T-codes for warehouse management
hi.
can anybody gives the mostly used t-codes for warehouse management
SAP WMS - Decentralized Warehouse Management System Integration Setup
You can operate the SAP Warehouse Management System (WMS) as a stand-alone decentralized system that is independent of a central Enterprise Resource Planning (ERP) System.
You make the necessary settings for the ERP (Enterprise Resource Planning) system within the WMS component (Warehouse Management System).
The steps are set up as a checklist and guide you through the process of configuring the system parameters.
Checklist (For those with the Table Views used transaction code SM30).
1. Customizing for "Enterprise Structure"
- Create storage location in OX09 (if necessary).
- Define warehouse number in Views V_T3001.
(you should not copy the warehouse number in the ERP system)
Activities within a warehouse, like goods movements and physical inventory, are assigned to a specific
warehouse number.
The physical warehouse where these activities take place is identified by the warehouse number.
- Assign plant/storage location to warehouse number in Views V_T320.
(Valid if the component MM-IM (Inventory Management) is implemented.)
Fields : Plant + Sloc + WhN
2. Customizing for "Decentralized WMS integration", section "Central processing" -> Application
- Activate decentralized WMS in Views V_T340DM.
- Define interface to Inventory Management in Views :-
V_156S_WM - Assign WM movement type references to IM movement types
V_T3211 - Delivery-Relevant Parameters for Reference Movement Type
V_T340DL - Delivery-Relevant Data for Warehouse Number
- Exclude stock in decentralized WMS in Views V_T321B
(if the decentralized WMS is not an SAP R/3 system)
- Finally do a consistency check for decentralised WMS in transaction OL20.
3. Customizing for "Application Link Enabling (ALE)", section "Basis Components"
Maintaining Logical Systems in Views V_TBDLS.
Assign logical system to client in Views T000.
4. Make basic settings for RFC in transaction BD97.(if necessary)
5. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model"
You can define the Reduce message types and Activate message types in transaction BD53.
SAP recommends that you use message types :
"MATMAS" (material master tables) and
"DEBMAS" (customer master) as a template.
Be aware that only those fields that are absolutely necessary are transferred from the master data tables in
the ERP system to the decentralized WMS.
6. Customizing for "Decentralized WMS integration", section "Central processing" -> Distribution
Use transaction OL19 to generate distribution model. As far as the application is concerned, when the model
is generated, application-specific Customizing parameters are modified or set (for example, activate
decentralized WMS).
Display or check distribution model
Generate partner profile in transaction BD82.
(you can also perform this activity using ALE Customizing)
Distribute distribution model in transaction BD64 (model view) using menu item "Edit"
If both the ERP system and the decentralized WMS are SAP R/3 systems, the distribution model should be
distributed on a central basis only, that is, via the ERP system.
7. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model" (transaction BD64)
Activate the change pointers for master data distribution using transactin BD61.
If necessary, reduce the message types concerned with transaction BD53.
8. Customizing for
"Logistics - General" - "Material Master" - "Tools" - "Data Transfer : Material Master" -
-> "Define required-field check for ALE/Direct Input" (Views V_T130S)
Define whether an error message should be generated in the receiving system for required fields
from the material master.
Reward points if useful.
Similar Messages
-
How to setup a company code for material management
Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DILHello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri -
EHSM Login / T.codes for Incident Management
Hi All,
I am a BW Consultant & got the requirement to develop the Incident Management Reports.
we have SAP standard Extractors for Incident Management to load the Data.
I want to know
1. I need to reconcile my bw report, what are the T.codes for Incident Management,
2. is EHSM is web based / SAP GUI based, if web based...how to login.
3. I have access to ECC where the EHSM is instaled, but I am very new & dont have Idea to login.
Please help me in this...since I dont have any functional consultant here.
THx,Dear Shaik ,
First you will have to ensure you have EHSM roles asssigned to you(i.e SAP_EHSM_MASTER or customized role of it)
Second :once you login select Health and Safety->Overview where you would be able to see incident and incident reports ; also you can select analytical reports to viewing BI data
Third:
Please find the list of data sources in RSA5
0EHSM_HSS_INC_REC Incident Management
0EHSM_HSS_INC_REC_01 Incidents
0EHSM_HSS_INC_REC_02 Injuries
0EHSM_HSS_INC_REC_03 Assets
0EHSM_HSS_INC_REC_04 Financial Transactions
0EHSM_HSS_INC_REC_05 Releases
0EHSM_HSS_INC_REC_06 Actions
0EHSM_HSS_INC_REC_07 Investigations
0EHSM_HSS_INC_REC_08 Risk Matrix
0EHSM_HSS_INC_REC_09 Notices of Violation
0EHSM_HSS_INC_REC_10 HCM Data
0EHSM_HSS_INC_REC-IO Incident Management Master Data
Thanks
GJ -
Extractors for Warehouse Management
Is anyone aware if there are any extractors for Warehouse Management. I am working on a Retail project? Thanks
Hi,
Check these links would help you,
BW Retail content
Re: BW retail content
Re: BW IS Retail
With rgds,
Anil Kumar Sharma .P -
Can anybody gives the BPP for warehouse management. and also qand db for the same
HI Ram,
could you pls forward the same to me also...my id is [email protected] / [email protected]
thnx..
SOUMYA -
What are all the Standard Data targets&Data source for Warehouse management
Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra -
Metalink Note for Warehouse Management System Testcase Repository
Hi Friends,
Please share the meatilink note id for Warehouse Management System Testcase/ Testscripts Repository.
Thanks and Regards,
Aif you have open transactions, such as deliveries, then you may not be able to process them further.
But do you really close all transactions in a test system?
It will not have any harm to new created documents -
Relation ship code for finding manager position..
Hi Experts,
How to find the relationship code for finding Manager position of France and US.
i know that
A012 is the relationship code for France,
What should be the relationship code for US?
Thanks in advance.Hi
If you take tables QMEL & DRAW / DRAW & QMFE
if u have created a document in CV01N, with the object link has notification... Then you will be able to able both these tables...
Document will be displayed...
Both has same relationships.... you have to maintain the notification in document management system.
Check out the linking details in SPRO - Cross-Application Components - Document Management - Control Data - Define Document types
- Pithan -
Q&A db for warehouse management and inventory management
Hello Everybody,
i read on the help.sap website that standard as well as industry specific versions of Q&A db are available. but the website doesnt say where. i searched a lot but the links dont lead to the actual Q&A db.
i would like to request you to kindly share the Q&A db for inventory management and warehouse management with me as i need it for preparing the AS IS documentation.(preferably automotive industry but if not then even standard Q&A db is fine).
thanks a lot.
sapman.Now QADB will not help to map the clinets requirement. Instead of QADB get AS IS information form Coreusers... thats best practice now....
Go through www.sap-img.com for further details...
Edited by: Ganti on Jul 26, 2008 7:26 AM -
FICO configuration for warehouse management
Hai ...
My company planning to use warehouse management.
Anyone can help me, what will be needed as the FICO configurations regarding warehouse management.
Please inform me where can I get the articles or any documents.
or just email me at [email protected]
Thanks,
Melissahi
see the below link for compleate config sof warehouse management
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf
nagesh -
User Exit for warehouse management - transfer order sorting
Hi,
I want to sort transfer order of warehouse management by user exit, which user exit I can use?
Kindly please advise.
RegardsHi,
I worked on the same object.
For sorting you have to place a button in the standard transaction,
I found some screen exits but they are not working.
Finally I developed the total customized transaction for that standard LM45.
If you have any doubts let me know. -
Help..Problem GI for Warehouse Management
Dear Expert,
I have a problem for GI process in warehouse management. When there are stock transfer material sloc non WM to sloc WM , user have to create transfer order and confirm transfer order to place material in storage bin. Otherwise, if user didn't create transfer order, material will stay in Storage Type 998 (AUFNAHME).
If there are GI process after that, for example GI to cost center, user still can issue material from Sloc even material hasn't placed into storage bin. Then material issued will stay in Storage Type 911 (GI Area for Cost Center).
Question is...how can i clear Storage Type 911 (GI area for Cost Center) after GI process??Is there any way i can restrict GI process so that user can't issue material which hasn't placed into storage bin (still in AUFNAHME)???
Help me please...
Rgds,
Aleluya.First of all:
It's strange that storage type 998 is used in your system for GR in transfer posting process - it is used for initial stock upload in standard system. Interim storage type 921 is used for SLoc-SLoc transfer posting.
Is there any way i can restrict GI process so that user can't issue material which hasn't placed into storage bin (still in AUFNAHME)???
In standard system not. Maybe through development you could do a check whether there're open TR for the material in connection with the interim storage type or you could check the quants for the interimn storage type...
But I think and strongly recommend you should not do this.
The process in SAP (process in ERP) and the physical process (moving the goods physically) should go paralelly. So, my opinion is that you should find out why the goods are not placed in storage bin in SAP whilst they are already in the bin physically. Maybe workers need training / workers have to keep to the rules / you have to revise the process/ use RF devices / etc.
Question is...how can i clear Storage Type 911 (GI area for Cost Center) after GI process
You can solve it (e.g.):
1. Manually, in the sort run: you move the suitable quant from the interim storage type used for SLoc-SLoc stock transfer (921) to interim storage type 911 by LT01 / LT10 (because you should have a +quant in 921 and a -quant in 911).
2. In the long run: e.g. you can set TR creation for your movement type and processing those TRs (from LB10) you will get the TO and realize the goods movement.
SPRO > LE > WM > Interfaces > IM > Define Movement Types > LE-WM Interface to Inventory Management
3. Immediate TO creation for these postings. Please sea OSS note 136796 if you are interested in this solution.
Regards,
Csaba
Edited by: Csaba Szommer on Jan 3, 2010 6:10 PM -
Sample code for Org Management
Hi,
I am new to Org Management coding in HR ABAP.
Can anybody post some simple sample code for Org. Management so that I can understand the flow of coding..
Thanks and Regards,
RamHi
see the sample code using Orgn management infotypes like HRP1000 etc
report zporgr0040
line-size 108
line-count 60(1)
no standard page heading
message-id zndc.
Database Tables
tables: hrp1001, " HR Master Record (Orgn. Assignment)
pa0002, " Personal Data
t528t, " Position Texts
t527x, " Org Unit Text
t528b, " Positions
csks, " Cost Center
cskt. " Cost Center Texts
Declaration of Internal Tables
Internal Table for Orgn Object Data HRP1000
data: begin of obj_tab occurs 0,
otype like hrp1000-otype, " Object Type
objid like hrp1000-objid, " Object ID
plvar like hrp1000-plvar, " Plan Version
istat like hrp1000-istat, " Planning Status
begda like hrp1000-begda, " Begin date
endda like hrp1000-endda, " End date
end of obj_tab.
Internal Table for Active Employees data PA0000
data: begin of stat_tab occurs 0,
pernr like pa0000-pernr, " Object Type
begda like pa0000-begda, " Begin date
endda like pa0000-endda, " End date
stat2 like pa0000-stat2, " Employment Status
end of stat_tab.
Internal Table for Actual Orgn Assignment Data PA0001
data: begin of act_tab occurs 0,
pernr like pa0001-pernr, " Object Type
begda like pa0001-begda, " Begin date
endda like pa0001-endda, " End date
kostl like pa0001-kostl, " Cost Center
orgeh like pa0001-orgeh, " Org Unit
plans like pa0001-plans, " Position
natio like pa0002-natio, " Nationality
end of act_tab.
Internal Table for Orgn Data HRP1001
data: begin of org_tab occurs 0,
otype like hrp1001-otype, " Object Type
objid like hrp1001-objid, " Object ID
plvar like hrp1001-plvar, " Plan Version
istat like hrp1001-istat, " Planning Status
begda like hrp1001-begda, " Begin date
endda like hrp1001-endda, " End date
subty like hrp1001-subty, " Sub Type
sclas like hrp1001-sclas, " Type of Related Object
sobid like hrp1001-sobid, " Id of Related Object
kostl like pa0001-kostl, " Cost Center
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of org_tab.
Internal Table for Position Calculations
data: begin of org1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
objid like hrp1001-objid, " Object ID
end of org1_tab.
Internal Table for Position Calculations
data: begin of org2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count type i, " No of Positions
end of org2_tab.
Internal Table for Actual Manpower Calculations
data: begin of act1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
plans like pa0001-plans, " Position
end of act1_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act2_tab.
Internal Table for Actual Manpower Calculations(Others)
data: begin of act3_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act3_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act4_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count1 type i, " No of Positions(UAE)
end of act4_tab.
Internal Table for Actual Manpower Calculations(OTHERS)
data: begin of act5_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count2 type i, " No of Positions(Others)
end of act5_tab.
Internal Table for Vaccancies Data
data: begin of vac_tab occurs 0,
plvar like hrp1007-plvar, " Plan Version
otype like hrp1007-otype, " Object Type
objid like hrp1007-objid, " Object ID
istat like hrp1007-istat, " Planning Status
begda like hrp1007-begda, " Begin date
endda like hrp1007-endda, " End date
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
end of vac_tab.
Internal Table to store the Report Output data
data : begin of rep_tab occurs 0 ,
kostl(10) type n, " Cost Cente
plans like pa0001-plans, " Position
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of rep_tab.
Internal Table to store the Report Output data
data : begin of rep1_tab occurs 0 ,
kostl(10) type n, " Cost Cente
cnt type i, " No of Vacancies
end of rep1_tab.
Internal Table to store the Report Output data
data : begin of rep2_tab occurs 0 ,
kostl(10) type n, " Cost Cente
app_no type i, " Approved
nat_no type i, " National
exp_no type i, " Expatriate
tot_no type i, " Total
vac_no type i, " Vacancies
end of rep2_tab.
Declaration of Variables
data: v_sobid like hrp1001-sobid, " Object Id
v_sobid1 like hrp1001-sobid, " Object Id
v_sobid2 like hrp1001-sobid, " Object Id
v_sclas like hrp1001-sclas, " Related Obj Type
v_subty like hrp1001-subty, " Related Object Id
v_otype like hrp1007-otype, " Object Type
v_str(9) type c, " Text
v_str1(10) type c, " Text
v_cnt like sy-tabix. " Table Index
Declaration of Constants
constants : c_x type c value 'X', " Flag
c_stat1 like pa0000-stat2 value '3', " Emp Status
c_plan like hrp1001-plvar value '01', " Plan Version
c_name like hrp1000-uname value 'SAP', " Uname
c_uae like pa0002-natio value 'AE', " Country
c_type like hrp1007-otype value 'O', " Object Type
c_otype like hrp1007-otype value 'S', " Object Type
c_stat like hrp1007-status value '0', " Status
c_pstat like hrp1007-istat value '1', " Plang Status
c_sclas like hrp1001-sclas value 'K', " Rel. Obj Type
c_subty like hrp1001-subty value 'A002', " Related ObjId
c_subty2 like hrp1001-subty value 'A003', " Related ObjId
c_sclas1 like hrp1001-sclas value 'O', " Rel.Obj Type
c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
c_kokrs like coej-kokrs value '1000'. " Controlling Area
Selection Screen
selection-screen begin of block b1 with frame title text-001.
parameters :
p_date like pa0001-begda obligatory default sy-datum. " Date
select-options :
s_kostl for csks-kostl, " Cost Center
s_plans for t528b-plans. " Position ID
selection-screen end of block b1.
At selection-screen
at selection-screen.
Validate the Selection Screen fields
perform validate_screen.
Start-of-Selection
start-of-selection.
Get the Orgn data from database Table HRP1001
perform get_org_data.
Get the Actual Manpower from PA0001
perform get_act_data.
Get the Vaccancies data from database Table HRP1007
perform get_vac_data.
Append the data into final Internal Table
perform append_data.
Top-of-page
top-of-page.
Write the Report and Column Headings
perform top_of_page.
End-of-Page
end-of-page.
write /1(108) sy-uline.
End-of-Selection
end-of-selection.
Display the Output Report.
perform display_report.
Form-Routines
*& Form validate_screen
Validation of selection Screen fields
form validate_screen.
Validation of Position ID
clear t528b.
if not s_plans[] is initial.
select single plans
into t528b-plans
from t528b
where plans in s_plans.
if sy-subrc <> 0.
message e999 with 'Invalid Position ID'(009).
endif.
endif.
Validation of Cost Center
clear csks.
if not s_kostl[] is initial.
select single kostl
into csks-kostl
from csks
where kostl in s_kostl.
if sy-subrc <> 0.
message e999 with 'Invalid Cost Center'(008).
endif.
endif.
endform. "validate_screen
*& Form get_org_data
Get the Orgn Data from Database Table HRP1001
form get_org_data.
v_str = 'Developee'(002).
v_str1 = 'Deployment'(003).
Select All the Positions from HRP1000
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
into table obj_tab
from hrp1000
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
objid in s_plans and
uname ne c_name.
sort obj_tab by otype objid.
Get the Orgn and Cost Center for all the above Positions
if not obj_tab[] is initial.
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
subty " Sub Type
sclas " Type of Related Object
sobid " Id of Related Object
into table org_tab
from hrp1001
for all entries in obj_tab
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq c_sclas1 and
subty eq c_subty2 and
objid eq obj_tab-objid.
endif.
sort org_tab by otype objid.
Get the Cost Center
loop at org_tab.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
org_tab-kostl = hrp1001-sobid+0(10).
else.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
else.
v_otype = c_otype. " S
v_sclas = c_otype. " S
v_subty = c_subty. " A002
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
endif.
endif.
Get the Position Text
clear t528t.
select single plstx from t528t into t528t-plstx
where sprsl = sy-langu and
otype = c_otype and
plans = org_tab-objid.
org_tab-plstx = t528t-plstx.
Get the Org Unit Text
clear t527x.
select single orgtx from t527x into t527x-orgtx
where sprsl = sy-langu and
orgeh = org_tab-sobid+0(8).
org_tab-orgtx = t527x-orgtx.
modify org_tab index sy-tabix.
clear v_sobid.
endloop.
sort org_tab by otype objid.
Calculate the Approved No of Positions
loop at org_tab.
if org_tab-kostl in s_kostl.
move-corresponding org_tab to org1_tab.
append org1_tab.
clear org1_tab.
endif.
endloop.
sort org1_tab by kostl objid.
clear v_cnt.
loop at org1_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
org2_tab-kostl = org1_tab-kostl.
org2_tab-count = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append org2_tab.
clear:org2_tab.
endat.
endloop.
sort org2_tab by kostl.
endform. "get_org_data
*& Form get_act_data
Get the Actual Manpower Data from Database Table PA0001
form get_act_data.
clear : stat_tab, act_tab.
refresh: stat_tab, act_tab.
Get all the Active Employees
select pernr " Object Type
begda " Begin date
endda " End date
stat2 " Emp Status
into table stat_tab
from pa0000
where stat2 eq c_stat1 and
begda le p_date and
endda ge p_date.
sort act_tab by pernr.
if not stat_tab[] is initial.
select pernr " Object Type
begda " Begin date
endda " End date
kostl " Cost Center
orgeh " Org Unit
plans " Position
into table act_tab
from pa0001
for all entries in stat_tab
where pernr eq stat_tab-pernr and
kostl in s_kostl and
plans in s_plans and
persg eq '1' and
begda le p_date and
endda ge p_date.
endif.
sort act_tab by pernr.
loop at act_tab.
move-corresponding act_tab to act1_tab.
clear pa0002-natio.
select single natio into pa0002-natio from pa0002
where pernr = act_tab-pernr.
if sy-subrc = 0.
act1_tab-natio = pa0002-natio.
endif.
append act1_tab.
clear act1_tab.
endloop.
sort act1_tab by kostl natio.
Calculate the Local and Expatriate Manpower
loop at act1_tab.
if act1_tab-natio = c_uae.
act2_tab-kostl = act1_tab-kostl.
act2_tab-natio = act1_tab-natio.
else.
act3_tab-kostl = act1_tab-kostl.
act3_tab-natio = act1_tab-natio.
endif.
append: act2_tab, act3_tab.
clear : act2_tab,act3_tab.
endloop.
sort act2_tab by kostl.
sort act3_tab by kostl.
Actual UAE Manpower
clear v_cnt.
loop at act2_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act4_tab-kostl = act2_tab-kostl.
act4_tab-count1 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act4_tab.
clear:act4_tab.
endat.
endloop.
sort act4_tab by kostl.
Other Countries
clear v_cnt.
loop at act3_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act5_tab-kostl = act3_tab-kostl.
act5_tab-count2 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act5_tab.
clear:act5_tab.
endat.
endloop.
sort act5_tab by kostl.
endform. "get_act_data
*& Form get_org
Get the Cost Center from Parent Org Id
form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
clear hrp1001.
select single * from hrp1001
where otype = p_v_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq p_v_sclas and
subty eq p_v_subty and
objid eq p_v_sobid.
v_sobid = hrp1001-sobid+0(8).
endform. " get_org
*& Form get_vac_data
Get the Vaccancies Data from Database Table HRP1007
form get_vac_data.
if not org_tab[] is initial.
select plvar " Plan Version
otype " Object Type
objid " Object ID
istat " Planning Status
begda " Begin date
endda " End date
vacan " Vacancy Indicator
status " Status of Vacancy
into table vac_tab
from hrp1007
for all entries in org_tab
where plvar = c_plan and
otype = c_otype and
istat eq c_pstat and
objid = org_tab-objid and
begda le p_date and
endda ge p_date and
vacan eq c_x and
status eq c_stat.
endif.
sort vac_tab by plvar otype objid.
Get the HR data into the rep_tab Internal Table
loop at vac_tab.
rep_tab-plans = vac_tab-objid.
rep_tab-vacan = vac_tab-vacan.
rep_tab-status = vac_tab-status.
read table org_tab with key objid = vac_tab-objid.
if sy-subrc = 0.
rep_tab-kostl = org_tab-kostl.
rep_tab-plstx = org_tab-plstx.
rep_tab-orgtx = org_tab-orgtx.
endif.
append rep_tab.
clear rep_tab.
endloop.
loop at rep_tab.
if not rep_tab-kostl in s_kostl.
delete rep_tab index sy-tabix.
endif.
endloop.
sort rep_tab by kostl plans.
delete rep_tab where plstx cs v_str.
delete rep_tab where orgtx cs v_str1.
Calculate the Count of Vacancies in each Division
clear v_cnt.
loop at rep_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
rep1_tab-kostl = rep_tab-kostl.
rep1_tab-cnt = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append rep1_tab.
clear:rep1_tab.
endat.
endloop.
sort rep1_tab by kostl.
endform. "get_vac_data
*& Form append_data
Append the data into final Internal Table
form append_data.
loop at org2_tab.
rep2_tab-kostl = org2_tab-kostl.
rep2_tab-app_no = org2_tab-count.
read table act4_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-nat_no = act4_tab-count1.
endif.
read table act5_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-exp_no = act5_tab-count2.
endif.
read table rep1_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-vac_no = rep1_tab-cnt.
endif.
rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
append rep2_tab.
clear rep2_tab.
endloop.
sort rep2_tab by kostl.
endform. "append_data
*& Form top_of_page
Write the Report and Column Headings
form top_of_page.
skip.
format color col_heading on.
write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
/1(108) 'Summary of Manning Level Report'(011) centered.
format color off.
skip.
write: /2 'Key Date :'(013), p_date,
75 'Report Run Date:'(041), sy-datum.
if not s_kostl[] is initial.
if s_kostl-high is initial.
write: /2 'Cost Center :'(023), s_kostl-low,
75 'Time :'(042), sy-uzeit.
else.
write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
'To'(022), s_kostl-high,
75 'Time :'(042), sy-uzeit.
endif.
else.
write: /75 'Time :'(042), sy-uzeit.
endif.
if not s_plans[] is initial.
if s_plans-high is initial.
write: /2 'Position Id :'(019), s_plans-low,
75 'User :'(043), sy-uname.
else.
write: /2 'Position Id From:'(021), s_plans-low,
'To'(022), s_plans-high,
75 'User :'(043), sy-uname.
endif.
else.
write: /75 'User :'(043), sy-uname.
endif.
write: /75 'Page No :'(044), sy-pagno.
skip.
write /1(108) sy-uline.
format color col_heading.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(32) 'Actual'(018) centered,
97 sy-vline,108 sy-vline.
write:/1 sy-vline, 2(10) 'CostCenter'(014),
12 sy-vline, 13(40) 'Description'(026) centered,
53 sy-vline, 54(10) 'Approved'(025) centered,
64 sy-vline, 65(32) sy-uline,
97 sy-vline, 98(10) 'Vacancies'(017),
108 sy-vline.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(10) 'National'(015) centered,
75 sy-vline, 76(10) 'Expatriate'(020) centered,
86 sy-vline, 87(10) 'Total'(016) centered,
97 sy-vline,108 sy-vline.
format color off.
write /1(108) sy-uline.
endform. "top_of_page
*& Form Display_report
Write the Report Output
form display_report.
if rep2_tab[] is initial.
message i999 with
'No Data found for the entered Selection'(035).
else.
loop at rep2_tab.
Authorization Check for the Orgn and Cost Centers
perform auth_check_org.
if sy-subrc = 0.
clear cskt.
select single ltext into cskt-ltext from cskt
where spras = sy-langu and
kokrs = c_kokrs and
kostl = rep2_tab-kostl.
format color col_normal.
write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
12 sy-vline, 13(40) cskt-ltext,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
at last.
sum.
format color 3.
write /1(108) sy-uline.
write: /1 sy-vline, 2(10) 'Total'(027),
12 sy-vline,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
endat.
endif.
endloop.
endif.
write /1(108) sy-uline.
endform. " Display_report
*& Form auth_check_org
Authorization Check for the Orgn and Cost Center
form auth_check_org.
authority-check object 'ZNDCHROM'
id 'PLVAR' dummy
id 'OTYPE' dummy
id 'KOSTL' field rep2_tab-kostl.
endform. "auth_check_org
<b>Reward points for useful Answers</b>
Regards
Anji -
Master data for warehouse management
Hi experts what are the master data for the warehouse
management module.............Hi
Sending you all the table for the warehouse mangement.
Inventory document
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
LINK Inventory document header in WM
LINP Inventory document item in WM
LINV Inventory data per quant
Storage locations and stocks
LAGP Storage bins
LEIN Storage unit header records
LQUA Quants
LQUAB Total quant counts for certain strategies
MEIK Make-to-Order Stock for Customer Order
MSCA Sales Orders on Hand with Vendor
MSKA Sales Order Stock
MBPR Stock at Production Storage Bin
MLGN Material Data per Warehouse Number
MLGT Material Data per Storage Type
Rewards if useful.
with regards
Nikunj Shah -
Bare minimum configuration for warehouse management
Hello,
For one of our Projects, there is a requirement of Warehouse Management merely just to enable the tracking of Material received to the Storage Bin level, as they manage the Inventory in Storage Bins in the existing Warehouses.
Other no major requirement is expected from WM like, automation of Putaway, etc.
Few of the Inventory scenarios are like Goods receipt, Goods Issue, Warehouse to Warehouse transfer, Bin to Bin transfer, Physical Inventory, Subcontracting for repairs, Vendor Consignment, also they will handle Project Special stock.
Now the configurations for Inventory Management are enabled for all the above processes. I now need to know, what are the bare mimimum configurations required so as to enable the WM related process, following each of the IM processes, like Putaway after Goods Receipt, Stock removal before Goods Issue, etc.
The Configuration for the Enterprise Structure to support Warehouse Management have been completed by creating the Warehouses & assigning the Storage locations to these Warehouses.
A detailed step by step process would be very helpful for me at this stage.
And i surely will assign points for all the useful answers.
Regards,
Zafar.Hi,
If you want to define new storage types other than the standard ones, please define them. Otherwise, you can assign
the existing storage types to the newly defined warehouse.
Also you have to define storage bin types and storage bin structures.
All this you can find under the IMG path:
SPRO->Logistics Execution->Warehouse Management->Master Data.
Regards,
Pavani.
Maybe you are looking for
-
WAN MINIPORT ERROR AND TAKES A LONG TIME TO SHUT DOWN
Few days before,my device manager was showing yellow exclamation mark in wan miniport(ikev2),SSTP and another area, which i can't remember.So i searched on forums and use another software to fix this.The link to website is - https://www.vpnhosting.
-
PO number not appearing in Purchasing Document number
Hi I have posted a MIRO. PO number: 4500000013. Now when i see in FBL1N & vendor open items, PO number does not appear in Purchasing Document field. Let me know how to bring the PO number. Edited by: Deepak Agrawal on Oct 8, 2009 11:50 AM
-
How to define MDM real data type in ABAP ?
Hi, I want to fetch MDM Repository data using MDM API . I am strugling as one field in MDM is of real type . Please tell me how I could define Real data type field in ABAP ? Thanks. Sandesh
-
What is the sample rate of voice memos?
I often record lectures via Evernote audio notes on my iTouch. I want to convert those audio files to text. A piece of software named, MacSpeech Scribe has caught my eye. A review states, "a minimum sampling rate of 11.025khz" is needed for the co
-
How to uninstall os Lyon Server ?
Well, my question is the title.. Thanks !!