System profiler info. in SL not the same as Tiger

I am using Tiger on an iBook G4, and SL on a 2010 Macbook. I noticed that when using System Profiler, there are many Startup Items listed (none added by me) in Tiger, and "No information found" in SL. I also noticed different detail for Firewall -- Tiger lists a lot of denied items and SL just says "No" for Firewall and Stealth Mode. Are these just legitament differences between the OS versions or is my SL computer messed up? Also, does "No" for Stealth mean it is on or off. I have it turned it "On" in system preferences. Any help is appreciated.

Select your Smart Playlist in iTunes, arrange it in the order you want, then right-click on the Smart Playlist title in the sources panel and click on *Copy to Play Order*. Sync. Your iPod should now have the correct play order.
tt2

Similar Messages

Finder's "Get Info" Creator field not the same as "Creator Code"??

Can someone explain what the difference is between the "Creator Code" associated with a file, and what the Finder's "Get Info" shows as the "Creator" (in the "More Info" section)?? I have a program that will not process a file unless a specific application has created the file. But if I change the "Creator Code" with a utility like "Type & Creator Changer" from AlphaOmega, the "Get Info" command shows no difference in the "Creator" field of the "Get Info" window.
What is going on? What is the difference between these two "Creator" pieces of information of a file?
How can one change what is in the "Get Info" "Creator" field??
Thanks for your help...
-Bob

I don't think what you are talking about is the same as what I asked. I looked at the file that works with HexEdit and there is some other info about "CreatorTool" and "Creator" that in the case of the file that works is set to "ScanSnap Manager" and this is what appears in the "Creator" field of "Get Info" (in the "More Info" part of the GetInfo window). This is what I am guessing the Abbyy FineReader program is looking for to allow it to process the file. Without it it will not convert a PDF image file to a searchable text PDF file. Files that work and don't work can both have the "Open With" set to the same thing, so don't think that this has anything to do with the issue. Both can have the same "CreatorCode" too, so this is not it.
In fact I just verified that if I change the "Creator" info in a file that works, the FineReader software will not process it. But the problem is that just changing the "Creator" info in a file to "ScanSnap Manager" is not enough. Bummer...
So my dilemma is I can print a PDF file onto paper, then turn right around and scan it on the ScanSnap scanner and then FineReader will process it. But this is silly to have to print a file I already have the PDF of, let alone kill a few trees for the paper to print it on, in order to do the FindReader processing. Any suggestions??
So, the question still is, what exactly is the FineReader looking for and how do I change a PDF file to have it so that FineReader will process it??? Is there a utility that will add/edit this other CreatorTool and/or Creator info in the file???
Thanks...
-Bob

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

I just upgraded to iOS5. I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...

i just upgraded to iOS5. I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...

Start here, change your country if necessary and go to manage your account and request another email.

HT204053 Although I have iCloud, my system preferences still show Mobile.me. I have to sign in with my mobile.me ID which is not the same as my Apple ID. I want to change my iCloud ID and password. How do I do it?

Although I can access iCloud, my system preferences on my iMac still show Mobile.me. I have to sign in with my mobile.me ID which is not the same as my Apple ID. I want to change my iCloud ID and password to be consistent with my Apple ID and password. How do I do it?

you need to be running OSX 10.7 or 10.8 to use iCloud i believe. It shows you are using 10.6.8 which doesn't support iCloud.

BI Idoc Type IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE

Hi all,
how can we solve the IDoc miss match in source system (ECC6).
Error :
BI Idoc Type ZSTC029 IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE ZSTC031
please provide me solutions..
Thanks in advance,
Venkatesh

Hi Venkatesh,
Check here.........
BW idoc type not same as source system idoc type
Thanks,
Vijay.

RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

Hi Experts,
RSA1Source System (Context Menu) Check
I am getting the below error
<b>The BW IDoc type ZSBA011 is not the same as the source system IDoc type ZSBD012               </b>
What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
Where should i check to correct the error
Thanks

Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470      Activities after client copy in BW source systems
325525      Copying and renaming systems in a BW environment
184754      Procedure after BW database copy
184447      Building a BW-system landscape
184971      Notes on BW source system connections
140276      Error in source system assignment
524554      Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken
Message was edited by:
        Patrick Rieken - BI-Formance B.V.

BI IDOC type ZSBS042 is not the same as source system idoc type ZSBM023.

Hi Evrybody,
I got an error when trying to initialize the delta load.
Error Message :
BI IDOC type ZSBS042 is not the same as source system idoc type ZSBM023.
Thanks for the promt responses
Regards,
Zakir SM

Hi ,
I checked the IDOC with status 51.. I have this message
" No status record was passed to ALE by the application ".
what to do now...
Rgds,
Zakir

HT1657 I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Log-on client 200 is not the same as BI clients "600"

Hi Experts,
My data load got failed and when i checked the error message, it says " Log-on client 200 is not the same as BI clients "600"".
Diagnosis
You are using client-dependent BI functions in client 200. However, the standard BI client is 600.
System Response
The function is terminated.
Procedure
Maintain a destination in the BI standard client. For information, see SAP Note 522569.
I went through the sap note and checked the maintenance of rfc desination. But not able to uderstand this issue. Do anyone have good idea about this issue.
Thanks in advance.
Anand

Hi,
In BW, you must work on only client. As the error said, you log on to client 200, but using 600 client as the connected one. Please check the source system conncection whether it is given for the default client in RSADMINA table BWMANDT field or not. if not change that.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

I don't remember my iCloud username that was used when I set up my Iphone4s. I know my apple ID but that is not the same thing. I need it to activate my phone.

I don't remember my iCloud username that i made when i set up my Iphone 4s. i do know my apple ID but according to my phone, it's not the same thing. When I sign onto icloud on my computer, it allows me to use my Apple id. Not on my phone though..

Dear Apple Company.
My name is Nguyen Tran Dai from Vietnam.
i beg you Apple People can help me and understand my situation.
i love Ipad, and dont have much money to buy a brand new so i had to buy a second hand
i bought it from a Vietnamese girl by searching chotot.vn apps on internet on an android phone.
we met together at a coffee shop. i test ipad air run very well, so i paid her 8 million 400 vnd. and i checked her icloud account, i have seen nothing so i didn't restore it at that time.
when back home i restored it and it appeared the owner's account that asking me to sign in '' kich hoat ipad", i couldn't, i tried to give her many calls but she didn't answer me. now i feel i am tricked by her.
i just quickly run to Apple store in Saigon asking people for help, but they said if i have something to improve that is my ipad, sorry, i do not have anything, when i bought it from that girl i asked her the received she said she lost it , and her box she left in her countryside far away from Saigon.
now i see i am stupid and not good for technology, trust me , i love icloud as i have heard many people say it's good. but now i feel that is not good. i lost my money which i saved such a long time.
my ipad infos is
serial DM******FK15
model A1474
XU1***93-13003
PLEASE help me
my phone number in Vietnam is +******
now i feel sorry for my money gone easily because of me dont know much about ipad.
<Personal Information Edited By Host>

System profiler recognizes ipod but not in finder or itunes

My ipod is recognized on system profiles but it does not appear on finder or itunes! what do i do?HELP!

Josie20 wrote:
nothing happens when i reset it and the computer doesn't see it!
Ummm...earlier you said System Profiler saw it. Did/does it look like this or something different:
iPod:
Capacity: 495.62 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk3
Version: 10.01
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple
OS9 Drivers: No
Product ID: 0x1300
Serial Number:
S.M.A.R.T. status: Not Supported
Vendor ID: 0x05ac (Apple Computer, Inc.)
Volumes:
WALKINGSHUF:
Capacity: 495.59 MB
Available: 239.25 MB
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk3s1
Mount Point: /Volumes/WALKINGSHUF
<Edited by Moderator>

Windows Firewall issue, Inbound rule opend all, still not the same as turning off

This is Windows Firewall issue on Windows 8.1 Pro.
Backup Exec server cannot expand a computer node in selection list. I drill down to Microsoft Windows Network/Domain/Computers, then when I tried to expand a Windows 8.1 Pro computer node, it hangs out.
I narrowed this problem to Windows firewall related issue on Windows 8.1 Pro computer.
When I turn off Windows Firewall on Domain profile, Backup Exec Selection expands the computer node of the Windows 8.1 Pro computer. So, I created an inbound rule opening all to BAckup Exec server as following, but it's still not the same as turning off
Windows firewall specifically on Windows 8.1 Pro computer;
Any Local IP address, Any Remote IP address, Any port, Any protocol, All Interface, All Programs and Services, All profiles(Domain, Private, Public)
And there are no rules blocking any which may override the above rule.
Ethernet on Windows 8.1 Pro computer shows profile is linked with Domain, but just to make it work, I selected all profiles.
Even though I opened all available in inbound rule, it's still not the same as turning off windows firewall. Why am I missing?

It looks as something related to RPC(UDP 135), but even when inbound rule is all open, why it matters? RPC seems working fine only when firewall is turned off on domain profile.
Protocol 17 is UDP
Port: 135
===============================
Event ID 5152
The Windows Filtering Platform has blocked a packet.
Application Information:
Process ID:
0
Application Name:
Network Information:
Direction:
Outbound
Source Address:
192.168.1.120
Source Port:
0
Destination Address:
192.168.1.11
Destination Port:
0
Protocol:
1
Filter Information:
Filter Run-Time ID:
245836
Layer Name:
ICMP Error
Layer Run-Time ID:
32
The Windows Filtering Platform has blocked a packet.
Application Information:
Process ID:
0
Application Name:
Network Information:
Direction:
Inbound
Source Address:
192.168.1.11
Source Port:
35341
Destination Address:
192.168.1.120
Destination Port:
135
Protocol:
17
Filter Information:
Filter Run-Time ID:
245834
Layer Name:
Transport
Layer Run-Time ID:
13

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

System profiler info. in SL not the same as Tiger

Similar Messages

Maybe you are looking for