System message setting for delivery.

Hi All,
I need to set message VL 261 Free goods group not complete as error message. I tried to do this setting at LE> shipping> system modification-->specify characteristic for system message.
But when i am enter error message number 261 it is giving error " enter valid value". But when I am creating delivery I can see that message in log as information. can any one help on this.
Thanks in advance.
Regards
Chetan

Hi Chetan,
for my understanding you can not switch "VL 261 Free goods group not complete as error message". If you look at the SAP customizing help you will see following information:
"The maximum possible message category is predefined by SAP. For this reason some error messages only have a limited selection of message catogories that can be set. Use F4 Help to find the maximum possible message category from the sequence 'E', 'W', 'I', ' '."
That means the message types predefined in customizing can be switched from error to warning and vice versa. BUT error messages not included can not be added or switched by customizing.

Similar Messages

NotificationServiceFault - Message accepted for delivery

This is a bit of a strange one ...
I have one BPEL process set up for exception handling and error notification via email and it is working fine. I then went to another "like" type process and setup the same thing. The notification throws a fault but the message is "Message accepted for delivery" ... but the message does not arrive ... this seems odd .. Has anyone else ever had this problem with the notification system.
InvokeNotificationService (faulted)
[2006/06/05 12:41:52] "{http://xmlns.oracle.com/ias/pcbpel/NotificationService}NotificationServiceFault" has been thrown. less
<NotificationServiceFault>
<part name="faultInfo" >
<faultInfo>250 2.0.0 k551tgn15962 Message accepted for delivery </faultInfo>
</part>
</NotificationServiceFault>

We have had intermittent issues with invoking the notification service, I have not looked further on the server (appserver 10.1.2.0.2 on Solaris) where the e-mail is sent to try and track down the issue. Instead we put a loop around the invoke notification and retry for a configurable number of times incase a fault is thrown (not ideal and adds to the overall code needed). It seems after the fault is thrown the next time it will invoke with no troubles.

Exchange 2010 - PerfMon - Messages Queued for Delivery = 2,147,483,649

Our monitoring system is alerting Messages Queued for Delivery as 2 Billion messages and the value returned by PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery also matches this number during some samples.
I was wondering, what's going on here. When checking queues using Get-Queue cmdlet it doesn't show more than couple of messages in the queue.
How do I get this fixed? This seems to be a known issue from thread http://social.technet.microsoft.com/Forums/en-US/ac121f02-4359-4d18-b86a-9c9c78b320a9/perfmon-messages-queued-for-delivery-2147483764?forum=exchange2010
Any assistance would be greatly appreciated.

Hi ChaituNanl,
Thank you for your question.
By our search, I suggest we update Exchange to Exchange 2010 CU6 or later, because problem also seem to appear to Exchange CU5 or former.
We could download the CU by the following link:
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
Notice: please note the version of Exchange Service Pack
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Seeking definition of "Message accepted for delivery"

In Exchange 2010 I have a situation where if I send a message to both internal and external recipients, the external recipients only receive the message if I turn Sophos PureMessage off. However, in both
successful attempts and failed attempts the last record in my Exchange Message Tracking Logs is identical, as follows:
EVENTID = SEND
SOURCE = SMTP
SOURCECONTEXT = "...Message accepted for delivery"
That leads to my wondering what exactly that log entry means?
For example, it could mean "Sending server will attempt to deliver message"
or it could mean "Sending server has attempted to deliver message"
or it could mean "Receiving server has accepted message"
or it could means something else. If you know *for sure*, can you please reply? Please don't guess what it means. Also, if you respond, please don't use the word "server" in your response without explicitly stating which server
you mean (eg "sending server" or "receiving server").
If it turns out that log record does NOT indicate the receiving server accepted the message, can anyone tell me how I can be sure the receiving server has accepted the message?
Thank you very much!

If it turns out that log record does NOT indicate the receiving server accepted the message, can anyone tell me how I can be sure the receiving server has accepted the message?
Hi,
You can try to enable the NDR. If the recipient's mailbox doesn't receive this email, it will return NDR to the sender.
Also try to configure Get delivery and read receipt confirmations. More details to see:
https://support.office.microsoft.com/en-us/article/Get-delivery-and-read-receipt-confirmations-a34bf70a-4c2c-4461-b2a1-12e4a7a92141?CorrelationId=f2166a89-93d0-4137-8268-601b7aa337cc&ui=en-US&rs=en-US&ad=US
Thanks
Mavis Huang
TechNet Community Support

PerfMon - Messages Queued for Delivery = 2,147,483,764

Environment - Exchange 2010, DAG 2 X Server 2008 R2.
Hi there, we have noticed that a monitor is reporting there are 2,147,483,764 messages queued for delivery when running this powershell command: get-wmiobject -query "select MessagesQueuedForDelivery from Win32_PerfFormattedData_MSExchangeTransportQueues_MSExchangeTransportQueues"
The value returned by this also matches what we see in the PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery. the number does not increment as messages are sent, in fact it's only showing 2 more today than it was yesterday.
We are wondering just whats going on here, when checking queues in the GUI there are only a couple of messages showing up.
Is this counter just broken? If so how could we fix it?
Thanks for any assistance, regards Peter.

Hi,
According to your description, it seems that the value is the total number of messages that were queued for delivery since server started.
I recommend you refer to the following article:
http://pic.dhe.ibm.com/infocenter/tivihelp/v30r1/index.jsp?topic=%2Fcom.ibm.itmmc.doc%2Fmain_xc85.htm
Messages Queued For Delivery
The number of messages queued to be delivered when sample was taken. The value
format is a 4-byte integer.
Messages Queued For Delivery/sec The rate messages are queued for delivery since the server
was started per second. The value format is a decimal.
Messages Queued For Delivery Total
The total number of messages that were queued for delivery since
server started. The value format is a 4-byte integer.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Sun Java System Messaging Server for Windows xp

Hi,
We are in a project that uses Sun Java System Messaging Server on Windows xp platform. But we didn't find the software download.
Please tell how can i have that software?

Messaging Server 6.x has never been released for Windows. A windows release is projected for the future, but that may be months away.
Messaing 6.1 is available NOW for Redhat Linux AS2.1 u2 and Solaris X86. I have installed both, and find them both good.

Overiding system message pages for double opt-in

OK I am wondering if this is possible I have searched and found no info on it but I jus tight be searching the wrong keywords.
I want to amend the way the system messages are working for an email marketing double opt-in process.
Right now an email is being issued to the user that subscribes and they click the link to confirm their email. This link takes the user to the system page 'Subscription Confirmation Request'. From there they click the link and they are sent to another system page called 'Subscription Confirmed'.
Firstly can I nominate my own page from the email instead of using the 'Subscription Confirmation Request'? Can I amend this tag in the email: {tag_verificationurl}
Secondly if I cannot amend the frist step can I redirect the second confirmation page to go to my own page instead of going to 'Confirmation Request'? Can I amend this tag: {tag_confirmation_form,Confirm}
Logically I could simply customise these 2 pages but the problem is it means any subscriptions to anything on the site will also see these pages so it does not work when more than one subscription process is required.
Assitance appreciated.

Hi Matthew,
The only option I can think of will require to bypass the opt-in process which the system will automatically opt-in subscribers. Which you can then have the subscription form perhaps just redirect elsewhere.
http://kb.worldsecuresystems.com/178/bc_1787.html (Bypass double opt-in)
Unfortunately if needing to use the opt-in process the steps cannot be further customized which I think you may be after at this stage.
Kind regards,
-Sidney

Message control for delivery

Hi all,
I want to configure the outbound delivery to create an output record whenever the doc is changed (VL02N),
I've defined a new output type, added it to the determination procedure, set the dispatch time to 4, but it only creates an output record after running VL01N.
should I define the requirement(write an FM) for this ?
or what other step I need?
Thanks

Take a look at the output condition type to see if multiple issuing is checked.
General tab on the output condtion type.
Multiple issuing of output
Indicates whether the same output may be issued to the same partner more than once.
Example
For example, if you add an order item to a sales order for which the order confirmation was already sent, you will want to send a changed output to the same customer.

System wide setting for View Options

I like to view documents/folders in Name order, this is simple to do via the View Options menu and select Name for the particular folder you are viewing at the time, there must be a way to set this parameter for the whole system, but i can't find it ...... anyone ??
Thx
John

John,
Open up a finder windows and 'right' click, selecting 'Show View Options'. You can change all your defaults which should change subsequent folder options. Just change arrange by to what you want and click 'Use as Default' on the bottom.

Newest iTunes is overriding System Preference setting for appearance!

I have my appearances set to graphite (as opposed to blue). That is, my scroll bars, check boxes, apple logos etc. are all showing up in graphite and not blue. Unfortunately, after downloading and installing the newest update to iTunes, whenever that program is open, the appearances switch to blue. How to I get this override to stop??
Thanks for your help...

Modifying the user template is not supported. You can Google for people who have done it in the past. I would recommend going to official route, if possible. Here are a couple of training documents. I'm sure there is more available though more official channels.
http://training.apple.com/pdf/wp_osx_configuration_profiles_ml.pdf
https://www.apple.com/education/docs/l521219b_osx_deployment_guide_030513.pdf
http://training.apple.com/pdf/wp_integrating_active_directory_mav.pdf

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

Setting for J2EE server do not exist

Hi,
I have prepared a web service from a FM.
I can't test it from the WSADMIN since this system is not integrated to a J2EE server. So I get the error message "Setting for J2EE server do not exist"
I am able to generate the WSDL file from Tcode WSADMIN
How can I test this web service from a browser with a J2EE server? If browser not possible then how can I test this web service.
Thank you,
Sam

Hi Sam,
I am not sure if you can test the web services without a J2EE server. For
testing in wsadmin, you do not need the system to be integrated with a J2EE server. Only the details of any J2EE server in the landscape can be given in
wsadmin -> Goto -> Administration Settings .
Regards
Srikishan

System Message no. M8249

hi,
pls let me know wer i can find this message number setting to control the message setting for error or warning message...this is a Message no. poped up wen u try to post invoice without tax code.....
regards
sachin

Hi
SPRO - Materials management - Logistics invoice verification - Define attributes of system messages
regards,
senthil.

Define system message attributes

Dear All,
How can i define system message attributes for master data , purchase recquisation configuration & many more (MM) pls give me in detail configuration part points must be rewarded
Amin

Hi Amin,
To setup the system messages like Warning, Error you can go through like this,
For Master data ---
SPRO-- Log GenMaterial master-Basic settings -- Define attributes for system messages
For Purchasing---
SPROMMPurchasing--Environment data --Define attributes for system messages
For Inventory mgmt & Physical inventory--
SPROMMInv mgmt & physical inv--Define attributes for system messages
For Logistics Invoice verification---
SPROMMLogistics Invoice verification--Define attributes for system messages
For external sevices mgmt---
SPROMMExternal services mgmt--Define attributes for system messages
Hope you understand this.
rgds
Chidanand

"you need to restart your system" message

Hi
I need some serious help here....It all started a while after installing 10.4.8. At first the system would just crash randomly, i.e. I'd get the spinning ball but I couldn't trace it back to any specific task, it was either when reading from my external drive, or listening to music or reading my mail.
First thing I did was to take out the 256 MB memory module I had together with my 1GB one, because I know that could cause some problems. But it did nothing. After a verify disk, I got an "Invalid sibling link" thing which I read was quite serious, so what I did was backed up everything and re-installed the whole system deleting the hard disk.
Soon after install (10.4.8 again) I had a huge problem with my external drive: it would hang for no apparent problem when I was trying to copy files from it back to the hard disk...Especially big chunks of files, like the Itunes music library. The thing is that sometimes if I tried again say three times in the end it would copy the files, so there was nothing corrupted with a single file. From a Verify disk thing my Lacie external drive was fine. I read a post about problems with the power adaptor so what I did was plug it into another socket and after that it seemed to be working ok. Now that I copied everything back, I get the "you need o restart your system" message, again for no apparent reason. I was trying to back up my Itunes library to DVD (seeing that Lacie drives are not that reliable after all), and when I got back to the MAC, the screen saver was on, when I moved the mouse, the screen went grey and the message came up. The DVD was fine, it was just waiting for another one. Same thing the second time. Another time I was just doing ordinary things...so I really can't understand what the problem is.
I ran hardware test: fine
Verify disk: fine
Repair disk permissions: ok
I disconnected all external peripherals: I got the "you need to restart" message after burning to Itunes anyway
I really don't know what to do to understand where the problem lies... ANYONE COULD HELP PLEASE?
I'm desperate.
Thanks
iMacG5 17" Mac OS X (10.4.8) AEBS-Airport Express-BT-Superdrive-Lacie 160 USB2.0 Drive

Hi subsonic,
These articles might help:
Mac OS X: What Is a Kernel Panic?
Mac OS X: How to Log a Kernel Panic
Kernel Panics? Don't panic too!
Mac OS X Kernel Panic FAQ
If this answered your question please consider granting some stars: Why reward points?

System message setting for delivery.

Similar Messages

Maybe you are looking for