SystemTray difference between Debian and XP

Hi, I'm trying the new SystemTray functionality. In
XP I get the following events when I press a mouse
button:
- mousePressed
- mouseReleased
- mouseClicked
That is ok, but in Debian with KDE I only get the
following when I press the right mouse button:
- mousePressed
With the left button it works ok. Is it a bug?
I need the mouseClicked event in both platforms, any
suggestion?You say in the Windows environment that you get a mouseClicked event and then you go on to say that "With the left button it works ok." Your question seems fairly trivial to me, use the mouseClicked in both environments.
If you are trying to say you need a mouseClicked from your right button in the Debian KDE environment, and it does not supply it, then you need to approximate it--if the mouse is pressed, then you can assume that there was a "click" if it is over an object. If you need double click then time between clicks.

Similar Messages

Questions about the differences between Arch and Chakra.

I'm trying to decide whether to install Arch or Chakra on my laptop. Currently, I'm running Arch on my desktop and Windows 7 on my laptop (which I plan to overwrite). My skill level with GNU/Linux is somewhat intermediate – noobs refer to me as an expert, experts refer to me as a noob. If it matters, I'm a KDE user and primarily use my computers for web browsing and python development. Anyway, I just wanted to get an objective opinion on the differences between Arch and Chakra. I have a few points that stand out to me, but I welcome any input.
-Stability
I started my journey into GNU/Linux with Debian back in 2009 due to it's stability. I really disliked Debian's ancient software and considered moving my system to Unstable. While doing some googling about Debian Unstable, I stumbled across Arch – it was love at first sight. I've been an Arch user ever since. I love the bleeding edge software, and haven't had any major problems since I originally installed it. However, every time I run a system update I cringe a little. While Arch hasn't broken on me yet, I've read plenty of horror stories and it makes me uneasy. I understand that Chakra is a mix between a point and rolling release model. Is it any more or less stable than Arch? I know there are other distrobutions out there, but I'm in love with the Arch philosophy.
-Security
Pretty self-explanatory, but is there any difference in security between the two?
-AUR
As much as I love Arch, I wouldn't be able to stand it if it weren't for the massive collection of software available in the AUR. While I'm perfectly capable of compiling software myself, I prefer to use a command like tool like yaourt to manage my software. I understand that Chakra doesn't officially support the AUR and that they have their own user repository. Seeing as Chakra is still relatively new, is it lacking? Will I miss the AUR as a Chakra user?
-Repositories
Is there much difference in the official repositories between the two distrobutions?

avonin wrote:
I'm trying to decide whether to install Arch or Chakra on my laptop. ... I'm a KDE user ... I just wanted to get an objective opinion on the differences between Arch and Chakra..
-Stability...
-AUR...
-Repositories...
My take on Chakra is that it's the same as Arch with different developers. They use pacman. They have a different and rather nice build system for their developers. They're doing a good job, but I'd hate to give up the services of Allan McRae who must work full time keeping the Archlinux core and toolchain up to date. Chakra devs probably piggy-back off his work.
As for "semi" rolling: I don't see Chakra as having a stable core. A stable core sounds attractive, it would be like NetBSD which has a very stable core Unix operating system with apps added via pkgsrc. But Chakra's core and toolchain is at the same version levels as Archlinux most of the time and are no more tested and stabilized than ours. Their core packages are updated piecemeal just like ours; there is no stable core that is released as a unit (afaik). Today Chakra has gcc 4.7 / glibc 2.15 just like ours. Their kernel is a little more stable: they're using udev 181 / linux 3.2.8 while Arch is on udev 182 / linux 3.3.7. They are more conservative in upgrading xorg and the video drivers than Arch. For example, today they're on xorg-server 1.10.4 / intel video 2.17 while Arch is up-to-the-bleeding-edge-minute with xorg-server 1.12.1.902 and intel video 2.19. Yeah, I would consider Chakra to be a little more "stable" than Arch mainly because of their relaxed pace in changing the kernel and the xorg stuff.
Most of the patches that I look at for Arch packages (I build my system entirely from source and try to build monthly releases for myself) are needed because we use more recent core packages like glib2/glibc/gcc than the developers of higher level stuff like qt. Chakra is in the same situation. We're on the front of the wave
The Chakra CCR is compatible with the Arch AUR and mainly draws from AUR (an AUR buildscript will usually work fine on a Chakra system -- they just add one or two additional info fields.) With a little effort you could get any package installed on a Chakra system that is available on Arch.
Last edited by sitquietly (2012-05-24 20:43:58)

Difference between Null and null?

What is the difference between null and NULL?
When is each used?
Thanks,

veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion.

Difference between GUI_UPLOAD and WS_UPLOAD

Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
Satish

I would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES.   Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
         exporting
              filename                = filename
              filetype                = 'ASC'
         changing
              data_tab                = iflatf
         exceptions
              file_open_error         = 1
              file_read_error         = 2
              no_batch                = 3
              gui_refuse_filetransfer = 4
              no_authority            = 6
              unknown_error           = 7
              bad_data_format         = 8
              unknown_dp_error        = 12
              access_denied           = 13
              others                  = 17.
Regards,
Rich Heilman

Difference between char and varchar, also the difference between varchar2

Hi,
Can anyone explain me the difference between char and varchar, and also the difference between varchar and varchar2...

Varchar2 is variable width character data type, so if you define column with width 20 and insert only one character to tis column only, one character will be stored in database. Char is not variable width so when you define column with width 20 and insert one character to this column it will be right padded with 19 spaces to desired length, so you will store 20 characters in the dattabase (follow the example 1). Varchar data type from Oracle 9i is automaticlly promoted to varchar2 (follow example 2)
Example 1:
SQL> create table tchar(text1 char(10), text2 varchar2(10))
2 /
Table created.
SQL> insert into tchar values('krystian','krystian')
2 /
1 row created.
SQL> select text1, length(text1), text2, length(text2)
2 from tchar
3 /
TEXT1 LENGTH(TEXT1) TEXT2 LENGTH(TEXT2)
krystian 10 krystian 8
Example 2:
create table tvarchar(text varchar(10))
SQL> select table_name,column_name,data_type
2 from user_tab_columns
3 where table_name = 'TVARCHAR'
4 /
TABLE_NAME COLUMN_NAME DATA_TYPE
TVARCHAR TEXT VARCHAR2
Best Regards
Krystian Zieja / mob

The difference between Lion and Mountain Lion

Can some one explain to me the difference between Lion and Mtn Lion? I'm currently 10.6.8 Is it beneficiall for me to upgrade?

Mountain Lion is an enhanced version of previous OS X and so that is Mavericks.
About upgrading it all depends on what your needs are and if your hardware supports it.
System requirements for OS X Lion
System requirements for OS X Mountain Lion
OS X Mavericks: System Requirements
Please check also applications compatibility. From Lion onward, you cannot run PPC application.

The difference between N80 and N80IE ?

What is the difference between M80 and N80ie?

02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE?

The difference between SFP+ and X2

Dear Expert,
I need to know what is the difference between SFP+ and X2! and can I use SFP+ card and module instead of X2?
Thanks,
Mohammad Saeed

Hi,
They are both used for 10Gig interfaces. The difference is the connector type.
SFP+ is LC and X2 is SC.
You can not put an SFP+ into an X2 slot or X2 optic into a SFP+.
HTH

Difference between ok_code and sy-ucomm

Hi,
Can any one tell me the difference between ok_code and sy-ucomm

Hi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.

What is difference between abstraction and encapsulation ?

Hi,
I am trying to figure out the difference between abstraction and encapsulation but confused.
Both are used for data hiding then what is the exact difference ?
Thanks.

Tushar-Patel wrote:
I am trying to figure out the difference between abstraction and encapsulation but confused.
Both are used for data hiding then what is the exact difference ?This is the picture I have:
When you encapsulate something you get an inside and an outside. The outside is the abstraction. It describes how the encapsulated entity behaves viewed from the outside. This is also called the type. Hidden inside is the implementation. It holds detail information about how the type's behaviour is accomplished.
It's a very simplified picture but I think it's quite accurate and it works for me.

What is difference between Iterator and Collection Wrapper?

Hi all,
I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator??
Thanks,
Chinnu.

L_Kiryl is right.
Collections support global iteration (through collection->get_next( )) and local iteration (through iterator->get_next( )).
Each collection has a focus object. Initially, the first object has the focus.
Any global iteration moves the focus, which is published by the event FOCUS_CHANGED of the collection.
If you want to iterate on the collection without moving the focus (and without triggering timeconsuming follow-up processes) you can use local iteration. To do so, request an iterator object from the collection and use this to iterate.
And one more advantage of using iterator: it takes care of deleted entities. If you use global iteration then when you reach deleted entity it will be an exception. But there is no exception with iterator in the same situation.

What is difference between modify and update i am using

hi
what is difference between mofify and update
my requiremen is to have three condition checkec while mofifying or updating from a internal table
the three fields are
cus no
status
date these all are primary key in the database table
so which sould i use modify or update
there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
pls suggest whihc to use and how to implement the check on teh threee primary key
like if modify ztable from table it_test
now where condition ? can be used or not with modify? and if yes how
if not should i use update will update create a new entry if no entry is there and please give syntex
regards
Arora

Hi Nishant Arora,
Modify: It works in performing two actions.
They are: Insert + Update.
For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
These are the cases you need to write these statements.
Syntaxes: :
Go through this links please.,
http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
Reward points if useful
Cheers,
Swamy Kunche
Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM

What is Difference between SXMB_MONI and SXMB_MONITOR?

what is Difference between SXMB_MONI and SXMB_MONITOR?
Can any explain to this question.please?

Hello,
Both are same.
SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
SXI_MONITOR directly executes the monitoring report.
Thanks,
Satya

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

SystemTray difference between Debian and XP

Similar Messages

Maybe you are looking for