System is not recording the Service details while doing recording of ML81N

Dear PP experts,
Please help me on this.I am doing the recording of transaction ML81N through SHDB but system is not capturing the fields of formula variables while maintaining the service details only. else everything it is capturing.. please suggest me what to do.
Thanks & Regards
Nitin Kapoor

Expert please respond to the query.

Similar Messages

FI-AP Tax Code not considering the excise duty while calcuating the VAT

Sub: A/P Tax Code not considering the excise duty while calcuating the VAT
Hi Frnds.
I have a typical problem.
Till now we are using a "W6" as a tax code, where Excise-10%, Ed Cess-2%, SEd Cess-1% and VAT-4%.
But as the Govt. rules changed I have created a new tax code "W8" by copying the W6 and modified the VAT to 5% by changing the condition record JVRD.
The new tax code is not calculating VAT part correctly. It is taxing into consideration Invoice Base value, Ed Cess & SEd Cess (Omiting the Excise Duty).
I have checked my Tax Procedure, there everything is fine. Even my old tax code "W6" is working correctly.
Let me know where the error lies.
Here is the scenario
00. Tax code                       -   W6   -   W8   - Current Staus of W8
01. Invoice Base               - 355181 - 351798 - 353324 (by SAP Document Simulation View)
02. Excise @ 10% on 01.        - 35518 - 35180 - 35332
03. Ed Cess @ 2% on 01.        -    710 -    704 -    707
04. SEd Cess @ 1% on 01.       -    355 -    352 -    353
05. VAT @ 4% on (010203+04) - 15671 -   0     - 0
05.    VAT @ 5% on (010203+04) -    0    - 19401 - 0
05.     VAT @ 5% on (010304)     -   0     -    0    - 17719
INVOICE TOTAL VALUE            - 407435 - 407435 - 407435
Pls. let me know how to come over the issue.
By the way I am using the above tax code at FB60 transaction code.
Regards
Krishna
Edited by: Gopi Krishna Gutti on Oct 17, 2011 10:18 AM

Hi Vivek
Acutually we planned to implement SAP - FI & MM Modules only, and all the configuration is done in the system, but at the final stage our management is not satisfied with MM area, so finally we have gone live with only FI Moudle.
By the way thankyou for the reply. I have maintained 100% in JMX1 for the new tax code and it is working fine.
I will give you full points.
Once again thanks a lot.
Regards
Krishna

Unable to retrive the service details

Good day.
After i've restarted the UCCX mashine,in the control center i have the "Unable to retrive the service details" and "java.lang.Null.pointer.exception" concerning to the recording and statistics service.
But the service itself working properly.
CRS 4.5
What can it be?
What is the solution?

Good day.
To say the truth i wasn't able to solve the problem.
I'd no smartnet,so i wasn't able contact TAC.
I've been told,it can be fixed by tracing system variables by Java programmer.
But,i don't know Java at all.
Installing patches and fixes,all avaiable,didn't solve the problem.
So,the system works so since i've opened discussion.
Sorry,but i've no solution for this

The system could not calculate the fiscal year start or finish date message

While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
Message no. FI 500
The system could not calculate the fiscal year start or finish date.
WE are using year dependent fiscal year and are implementing Funds Management for the first time.
SAP Version 4.0 B
Priority Urgent
For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

No, there is no bug.
Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
Cheers

Http to RFC [http adapter issue] - The system can not locate the resource.

Hi,
When I post the message with http client, I am getting the below error.
Line 33: The system can not locate the resource specified.
i.e --> xhttp.send (payload);
It is a java script error.
Result URL:
http://xxx.xxx.xxx.xxx:8000/sap/xi/adapter_plain?namespace=http%3A//www.cisco.com/httptobapi&interface=MI_request_response_cisco&service=BS_HTTP_CISCO&party=&agency=&scheme=&QOS=BE&sap-user=xxxxX&sap-password=xxxx&sap-client=500&sap-language=EN
Any idea what went wrong?
Thanks
Balaji

hi,
I have given all the details correct.
Server Host,Port, Client, Sender Service, Interface and namespace and then payload.
It looks like problem is with http client. It is not posting the data correctly.
I tried on 2 different systems.
On one system it gave a problem at line 33 which i mentioned at the first post.
And second system gave line: 27 Permission denied.
Line 27 : xhttp.open ("POST", reqString, false);
Payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_request_sales_cisco xmlns:ns0="http://www.cisco.com/httptobapi">
<Customer_Number>1002</Customer_Number>
<Sales_Organization>1000</Sales_Organization>
</ns0:MT_request_sales_cisco>
Thanks
Balaji

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

What are the main steps to be taken care while doing recording for LSMW

Hi,
I am facing problem in LSMW.
Can anybody suggest me that What are the main steps to be taken care while doing recording for LSMW for recording mm01 ?
thanks'
naresh

Hi,
Recording in LSMW is similar as SHDB.
in LSMW after you give Project-Subproject and Object.
1)Go to-> Maintain Object Attributes -> double click
2)Press Display/Change Button at top left to make editable mode.
3)Select radiobuton -> Batch Input -> Give Recording name say Z_mm01
4) Click the Recording Overview boton on right -> Give TCode which u want to record....
Rest refer the Document link attached.
Please find the links to various threads on the same.
Re: LSMW - Using a BAPI
BAPI, IDOC in LSMW
Upload the data in LSMW using BAPI
This one is the most complete document for the same
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://service.sap.com/lsmw.
Regards
Kiran

DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service

It is really a pain, dissatisfaction, and a lot more when you have Verizon as your service provider. I have been having service for my cellphones with Verizon for over 3 years, and did not have any major problems, so when I moved to my new place I thought it’s better to get the Fios, and have one bill for my all Verizon services. I went online and started to order my products online. During ordering, the chat session opened and I started chatting with the Customer Service Rep in order to get help through the process. When we were in the step that I could order the home phone plan, I saw the International World Plan, and I asked the lady to give me some information about this plan. I asked her that I want to call to my country and I mentioned my country’s name to her as well. I asked her that if this service is available for my country, and she said “Yes” you can call to over 100 countries with this service and she encouraged me to get the 300 minutes service. Since the plan sounded good to me I decided to get the 500 minutes instead of 300 min, and after I ordered my plan, I started calling overseas, and happy that I am paying less than the Phone cards with this plan. On March 26 I received my bill, and saw that Verizon charged me 142 $ for the less than 200 minutes that I called to my country, and there was a Letter “N” in front of each phone calls. I checked the guide to see what does “N” mean, and I saw that it said N means “Denoted calls are NOT listed in World Plan”. Well, thanks to the lady who gave me the wrong information while I was ordering my plan online, but she or the Verizon company is not that much lucky because I printed my chat session the day I ordered my plan since I wanted to have the information of what I actually had ordered. That time I did not think that I may get in trouble like this. Since March 27th, I have been calling Verizon every other day, and I have explained my issue to more than 10 Customer Service Reps, and each of them asked me to fax my chat session to them. I have been faxing that to all the numbers that they gave me, and I am keep faxing them, but do not get any respond. One of the Verizon’s Supervisors, whose name is Mark, called twice on my home phone number during the daytime, around 3 pm, and he left massages. On his second massage, he said that he checked the plan and my country is not listed in the International World Plan. He just said this, and he said that he was going to call me back, but never happened. He also did not leave me any phone number that I could call back. Also, since my cellphones are listed in the same bill as my other products, he could easily see the other numbers that he could call and reach me, but he did not bother himself to do so. I have even changed my home voice mail greeting addressing to Verizon, and left my cellphone number in voice mail greeting. I am so sorry that I have to say this, but this seems a definite fraud to me. I did not know about this plan, and I asked the Customer Service Rep to help me. She was responsible to check my country, or at least let me know how I could find out about the coverage. This is ridiculous, and if Verizon cannot take over this problem, my lawyer will take the action over, and takes the issue to their corporate court. I am not going to give up about this, and I decide to give Verizon about a week or so to solve this issue, but I won’t wait more than that. Just a friendly advice to people who want to get the home service through Verizon: DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service. There is nothing about taking care of customer in this company, and you are going to be stuck with what you get.

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Problem in updating the notes for the service request

Hi All,
I am passing the following parameters to update the notes to the service request but not successful.
Can anyone let me know the workable solution.
set text
    ls_text-ref_handle = 1.
    ls_text-ref_kind   = 'A'.
    ls_text-tdid       = 'S001'.
    ls_text-text_object = 'CRM_ORDERH'.
    ls_text-tdstyle    = 'SYSTEM'.
    ls_text-tdform     = 'SYSTEM'.
    ls_text-tdspras    = 'E'.
    ls_text-mode       = 'I'.
    lv_txt = 'Centre Update request for:'.
    ls_lines-tdformat = '*'.
    ls_lines-tdline = lv_txt.
    append ls_lines to lt_lines.
    ls_text-lines   = lt_lines.
    append ls_text to lt_text.
clear ls_input_field.
ls_input_field-ref_handle = 1.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'TEXTS'.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'LINES'.
CLEAR ls_fieldname-changeable.
lv_logical_key = '1'.
concatenate 'CRM_ORDERH' lv_logical_key into lv_logical_key.
ls_input_field-logical_key = lv_logical_key.
INSERT ls_fieldname INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_field.

Hi Surya
Please, use this FM:
DATA: lv_textobject TYPE thead.
lv_textobject-tdid         = <TEXT ID>.
lv_textobject-tdname   = <GUID OF SERVICE REQUEST>.
lv_textobject-tdobject   = 'CRM_ORDERH'.
lv_textobject-tdspras   = sy-langu.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
      header          = lv_textobject
      savemode_direct = 'X'
"      insert          = 'X'
    TABLES
      lines           = lt_text.
Hope this helpful!

Intermittent errors - Invoke() could not find the Service name

Users are getting intermittent error : Invoke() could not find the Service name, when opening the Xcelsius dashboards in PRODUCTION. The dashboard has several QAAW queries .These errors are poping up intermittently.
The dashboards are hosted utside the BO environment.
BOXIR3.1
Crystal Xcelsius 2008 Enterprise

As I continue to look into it, the only thing that I see differently when I am prompted for login is that I can specify the system to log into. I am now wondering if somehow this information is being lost and that is what is causing these issues. Given that the specified name cannot be found and that it does in fact recognize the correct name, I'm not entirely sure what the problem is.
Further information:
If I disable the use of hard-coded logins and I am prompted, I can display results for the onLoad run. Yet the query is also set to refresh on 30 second intervals. On every subsequent interval I am getting this error.
I think this has something to do with sessions. How do I check which sessions exist on my box? CmcApp somewhere?
Edited by: Brian Comeau on Jun 4, 2009 12:24 AM
Checking in CmcApp I found some sessions. Here is what happens:
Login to CmcApp Sessions tab
-Administrator: 1 session at 5:45pm
Launch browser to Xcelsius .swf
Prompted for login information: Administrator/password
-Administrator: 2 sessions at 6:30pm
I had previously set the timeout for sessions in QaaWS to 120 seconds
After 2 minutes
-Administrator: 1 session at 5:45pm
Yet throughout this time, I am still given this "invoke() could not find the service name" error. The name provided "qaawsIncidents" is the same name that I can see if I launch QaaWS.
Ideas?
Edited by: Brian Comeau on Jun 4, 2009 12:30 AM

My system doesn not much the current uploaded software it shows on start up disk that i have mac os 1.8 where the system is asking for 1.77

my system doesn not much the current uploaded software it shows on start up disk that i have mac os 1.8 where the system is asking for 1.77. It doesn't allowe me to reinstal or access the drive>

I assume you don't have a backup on an external HD. You always should, because then you could easily fix your problem.
Boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
 Cheers, Tom

The system could not locate the EDI partner agreements

Hello all,
I am trying to setup the DESADV message in SAP, but I am having some problems.
1. I've created the LAVA output relationship via VV21 with that customer
2. I've created the relationship in WE20
2.1 Under the KU partner type, I've created the outbound parameters: SP -DESADV and SP -SHPMNT
2.2 In MESSAGE CONTROL option, I've added Application V2, Message type LAVA and Process code SD05 or SD11 depending on the message
But, when I try to add the LAVA message to the outbound's delivery header, I get an error message that says:
"The system could not locate the EDI partner agreements (outbound) for
partner 2.
You cannot use transmission medium 'EDI' with this partner."
Any help with this issue? thank you

Hi,
Just have few checks at your end as below:
1. go to WE20
2. select you customer
3. select outbound parameters
4. click on details {blue lens below}
5. in outbound options tab -- have you maintained the receiving port ? also in basic type - have you maintained the mesage type?
6. in message control tab - have you maintained appropriate entries ?
7. finally very much important check > hope you have not activated the TEST check box in the initial partner profile>outbound parameters>partner functions field...
Hrishi

I brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him,,

i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

System is not recording the Service details while doing recording of ML81N

Similar Messages

Maybe you are looking for