System Management: Application Monitoring

I am curious to hear how you all are managing your environment(s) and deployed
applications (especially from an operator's viewpoint.) Are you using just
EConsole or have you built a "Monitor" app that rides on top of various agents?
Thanks in advance!
Dustin

Hello Dhawanmayur,
SCOM 2012 R2 officially supports only Tomcat Web Servers.
You may give a try to
Application Insights SDK for Java instead.
Dmitry Matveev

Similar Messages

HT3964 Hi my MacBook is freezing whenever I try to open an application. I have tried resetting the system management controller, however no success. How can I wipe my hardrive and reinstall it again. PS: I no longer have the installation CDs,

Hi my MacBook is freezing whenever I try to open an application. I have tried resetting the system management controller, however no success. How can I wipe my hardrive and reinstall it again. PS: I no longer have the installation CDs, can I download it from Apple?

To get replacement installation disks, call Apple. Have the serial number of your MBP ready and a credit card. There is a fee.
Ciao.

Can I remove all but the last "Mac OS X Server certificate management" application password from my System Keychain?

I am slowly nursing a broken Montain Lion Server back to health. The problems started with a name change days ago then went sour, probably because of some stuff in the keychain that tripped the commands up.
I have now a trusted Root CA in my System Keychain which has signed my wildcard Certificate for my domain and all my services are protected by this wildcard certificate. Creating and installing that certificate helped me back (slowly) but there are still problems to solve
I also have set the com.apple.servermgrd identity preference to this (now trusted) wildcard certificate a few minutes ago
I am busy cleaning as much as possibe of junk from my Keychains to improve stability, of course without damaging things (I hope)
There are 19 "Mac OS X Server certificate management" application passwords in my System Keychain.
12 are from 9 days ago when I installed this clean OS X Mountain Lion Server for the first time, created within a minute during server install.
1 from 6 minutes later, maybe when I turned on a Service
2 are from that day, but 2 and 3 hours later (also probably because of something I did in Server.app, like enabling a service)
1 from 2 days later (probably when I tried to change the server name/domain)
1 from again 5 days later (probably when I tried to change the server name/domain again)
1 from yesterday, when I changed the servername
1 from today, when I changed the server name again.
What are these application passwords for and can I safely remove all but the last one? What are they for?

I went ahead and remove them a month ago. So far, there don't seem to be any issues. As long as you double-triple-check that the hash-number in those "Mac OS X Server certificate management" keychains _aren't_ in the filename of any of the *.pem files in the /etc/certificates folder, you can delete those orphan keychains.

No system manager locations set, search application might not be ready yet

Hi,
I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
ULS is writing this:
05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/ They are all installed on my server.
Search host controller service and SharePoint Server Search are started.
Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount] "Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
$sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
After this I do a server restart and continue with creating the search service and its components.
Any ideas?

I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
requirements?

What is System.Management.IdentifierChangedEventHandler?

hi
I'm collecting application informations provided by our own app through WMI using .NET 2.0 framework. The app do it every some seconds for about 20 computers. Now the problem is that the app crashed for OutOfMemoryException. Through crash dumps created by windbg tools, I found too many System.Management.IdentifierChangedEventHandler object.
The following are the output of windbg.
!dumpheap -stat
MT Count TotalSize Class Name
675835ec 998575 15977200 System.Management.PropertyDataCollection
67582c14 998594 15977504 System.Management.ConnectionOptions+EncryptedData
790fa3e0 379776 21847316 System.String
791036b0 998838 23972112 System.Collections.ArrayList
67583354 998594 27960632 System.Management.ManagementScope
67582c6c 1997171 39943420 System.Management.ManagementPath
67581f08 998597 47932656 System.Management.ManagementNamedValueCollection
67582b6c 998594 55921264 System.Management.ConnectionOptions
790fea70 998845 55935320 System.Collections.Hashtable
67581468 998576 59914560 System.Management.ManagementObject
791242ec 998847 143867280 System.Collections.Hashtable+bucket[]
67581fc4 5991514 191728448 System.Management.IdentifierChangedEventHandler
But I can't find any detail about this event handler from MSDN. Is there anyone caught by similar situation?
thanks a lot

Hi,
Based on this thread, this problem appears to be memory management issue.
http://bytes.com/topic/c-sharp/answers/542348-memory-management-problem
NOTE: You can use perfmon tool to monitor memory consumption.
Regards,
Gopi
www.jijitechnologies.com

Question about self defined Application monitoring object

Hi
I m trying to define my own monitoring objects, but what defined in the monitored system can not appear in solution manager(4.0). I have newest version of sap-a/pi , the ST-PI is 2005_1_700, any one can drop me some lines where coulde be the problem.
best regards

no one use self defined application monitoring?

Shared variables missing in distributed system manager

I have multiple shared variables in a library (.lvlib). These are all network-published shared variables. I can see the library in Distributed System Manager but not the variables in the library. When I look at the properties page in Share Variables Properties Dialog, aliasing is not enabled because the library is hosted on the same machine as the application.
I tried to run the Shared Variable Monitor application but was given a Runtime Error for TagMonitor.exe; "This application requested Runtime termination in an unusual way. Contact application support team."
I also tried undeploying and deploying the library as suggesting by KB 56PCQ3RR.
Why does Distributed System Manager see the shared variable library but not the shared variables in it?

Hello faustina,
Has there been any software or hardware changes on the application since the error occurred? Also I would recommend to format and reinstall the software on your Real-Time target, after this you can follow Matt’s recommendation to test this behavior with a new project and single shared variable.
Regards
Jose R

Application Monitoring

Hello all,
I would like to know if any of you have experience
creating Application Monitoring tools that would
monitor current application performance. An example
would be to monitor the number of messages in que for
a load balanced service (such as the database
manager).
Or has anyone integrated Forte with tools like Tivoli
to monitor Application Performance? I read over Geoff
Puterbaugh's documentation (very well written Geoff!)
on the Tivoli integration with Forte, but this is an
old document (circa 1996).
Any input is greatly appreciated!
Regards,
Travis Foote

I would be more interested in SNMP integration. Has anybody done any work
in this area and if so can you share some code. The Forte demo is too old
and would like some advice from some real work.
thanks
ka
-----Original Message-----
From: Daniel Nguyen [mailto:dnguyenclub-internet.fr]
Sent: Tuesday, January 16, 2001 5:43 PM
To: travis foote
Cc: forte-userslists.xpedior.com
Subject: Re: (forte-users) Application Monitoring
Hi,
You can monitor the agents of Forte. DS Data Systems did a product called DS
Daemon I think which does that.
You can also develop your own instruments for performances. You can find a
library on http://perso.club-internet.fr/dnguyen/
If you want to integrate your application with Tivoli the easiest way is to
feed a file during your exception treatment. The Tivoli agent will make some
pooling on the file en send messages to the console.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
travis foote a écrit:
Hello all,
I would like to know if any of you have experience
creating Application Monitoring tools that would
monitor current application performance. An example
would be to monitor the number of messages in que for
a load balanced service (such as the database
manager).
Or has anyone integrated Forte with tools like Tivoli
to monitor Application Performance? I read over Geoff
Puterbaugh's documentation (very well written Geoff!)
on the Tivoli integration with Forte, but this is an
old document (circa 1996).
Any input is greatly appreciated!
Regards,
Travis Foote
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

New to System Manager - Advise needed on my requirements

Hi there!
I am very new to System Manager 2012, so I am seeking advise on how to best start my project. I read the initial part of the Getting Started guide ( http://technet.microsoft.com/library/dn235548.aspx ), but System Manager is a big product so I need
to double check the direction I should take, based on my design requirements.
So here is what I am trying to achieve in two bullet points:
- I got my own monitoring system application that I can query via an API. The API is REST based (i.e. HTTP GET/POST operations) and I already wrote a Python script to query my API so I can export data and alerts from it.
- I'd like to integrate the data/alerts coming from my own monitoring application into the Microsoft System center.
Questions:
1) in the first page of the Getting Started guide, I can see I am offered the option to download several evaluation virtual hard disks (e.g. App Controller, Operation Manager, Service Manager, Orchestrator, Virtual Machine Manager). Not sure which one I
should use for what I am trying to achieve?
2) depending on the component picked in point (1), what's the best documentation link to start studying how the Microsoft application works, and how to integrate the data coming from my API?
3) is my Python script fine to run on the Microsoft Virtual Machine, in order to query my API and pass the data to the System Manager 2012?
Thanks in advance for your help, and looking forward to actively join your community!
Wally

The system center suite contains several products.
For monitoring purposes you should look into the Operations Manager product.
Have a look here for details on OpsMgr:
http://technet.microsoft.com/en-us/library/hh509025.aspx.
These forums are specifically for Configuration Manager.
Tim | Blog |
@Tim_DK

MVC model in Web systems and applications

MVC model in Web systems and applications
Object-oriented design model is experience, MVC idea is a user interface for the original. This article discusses how the major application areas in the new Web design patterns and the use of MVC framework. The article first introduced the concept of design patterns and characteristics, and MVC architecture design concepts and analysis of the MVC framework contains several key models. Based on the characteristics of Web applications on how to use patterns and MVC framework made some design ideas.??
1. Introduction
1.1 design model
Object-oriented technology and the emergence of software applications has greatly enhanced the trusted and software quality. Object-oriented programming than previous models to various programming simple and efficient, but the object-oriented design methodology than the previous design methods to complex and much more skill, a good design should be both on the issue of gender, but also to take full account of the problems and needs sufficient interoperability. In the past 10 years, people in the object-oriented technology and the practical application of research to explore certain issues in relation to the creation of a number of good solutions, the so-called object-oriented design patterns. Object-oriented technology is one of the purposes of enhancing the software trusted, and to design model, design programmes in important positions from a deeper sense of meaning and essence embodies trusted. There are many people in the design model definition, which cited Christopher Alexander is the largest design model definition : Each design model is a tripartite rule, which expresses a contextual environment (Context), a problem and a solution. Design models generally following basic elements : model name, the purpose solution effect 1995-1998 code and related design models. There are several classifications design patterns can be divided into a model based on the purpose (Creational), structural type (Structural) and the type of behaviour (Behavioral) three. It is mainly used in the creation of a model-based object model-based structure to deal primarily with the category or combination of objects, used to describe behavior-based model is the main target for the category or how stress and how to allocate responsibilities. Design patterns can be divided into categories based on the scope and target mode model type model dealing with the relationship between the categories and sub-categories, these relations through the establishment of succession in Translation moment to be finalized, are static. Model is targeted at addressing the relationship between the moment of change these relations in the operation, more dynamic. Model features : through the experience acquired in a structured format to write down, avoid encountering the same problems on the first design, exist in different abstract level, in continuous improvement, can be trusted artificial product for the design and best practice in the world to be combined to address larger issues.
1.2 MVC framework
MVC was first used in a user interface Smalltalk-80 China. M representative models Model, representatives maps View V, C representatives controller Controller. MVC trusted code with the aim of increasing the rate of data reduction expressed, the data describing the operation and application coupled degrees. Also makes software Keweihuxing, restorative, expansionary, flexibility and packaging of greatly enhanced. Single-user applications are usually incident-driven user interface to the organizational structure. Staff development tool with an interface painting of a user interface interface code based on user input and then prepare to implement the corresponding moves, many interactive development environment encouraged to do so, because it emphasizes first and then a functional interface. Some software design model is the strategy that will be fixed before the code into the regular system of the final. Result is that the procedures and organizations around the user interface elements in the user interface elements of those moves, data storage, applications and functions of the code is used to indicate the way intertwined. In single-user system code structure can be so, because the system will not demand frequent changes. But for a large system such as large Web systems, or e-commerce systems to be applied. Model by incorporating data from a variety of access and control data can be separated to improve distributed system design. MVC design pattern is composed of three parts. Model is the application object, no user interface. Type in the screen showing that it represents the flow of data users. Controller user interface definition response to user input, the users responsible for the action against the Model into operation. Model View data updated to reflect the adoption of data changes.
2. MVC design pattern,
An MVC framework for the design of the system includes many models, but with MVC is most closely related to the following three models : Observer, Cambridge and Strategy.
2.1 Observer models
MVC through the use of purchase / notification form and the separation of the Model View. View to ensure that their content accurately reflected Model and state. Once Model content changes, there must be a mechanism to allow notification to the relevant Model View, View can be made relevant at the appropriate time updating of data. This design is also more general problems can be solved, the target separation, making a change to the target audience affect others, which targets those who do not know the details of the object being affected. This is described as Observer in the design model. Model type : Observer model is the object-oriented model, it is behaviour-based model. Model purposes : definition of hierarchical dependence relations between objects, or when a target value of the state change, all its dependent relationship with the object are notified and automatically updated. There are a variety of data may show a way, in different ways and may also show. When a way through a changed data, then the other should be able to show immediately that the data change and do accordingly.
Effect :
1. Abstract coupling. I only know that it has a target audience of some observers, the observers met each abstract Observer category simple interface, does not know their specific affiliation categories. This makes the coupling between goals and observers smallest and abstract.
2. Support radio communications. Needless to notify designated observers goals, how to deal with the observer informed decisions.
3. Possible accidents updated. We update logic, avoiding mistakes updated.
2.2 Faculty model
MVC is an important feature of View can nest. Nest can be used for any type of combination of local maps available, but also management of type nest. This thinking reflects the type and mix of components will be equal treatment design. This object-oriented design ideas in the area of Cambridge has been described as a design model. Model types : Cambridge model is the object-oriented model, it is also the structure type model. Model purpose : to target portfolio into tree structures to express "part-whole" level structure. Prepared for the use and combination of individual target audiences with the use of consistency.
Effect :
1. Definition of a target portfolio includes simple objects and the structure of the category level. Simple objects may be complex combinations of objects, and can be targeted portfolio mix. This customer-code used in the target areas can use simple combinations target.
2. Simplify customer-code. Needless to know their customers - a mix of target audiences is a simple target or can use these items in a consistent manner.
3. Easier to add new types of components. New components can easily be changed to a combination of customer-targeted codes.
2.3 Strategy model
Another important characteristic is the MVC can not change the View of changes View response to user input. This often requires a change in response to the logic of the system is very important. MVC to respond to the logic involved in the Controller. Controller of a category level structure could easily change to the original Controller appropriate, a new Controller. View Controller son used to achieve a specific example of such a response strategy. To achieve different response strategy, as long as examples of the use of different types of replacement will Controller. Also in the running time by changing the View Controller for users to change View of response strategies. This View-Controller relationship was described as an example of Strategy design pattern. Model types : Strategy model is the object-oriented model, it is behaviour-based model. Model purposes : definition of a series of algorithms, and their packaging, and ensure that they can replace each other, making algorithms can independently use its customer-change.
Effect :
1. Strategy category levels for Context definition of the relevant algorithms can be trusted or behaviour.
2. Alternative methods of succession. If the direct successor Context, with different acts will be added Context act, the realization of which would algorithm mixed up with Context, Context hard to preserve and expand, but can not dynamically changing algorithms. Will be enclosed in a separate Strategy category algorithms to enable algorithm independent Context change easily cut over expansion.
3. Can provide the same acts different date.
4. Strategy-must understand what customers between different.
5. Context and Strategy communications between costs.
6. An increase in the number of targets.
3. MVC in Web application system
Now some of the distributed systems such as Web-based B2B e-commerce system, suitable for use MVC framework. Through analysis from the perspective of high-level applications can be a target divided into three categories. Category is shown for the target audience consists of a group of commercial rules and data, there is a category that is receiving requests to control commercial target to complete the request. These applications often need to change is shown, such as web style, color, but also need to demonstrate the contents of the display. And the business rules and data to be relatively stable. Therefore, said that the frequent need to change the View objects that the business rules and data model to be relatively stable target, and that the control of the Controller is the most stable. When the system is usually issued after the View objects by artists, designers or HTML/JSP system managers to manage. Controller target applications development personnel from the development and implementation of rules for commercial and business development personnel from the target data, database managers and experts in the field of common completed. Show in Web?? or customers - control logic can be Servlet or JSP, dynamically generated Html. Generally used Servlet better than using JSP. JSP will be better with the Html code of separate codes for page designers and developers of separation efficiency. Servlet and JSP can complete all complete functions, actually JSP eventually converted into a Servlet. And control of the target system exists in every level, the coordination of cross-layer moves. Contain business rules and data objects exist in the EJB layer (EJB-centred model) or Web?? (Web-centred model).
3.1 View in the Web application system
View of the system shows that it fully exist in Web??. General by JSP, Java Bean and Custom Tag. JSP can generate dynamic web content using Java Custom Tag easier Bean, but it can show the logic of packaging, and more conducive to modular trusted. Some well-designed in a number of JSP Custom Tag can even be used in different system duplication. Model for control of JSP and Java Bean objects. JSP through Java Bean objects to retrieve the data model, the Model and Controller object is responsible for updating the data on Java Bean. In general, can we devise all possible screen that users can see all the elements of the system. Based on these elements, to identify the public part of passive components and dynamics. Can consider the use of templates means to separate the content generated JSP public, also need to change their generation Html or JSP from a JSP templates to dynamically introduce these different parts (include methods). Another issue to consider is screen option, when dealing with End users request template automatically available to show that the concern that users must know what is the screen components. So can consider all screens on the definition of a centralized document, such as a document or text document java. Taking into account the possibility of changes in future document definition screens, the best use of text documents such as a XML document, so future changes to the recompilation. According to the URL and user input parameters to shine upon the results of a screen, of course, likely to be made on the basis of the outcome of the implementation of actions to choose different results screen. Therefore, the need for a request for matching resources with document (XML), if a URL request several different results, it must specify in the document need to control the flow (a controller object), as well as the corresponding screen different flows.
3.2 Model in the Web application system
Model objects represent business rules and business data exist in EJB layer and Web??. In J2EE norms, the system needs some data stored in the database, such as user account information (account model), the company's data (company model), some not recorded in the database. If a user browsing the current catalogue (catalog model), the contents of his shopping (shopping cart model). Which one of these models exist in the data according to their life cycle and scope to decide. In Web?? a HttpSession and ServletContext and Java Bean objects to store data in the EJB layer is a data storage and logic EJB to. Web?? the Java Bean objects stored in the model layer model of the EJB object data copy. Because there are many different EJB tier model targets, so Web?? through a ModelManager to control the EJB layer object model in ModelManger background model can be used for packaging methods. In the EJB layer and the rules have all the data into EJB model is inappropriate. If the database can visit the Dao object model into objects. Dao can be encapsulated and the specific details of the database in the world, if we can write a different table, a number of databases, or even multiple databases. If the orders can be a model for OrderDAO, it may have to deal with Order table, table and OrderItemLines OrderStatus table. Value can also consider the use of targets. Value can be a target of securing long-range targets, because every time the remote object attributes could be a long-range redeployment process will consume network resources. EJB objects in the distance can be used instead target. In the distance, one-time items to be targeted instead of the value of all attributes.
3.3 Controller in Web application system
Coordination with the Model View Controller object to the request of users into the system to identify incidents. In Web?? generally a MainServlet (or Main.jsp), and receiving all requests, it can use screen flow management devices (ScreenFlowManger) decided next screen. There is a general request processors RequestProcessor contains all requests are needed to be done to deal with logic, such as the request translated into system events (RequestToEvent). Acting processors usually also includes a request for ClientControlWebImpl, it is logical to deal with the EJB layer in Web?? Acting. In EJB layer, a layer for EJB tier Web ClientController provide the CD visit. Another StateMachine used to create and delete ejb handle Web?? sent to the incident. Controller Another important function is synchronous View and Model data. ModelManger contained in a ModelUpdateManger, it puts events into a Model System assembly that all the needs of synchronous Model, and then notify Listeners do synchronous operation.
4. Concluding remarks
In recent years, with the Internet technology development and the emergence of new business models, the Web is based on a large number of applications. On how to design these systems architecture, and gradually there has been some convergence of opinion, the most important point is that its structure should be rational in the open. Demand than ever faster development of technology and design concepts, systems for the future, the cost of upgrading the smallest, research software systems architecture still very useful and necessary.

Bravo. And your point is?

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

How do I install individual driver of Killer LAN without its Network Management application?

I found sometimes the Network Management application would conflict with other online application, and in other forum an user provided a pure driver package that can solve the problem.
Here is the steps:
First you can download MSI pure Killer LAN driver from this link:
http://pan.baidu.com/s/1mgwZs96
Please uninstall old Killer LAN driver package from control panel if you already have the driver in OS.
Download and extract the RAR file to windows desktop. Double click “dpinst.exe” to install the killer driver.
It is normal if you see the message of “No device for update present” in the last step, that’ s because the driver package includes all kinds of killer LAN chip drivers, some don’t exist in your system.
Just click “Finish” to complete the driver installation. Restart system and you can start to enjoy the web surfing.
And if you encounter problem when you uninstall Killer LAN driver, you can use Killer official uninstall utility to completely remove the driver.
32 bit:
https://www.qca.qualcomm.com/drivers/KillerCleaner_32bit.exe
64 bit:
https://www.qca.qualcomm.com/drivers/KillerCleaner_64bit.exe

Just install the Killer LAN driver from MSI website, the manager is always installed with the driver.

Where I can find and use "Java Desktop System Management Tools "

With Solaris 10, you not only get the Java Desktop System desktop environment, but also the Java Desktop System Management Tools and a selection of free and trial Development Tools, which are available for download only.
I found only an information about JDS release 2
but today it's release 3 already and it's said it already integrated in JDS
and above sentence it state that it already come with solaris 10?
where i can find that , where i can use it
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpduj?a=view
this page said how to install but ...where I can find CD/
regards please help

Good question. It appears to have been installed with Solaris 11/06, as I have all of the packages listed here:
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpdus?a=view
However, it does not appear in the Java Web Console. I tried adding it using the wcadmin command, but haven't managed to get it to run as per the docs. The documentation assumes that it is already installed and visible in the Java Web Console...
According to this documentation:
http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l6?a=view#gdjpi
An application for the Java Web Console should have a WEB-INF directory and an app.xml file. The apoc packages come with neither, so something is missing.

How to install forms 6i runtime using windows Systems Management Server?

Hi,
Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
How to install oracle forms 6i and reports 6i runtime in multiple client machines
using windows systems management server instead of installing one by one manually.
Regards

Here is a quick summary on why this works...
The Problem:
The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

Business process monitoring - application monitor

Hi guys
Perhaps you can assist. I have setup a application monitor on SD Invoices AR , sales invoices not posted to FI . It is setup for one sales org and one distribution channel. It picks up 3 documents. The monitor runs at night . When I however pull the detailed report for the 3 billing docs, it takes about half an hour to run ? I have tried filling in more information eg billing type etc but there is no difference.
My other monitor - sales documents, orders GI date in past not delivered works fine, with quick response on the detail reported for exactly the same sales org and distribution channel . (176 documents ) . 1 minute.
What could be the reason for my invoices AR monitor taking so long to give me the detailed info ?
Thanks in advance

Hello,
you cannot compare the performance of different key figures with each other as every key figure consists of one or more SQL statements of different complexity.
The Sales Orders with GI date in the past are first selected via index table VEPVG which is usually very quick and later on the big application tables are selected like VBUK. As long as the backlog is moderate the key figure is very quick.
For the invoices not trasferred to FI the main select is on table VBRK. With your retail business you have problem millions of entries in this table. The quesion is if an index on VBRK exists in your system that could support a fast query. And then you have to fill selection criteria according to the index needs.
If you don't come to a conclusion there, please open an OSS ticket on component SV-SMG-MON-BPM and we will see if we can provide an SAP note improving the performance for this key figure according to your specific needs.
Best Regards
Volker

System Management: Application Monitoring

Similar Messages

Maybe you are looking for