T-code for broadcasting

Hello!
Does anyone know the t-code to create a broadcast setting? I would like to create a broadcast through the SAP GUI back-end rather than running it through the portal. Is there a t-code to do that?
Thanks!
Andrew

Hi,
There is no direct T-Code for creating a broadcast setting. You can create a broadcast setting from SAP Gui by running the query in RSRT. Here is the detailed steps,
1) Goto RSRT
2) Select the query you want to execute.
3) Select the Query Display Option as HTML.
4) execute the query.
5) In the next screen, Click on the tab that says Information broadcasting.
6) Click the button that says Create a New Setting.
7) Provide the prerequisite details here.
Thus one setting is created for this particular query result broadcasting. You can create N number of settings for one query, though I dont know how many exactly.
To view all the settings that are created in your system - use the transaction RSRD_ADMIN, Click on Settings, replace the user field on this screen with ' * ' and execute.
Let us know in case of any further questions.
regards,
Sree.
Edited by: Sree Nair on Aug 27, 2009 11:33 AM

Similar Messages

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Socket for broadcast and receive?

Hi all,
sorry for cross post but I need an answer soon.
The server need to broadcast an inviting message continuosly. and at the same time the socket is able to receive any messages from the client.
I use 2 threads. One iniiated with Socket for listening and the other multicast socket with datagram.
However, I don't think I did it the right way?????
one thread: skt = new ServerSocket(4446);
broadcast thread:
MulticastSocket socket = new MulticastSocket(4446);
InetAddress address = InetAddress.getByName("230.0.0.1");
socket.joinGroup(address);
DatagramPacket packet;
any suggestions?
Any souce code for server and client?
any documents, url?
thanks
andrew

ServerSockets go with MulticastSockets like baloney and whip cream.
ServerSockets are for connection-based sockets.
MulticastSockets are for connection-less datagram sockets
Pick one type based on your requirements and stick with it.
Either ServerSockets and Sockets
or MulticastSocket with MulticastSocket.

Is there any mechanism for broadcast messages for every client?

Hi, all
I just wanna to develop such a kind of chatting program. So I just build the communication structure for that. I want to use UDP protocol to send and recieve messages. As we know about that protocol, it does not need connection between server and client, so some packages will be lost. I just used only one DatagramSocket to recieve and send any messages back and forth. And I implemented the client using multithread technique. The problem is that when multiple client sent messages to server, how could server broadcast the specific message to all clients. I am very headache about that. I just used Vector to store diffrent address and port. And when a meesage arrived, I will firstly make ajustment about whether the address and port had been stored, if not, I will add, otherwise I will ignore it. So I think it will be terrible that if thousands of clients connected to the server, how big Vector will be. So I want to know whether the Net package or DatagramSocket provided some kind of mechanism about broadcast messages for every interested client. Thanks. Here is my code below:
ChattingServer.java
* Created on 2005-4-16
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
// A server that echoes datagrams
import java.net.*;
import java.io.*;
import java.util.*;
* @author Kevin
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
public class ChattingServer {
     static final int INPUT = 1066;
     private byte[] buf = new byte[1000];
     private DatagramPacket dp = new DatagramPacket(buf, buf.length);
     private DatagramSocket socket;
     private Vector addrVector, portVector;
     public ChattingServer() {
          try {
               System.out.println("Chatting Server Started......");
               socket = new DatagramSocket(INPUT);
               System.out.println("The status is: " + socket.getBroadcast());
               addrVector = new Vector();
               portVector = new Vector();
               socket.receive(dp);
               addrVector.addElement(dp.getAddress());
               portVector.addElement(new Integer(dp.getPort()));
               System.out.println("The original size of addrVector: " + addrVector.size());
               System.out.println("The original size of portVector: " + portVector.size());
               String first = Transfer.toString(dp);
               System.out.println(first);
               System.out.println("The info: " + dp.getAddress() + ": " + dp.getPort());
               DatagramPacket echo = Transfer.toDatagram(first, dp.getAddress(), dp.getPort());
               socket.send(echo);
               while(true) {
                    socket.receive(dp);
                    System.out.println("A message recieved and prepare for broadcasting.....");
                    for(int i = 0; i < addrVector.size(); i++){
                         if(!((((InetAddress)(addrVector.elementAt(i))).toString() == (dp.getAddress()).toString()) && (((Integer)portVector.elementAt(i)).toString() == (new Integer(dp.getPort())).toString()))) {
                              System.out.println("Before adding element");
                              System.out.println("(InetAddress)(addrVector.elementAt(i)).toString(): " + ((InetAddress)(addrVector.elementAt(i))).toString() + ", dp.getAddress().toString(): " + (dp.getAddress()).toString());
                              System.out.println("(Integer)portVector.elementAt(i).toString(): " + ((Integer)portVector.elementAt(i)).toString() + ", (new Integer(dp.getPort())).toString()" + (new Integer(dp.getPort())).toString());
                              addrVector.addElement(dp.getAddress());
                              portVector.addElement(new Integer(dp.getPort()));
                    String info = dp.getAddress() + ": " + dp.getPort();
                    String rcvd = info + ": " + Transfer.toString(dp);
                    System.out.println(rcvd);
                    System.out.println("The size of addrVector is: " + addrVector.size());
                    System.out.println("The size of portVector is: " + portVector.size());
                    String echoString = Transfer.toString(dp);
                    for(int i = 0; i < addrVector.size(); i++) {
                         InetAddress tempAddr = (InetAddress)addrVector.elementAt(i);
                         int tempPort = Integer.parseInt(portVector.elementAt(i).toString());
                         System.out.println("The port is: " + tempPort);
                         echo = Transfer.toDatagram(echoString, tempAddr, tempPort);
                         socket.send(echo);
          } catch(SocketException e) {
               System.err.println("Can't open socket");
               System.exit(1);
          } catch(IOException e) {
               System.err.println("Communication error");
               e.printStackTrace();
     public static void main(String[] args) {
          new ChattingServer();
ChattingClient.java
* Created on 2005-4-16
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
// Tests the ChattingServer by starting multiple clients, each of which sends datagrams.
import java.lang.Thread;
import java.net.*;
import java.io.*;
* @author Kevin
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
class Sender extends Thread {
     private DatagramSocket s;
     private InetAddress hostAddress;
     public Sender(DatagramSocket s) {
          this.s = s;
          try {
               hostAddress = InetAddress.getByName(null);
          } catch(UnknownHostException e) {
               System.err.println("Can not find host");
               System.exit(1);
          System.out.println(" Welcome ChattingDemo..........");
          System.out.println("Please input your name： ");
     public void run() {
          try {
               String strSent;
               BufferedReader rd = new BufferedReader(new InputStreamReader(System.in));
               String name = rd.readLine();
               while(true) {
                    System.out.print(name + ": ");
                    strSent = rd.readLine();
                    if(strSent == "END") break;
                    s.send(Transfer.toDatagram(strSent, hostAddress, ChattingServer.INPUT));
                    sleep(100);
               System.exit(1);
          } catch(IOException e) {
          } catch(InterruptedException e) {
public class ChattingClient extends Thread {
     private static DatagramSocket s, srv;
     private byte[] buf = new byte[1000];
     private DatagramPacket dp = new DatagramPacket(buf, buf.length);
     public ChattingClient(DatagramSocket s) {
          this.s = s;
     public void run() {
          try {
               while(true) {
                    s.receive(dp);
                    String rcvd = Transfer.toString(dp);
                    System.out.println(rcvd);
                    sleep(100);
          } catch(IOException e) {
               e.printStackTrace();
               System.exit(1);
          }catch(InterruptedException e) {
     public static void main(String[] args) {
          try {
               srv = new DatagramSocket();
          } catch(SocketException e) {
               System.err.println("Can not open socket");
               e.printStackTrace();
               System.exit(1);
          new ChattingClient(srv).start();
          new Sender(srv).start();
}

Hello Amir,
ACS used to tie the license to the MAC address of the machine but I believe Cisco removed that in version 5.1 or 5.2 as users were facing with issues if the MAC changed on a virtual machine.
Other Cisco products, such as the ASA, Call Manger, and even ISE are a lot more restrictive when it comes to licensing. However, Cisco in general has many products that are licensed on the "honor system" where you are responsible for reporting and paying for everything that you are using.
Also, I suppose Cisco could audit any companies out there and figure out what the company is using vs what it actually paid for :)
I hope this helps!
Thank you for rating helpful posts!

Failure to Brodcast registration codes for "FREE" Courseware

I have attempted several times to retrieve the registration codes for courseware CD's included with THOMSON Course Technology books. Regardless of how I approach the problem the end result is the same - namely the website seemingly fails to process the requests and broadcast the 2 registration keys I need. I am a registered member of OTN and I am attending Hagerstown Community College, Hagerstown, MD where I am taking 2 courses in Oracle subject matter. I need these materials but can't seem to see any error I am making. Please help resolve this for me.
Thank you!!
My emil: [email protected]
Title: Guide to ORACLE9i
ISBN: 0-619-15959-6
Title: Oracle9i Database Administrator: Implementation and Administration
ISBN: 0-619-15900-6

I get this error as well. When the redeem code "works" I get a blank screen (but no option to download what I redeemed). When the code doesn't work, I get the error you posted.

IP address conflict help and setting up security code for access

Hi folks, I am about as non-technical as one can get. So I apologize in advance and thank you guys for your patience as everything you tell me will have to be spelled out for me.
Ques 1: I have one desk top computer with internet access through my cable TV provider. On it I have the Linksys WRT54G wireless router. We use two laptops.
Lately I've been getting an error message on my desktop saying there is an IP Address that is in conflict. My son often gets booted off line (on laptop) and so I'm guessing maybe it is his laptop that is in conflict. Please help me resolve this issue.
Quest 2: I would like to set up a security code for our wireless access so that other people will not be able to intrude upon our signal. Can someone walk me through this as well?
Thank you so much!
-Jen in NJ

The most common reason to get two identical IP addresses, is if you are using fixed LAN IP addresses incorrectly on your system.
Do you already use any fixed LAN IP addresses? If so, please state what fixed LAN IP addresses you are using, and also state your DHCP server range.
Rules for using fixed LAN IP addresses on Linksys routers:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.
Check all of your static LAN IP addresses. If you have violated any of the above rules for static LAN IP addresses, it could be the cause for your problem, and you should fix it before attempting any other router repairs or changes.
********* Wireless Security **********
Brfore proceeding with wireless security, you must get your IP address conflict problem solved. Please do the above first.
To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or the "Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default wireless settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2 in Win XP. Vista already supports WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

Creation of Transaction code for Reports created in FGI1.

Hi all,
   We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
   We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4. When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
   Appreciate your suggestion at the earliest.
Thanks
Dasa

Hi
Check TSTCP table for the existing t-codes and for creating check this link
Re: Transaction Code Creation for a Table/View
Regards
Pavan

Lost the content code for free up gradation of mountain lion. What to do ???

Lost the content code for free up gradation of mountain lion. What to do ???

https://discussions.apple.com/thread/4134740
Thread /w same question

Help with code for inserting horizontal scroll bar in photo gallery in Business Catalyst site?

Hi,
I am using Business Catalyst and Dreamweaver to create a trial site.
I am not sure if this is the correct forum to post this request but anyway I have inserted a photo gallery module at the bottom of the sidebar in the homepage of my test site.
Can anyone advise on whether jquery or any other code can be inserted into the page or module code that will replace the "next" hyperlink below the first 4 photos with a horizontal scroll bar at bottom of the gallery so users can just scroll through all 12 images ?
Kind Regards, Matt.
http://craftime-bs6.businesscatalyst.com/

Alyssa,
Have you tried putting this rule back as it was originally:
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto; /*was 9px*/
    color: #EF9CCF;
    background-color: #FFF;
That is, changing your 9px back to auto.
And giving us a link (as you did) is much better than printing out the code for us! Thanks!
Beth

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I generate redemption code for creative cloud?

how do I generate redemption code for creative cloud?

On October 27th 2014, you have purchased two CC (one complete &one photography) under the same Adobe ID. That is the reason you are being asked for a code because under one Adobe ID only one CC can be activated(twice).
Please contact Adobe Support or you can inbox me privately the CC order number that you would like to cancel.
You can also check if the host file has Adobe entry or not as if Adobe entries are there then also CC can ask for serial number. You can check the host by the followinh method.
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
Please refer to Creative Cloud applications ask for serial number
Hope it helps you.
Regards
Rajshree
Cannot license Illustrator CC after buying subscription

NI9203 - Need to know how to set up the FPGA code for multiple NI9203 modules and how to calibrate the data

Hi. I'm using the NI9203 module to detect pressure, temerature and flow rate of water in a cooling system. I have 17 different inputs coming in therefore i'm using 3 NI9203 modules. I've used the example provided with labview as a base for designing my code. The example can be found here : Program Files\National Instruments\LabVIEW 8.0\examples\CompactRIO\Module Specific\NI 9203.
I've had no problems when testing this code out for a single NI9203 module but when i add code for 3 modules the code will not compile as my resources are over mapped. Is there a simpler way to program the FPGA code.
That said how do you go about calibrating the data that's received from the module. Preferably i'd like to write a vi to do the calibrating. Just need help on how to go about writing this vi

Hi havok,
Firstly, I would use constants to configure the modules, it'll save some resources on the FPGA. I'm not typically changing the settings on the fly, so using constants whenever possible helps. I would also take a look at the following KnowledgeBase article on other changes you can make to the FPGA VI to compile the code:
http://digital.ni.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument
The best changes you can make are to use fewer arrays and front panel elements. This can be done by using a DMA FIFO or constants on the block diagram.
Now actually calibrating the data will require you to do it on the host side. There is an example VI called Binary to Nominal that changes the raw data to something more useful for datalogging, display, etc. It can be found in some of the example VIs, or in the following link:
http://digital.ni.com/public.nsf/allkb/E86D8D460C4C092F8625752F00050A61?OpenDocument

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Can not view the code for views, triggers or table definition

Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
Thanks

Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.

Batch code for running a find/replace all on multiple files within a source floder/directory

What I need is a Batch source code that will open all files in a folder/directory and run a find and replace_all query within them and then save all the files. The files were created in Illustrator and saved using the Scene7 FXG format extension.    These files will be uploaded into Scene7 as a group after the find and replace macro/query is run on the code. The same find and replace query will be the same for all the files. Basically this function or batch process will save time in setting the same parameters all at one time instead of having to set the parameters individually in scene7.
a source code sample of the find/replace module macro might be              searchString: s7:colorvalue="#FFFFFFFF"
                                                                                                                      replaceString: s7:colorValue="#&txtclr;"
                                                                                                                      searchWhat   "FXG document"
                                                                                                                         searchSource: true,
                                                                                                                    useRegularExpressions:   true
I have no problems creating batch files within Ai and PhotoShop but I have limited programming skills in how to create source code for manuipulating documents outside of those apps or in a OS invironment.
I could probably come up witha simple program to do what i want for one document but i get lost when dealing with multiple documents in a source folder (prolbem is, I will be dealing with thousands of documents not 100 or less)
If anything which Adope cloud app would work best: Dreamweaver or Edge code   (or just use my notepad)

What I need is a Batch source code that will open all files in a folder/directory and run a find and replace_all query within them and then save all the files. The files were created in Illustrator and saved using the Scene7 FXG format extension.    These files will be uploaded into Scene7 as a group after the find and replace macro/query is run on the code. The same find and replace query will be the same for all the files. Basically this function or batch process will save time in setting the same parameters all at one time instead of having to set the parameters individually in scene7.
a source code sample of the find/replace module macro might be              searchString: s7:colorvalue="#FFFFFFFF"
                                                                                                                      replaceString: s7:colorValue="#&txtclr;"
                                                                                                                      searchWhat   "FXG document"
                                                                                                                         searchSource: true,
                                                                                                                    useRegularExpressions:   true
I have no problems creating batch files within Ai and PhotoShop but I have limited programming skills in how to create source code for manuipulating documents outside of those apps or in a OS invironment.
I could probably come up witha simple program to do what i want for one document but i get lost when dealing with multiple documents in a source folder (prolbem is, I will be dealing with thousands of documents not 100 or less)
If anything which Adope cloud app would work best: Dreamweaver or Edge code   (or just use my notepad)

T-code for broadcasting

Similar Messages

Maybe you are looking for