T5 - Totally Dead - Need to Retrieve Data

The last time I was able to use my T5, the screen slowly went blank by showing vertical lines until it was totally unreadable. Now it is dead and will not power-up. I backed up the T5 on my PC when I saw that it was becoming inoperable. However, unbeknownst to me, my SplashID desktop was missing and so when I backed up that last time, it didn't include all the data in SplashID... So, I'd like to power-up one more time so that the data in SplashID goes to the PC. Should I send it into Palm so that they can retrieve the data? Any ideas?
Post relates to: Tungsten T5
This question was solved.
View Solution.

Well I don't ever recommend a Cust doing that. The process of replacing a battery on one of the sealed units is very delicate and often involves unsoldering connections. Doing this wrong can completely kill the device. Unless you are skilled in that area and are prepared to face a nonrepairable device it's best to send the this in for repair. Again besides Palm other venders offer repair services.
Post relates to: None

Similar Messages

Need to retrieve data from IBM Travelstar Hard drive from G3 Powerbook

The only problem is the G3 I had is broken, i now have a Macbook Pro Intel and need to retrieve the data from the old Hard drive.
I have removed the drive from the G3 but is it possible to connect it to my Macbook pro?
I'm considering buying an old G3 and fitting it to that then using target mode to retrieve the files.
Mac Book Pro 17" Intel Mac OS X (10.4.7)

The most cost-effective solutions may be one of the external drive adapters such as the one from Newer Tech.
I'm considering buying an old G3 and fitting it to that then using target mode
Just FYI, G3s do not support target disk mode. You'd have to have an AGP G4 or later.

What kind of enclosure do I need to retrieve data

I have pulled the hard drive from my dead PB12 and need an enclosure with a firewire connection so that I can try to retrieve the data on the drive. Does anyone know what kind of enclosure I should purchase?
powerbook 12 g-4 Mac OS X (10.4.6) macbook 15 os 10.4.8

Welcome to the Apple discussions.
OWC has a number of firewire units at http://eshop.macsales.com/shop/hard-drives/External-Enclosures/ . Scroll down to the 2.5" firewire enclosures. If it were me, I'd get one which uses the Oxford chipset, as I've used several external enclosures with Oxford chipsets, and they have all worked with no issues. Although you shouldn't run into the power issues that some USB-based drives run into, a nice option is to be able to use an external power supply, if needed.

What kind of sata interface do i need to retrieve data from mac 2009

ATTENTION MAC GEEKS!!! My warranty has run out on my macbook and I have a corrupted hard-drive. After mistaking the display adapter port on my macbook 2009 for a thunderbolt port (wishful thinking on my part) I finally realized this version of macbook does not have any type of firewire OR thunderbolt port, and neither does the mac I borrowed to use as a target drive through which to run data rescue software. I did come across some people saying they used ethernet to interface the two macs, so after trying forever to set that up with no luck I found references to a "migration" applet that I would need to download to both computers. Since one has a damaged hard drive and will only boot from the install disk (but cannot be repaired with it), I can't exactly download the "migration" applet and the support documentation for my data rescue software states that an ethernet connection will not work at all anyway! Unfortunately my time machine died about six months ago, and all I really, really, really REALLY want is access to my documents folder on the macbook with the corrupted/damaged hard drive. The software documentation does say that a SATA connection will work and allow my second mac to scan the broken mac h/d. I've come across some usb - sata connections, but have also come across articles saying that using any form of usb connection to run a scan on a h/d won't work as usb (older usb, probably 2.0) is too slow. Darn, darn darn. I hadn't wanted to open the macbook if I didn't have to, but as I have to I will. However I don't feel comfortable making a sata to sata connection between the two drives as the second machine does not belong to me. How should I approach this? I am just sooo.....grrr about the missing ports on these Macbooks. I really hadn't notices as I never had to do this before! Any suggestions/help would be appreciated !!! would it work using this usb/sata connection? And so I don't get even more surprises, do all sata work on all h/d's? I used to network and maintain pc's, even setting up secondary h/d's but those were desktops and it was a few years ago, AND everything Apple just seems so...proprietary to me. PLEASE HELP!!!

You can replace the internal disk with a new one and then reinstall the operating system. As you do that, save the corrupted drive and place it in an external enclosure which you then plug into your working MacBook. You can then try to salvage data off of the corrupted disk (if possible).
For a new internal disk you might as well purchase a 1 TB fast hybrid SSD-disk since it only costs $105 and will speed up your system considerably. The following reference will include the external enclosure you will need into which you can put the corrupted disk. http://eshop.macsales.com/item/Toshiba/YTOS1TBHYS/ . You can find instructions for the repair at http://www.ifixit.com/Device/Mac_Laptop.
If the corrupt will spin any you cannot retrieve the files using the Finder then try using DiskWarrior, uFlysoft, or McAfee Data Recovery for Mac.
          http://www.alsoft.com/diskwarrior/
          http://www.uflysoft.com/
          http://mcaf.ee/x0pfi
Once it is in the external enclosure, if it won’t spin give it a gentle tap on a table and see if it will. I have revived several disk drives that way.

Help needed in retrieving data

Hi,
I have a table
ego_attrs which stores column names of a table ego_mtl_sy_items_ext_b.
ego_attrs ego_mtl_sy_items_ext_b
col1 col1 col2 col3
col2 x1 x2 x3 (Data)
col3
I'm supposed to retrieve the column names from ego_attrs and compare with the columns of ego_mtl_sy_items_ext_b table and retrieve the entire row and update another table(cn_comm_lines_api_all) by the data extracted from ego_mtl_sy_items_ext_b table. Can anyone help me on this.
Thanks,

This may not be the correct answer. But I think it is possible with the help of functions (which returns the primary key of the table), retrieve the data with that primary key and with the help of execute immediate statements you can update the row.
store the values in some variables and insert those values in your new table.

Screen broken. Help needed to retrieve data.

Hello.
I hate to be a pain, however recently I broke the screen of my Nokia N97 Mini (both display and touch are broken. completely buggered I'm afraid)
The keypad still works, however, I just can't see anything.
Now I've just ordered a Lumia 900, however before it arrives I want to figure out how to transfer all my text messages, contacts and so on from the old phone to the new one. Does anyone have any suggestions? Places I should go or accessories I could buy?
I know that when I moved from my E72 to the N97 there was a program which did it all for me, does the Lumia come with the same program, and if so, how do I access the N97 side of things without a screen? Thanks again for any help.
Jess.
Solved!
Go to Solution.

Hi Essjay32,
Welcome to Nokia Support Discussions!
What you could do is to install the latest Nokia Suite beta, which can upload your contacts to Skydrive. When you get your Lumia 900, you can just use that Microsoft account as your main account and the contact data should be there waiting for you. Unfortunately, it is not possible to transfer your messages to a Lumia phone, you can however store your existing messages on Nokia Suite.
When connecting your phone to your computer (using a USB cable), press the menu button, as it will set up your phone in Nokia Suite mode. After this you should be able to access your phone data and upload it to Skydrive.
Hope this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Need info on data retrieval

1.I have an internal table it_vbak with fields vbeln & auart
2. Select-options: s_auart for vbak-auart
3. I need to retrieve data into it_vbak with the following condition :
VBAK-VBELN = VBFA-VBELV and
VBFA-VBELN = LIKP-VBELN and
( VBTYP_N = 'J' or VBTYP_N ) and
(VBTYP_V ='C' or VBTYP_V ='I') and VBAK-AUART in s_auart.
If I use Inner Join I can't use in s_auart.
...Please let me know

hi,
make use of for all entries
first fetch the data from vbak where auart in s_auart(it_vbak_
and the pass it to vbfa(it_vbfa)using for all entries
the pass vbfa to likp using for all entries(it_likp)
then take one final internal table (it_final) and populate final internal table.
check this example for reference: my requirement si little bit different
*& Report ZRSDREPORT
REPORT ZRSDREPORT LINE-SIZE 230
 NO STANDARD PAGE HEADING
 MESSAGE-ID ZZ.
Author : Sudha Rani Pathuri *
Date : 07/04/2007 *
Title : DELIVERY STATUS REPORT *
Program Type : Executable Program *
Tables Used: : VBAK,VBAP,LIKP,LIPS,VBFA,VBUP *
Purpose : This report gives the status od the delivery *
 based on sales order data *
*& TABLES DECLARATION *
TABLES : VBAK,VBPA,LIKP.
declaraing TYPEPOLL SLIS *
TYPE-POOLS : SLIS.
*& SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN :SKIP 2.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG NO-EXTENSION,
 S_VTWEG FOR VBAK-VTWEG NO-EXTENSION,
 S_SPART FOR VBAK-SPART NO-EXTENSION,
 S_KUNNR FOR VBPA-KUNNR,
 SO_KUNNR FOR VBPA-KUNNR,
 S_VBELN FOR LIKP-VBELN NO-EXTENSION,
 S_ERDAT FOR LIKP-ERDAT OBLIGATORY NO-EXTENSION,
 SO_ERDAT FOR VBAK-ERDAT NO-EXTENSION.
SELECTION-SCREEN :SKIP 2.
SELECTION-SCREEN END OF BLOCK B1.
*& TYPES DECARATION *
*--types declaration for capturing vbeln from vbak
TYPES : BEGIN OF TY_VBELN,
 VBELN TYPE VBELN, "Sales Doc No
 END OF TY_VBELN,
*--types declaration for vbap
 BEGIN OF TY_VBAP,
 VBELN LIKE VBAP-VBELN, "Sales Document
 POSNR LIKE VBAP-POSNR, "Sales Document Item
 MATNR LIKE VBAP-MATNR, "Material Number
 KWMENG LIKE VBAP-KWMENG, "Cumulative order quantity in
 "sales units
 KDMAT LIKE VBAP-KDMAT, "Material Number Used by Customer
 END OF TY_VBAP,
*--types declaration for vbfa
 BEGIN OF TY_VBFA,
 VBELV LIKE VBFA-VBELV, "Preceding sales and distribution
 "document
 POSNV LIKE VBFA-POSNV, "Preceding item of an SD document
 VBELN LIKE VBFA-VBELN, "Subsequent s and d document
 POSNN LIKE VBFA-POSNN, "Subsequent item of an SDdocument
 END OF TY_VBFA,
*--types declaration for likp
 BEGIN OF TY_LIKP,
 VBELN LIKE LIKP-VBELN, "Delivery no
 END OF TY_LIKP,
*--types declaration for lips
 BEGIN OF TY_LIPS,
 VBELN LIKE LIPS-VBELN, "Delivery
 POSNR LIKE LIPS-POSNR, "Delivery item
 MATNR LIKE LIPS-MATNR, "Material Number
 LFIMG LIKE LIPS-LFIMG, "Actual quantity delivered (in
 sales units)
 vgbel LIKE lips-vgbel, "Document number of the reference
 "document
 END OF TY_LIPS,
*--types declaration for vbup
 BEGIN OF TY_VBUP,
 VBELN LIKE VBUP-VBELN, "Sales and Distribution Document
 "Number
 POSNR LIKE VBUP-POSNR, "Item number of the SD document
 LFSTA LIKE VBUP-LFSTA, "Delivery status
 WBSTA LIKE VBUP-WBSTA, "Goods movement status
 FKSTA LIKE VBUP-FKSTA, "Billing status of delivery
 "related billing document
 END OF TY_VBUP,
*--types declaration for final internal table for diplaying purpose
 BEGIN OF TY_FINAL,
 VBELN(10) TYPE C,
 POSNR LIKE VBAP-POSNR,
 MATNR LIKE VBAP-MATNR,
 KWMENG LIKE VBAP-KWMENG,
 KDMAT LIKE VBAP-KDMAT,
 VBELN1 LIKE LIKP-VBELN,
 POSNR1 LIKE LIPS-POSNR,
 LFIMG LIKE LIPS-LFIMG,
 MATNR1 LIKE LIPS-MATNR,
 DS(25) TYPE C,
 END OF TY_FINAL.
*& CONSTANTS DECARATION *
CONSTANTS: C_DTYPE TYPE C VALUE 'J'.
*& INTERNAL TABLE DECARATION *
DATA : I_VBELN TYPE STANDARD TABLE OF TY_VBELN WITH HEADER LINE,
 I_VBAP TYPE STANDARD TABLE OF TY_VBAP WITH HEADER LINE,
 I_VBFA TYPE STANDARD TABLE OF TY_VBFA WITH HEADER LINE,
 I_LIKP TYPE STANDARD TABLE OF TY_LIKP WITH HEADER LINE,
 I_LIPS TYPE STANDARD TABLE OF TY_LIPS WITH HEADER LINE,
 I_VBUP TYPE STANDARD TABLE OF TY_VBUP WITH HEADER LINE,
 I_FINAL TYPE STANDARD TABLE OF TY_FINAL WITH HEADER LINE.
*& FIELDCATALOG DECARATION *
DATA : I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
 LT_SORT TYPE SLIS_T_SORTINFO_ALV,
 I_LAYOUT TYPE SLIS_LAYOUT_ALV.
*& START-OF-SELECTION *
START-OF-SELECTION.
*--for fetching slaes and delivery data
PERFORM GET_DATA.
*--populating the data into one internal table for output
PERFORM POPULATE_FINAL.
*--for displaying the data using alv
PERFORM CALL_ALV.
*& Form get_data
FORM GET_DATA .
*--for retrieving vbeln from VBAK or VbAP
PERFORM GET_VBELN.
*--retrieving data from VBAP
PERFORM GET_VBAP.
*--fetching delivery document details using VBFA.
PERFORM GET_VBFA.
*--fetching delivery data from LIKP
PERFORM GET_LIKP.
*--fetching delivery data from LIPS
PERFORM GET_LIPS.
*--fetching data from VBUP
PERFORM GET_VBUP.
ENDFORM. " get_data
*& Form get_vbeln
FORM GET_VBELN .
*--retrieving vbeln from either VBAK or VBPA
*--checking whether payer or sold to values in the selection-screen or
 give or not
IF S_KUNNR IS INITIAL OR SO_KUNNR IS INITIAL.
*--select statement for retrieving vbeln from vbak
 SELECT VBELN
 FROM VBAK
 INTO TABLE I_VBELN
 WHERE VKORG IN S_VKORG AND
 VTWEG IN S_VTWEG AND
 SPART IN S_SPART AND
 ERDAT IN S_ERDAT.
 IF SY-SUBRC = 0.
 SORT I_VBELN BY VBELN.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 STOP.
 LEAVE LIST-PROCESSING.
 ENDIF.
ELSE.
*--select statement for retrieving data from vbpa
 SELECT VBELN
 FROM VBPA
 INTO TABLE I_VBELN
 WHERE KUNNR IN S_KUNNR OR
 KUNNR IN SO_KUNNR.
 IF SY-SUBRC = 0.
 SORT I_VBELN BY VBELN.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 LEAVE LIST-PROCESSING.
 ENDIF.
ENDIF.
ENDFORM. " get_vbeln
*& Form get_vbap
FORM GET_VBAP .
IF I_VBELN[] IS NOT INITIAL.
*--select statement for retrieving data from vbap
 SELECT VBELN
 POSNR
 MATNR
 KWMENG
 KDMAT
 FROM VBAP
 INTO TABLE I_VBAP
 FOR ALL ENTRIES IN I_VBELN
 WHERE VBELN = I_VBELN-VBELN.
 IF SY-SUBRC = 0.
 SORT I_VBAP BY VBELN POSNR.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 STOP.
 LEAVE LIST-PROCESSING.
 ENDIF.
ENDIF.
ENDFORM. " get_vbap
*& Form get_vbfa
 text
--> p1 text
<-- p2 text
FORM GET_VBFA .
*--select statement to retrieve data from VBFA
IF I_VBAP[] IS NOT INITIAL.
 SELECT VBELV
 POSNV
 VBELN
 POSNN
 FROM VBFA
 INTO TABLE I_VBFA
 FOR ALL ENTRIES IN I_VBAP
 WHERE VBELV = I_VBAP-VBELN AND
 POSNV = I_VBAP-POSNR AND
 VBTYP_N = C_DTYPE.
 IF SY-SUBRC = 0.
 SORT I_VBFA ."BY vbelv posnv vbeln posnn.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 STOP.
 ENDIF.
ENDIF.
ENDFORM. " get_vbfa
*& Form get_likp
FORM GET_LIKP .
IF I_VBFA[] IS NOT INITIAL.
*--Fecthing data fron LIKP
 SELECT VBELN
 FROM LIKP
 INTO TABLE I_LIKP
 FOR ALL ENTRIES IN I_VBFA
 WHERE VBELN = I_VBFA-VBELN.
 IF SY-SUBRC = 0.
 SORT I_LIKP BY VBELN.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 STOP.
 ENDIF.
ENDIF.
ENDFORM. " get_likp
*& Form get_lips
FORM GET_LIPS .
IF NOT I_LIKP[] IS INITIAL.
*--select statement for retrieving data from LIPS
 SELECT VBELN
 POSNR
 MATNR
 vgbel
 LFIMG
 FROM LIPS
 INTO TABLE I_LIPS
 FOR ALL ENTRIES IN I_LIKP
 WHERE VBELN = I_LIKP-VBELN.
 IF SY-SUBRC = 0.
 SORT I_LIPS BY VBELN POSNR MATNR.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 STOP.
 ENDIF.
ENDIF.
ENDFORM. " get_lips
*& Form get_vbup
FORM GET_VBUP .
IF I_LIPS[] IS NOT INITIAL.
*--select statement for retrieving delivery status from VBUP.
 SELECT VBELN
 POSNR
 LFSTA
 WBSTA
 FKSTA
 FROM VBUP
 INTO TABLE I_VBUP
 FOR ALL ENTRIES IN I_LIPS
 WHERE VBELN = I_LIPS-VBELN AND
 POSNR = I_LIPS-POSNR.
 IF SY-SUBRC = 0.
 SORT I_VBUP BY VBELN POSNR.
 ELSE.
 MESSAGE I000 WITH TEXT-002.
 STOP.
 ENDIF.
ENDIF.
ENDFORM. " get_vbup
*& Form populate_final
FORM POPULATE_FINAL.
*--populating final internal table with sales and delivery data for
 displaying purpose
LOOP AT I_LIPS.
 I_FINAL-VBELN1 = I_LIPS-VBELN .
 I_FINAL-POSNR1 = I_LIPS-POSNR .
 I_FINAL-MATNR1 = I_LIPS-MATNR .
 I_FINAL-LFIMG = I_LIPS-LFIMG.
 READ TABLE I_VBFA WITH KEY VBELN = I_LIPS-VBELN
 POSNN = I_LIPS-POSNR BINARY SEARCH.
 IF SY-SUBRC = 0.
 READ TABLE I_VBAP WITH KEY VBELN = I_VBFA-VBELV
 POSNR = I_VBFA-POSNV BINARY SEARCH.
 IF SY-SUBRC = 0.
 I_FINAL-VBELN = I_VBAP-VBELN .
 I_FINAL-POSNR = I_VBAP-POSNR .
 I_FINAL-MATNR = I_VBAP-MATNR .
 I_FINAL-KWMENG = I_VBAP-KWMENG.
 I_FINAL-KDMAT = I_VBAP-KDMAT .
 READ TABLE I_VBUP WITH KEY VBELN = I_LIPS-VBELN
 POSNR = I_LIPS-POSNR BINARY SEARCH.
 IF SY-SUBRC = 0.
 IF I_VBUP-WBSTA = 'C'
 AND I_VBUP-FKSTA <> ' '.
 CONTINUE.
 ENDIF.
 IF I_VBUP-WBSTA = 'C' AND I_VBUP-FKSTA = ' '.
 I_FINAL-DS = 'Shipped but not invoiced'.
 ELSEIF I_VBUP-WBSTA <> 'C'.
 I_FINAL-DS = 'open'.
 ENDIF.
 APPEND I_FINAL.
 CLEAR I_FINAL.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDFORM. " populate_final
*& Form call_alv
FORM CALL_ALV .
DATA: CPROG TYPE SY-CPROG.
CPROG = SY-CPROG.
*---populating fieldcatalog
PERFORM POPULATE_FIELDCATALOG.
*-----layout
PERFORM Z_LAYOUT.
*----for sub totals.
PERFORM Z_SORT USING LT_SORT.
*-----calling REUSE_ALV_LIST_DISPLAY
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = CPROG
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = I_FIELDCAT
 IT_SORT = LT_SORT
 TABLES
 T_OUTTAB = I_FINAL
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_alv
*& Form populate_fieldcatalog
FORM POPULATE_FIELDCATALOG .
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'VBELN'.
W_FIELDCAT-SELTEXT_L = 'Sales Order Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 1.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'POSNR'.
W_FIELDCAT-SELTEXT_L = 'Order Line Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 2.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'MATNR'.
W_FIELDCAT-SELTEXT_L = 'MAterial Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 3.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'KWMENG'.
W_FIELDCAT-SELTEXT_L = 'Qty Ordered'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 4.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'KDMAT'.
W_FIELDCAT-SELTEXT_L = 'Customer PO number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 5.
W_FIELDCAT-OUTPUTLEN = 35.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'VBELN1'.
W_FIELDCAT-SELTEXT_L = 'Delivery Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 6.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'POSNR1'.
W_FIELDCAT-SELTEXT_L = 'Delivery Line Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 7.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'MATNR1'.
W_FIELDCAT-SELTEXT_L = 'Material Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 8.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'LFIMG'.
W_FIELDCAT-SELTEXT_L = 'Delivery Qty'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 9.
W_FIELDCAT-DO_SUM = 'X'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'DS'.
W_FIELDCAT-SELTEXT_L = 'Delivery Status'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 10.
APPEND W_FIELDCAT TO I_FIELDCAT.
ENDFORM. " populate_fieldcatalog
*& Form Z_LAYOUT
FORM Z_LAYOUT .
I_LAYOUT-ZEBRA = 'X'.
I_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
I_LAYOUT-GET_SELINFOS = 'X'.
ENDFORM. " Z_LAYOUT
*& Form Z_SORT
FORM Z_SORT USING P_LT_SORT.
DATA :LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-SPOS = '9'.
LS_SORT-FIELDNAME = 'VBELN'.
LS_SORT-TABNAME = 'I_FINAL'.
LS_SORT-UP = 'X'.
LS_SORT-GROUP = 'UL'.
LS_SORT-SUBTOT = 'X'.
APPEND LS_SORT TO LT_SORT.
ENDFORM. " Z_SORT

Crystal Report error trying to retrieve data from a user table

Hi,
I'm making crystal report application with VS 2005 and I need to retrieve data form a user table. I'm using Pull method, I configure the connection and parameters by code.
I think that the problem could be the @ that is used to identify these tables. Please, if some body had this problem before and have a solution, please let me know asap.
Thanks

Hi Andrea,
I had the same problem today. I upgraded from Crystal Version 8 to 11 and the problem was solved. Maybe it is too late for you, but I wanted to post the solution if anybody else has the same problem.
Regards
Guillermo

How to retrieve data from xml file into obiee reports

Hi all,
I've got a situation here. A xml file is stored as blob in oracle database table. Now i need to retrieve data/info from that xml file into obiee reports. How am i supposed to proceed with this ?

I will go for a table function:
http://gerardnico.com/wiki/database/oracle/table_function
In two words, you can create a function that behave as a table. Then you create a function to pick up your xml, you parse it and you send back the rows.
I know that Oracle has also a library for XML files but I never use it until now.
Success
Nico

Retrieve data from a non-peoplesoft application using HTTP Get

I need to retrieve data from a non-peoplesoft application. They want us to submit a HTTP GET request to their URL with a series of parameters. I am thinking about using HTTP Targert connector to accomplish this. Does anyone have sample peoplecode?
Currently we are on 8.51.10 Tools...
If there is any better way .. please let me know ..

I have used HTTP Get to get XML file from a government sanction list by hitting URL http://www.treasury.gov/ofac/downloads/sdn.xml
There is a delivered PS program that does that for vendor sanctions. I had to get the online setup correctly by creating a new custom Node with HTTP Target Connector. The program name is BSP_IMPORT. The below code is responsible for the calling the node and retrieving the data. Play around with the code below see if you can get it to meet your needs.
BSP_IMPORT_AET.BANKNODE.Value is just the custom external code that I created.
PMT_FLAT_FILE_INBOUND message is just a none rowset based message to use the web service call.
Local TR:FileUtilities:FTP &oFTPUtil = create TR:FileUtilities:FTP();
+/* HTTP */+
+/*******************************************************************************/+
Local Message &msgHTTP;
Local Message &msgResult;
+&msgHTTP = CreateMessage(Message.PMT_FLAT_FILE_INBOUND);+
+&oFTPUtil.PopulateFTPGetIBInfo(&msgHTTP, BSP_IMPORT_AET.BANKNODE.Value);+
+&msgResult = %IntBroker.ConnectorRequest(&msgHTTP);+
+/* check to see if the file is wrapped */+
+&strAllLines = &msgResult.GenXMLString();+
+&strAllLines = Substitute(&strAllLines, Char(26), " "); /* Added this line to remove invalid characters */+
+/*******************************************************************************/+
Edited by: Maher on Mar 20, 2012 3:28 PM

How to retrieve data using logical database and custom select options

Hi all,
I have a selection screen which is displayed by logical database PSJ and I have two select options of my own. I need to retrieve data based on both selection screen of logical database and my own select options. How can I do it?
Thanks in advance.

Hai Gupta
Check the following Document & Links
1. A logical database is in fact
a program only.
2. This LDB provides two main things :
a) a pre-defined selection screen
which handles all user inputs and validations
b) pre defined set of data
based upon the user selection.
3. So we dont have to worry about from
which tables to fetch data.
4. Moreover, this LDB Program,
handles all user-authorisations
and is efficient in all respects.
5. tcode is SLDB
good info about Logical Database. you can check the link.
http://www.geekinterview.com/question_details/1506
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Re: How to Create and Use ldb in reports?
Re: Logical databases
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
Functions for displaying and changing logical databases:
Call Transaction SE36 or
Choose ABAP Workbench -> Development -> Programming environ. -> Logical databases
Interaction between database program and report:
During program processing, subroutines are performed in the database program and events are executed in the report.
To read data from a database tables we use logical database.
A logical database provides read-only access to a group of related tables to an ABAP/4 program.
advantages:-
The programmer need not worry about the primary key for each table.Because Logical database knows how the different tables relate to each other,and can issue the SELECT command with proper where clause to retrieve the data.
i)An easy-to-use standard user interface.
ii)check functions which check that user input is complete,correct,and plausible.
iii)meaningful data selection.
iv)central authorization checks for database accesses.
v)good read access performance while retaining the hierarchical data view determined by the application logic.
disadvantages:-
i)If you donot specify a logical database in the program attributes,the GET events never occur.
ii)There is no ENDGET command,so the code block associated with an event ends with the next event
statement (such as another GET or an END-OF-SELECTION).
1. transaction code SLDB.
2.enter name z<ldb-name>
3.create
4.short text
5.create
6. name of root node (here Ekko)
7. enter short text (f6)
8.node type -> data base table.
9.create
10 change logical DB
riht click on ekko and insert node
here node name ekpo
11.create
12. click on selections
13. press no Should the changed structure of Z<ldb name> be saved first.
14.select tables which you want to join.
15.transfer
16 now you have to o to coding part.
17. save
activate.
19.click to src code
double click on first include and activate
Regards
Sreeni

Retrieve data from entity bean to struts and display in JSP

I am integrating Struts+EJB3.0.
Now i need to retrieve data stored in mysql database through entity bean to struts framework*(Action Form*).Then i need to display it in JSP page.(display using combo box).
Please Any one give suggestions!!!!!
Thanks in advance

I got the solution.
--Jagan.+

OIM: Retrieve data from stored procedure, pre populate it in Resource form

Hi,
I need to retrieve data form a stored procedure that i have created . This data needs to be per populated in the Iplanet resource from. The stored procedure will have one input string and one output string.
Thankz,
Sanjay Rulez

1. Prepare OIM Admin Console to interact with an Oracle Database, by adding jdbc jar files in the lib Directory of OIM Console.
2. Restart OIM Console and Create a database Resource
3. Create an Pre-populate adapter Task with a "Stored Procedure" Type
4. Invoke you Procedure.
The main problems can be around datatype conversion between Java and Oracle database.
For instance, all Oracle NUMBER type are mapped on java LONG type, and you need to deal every time with conevsrion between INTEGER and LONG in the adapter task.

Retrieve data from BAPI, FM and Insert in WAS Database

Hello All.
I need to retrieve data from SAP in WedDynpro project using BAPI, FM and create tables in WAS Database to Insert.
I have created the front ends in WedDynpro project to acces data using BAPI and FM. Its works fine.
How to create these table in WebDynpro project to insert the data come from SAP (BAPI - FM) ?
I created the tables in dictionary.
--> Create a new project --> project type Dictionary Project --> Create Tables.
How can insert the data from the BAPI in tables created in dictionary?
Best Regards.
Taylor

Hi Taylor,
I think you have opened two threads for the same question. Please, close this thread.
Regards,
Gopal.

HELP REQ IN SIMPLE CODE TO RETRIEVE DATA

Hi all,
i need to retrieve data from an internal TABLE whose date field is multiple of 2 days behind from current date.
like todays date is 14/08/06
i need records of date 12/08/06,10/08/06,8/8/06,6/8/06,4/8/06 .....
any help would be appreciated
THANKS

You can use a range for this and build it on the fly. The only question is how far back do you want to go. I mean, how many dates to add to the range. Here I'm only adding 10.
report zrich_0001.
ranges: r_datum for sy-datum.
r_datum-sign = 'I'.
r_datum-option = 'EQ'.
r_datum-low = sy-datum. append r_datum.
do 10 times.
r_datum-low = r_datum-low - 2. append r_datum.
enddo.
select .....
where datum in r_datum.
Regards,
Rich Heilman

T5 - Totally Dead - Need to Retrieve Data

Similar Messages

Maybe you are looking for