System preference : engery don't function, system preference : engery don't function

Hey,
i have 2 big problems with lion:
Nr. 1 : the part "save energy" in the system preferences don't function ! When i want to open it it crash and the preferences stopp and i have to "quit it directly"
Nr. 2 : I can't send my MacBook Pro in the off state , it's in a way between on and off and i have to push longer onto the on / off button to quit the Macbook !
Are there others , they have the same Problems ?
Bastian

Here's code I use so I don't need to worry if it's an incomming post or get.
// Override
public void doGet (HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
{handleRequest(req, res);
// Override
public void doPost (HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
{handleRequest(req, res);
// Gets and Posts come here
public synchronized void handleRequest (HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
{// process here
}

Similar Messages

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

  • HT5527 i am unable to find icloud in my system preferences. What do i do? I don't have time to get to apple until next week and now im going to lose a bunch of data bc i can't update my icloud starage.

    i am unable to find icloud in my system preferences. What do i do? I don't have time to get to apple until next week and now im going to lose a bunch of data bc i can't update my icloud starage.

    You say you have iOS6: you can perfectly well pay to extend your free storage as an ex-MobileMe subscriber.
    If you wish to continue your current storage level, the instructions are here:
    http://support.apple.com/kb/HT5527
    Scroll down to 'How do I purchase my current plan?' and expand the section applicable to iOS.

  • Move System Preferences Help file back into System Preferences folder?

    How do I move System Preferences Help file back into System Preferences folder.  I unintentionally moved it.  My Mac blocks putting it back.  Suggestions?  Thanks!

    Somehow I managed to delete my System Preferences shortly after upgrading, and was able to use the 10.4 one for a while until I applied the patch. Luckily, I already had Pacifist, and with your directions I was able to get close enough so that I could find the Applications folder within the ContentsofEssentialsSystemSoftwareGroup > ContentsofEssentials.pkg > Applications > SystemPreferences.app.
    For that, I owe you the deepest gratitude and a gigantic THANK YOU. My System Preferences is now fully reinstalled and working wonderfully.
    Pacifist might actually be worth purchasing.

  • After updating with Security Update 2010-001, Quicken will not auto update.  Auto update function in Preferences are also inop.  Numerous posts in Macbook discussions about similar problems with other apps.

    Installed Security Update 2012-001.  Now Quicken will not auto save and the auto save function in Preferences cannot be changed. There are numerous similar comments in the Macbook discussions about other apps.   Come on, Apple, we need some help out here!

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Can't Open Server Manager - don't have System Administrator Rights

    Hi,
    I am new to BPC
    After i updated the support patch to BPC 7.5 MS  SP3 ,  pack level 2
    and Restart the server
    Then Server Manager can't open again.
    Error Message :
    This ID (xxxxxx)  don't have System Administrator Rights; you must log on with a user ID that has system administrator  privileges
    But I have logon the user which is used to install BPC 
    I have try to restart the service, but it is not working .
    Any method reset it ?  or solve it?
    thx
    John

    Dear Kong Chong Shun,
    From your information, I'm sorry I could not get several information. Did you upgrade your BPC Clients too, lets say BPC Administrators ?.
    Kind Regards,
    Wandi Sutandi

  • Hey I'm a novice on computers, but i've just done a full system restore on my laptop after backing it up on an external hard-drive long story short in the back up process all my itunes converted to mpeg4 files and now i can't get them back into my my libr

    Hey I'm a novice on computers but i've just done a full system restore on my laptop and put it back to factory spec, obviously i backed up all the data on an external hard-drive but when i have re-installed itunes and gone to import all my old music files from my previous itunes library as mpeg4 files it keeps telling me i don't have permission??!! *** someone please explain or tell me how to get music on to my new itunes without having to re-import every cd i own which is alot!!!

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • I just had my old operating system reinstalled, and i can't save pages documents, don't know how to install word

    i just had my old operating system reinstalled after a breakdown, and now i can't save pages documents. i don't know how to install word.

    What was your old system?
    What is your new System?
    What version of Pages?
    How did you install it?
    I don't know if you can see what's on my screen, but I definitely can't see what's on yours.
    To Install Word, buy it and follow the instructions.
    Peter

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • SQL CLR Table-Valued Function System.NullReferenceException

    Good day.
    I wrote a clr table-valued function that gets the data from the sharepoint list using the client model.
    Sometimes I get exception (When I calling this function I get 90000 rows and then I get this exception...):
    Msg 6260, Level 16, State 1, Line 1
    An error occurred while getting new row from user defined Table Valued Function :
    System.NullReferenceException: Object reference not set to an instance of an object. System.NullReferenceException: v at SDS.FillRow(Object obj, SqlInt32& month, SqlString& datePlanSalary, SqlString& dilerCode, SqlString& dilerName, SqlString&
    model, SqlInt32& countSalary).
    How can I fix this issue?
    My Code:
    public class SDS
    [SqlFunction(SystemDataAccess = SystemDataAccessKind.Read, FillRowMethodName = "FillRow")]
    public static IEnumerable SDSItems(SqlString url, SqlString listName)
    ClientContext context = new ClientContext(url.ToString());
    List list = context.Web.Lists.GetByTitle(listName.ToString());
    CamlQuery query = new CamlQuery();
    query.ViewXml = "<View/>";
    ListItemCollection listItems = list.GetItems(query);
    context.Load(list);
    context.Load(listItems);
    context.ExecuteQuery();
    return listItems;
    public static void FillRow(
    object obj,
    out SqlInt32 month,
    out SqlString datePlanSalary,
    out SqlString dilerCode,
    out SqlString dilerName,
    out SqlString model,
    out SqlInt32 countSalary
    item = (ListItem)obj;
    month = Convert.ToInt32(item["_x041c__x0435__x0441__x044f__x04"]);
    datePlanSalary = Convert.ToString(item["_x0414__x0430__x0442__x0430__x000"]);
    dilerCode = Convert.ToString(item["_x041a__x043e__x0434__x0020__x04"]);
    dilerName = Convert.ToString(item["_x041d__x0430__x0437__x0432__x04"]);
    model = ((FieldLookupValue)item["_x041c__x043e__x0434__x0435__x04"]).LookupValue;
    countSalary = Convert.ToInt32(item["_x041a__x043e__x043b__x0438__x04"]);

    That's not a lot of information to go on, but...
    Can you put a check in your FillRow method for a null object (or one of your fields being null) and put out diagnostic information? Or is it happening in the ListItemCollection iterator itself? (i.e. before it returns a row back to FillRow). If it's happening
    in the iterator, perhaps you could subclass it and return diagnostics at that point.
    I'm also wondering (if it actually always happen at row 90000) if you're hitting a limit in web service call, or iterator, or UDF code. Does the function ever return more than 90000 rows successfully?
    Hope this helps, Bob

  • How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    Question
    How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    '''IT'S A EASY AS IT SHOULD BE.'''
    This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
    This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
    # If you haven't already, open a bunch of tabs on a few different subjects.
    # Click the List All Tabs button on the right side of the tab strip.
    # Select Tab Groups.
    # Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
    # Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
    #A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
    # Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
    # Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
    # DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
    # Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
    # So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

  • When are init entries done in source system?And early delta initialization?

    Hi Friends,
    Q1) When are the init entries done in source system?
    If INIT entries are done when I run INIT that means:
    If my setup job finishes at 6AM and I run the INIT at 1 PM will I loose all data between 6AM and 1PM?
    If INIT entries are done when I run setup table i.e. when setup table load finish then
    If my setup job finishes at 6AM and I run the INIT at 1 PM...it will load data till 6AM
    and after that data would bere there in Delta queue. So, this is ok...as no loss of data.
    Q2) I  have read on help.sap that "With early delta initialization, you have the option of writing the data into the
    delta queue or into the delta tables for the application during the initialization request in the source
    system. This means that you are able to execute the initialization of the delta process (the init request),
    without having to stop the updating of data in the source system."
    Does this mean when I run INIT at 1PM, no V1 updates will happen for that DS in Source System?
    If Yes, that means I should always (when users are online) run INIT with early delta initialization
    during times when users would be online?
    Thanks!

    Hello,
    You will find the answers to the questions that you ask and the correct procedure to follow in the SAP note 602260.
    Best Regards,
    Des

  • Non functioning system

    Purchased a KT3 Ultra2 after reading good reviews. Replaced old Chaintech CT-7AJA motherboard. Fitted new 512MB DDR memory module (PC2100). Reconnected all devices etc. Switched on power. Front panel power LED came on. Hard drive LED came on for 20 seconds. Then nothing. No screen activity at all. No P.O.S.T. messages on screen. Put a floppy disk in the floppy drive. Floppy light did not come on after a reboot. Tried booting without memory module and beeping sounds heard. Replaced memory, still non functioning system. Put old mother board back. Every thing works fine. Took board back to PC World who replaced it. Tried again. Still non functioning. The problem is not my processor as it still works fine on old motherboard. (Removed sticky label from your socket A socket and used special cooling compound on heatsink).Problem is not my devices as they work fine on the old board.
    Has anyone else ever had this problem?
    It doesn't seem logical.
    Any suggestions appreciated.

    Quote
    Originally posted by wonkanoby
    you are going to have to format the drive and reload
    Why?? It is not even posting so it has nothing to do with OS problems. Yet. Even so I can't see any reason to format and reinstall an OS just because you have a new MB. Driver conflicts can be sorted out in safe mode.
    To Geoffery, What are your PSU current ratings for 3.3V and 5V rails? Are you positive you have your heatsink around the right way? Machined slot must go over the raised portion of the CPU socket.

  • Siebel UCM (OCH) is overwriting the Contact changes done by external system

    Hi All,
    We are using UCM for Contact data management. One external system is updating Contact data in UCM through inbound WS. But in Logs, we observed that first it is updating Contact data with values from external system but secondly it is automatically calling UCM Survivorship Engine (Method: IntelligentMerge) BS and updating Contact to old values again. Due to this, it is overwriting the changes done by external system and retaining the original contact values.
    We are using "PersonService" web service to update Contact. Also we are using Contact default Survivorship Rules with default criteria as "External" and created our own BS to update it.
    Please let me know, how should I stop UCM from overwriting my changes.
    Best Regards,
    Sandesh

    Hey Wilson,
    Thanks for your reply.
    We are aware of survivorship rules. We have defined our own survivorship rules with Default Criteria is "External". In that, we mentioned the name and method of BS. But somehow our changes are getting override by UCM. We have gone through logs, it is writing our changes and later calling BS: UCM Survivorship Engine, Method: IntelligentMerge, which is overwriting our changes.
    Thanks,
    Sandesh
    Edited by: Sandesh Ghatkar on Mar 11, 2013 12:05 AM

  • HT1529 I have multiple users on my Mac and I was wondering how you tell the system to retain all the user names so they don't have to enter their email addresses every time ???

    I have multiple users on my Mac and I was wondering how you tell the system to retain all the user names so they don't have to enter their email addresses every time ???

    Email addresses into what?
    Each user should have their own account and password to log in.  Each is independent of the other.  So for Mail each has their own Mail account if they set one up in Mail. 
    That's the way it should be set up.  Are you using a single account and allowing multiple users to use that one single account?  If so then in Mail at least you could set up individual mail accounts.  But everything else in the system is shared.

  • When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing.  i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

    When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Maybe you are looking for

  • Data Pump with parallel data ending up in 1st file!

    Oracle 10g 10.2.0.3 EE Ran the following command on a 16 core HPUX PA-RISC machine: expdp normaluser/password@RDSPOC FULL=y directory=DMPDIR parallel=12 dumpfile=exp_RDSPOC_2nd_%U.dmp logfile=exp_RDSPOC_2nd.log Database size, approx 900Gig of data Al

  • Maximum size of an SQL statement

    Hello, we get a short dump with runtime error DBIF_RSQL_SQL_ERROR and exception CX_SY_OPEN_SQL_DB. The dump occurs at the following select statement:         select * from /rtc/tm_inuse           appending table gt_zrtc4inuse           where obj_name

  • Upgrading Linux java 1.4.2 AMD 64 bit edition with Daylight Saving Time

    I am running 64 bit version of Java 1.4.2 It is the linux blackdown version because at the time Sun did not support a 64 bit version. Now I would like to upgrade java to fix the possible problems with the Daylight Savings Time change. I have tried th

  • Buzz when using 1/4 inch cables?

    Hi there, This isn't a question about Logic per se but I figure this would be the best place to get an answer. So I've found using many different setups that I consistently get a low-level buzzing when monitoring or recording from a 1/4 inch cable. I

  • BC-Adapter. Need proxy settings?

    Hi, i work on a idoc-scenario SAP -> XI -> BC ... In the RWB i got an error "Unknown Network". I think, this could be a proxy-problem, but in the bc-adapter i cannot find any settings to use a proxy? How can i solve this? Regards, Bernd