Tue Feb 25 02:04:50 2014] [_ISDVLog SyncServer.exe] main, exception during initializeServer. Name: 'NSInternalInconsistencyException', reason: 'malformed value: ESET_OPTIONS='
Stack:(
[5256 @ Tue Feb 25 02:04:50 2014] [YSLoader SyncServer.exe]
=====================
SyncServer.exe ends
=====================
[5824 @ Tue Feb 25 02:06:03 2014] [YSLoader AppleMobileSync.exe]
==========================
AppleMobileSync.exe ends
==========================
[5272 @ Tue Feb 25 02:06:05 2014] [YSLoader AppleMobileDeviceHelper.exe]
==================================
AppleMobileDeviceHelper.exe ends
==================================
[5584 @ Tue Feb 25 02:06:05 2014] [com.apple.SyncServices.AppleMobileDeviceHelper AppleMobileDeviceHelper.exe] Exception NSPortSendException while handling message: [NSMessagePort sendBeforeDate:] Cannot send (-3).
Message: {
AMSMessageSignatureKey = (
AMSTargetIdentifierKey
AMSRequestKey = AMSGetDataClassInfoForTargetRequest;
AMSTargetIdentifierKey = 213179319b9161f4527a9911d560f93c800bd5d3;
********************END OF LOG********************For now, I have to remove the System Variable so that iTunes can sync with outlook.We're a user to user forum, Yuki.
If you'd like to submit a trackable bug report, you could try registering (for free) as an Apple Developer:
https://developer.apple.com/register/index.action
I think you're then able to use the Apple Bug Reporter (and get feedback on any submissions). -
How system picks value from Tax Code
Dear Experts,
I have one scenario,
In our pricing procedure there are tax condition types for which there are no condition records maintained. But the values are maintained in Tax Code.
My doubt is, do we have to add these tax condition types in pricing procedure as they are already in Tax Code ?? Because I observed few condition types are not there in pricing procedure but the same are in Tax Code.
Second, how the system comes to know that there is no condition record and the value is in Tax code. How does it determine and pick the value from Tax code.
Thanks in advance
SagarSagar,
Let me try to clear your confusion :
For Total determination of pricing we have two things
Pricing Procedure and Tax Procedure.
Pricing Procedure tell system about the what and how the price to calculated for material in Sale Order.
In this pricing procedure the conditions JIN1 JIN2 etc ares pertaining to tax applicable on the Sale order Price.
These conditions display the tax.
Now the tax is calculated based on tax procedure.
And a Tax procedure acts as a master and there is one tax procedure for one country.
for that particular tax procedure there are tax codes defined.
These Tax codes allows the using the same tax procedure but changing value of various conditions and removing which we dont require.
Lets take an example : AS TAXINN is tax procedure for India. Based in this procedure many tax codes are defined for 12% vat, 6% vat , no vat etc.
So what kind of tax will be applicable on the Sale order is governed by tax code which is mentioned in customer master.
Based on this tax code taxes are calculated on Sales order net value and then the tax amount is displayed in pricing procedure
You assign the tax condition types to Pricing procedure so that it will display the taxes in the sales order.
I hope it will clear some of your doubts. Please let me know if you need further assistance.
Thanks,
Raja -
Changing System Preference value
Hi
Have been trying to change a keyboard shortcut in the "Expose and Spaces" pane. By default the dashboard shortcut is set to "F12" and I would like to set it to "F8". This would become an option for a user when they have logged in. They could run the script to free up the "F12" shortcut that's in use by another programme. Thought the following code would have worked:
tell application "System Events"
tell process "System Preferences"
set value of pop up button 4 of group 2 of tab group 1 of window "Exposé & Spaces" to "F8"
end tell
end tell
If anyone out there has any clues to get this working I would be grateful. Ideally a "defaults write" shell command would be the preferred route. I'm open to all suggestions.
ThanksHi,
These preferences are scriptable under Leopard via System Events, and although you don't say specifically, I'm assuming that you're running Leopard because you're using Spaces.
The problem is that the default shortcut for Spaces is already set to F8, and if you don't change it to something else first then you can't set the Dashboard shortcut to F8.
This works for me:
tell application "System Events"
tell expose preferences
set properties of show spaces shortcut to {function key:F7}
set properties of dashboard shortcut to {function key:F8}
end tell
end tell
When the script is compiled or run the third line changes to:
set properties of application bindings to {function key:F7}
But F7 continues to work as the shortcut for showing Spaces. A bug, I reckon.
Hope this helps.
H -
System.exit(VALUE) and Windows 98?
Has anyone got System.exit(integer) to return a value other than 0 under Windows 98?
Regardless of what integer I enter as an exit code, java.exe always seems to return 0. This does not seem to be the case under Windows NT, where the correct exit code is passed back.
Is anyone aware of this problem/found a workaround?I found the same behaviour of Java between NT 4.0 SP 4 and Windows 98.
Are you sure you get the exit code right in the dos box?
%ERRORLEVEL% is NT specific, I think.
In normal DOS you can only ask e.g.:
if ERRORLEVEL 3 goto three
and this will jump to label
:three
if the exit code is >= 3 !!!
Test your program by this bat file:
java ...
if %errorlevel 6 goto x6
if %errorlevel 5 goto x5
if %errorlevel 4 goto x4
if %errorlevel 3 goto x3
if %errorlevel 2 goto x2
if %errorlevel 1 goto x1
goto x0
:x0
echo was: 0
goto end
:x1
echo was: 1
goto end
:x2
echo was: 2
goto end
:x3
echo was: 3
goto end
:x4
echo was: 4
goto end
:x5
echo was: 5
goto end
:x6
echo was: 6
goto end
:end
echo End.
You see:
7 or higher goes also to :x6
Maybe you are looking for
-
Error when trying to create a Composite Application Services project
Hi Experts, I am facing a problem while trying to create a project using NWDS 7.0 SP 13 New Development Component Project-> Composite Application Services then pressing finish, it throws an error as follows "Generation can not completed due to one o
-
Help! Video's won't play. It says playing on AirPlay on 'null'. What should I do?
-
Why does the PC lockup when using a 6071E with an ASUS P5ND2-SLI motherboard?
Please Help, Thanks, Brian Problem Summary: PC locks up to a point that will not allow keyboard control. Sometimes the system reboots itself. This code works on Win2000 systems and XP systems with a different motherboard. I have the Hyperthreading
-
Where should I save the playlists file
In what specific file on my computer should i save my iTunes personal playlists files
-
Reinstalling photoshop elements 10 not indexed
I installed Photoshop Elements 10 on my new iMac (previously installed on my older imac). After installing the software and launching the organizer, it asked me to index my photos. Custom reindexing 11000 plus photos is not a pleasant thought. Ho