System refresh -- Export content of secure store ?
Hello,
We often perform system refreshes. To run this process smoothly we use database copy (copy over the datafiles files then recover the db).
We export several tables from the refreshed system before the DB copy. After the refresh we reimport them, this makes the sap level post processing lighter.
I would like to export the content of the secure store (tx secstore) then re impot it also. Has anyone already performed this ?
Thanks & krs,
aidan
Hi,
The data stored in the secure storage are encrypted with a key that includes the installation number and the system ID. If any of these changes, for example due to a system copy or a new license key, the data in the secure storage must be migrated. For information on migrating the secure storage data, see SAP Note 816861.
Please refer specified notes:
If you get a short dump CREATE_OBJECT_CLASS_NOT_FOUND then see SAP note 1053954.
If any "System dependant data for entryu2026" errors are reported then see note 816861
I hope it will help you.If not please let me know.
Regards,
Kiran .V
Similar Messages
-
Hi Folks,
We are planning to do a refresh from "AA" system to "BB" system.But "AA" system consist of only two drive like C drive consits fo USR data and D drive consists of AAdata1,AAdata2,AAdata3,AAlog.
Now "BB" System consists of 4 drives which is E,F,G,H.
Now I have to map C drive USR data to E drive and D drive AAdata1..n to F drive, D drive AAlog1 data to G drive in "BB"system.
I know how to detach and attach the database in MSSQL but I dont know how to map the USR data to E drive.
Can anyone please guide me.
Thanks
regards,
RalHi Ral,
A system refresh usually means refreshing the contents of the DB only.... basically you should have a "BB" system running... during the system refresh the contents of the /usr/sap forlder are not replaced.
If you want to do is a System copy then follow the steps on the Homogeneous system copy guide (available on SAP Marketplace) and it will let you choose the location.
Regards
Juan -
Restore SECSTORE security store after system refresh?
When we refresh a QA system from PRD, we first export the RFCDES table from QA, then perform the homogeneous system copy from PRD -> QA, and then import the RFCDES table we saved prior to the copy. This restores the various RFC destinations in the QA environment.
In recent releases, the password information has been moved out of the RFCDES table into the Secure Store; it looks like this is based on tables RSECTAB and RSECACTB. However, when we transport the contents of these tables and then bring them in again after the refresh, the RFC destination passwords are still marked invalid.
Has anyone refreshed a QA system while saving the RFC destinations, using the secure store? If so, how?
Thanks,
RichHi ,
As an initial check , please check for error/informaiton on Kernel.
OSS notes 816861 & 522536 will help you.
Regards
Nagaraju -
Issue with secure store key phrase during system copy export
Hi,
We recently upgraded our all production portals to SAP NW 7.31 SP7
(Migrated them from windows to Linux).
While taking the export in production portals, we are stuck at a stage
while defining parameters.
We did not move further if we tried the all the passwords at this stage.
We ran the key phrase check tool and found the key phrase we are
supplying is correct with the below command that tells us on the
sapinst screen
'<global directory>/sltools/checkKeyPhrase(.sh) -f <global
directory>/security/data/SecStore.properties'.
so the problem is not with the key phrase
We are stuck with system copy export as our refresh is halted because
of this issue.Screenshot is attached.
sapinst.log
'/usr/sap/put/usages_data_P0P.1.xml'.
INFO 2014-03-21 12:29:01.742
Copied file '/usr/sap/put/usages_data_P0P.xml' to '/usr/sap/put/usages_data_P0P.2.xml'.
INFO 2014-03-21 12:29:04.919
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.10
Execute step getUsageTypes of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:05.757
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.777
Execute step dss_checkForPI of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:05.887
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.907
Execute step checkKeyPhrase of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:26.291
Effective group id set to 202.
WARNING 2014-03-21 12:29:26.310
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:29:26.291 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:29:26.318
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:29:26.409
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:29:26.414
Effective group id set to 202.
WARNING 2014-03-21 12:29:26.434
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:29:26.414 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:38:17.491
Effective group id set to 202.
WARNING 2014-03-21 12:38:17.512
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:38:17.491 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:38:17.527
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:38:17.618
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:38:17.626
Effective group id set to 202.
WARNING 2014-03-21 12:38:17.647
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:38:17.626 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:43:38.969
Effective group id set to 202.
WARNING 2014-03-21 12:43:38.992
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:43:38.969 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:43:39.6
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:43:39.101
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:43:39.113
Effective group id set to 202.
WARNING 2014-03-21 12:43:39.140
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
sapinst_dev.log
TRACE
2014-03-21 12:43:39.67 [syuxcuser.cpp:643]
PSyGroupImpl CSyUserImpl::getPrimaryGroup()const
lib=syslib module=syslib
account user="p0padm" uid="390" exists with parameter gid="301"
TRACE
2014-03-21 12:43:39.87 [syuxcuser.cpp:643]
PSyGroupImpl CSyUserImpl::getPrimaryGroup()const
lib=syslib module=syslib
account user="p0padm" uid="390" exists with parameter gid="301"
TRACE
2014-03-21 12:43:39.97 [syuxctask.cpp:270]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 20950
INFO
2014-03-21 12:43:39.101
CJSlibModule::writeInfo_impl()
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
TRACE
2014-03-21 12:43:39.137 [syuxctask.cpp:880]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 20950 returned 100
WARNING
2014-03-21 12:43:39.140
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
TRACE
2014-03-21 12:43:39.140
check key phrase returns: 100
TRACE
2014-03-21 12:43:39.141
NWException thrown: nw.syscopy.java.secStoreFSException:
Error checking key phrase, see output of log file '/usr/sap/put/checkKeyPhrase.log'.
TRACE
2014-03-21 12:43:39.142
Function setMessageIdOfExceptionMessage: nw.syscopy.java.secStoreFSException but already set to nw.syscopy.java.secStoreFSException
TRACE
2014-03-21 12:43:39.269 [iaxxgenimp.cpp:660]
CGuiEngineImp::showMessageBox
Error checking key phrase, see output of log file '/usr/sap/put/checkKeyPhrase.log'.
TRACE
2014-03-21 12:43:39.270 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE
2014-03-21 12:43:42.489 [iaxxdlghnd.cpp:165]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE
2014-03-21 12:43:42.490 [iaxxcnclhd.cpp:158]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
CCancelHandler: ACTION_ERROR received
TRACE
2014-03-21 12:43:42.490 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
CheckKeyPhrase.log
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
Logs are attached.Request you to please have a look on this with priority.
Regards,
Sudheer.Hi Sudheer,
You need to provide the keyphrase correctly.
<global directory>/sltools/checkKeyPhrase(.sh) -f <global
directory>/security/data/SecStore.properties'.
If you don't know the keyphrase...ten change it in configtool and take a restart of the system since you have the downtime with you.
Activating Secure Storage in the File System (SAP Library - System Security)
With Regards
Ashutosh Chaturvedi -
Homogeneous System Copy - Export Import of RFC's, ALE, Content Repositories
Good Morning,
I have a landscape with a Development and Production Systems with SAP R3 Enterprise 4.70 Ext 110, MaxDB 7.5, HP-UX 11.23. A Homogeneous System Copy is going to be done from Production to Development.
I have a idea to be able to recover the RFC's, ALE and Content Repositories Information after the Copy, which is to create a transport order with the structures which contain data for the RFC's definition, the ALE configurations and definitions and the Content Repositories configurations and definitions in Development and after the copy, transport the orders back to Development. The problem is that i don't know which structures should i use, and if my idea is viable?
For example, if i go to transaction oac0 and look at the content repositories and if i look at the Technical Information, i can see that the fileds with data are from Structure SCMS_SCREP, but my question is, inserting thsi structure in a transport order to import after the copy willbe enough? Aren't there more structures i need to insert in a transport order? And for RFCs and ALE?
Can anyone help me on this matter please?
Kind Regards,
Pedro GasparHi,
If the target system is being refreshed then first secure any information that you may require.
1) Backup user master and authorization data from each client where this data needs to be retained.
Use transaction SCC8 to export this data. Select profile SAP_USER and specify target system = TARGET_SID.
2) Backup RFC tables to restore destinations afterwards.
the only below tables required to take backup.
Call SE01 and create a new request of type = ""Transport of Copies"" with description = ""Export RFC destination tables prior to system refresh"".Make sure to specify a Target for the request or no data file will be created.
RFCATTRIB
RFCCHECK
RFCDES
RFCDESSECU
RFCDOC
3) ALE / Partner profiles.
Call WE20 and select each partner profile.
Follow menu path ""Partners --> Check"" and obtain a list of tables used.
The only tables listed were the ones listed below.
These tables are client-dependant therefore you will have to logon to each client and call SE01 and create a new request of type = ""Transport of Copies"
EDPP1
EDP13
EDP21
Also document the WE21 --> Ports --> Transactional RFC" section.
Run transaction BD64 and document each configured distribution model. This information is client-dependent so make sure to record values for each required client. and also record RFC destinations for synchronous method calls in BD97.
I hope it will help you.
Regards,
Kiran .V -
Security steps in system refresh
Hi all,
what are the pre steps and post steps from security point of view that needs to be performed on the target system when we do a system refresh .
Thanks.Hi,
There some additional things to consider....
If the source system for the copy is a child system of another CUA model, then after the copy you have to delete the CUA model from the client that has been refreshed - this includes deleting the CUA model from BD64.
Once the copy is complete you have to double check the logical system of the refreshed client - very often this step is overlooked and it means that your RFC destination for this child system is no longer valid.
I agree with the previous post of exporting the SAP_USER profile from the target client, before the refresh takes place.
Regards -
Export partner profiles and SM59 Entries before system refresh
Hello All,
How to Export partner profiles and SM59 Entries before system refresh in Netweaver
thanks
ShyamIn SDN search with name RFC export ..you will get so many answers ..
Once again please find the below prcoess for RFC export/import during system refresh.
RFC Export --
go to trans dir.. and then create .ctl file as below
#cd /usr/sap/trans/bin
#vi export_rfc_<sid>_<date>.ctl
#Please create the data file as u201Cexport_<SID>_rfc_<Date>.datu201D
Export
Client=<XXX>
file '/usr/sap/trans/data/export_<SID>_rfc_<Date>.datu2019
delete from rfcattrib
select * from rfcattrib
delete from rfcdes
select * from rfcdes
delete from rfcdoc
select * from rfcdoc
delete from rzllitab
select * from rzllitab
delete from ZTCA_USER_LANG
select * from ZTCA_USER_LANG
delete from rfcsysacl
select * from rfcsysacl
delete from rzllitab
select * from rzllitab
#After that excute export command as below.
R3trans u2013w <export_rfc_<targetSID>_date.log> export_rfc_<targetSID>_date.ctl>
(Format is: R3trans u2013w <logfile> <controlfile>)
Export is finished....
Import
Example:
#cd /usr/sap/trans/bin
#vi import_rfc_pta_11042004.ctl
#Please enter the exported RFC data file in the import control as follows:
import
file '/usr/sap/trans/data/export_pta_rfc_11042004.dat'
(Enter the file name, which is created during the export process)
Regards,
Srinivas Chapa. -
CE71SR5 install failure (Start SAP Secure Store in the File System)
Hi!
when i install CE71SR5 CompositionPlatform,met a question, below is the log information, waiting help,thanks.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log: INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.021] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.security.core.server.secstorefs.SecStoreFS" INFO: Loading 8 JAR files: [C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar] INFO: Start SAP Secure Store in the File System - Copyright (c) 2003 SAP AG FATAL: Main class "com.sap.security.core.server.secstorefs.SecStoreFS" cannot be started: java.lang.ExceptionInInitializerError at javax.crypto.Cipher.getInstance(DashoA12275) at javax.crypto.Cipher.getInstance(DashoA12275) at iaik.security.provider.IAIK.a(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at com.sap.security.core.server.secstorefs.Crypt. (Crypt.java:85) at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:175) at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:836) at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1306) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161) Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs at javax.crypto.SunJCE_b. (DashoA12275) ... 14 more Caused by: java.lang.SecurityException: Cannot locate policy or framework files! at javax.crypto.SunJCE_b.i(DashoA12275) at javax.crypto.SunJCE_b.g(DashoA12275) at javax.crypto.SunJCE_r.run(DashoA12275) at java.security.AccessController.doPrivileged(Native Method) ... 15 more FATAL: com.sap.engine.offline.OfflineToolStart will abort now with exitcode 2.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.I have the same problem.
Although i try it use jdk1.5.0.16, the same err occured.
Also i use the jce_policy-1_5_0.zip.
I will appreciate your answer.
I have resolved the problem by copy the
local_policy.jar
US_export_policy.jar
to
sapinst_instdir\CE71_DEV_ADA\INSTALL\sapjvm\sapjvm_5\jre\lib\security
Edited by: wang zhen on Aug 28, 2008 11:08 AM
Edited by: wang zhen on Aug 29, 2008 9:53 AM -
Difference between client Export/Import and a system refresh
Hi Experts,
I would like to know the diffrence between client Export/Import and System refresh.
Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
Thanks & Regards,
InjamuriHi,
What is system refresh when and why it is done?
The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
Mostly the refresh of clients will be happen at the time of development stage.
System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
The process to carry out the same is as follows:
1. Create a client on quality system using txn scc4
2. Create a RFC between Production system and Quality System (need to create on quality system)
3. Login to the newly created client using sap* and pass as a password
4. Txn sccl to start the client copy.
You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
Anil -
Secure Store Service and Schedule Data Refresh
Hi
Can you please let us know how many (max) target application's we can create under 1 secure store service application?
As we know, Manage Data Refresh feature is only available for PowerPivot Service Report and we can access it from Sharepoint to schedule the Workbook for Data Refresh.
As per our requirement, we need to build a interface to use this Schedule data refresh feature in a separate browser not from SharePoint. Please let us know how to build this interface, is there any option to use API Web Service.
Thanks in advance.
Regards
K.V.B.GururaajaHi,
For your first question, refer to the following link:
https://social.technet.microsoft.com/Forums/en-US/ab7f24eb-0cbf-4101-931e-1f89446e2149/secure-store-service-target-application-max-number?forum=sharepointgeneral
For your second problem, could you offer a screenshot about what is your intention?
Besides, take a look at the article about PowerPivot data refresh options:
http://www.sqlchick.com/entries/2012/11/17/powerpivot-data-refresh-options.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
SP2010 Secure Store Encryption Key Must Be Refreshed After Reboots
We use a Secure Store Service Application for several external connections. All else appears normal, however, we frequently find that the master encryption key requires a manual refresh. In the meantime, the secure store service application is
non-functional, and of course so is everything beyond it, for users.
The issue has been occurring since we set SSSA up months ago. It's been difficult to pinpoint exactly the types of actions that produce this state. It appears common that a reboot of the SharePoint server (all-inclusive, one server in farm, SQL
services elsewhere on different server) triggers the need for a key refresh. We have reproduced the issue each of the past two nights, with scheduled reboots.
When in Central Administration, the Secure Store Service Application page shows "Unable to obtain master key".
If we try to access a data connection beyond the SSSA, Windows logs receive a few events:
Windows Application log shows Event ID 7522 from Secure Store, saying "[...] encountered a failure while restoring the encryption key. The error returned was: 'Exception of type 'Microsoft.Office.SecureStoreService.Server.KeyManagement.InvalidMasterKeyException'
was thrown.'."
Another event, ID 7535 is also thrown: "[...] failed to retrieve the master secret key. The error returned was: 'Unable to obtain master key.'"
Any help or insight is greatly appreciated!Hi John,
After you create the Secure Store service application and the proxy, you have to refresh the encryption key.Here is the steps to refresh the encryption key:
1.On the Central Administration home page, in the Application Management section, click
Manage service applications.
2.Click the Secure Store service application.
3.In the Key Management group, click Refresh Key.
4.In the Pass Phrase box, type the pass phrase that you first used to generate the encryption key.
This phrase is either the pass phrase that you used when you initialized the Secure Store Service service application or one that you used when you created a new key by using the
Generate a New Key command.
5.Click OK.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Portal down after system refresh
Hello all,
We have done a system refresh for QAS from PROD for BI with export import of the backup into test. Everything was ok and refreshed BI is working fine but the SAP BI PORTAL is down. Nothing it is working. I can`t acces the link of the portal nor the visual admin nor configtool. Can you help us making the test working. I know a solution of reinstalling the portal with sapinst but i do not belive that this is the only solution.
The Test Portal have nothing changed. It is the same like it was but the BIT has changed a lot. Can anybody give some ideas how to make it work?
I give you some information found in logs:
dev_jrfc.trc : Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
Error> occured >Tue Aug 24 09:21:56,809<
RfcException:
message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=11 GWHOST=localhost GWSERV=sapgw11 PCS=1
LOCATION CPIC (TCP/IP) on local host
ERROR partner '127.0.0.1:sapgw11' not reached
TIME Tue Aug 24 09:21:56 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER 8
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
default trace: #2#================================== Connection ==================================
ID 502279030649651208
Type QueueConnection
Mode STOPPED
isClosed YES
com.sap.jms.server.SynchronousNetworkAdapter@32af32af isClosed = false waitTableSize = 0 conectionId = 8----
ConnectionMetaData -
JMSVersion Version 1.1
PorviderVersion Version 1.0
SupportedJMSXProperties JMSXGroupID, JMSXGroupSeqJMSXDeliveryCount
================================================================================
#javax.jms.JMSException: JMS Service is stopped
SO we can`t acces Visual Admin and configtool.
Thanks in advanceSo i have open both files services / hosts.. and everything seems to be ok. On services i found
sapgw11 3311/tcp # SAP System Gateway Port
The servers are AIX and the DB si Oracle. Nobody changed these files for more than 2 years and before refresh oh QAS the portal worked just fine. Practically the problem is that there is no connection between BI TST and TST portal. Nothing even at unix level. I think the problem is soewhere between DB and portal.. because he can`t find any connection.
Some other log files:
database.1.log :
#1.5 #001A64E912A200310000003B001570BE00048E8BC8337BDA#1282630917258#/System/Database/sql/jdbc/direct##com.sap.sql.jdbc.direct.DirectConnection#######SAPEngine_System_Thread[impl:5]_27##0#0#Error#1#com.sap.sql.jdbc.direct.DirectConnection#Java#com.sap.sql_0003#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection beta:BIT:SAPBIPDB: code=17,002, state="null", message="Io exception: Connection reset";
SQL statement is "ROLLBACK".#5#17002#<null>#Io exception: Connection reset#beta:BIT:SAPBIPDB#ROLLBACK#
server0.log : #1.5 #001A64E912A200450000082C001570BE00048E8BC83E8D97#1282630917983#/System/Server##com.sap.caf.eu.cc.content.svc.CCServiceFrame#######SAPEngine_System_Thread[impl:5]_75##0#0#Error#1#com.sap.caf.eu.cc.content.svc.CCServiceFrame#Plain###Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl
javax.naming.NoInitialContextException: Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl. Root exception is java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl
at java.lang.Class.forNameImpl(Native Method)
1.5 #001A64E912A200680000003B001570BE00048E8BC82CCE12#1282630916813#/System/Security#sap.com/com.sap.workflow.j2eemoni#com.sap.engine.services.security#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.engine.services.security#Java#security_3031#com.sap.engine.services.security.exceptions.SecurityResourceBundle#Cannot get run_as identity for the security role "".#1#MBeanCreator#
#1.5 #001A64E912A20009000006CF001570BE00048E8BC83BC936#1282630917802#/System/Security##com.sap.engine.services.userstore#######SAPEngine_System_Thread[impl:5]_64##0#0#Info#1#com.sap.engine.services.userstore#Plain###Service userstore stopped OK#
Thanks -
The Secure Store Service application Secure Store Service Proxy is not accessible
I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 Secure Store Service
Secure Store g0n6 High The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General 8nca Medium Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
trial period for this product has expired or Secure Store Shared Service is not supported for this SKU. at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
operation) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated() at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage) at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView() at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General 8nca Medium ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
Runtime tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
has expired or Secure Store Shared Service is not supported for this SKU. at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated() at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage) at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView() at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
Runtime tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage) at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General ajlz0 High ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General ajlz0 High ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.86 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General aat87 Monitorable b3b6e19b-7de2-e016-ad32-0fc975829ef0
Is it a bug or any issue in configuration?
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.Hello
something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
1> MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
2> Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
2> Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
2> Copying all files to temporary location below for package/publish:
2> obj\Debug\Package\PackageTmp.
2> Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
2> Adding sitemanifest (sitemanifest).
2> Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding declared parameter 'IIS Web Application Name'.
2> Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
2> file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
2> To get the instructions on how to deploy the web package please visit the following link:
2> http://go.microsoft.com/fwlink/?LinkId=124618
2> Sample script for deploying this package is generated at the following location:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
2> For this sample script, you can change the deploy parameters by changing the following file:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
2> Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
3>Active Deployment Configuration: Deploy App for SharePoint
3>Uninstall app for SharePoint:
3> Skipping the uninstall step because the app for SharePoint is not installed on the server.
3>Install app for SharePoint:
3> Uploading the app for SharePoint...
3> Creating a trusted root authority in SharePoint for IIS Express.
3> Installation is in progress (00:00:00)
3> Installation is in progress (00:00:01)
3> Installation is in progress (00:00:02)
3> Installation is in progress (00:00:03)
3> Installation is in progress (00:00:05)
3> Installation is in progress (00:00:06)
3> App failed to install, cleaning up...
3> App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
3> App installation encountered the following errors:
3>
3> @"Error 1
3> CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3> ErrorDetail: The remote hosting service is not configured.
3> ErrorType: Configuration
3> ErrorTypeName: Configuration
3> ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3> Source: RemoteWebSite
3> SourceName: Remote Web Site Deployment
3>
3> @"Error 2
3> CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3> ErrorDetail: The remote hosting service is not configured.
3> ErrorType: Configuration
3> ErrorTypeName: Configuration
3> ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3> Source: RemoteWebSite
3> SourceName: Remote Web Site Deployment
3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ========== -
Java Install, Cannot insert a key value pair into the secure store fails,
Dear All,
I'm doing Java Intallaion in BI7 on CI and in the midle of installtions we encounter,
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.secureStore.cannotInsertIntoSecureStore:
Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR 2008-04-23 11:36:21
CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-04-23 11:36:21 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .
TRACE [iaxxgenimp.cpp:719]
showDialog()
There's any want in here can help us Please,
Thanks and Best Regards,
ChrisnaThe clean way to Uninstall JAVA is through SAPINST.
Make user you drop only the JAVA Schema ID (SAPSR3DB)
If you want to uninstall manually, follow as mentioned below :
1. Stop the central services instance and all dialog instances of your SAP system:
a) Log on to the corresponding instance host as user <sapsid>adm.
b) Execute the following commands:
To stop the central services instance:
stopsap r3 <SCSinstanceName>
To stop a dialog instance:
stopsap r3 <DialogInstanceName>
2. Stop the J2EE Engine of the central instance:
a) Log on to your SAP system.
b) Call transaction SMICM.
c) Choose Administration J2EE Instance (local) Send Hard Shutdown
2. Drop the J2EE DB schema (the db schema for this one SAP SID) BE VERY CAREFUL, do not drop the DB schema for another existing system or
the ABAP schema.
a. Log on as user ora<dbsid>.
b. Start sqlplus and connect to the database. Enter:
sqlplus /nolog
c. SQLPLUS>connect / as sysdba
d. Enter the following command to delete the database objects of the database schema:
SQLPLUS> drop user SAP<SCHEMA_ID>DB cascade;
e. Enter the following command to get the file name of the corresponding data file in the file system:
SQLPLUS> select file_name from dba_data_files where \
tablespace_name = PSAP<SCHEMA_ID>DB;
f. Enter the following command to delete the tablespace of the database schema:
SQLPLUS> drop tablespace PSAP<SCHEMA_ID>DB including contents;
g. Exit sqlplus:
SQLPLUS> exit
3. Remove folder "data" at: /sapmnt/QO1/global/security/data
4. Remove folder "SDM" at: /usr/sap/<sid>/<Central instance>/SDM
5. Remove folder "j2ee" at: /usr/sap/<sid>/<Central instance>/j2ee
6. Revert CI instance profile to their original state (backup copies should exist) # they should be in the state before the start of the JavaAdd In
7. If lines beginning with the following parameters appear, delete these lines from the default profile, /usr/sap/<SAPSID>/SYS/profile/DEFAULT.PFL:
j2ee/dbname =
j2ee/dbtype =
j2ee/dbhost =
j2ee/dbadminurl =
j2ee/scs/host =
j2ee/scs/system =
j2ee/ms/port =
8. If lines beginning with the following parameters appear, delete these lines from the central instance pro?le and from all dialog instance pro?les,
/usr/sap/<SAPSID>/SYS/profile/<SAPSID>_<INSTANCE_NAME>_<host_name>:
exe/j2ee =
exe/jlaunch =
rdisp/j2ee_start_control =
rdisp/j2ee_start =
rdisp/j2ee_timeout =
rdisp/j2ee_libpath =
rdisp/frfc_fallback =
jstartup/trimming_properties =
jstartup/instance_properties =
jstartup/protocol =
jstartup/vm/home =
jstartup/max_caches =
jstartup/release =
j2ee/dbdriver =
9. Delete the central services instance
10. Restart ABAP and Install JAVA Add-in
Edited by: Shaji Jacob on Apr 27, 2008 11:46 AM
Maybe you are looking for
-
Inability to draw simple graphics in Java properly (threads and JFrame)
I am trying to use a thread to continually draw randomly positioned and randomly sized squares in the middle of a JFrame window. I have got 'something' working with the following code, however when run, the actual window doesn't come up properly. If
-
HELP! HP LaserJet Pro M1217nfw MFP Wireless setup
I cannot set up my HP LaserJet Pro M1217nfw MFP to print wirelessly. I do not have a router and bought this machine because I was told this printer was an easy ad hoc install. I have a MacBook that runs OS X 10.6.8. 4 hours later and I'm dying here!
-
Hi all, When i am Shopping through catalogue, an HTML page get displayed. When i Filled the details and click in OK button.the data from HTML get transfeerd to SRM, and a line item gets created. Problem is: on clicking on OK some time 2 line items ge
-
My "remote" can't control my Apple TV, however apple tv still received signal from "remote" . Before that I have to press and hold the menu button, then the "remote" icon appeared on the screen.
-
Hi All, Kindly help me in resolving the below query:- select to_char(rcv.creation_date,'MON-YY') "Receipt Creation Date" from table_name rcv where rcv.creation_date BETWEEN NVL(:p_date_from,'01-JAN-1900') AND NVL(:p_date_to,'31-DEC-4712') order by 1