T520/T420 UEFI BIOS Management - Changing Boot order

WIth the T410/T510 I could use the SetConfig.vbs to change the boot order in BIOS.  However with the newer laptops (T420, T520, X220) that have the UEFI BIOS the SetConfig.vbs doesn't seem to work.  Is there another way of scripting the boot order change?  I also tried running the ListAll.vbs and didn't see anything related to the boot order listed in WMI. Any suggestions would be greatly appreciated.
Solved!
Go to Solution.

I tried your exact script on T520 with BIOS 1.27
1.  in the case where LAN cable is connected to network with PXE server  <-- system booted to LAN successfully
2.  in the case where LAN cable is not connected  <--  system booted to HDD after LAN boot failed to detect media
3.  in the case where LAN cable is connected to network without PXE server  <-- system booted to HDD after LAN boot timed out
So I could not repro any problem.  What am I missing?  Are you on a dock?  Are there any other peripherals connected?
As for your other question, I'm sorry that I'm not following it.  You can change the boot order in the Startup menu, the very first option is "Boot" where you can set any boot order you want just like previous systems.

Similar Messages

  • U300s: Cannot access BIOS to change boot order

    I was dual booting Windows 8.1 Update and Ubnutu 14.04
    From the windows disk manager I deleted all Ubuntu partitions and rebooted my notebook. I was immediatlly present with the grub rescue promt. Normally this is a quick and easy fix, by booting a windows USB/CD and repairing the windows MBR. 
    My problem is I can't access the bios or the boot menu to change the boot order. Nothing I've tried has let me get into the bios to set my USB stick as the first boot option. 
    Using the small recovery key button on the side of the notebook which normally boots the notebook to the screen where you can choose which drive to boot does the same as the power button. There is no bios flash screen or abililty to press any keys before getting to the grub screen. 
    I've drained the battery and left over night hoping this would reset the state it seems to be stuck in but that also did nothing. 
    Here is a short video showing what happens when I boot the notebook http://youtu.be/2FpC2Deuawk

    peavers wrote:
    I was dual booting Windows 8.1 Update and Ubnutu 14.04
    From the windows disk manager I deleted all Ubuntu partitions and rebooted my notebook. I was immediatlly present with the grub rescue promt. Normally this is a quick and easy fix, by booting a windows USB/CD and repairing the windows MBR. 
    My problem is I can't access the bios or the boot menu to change the boot order. Nothing I've tried has let me get into the bios to set my USB stick as the first boot option. 
    Using the small recovery key button on the side of the notebook which normally boots the notebook to the screen where you can choose which drive to boot does the same as the power button. There is no bios flash screen or abililty to press any keys before getting to the grub screen. 
    I've drained the battery and left over night hoping this would reset the state it seems to be stuck in but that also did nothing. 
    Here is a short video showing what happens when I boot the notebook http://youtu.be/2FpC2Deuawk
    I think the problem is in deleting Ubuntu. According to this video after the deletion of the Ubuntu partitions they must be combined back to the Windows partition.

  • I can't acces to BIOS to change boot order on Satellite 2410

    I can't acces to cmos to change boot priorityre. HELP !!!
    Notebook Satellite S2410-504.
    I try to normally press "C" on startup to boot from CD. but it don't work.
    F12 too don't help.
    I think some set some password on HWUtility, but how disable this pasword?
    Please HELP!!!!

    LOL... motherboard replacement? You dont need a new Motherboard.. Just a new flashed BIOS... Buy a new flashed BIOS... or ask someone to flash your old one...
    Aaaand you can always update the BIOS with the wrong procedure :) as long as you dont reboot... If your highly skilled you will be also able to do the following trick...
    Get a NB with the same BIOS and BIOS chip... Load the operating system... remove the BIOS chip while the operating system is... operating... Put the bad flashed or empty BIOS chip in the socket... Flash it... Now you got your accidentally bad flashed BIOS chip flashed...
    To your BIOS Password problem Problem... I dont know, if Toshiba has build in a reset Jumper... But in Desktop systems, you can always reset the "complete" BIOS + Password with that jumper. Should be possible in Notebooks too...
    Message was edited by: Stryker

  • Having difficulty in Win 8.1 changing boot order drive at the Bios level

    My desktop computer has 32GB of DDR3-1600Mhz Memory plus a 128GB SSD boot drive "C" and 2 2TB SATA drives and finally a 1TB Sata drive.
    My problem is that the 128GB SSD drive is maxed out space wise.  I want to change the boot drive to the 1TB drive, but when I go into the Bios, and slect "Boot Order" it only lists two CD Rom drives and "Windows Boot Manager".  If i go out to look at available drives, it shows all my drives.  How the heck can I select the 1TB drive to become the boot drive if its not even listed under "Boot Drives"?
    Using disk partitioning software, it advises that before copying everything over from the boot SSD drive to the new 1 TB drive, I should change the boot drive so that when it starts up again, it will go directly to the correct drive.  
    Thanks so much,
    Ken

    That is impressive for a OEM.  However, I think it is probably not a good idea to try to make a different drive the boot drive.  Typically with a unit set up like that, the SSD is only used for essentially the OS and special programs that need the extra speed of the SSD.  Then use the other drives for data and nonessential ( for speed ) software.  About the only advice I can give is to reassess the way software is installed to get some things off the SSD or replace the SSD with a larger capacity unit.  I think switching boot drives will be a nightmare you will not enjoy.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Portege R700 - Change boot order remotely

    Hi all,
    Is it possible to remotely change a Toshiba Portege R700 BIOS? - More specifically change the boot order to PXE boot (instead of HDD).
    I plan to deploy images to our laptops using SCCM 2007 but need a utility to change the BIOS settings. HP and Dell both allow you to do this, does Toshiba?
    Thanks in advance

    Hi buddy,
    I think Syntax is right and I would recommend using a normal based Windows remote program and HWsetup for chaning BIOS settings and boot order.
    If HWsetup is not installed you can download it here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    I also use this pretty nice and easy tool to change BIOS settings and I have taken a screenshot where you can see its possible to change the boot order with one click only :)
    <a target='_blank' title='ImageShack - Image And Video Hosting' href='http://imageshack.us/photo/my-images/200/hwsetup.jpg/'><img src='http://img200.imageshack.us/img200/3655/hwsetup.jpg' border='0'/></a>
    I hope it helps

  • T520 - Changing Boot order in BIOS

    Could someone describe exactly how to change the boot order on the T520 from the BIOS?  I have spent hours trying to do something that should be very straightforward and simple.  Any directoin would be appreciated.
    Moderator note: moved post to its own thread and changed title to match content.
    Lenovo T520
    Lenovo Thinkpad Tablet

    Hi rsbonini,
    I moved your post here from an old thread that was about managing UEFI BIOS boot order with scripts...
    I wonder if you're being tripped up by the same thing that got me with my T420:  The ">Boot" line in BIOS -> Start Up looks like a heading for the rest of the page, but it actually links to an expandable menu. (That's what the ">" is indicating, I guess).  This got me and a few of my friends.
    Highlight that ">"Boot" line and hit enter, and you should get the boot priority list with instructions on how to change it in the right pane.
    Apologies if I've misunderstood,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Satellite L750 BIOS trouble - cannot change boot order

    Hello reader/answerer of my questions,
    I am having some trouble with my 750 ODN's bios. This bios was an official update (3.6) from the support centre, and almost everything has been fine since (the plot thickens!). I decided one day I wanted to dual boot with linux, in particular Fedora (this is not related to it though).
    But, when I burned the disc and tried to live boot (too test it out) I found that the boot order was set to hard drive first! I rebooted and pressed f12 - didn't work.
    I tried delete and escape - neither worked. I then tried all the f keys - none of them worked.
    Every time it took me to Windows boot menu, and I explored that and I couldn't find anything.
    It's also worth mentioning I am running Win 7 SP1.
    I tried both PLoP and osloader (too boot from the dvd) - neither worked.
    I also can't remember what the key to start the bios was originally - oops!
    Also the toshiba logo with instructions never appears.
    I would really just like too change the boot order though, the rest of the bios I don't need access too right now.
    A separate issue is that Windows randomly decides it wants to check my hard drive, which takes ages, and it won't give up until it gets to check it. I think it may need some medical help.
    But, any help, from a qualified doctor or not, would be greatly appreciated.
    Thanks in advance
    Mitchell

    Hi
    > I also can't remember what the key to start the bios was originally - oops!
    Pressing F2 while powering up the unit would help you to access the BIOS.
    But you dont need to change the booting order within the BIOS. You can do that by pressing F12. This should be done immediately after you have powered up the notebook.
    Then the boot menu would appear and you could choose the right boot device.
    Does it functions?

  • BIOS Changed Boot Order By Itself

    I have a Pavilion H8-1360t. When I got it in March I installed a Samsung SSD. I copied the original Hard Drive to the SSD and made the SSD my boot drive. I also swapped the SATA ports becasue the HDD was on the high speed on. For the next 4 months I've been booting every morning and shutting down at night with no problems. The SSD boots quick and again, no problems. The SSD was my C drive and the original HDD was now my F. I only used it for Ghost backups of the C drive. I also Ghost to an external USB3 drive.
    This morning when I booted I noticed that all my icons were missing as was all my data and all my programs I had installed. AFter some research I found, in the Computer display of my system, that my SSD was now the F drive and the original HDD was now my C drive. So I was booting using the original HDD that came with the system.
    I tried to figure out how to tell the BIOS to boot from the SSD as it had been, but I cannot figure out which drive in the display list is it and besides that I want it to do that by default. I'd also like to know how or why the PC decided to reassign thedrive letters and boot from the HDD now.
    HP refuses to help saying that since I have user installed devices they do not have the tools to help. They also cannot tell me how to get the Boot Order changed. But even if I could do that, and I've tried going into BIOS setup and Boot Priority, I cannot get it to boot using the SSD. HP suggested I go to some third party. But there's got to be a solution I can do. My last choice would be to copy the entire SSD to the HDD (the SSD id only 500GB and the HDD is a Terrabyte). I assume then that when it would boot from the HDD the data I copied over to it (using Ghost) would make it look then like the SSD did. My loss would be speed but at least I'd have critical data that I now cannot access.
    I am really up the creek right now Any ideas?
    Thanks

    I took the PC to Fry's. They think there's a problem with the SSD. Even though I am able to see it and to move data off of it, there is some problem during boot that tells W7 and BIOS that is cannot boot and that is what is causing the system to then look for another boot drive. It then finds the hard drive, which came with the system and is connected, and is bootable, and thus it boots from that drive and also remaps the drive letters, effectively swapping the C and F between the SSD and HDD.
    Now I am trying to move all my data to the HDD, install Office and other programs, and just boot to the HDD until I can get the SSD examined for problems and a new one, if necessary, put in.
    PC's are such a joy.

  • Changing Boot Order on Dual Boot Windows 8 and Ubuntu

    Hi there,
    Recently got a HP Pavilion g6 2213sa which came with Windows 8 (spit!) and this disgusting UEFI BIOS replacement (double spit!).
    Anyway, I need to dual boot Ubuntu on my system, so I installed Ubuntu. Normally, on a non UEFI system, a "Grub" bootloader installed by Linux would take over the startup process, and allow you to choose between either Windows 8 or Ubuntu on startup.
    However, on this computer, startup is just booting straight to Windows 8 despite the fact that Ubuntu and Grub IS installed.
    Now, upon startup, if I press F9, then I get to change the boot-device on a one-time basis. I can either select "OS Boot Manager", which loads Windows 8, or "Ubuntu" which loads the Grub bootloader which allows me to select Windows 8 or Ubuntu.
    However, when I press F10 to enter the Bios Setup with the intention of changing the boot order permanently, the Ubuntu option isn't there. Instead it has OS Manager, USB Disk, CD Rom, USB CD Rom and Network Card.
    Thanks, HP for, the crappily designed BIOS.
    Anyway, can anyone PLEASE provide me a way of changing the boot order so that GRUB is loaded first and NOT this crap Windows 8 rubbish (that I would happily bin if I didn't need it for work). 

    There is the same problem in HP 2000 laptops (in my case specifically, HP 2000-2D22DX). I did some investigation using trial and error, and this is what I found out:
    There is some sort of a "recovery feature" or so that on every boot sets the very first UEFI load option to point to one of the two locations, in this order:
    \EFI\Microsoft\Boot\bootmgfw.efi
    \EFI\Boot\bootx64.efi
    This option is displayed as "OS boot Manager" (for the first path) and something akin to "UEFI partition" for the second path, completely ignoring the actual name given to it (when you look at the EFI variables through efibootmgr, you can see that what is displayed as "OS boot Manager" actually is set to the name "Windows Boot Manager"; why anyone would do such renaming is beyond me). If you try to change the boot order so that this slot isn't the first, the UEFI will overwrite the BootOrder variable on next boot and reset it to point to "OS boot Manager" anyway.
    By default, both of the paths above contain the same Microsoft bootloader (if you check the md5sum of both, you'll see they match).
    So, until HP releases an updated UEFI that allows turning this "feature" off or rearranging boot options through the F10 UEFI setup, this is what you can do to get dual boot with the least amount of hackiness:
    In Windows, mount the UEFI partition (mountvol S: /S mounts it as the S: drive) and copy the file \EFI\Microsoft\Boot\bootmgfw.efi to use some other name (for example, I copied it to "\EFI\Microsoft\Boot\bootmgfw.efi~", but you can change the name to anything else).
    In the Windows command prompt, update the Windows UEFI entry to point to the new name: bcdedit /set {bootmgr} path \EFI\Microsoft\Boot\bootmgfw.efi~ (adapt to your set name accordingly).
    Optionally, change the name of the Windows boot loader so that you would be certain that it points to the new file location: bcdedit /set {bootmgr} description "Fixed Windows path"
    Install the other OS. In my case the bootloader was installed into \EFI\opensuse\grubx64.efi.
    Delete the two files, \EFI\Microsoft\Boot\bootmgfw.efi and \EFI\Boot\bootx64.efi.
    Use efibootmgr to delete the "OS boot Manager" entry: sudo efibootmgr -b 0000 -B
    Set the new OS bootloader to be the default bootloader by using efibootmgr with the -o option. In my case, I had an entry called "opensuse" in slot Boot0001 and the updated path Windows entry in slot Boot0002, so I had to do sudo efibootmgr -o 0001,0002
    Update GRUB to point the Windows entry to your renamed file (you'll have to create a new file in /etc/grub.d and rerun grub-mkconfig).
    And that's it, now the UEFI will boot GRUB by default (it won't regenerate the "OS boot Manager" entry since it won't be able to find either of the two hardcoded paths and will "fall back" to properly reading the BootOrder variable), and the F9 menu will still allow choosing to boot Windows directly.

  • Re: Satellite A210-10A, crashes when changing boot order

    Hello,
    I have a serious problem with my Toshiba laptop, Windows Vista 32bit, 1.8Ghz, 2Gb RAM, AMD Turion 64 x2
    There is one hard disk partitioned as two 75Gb drives (C and E).
    The problem is that, whenever I enter the Boot menu (to boot from CD), or if I change within the BIOS the boot order and then restart, the computer crashes (power cuts off suddenly).
    Then the only way to recover, is to plug out the AC/DC adapter, wait 5 min, and start again. Then, either everything goes on normally, or Windows system recovery launches, after what it will reboot and work fine.
    It might be important to know that I repartitioned the E drive to have 30Gb for installing Win7 later on. The annoying thing is that I never tried changing the boot order before repartitioning, so I don't know whether it has something to do with the problem or if it was there before.
    Any help or suggestion would be appreciated.
    Thank you,
    Message was edited by: bambula

    hi,
    > The problem is that, whenever I enter the Boot menu (to boot from CD), or if I change within the BIOS the boot order and then restart, the computer crashes (power cuts off suddenly).
    It looks like the Bios related issue. Have you tried to update it or reflash?
    > The annoying thing is that I never tried changing the boot order before repartitioning, so I don't know whether it has something to do with the problem or if it was there before.
    Maybe this took place before but you didn't check.

  • A45-S120 - WinXP corrupted, unable to change boot order to restore from DVD recovery medium

    I have a Toshiba A45-S120 laptop that has previously worked fine. I hadn't turned it on for several weeks. When I tried last week, after the WinXP splash screen came up, the progress bar completed one pass and then the video froze and showed a ghosted image of the WinXP logo off to the right of the real one and the two images were displayed in alternating vertical stripes, almost as thought you were looking through vertical blinds. At that point, there was no further boot progress.
    Pressing Esc got me into the BIOS page, so it doesn't appear that there was a hardware video problem. The only options that I can could in the BIOS were the time and password (which is not set). With the recovery DVD in the drive, I couldn't get the system to boot to the CD/DVD drive no matter what I did. I tried all the suggestions of F12, F2, etc., and nothing highlighted any of the row of icons across the bottom of the Toshiba spalsh screen. When I booted, unless I pressed Esc, the system recognized the failed Windows boot and went into the text screen giving me all the safe mode start options.
    After typing the above, I had one other thought - to try to force the issue, I replaced the hard drive with one that should have been blank but I got the same louvered WinXP logo. Thinking maybe I had a drive that wasn't blank as it should be, I tried a known blank drive. Now I get no response from the system at all when I try to power it on, even when swapping back to either of the other hard drives.
    Is this stuff symptomatic of a dying system or is there something I can do to resurrect it and force the DVD restore somehow? Refurbishing desktops is a hobby of mine but I haven't had much experience with troubleshooting and repairing laptop issues, so thanks in advance for any pointers.
    JEFF
    Solved!
    Go to Solution.

    Well, I have good news and confusing news to report...
    The dongle worked as advertised.  I booted with it installed, powered down and removed it, then restarted the machine.  I was able to change the boot device and enter BIOS with the ability to change the boot order, etc.
    I then ran the recovery process.  The ghosted image restored and then, when the machine restarted, I got the same problem that started it all... the WinXP splash screen came up, the progress bar completed one pass and then the video froze and showed a ghosted image of the WinXP logo off to the right of the real one and the two images were displayed in alternating vertical stripes, almost as thought you were looking through vertical blinds. There were also 4 or 5 thin vertical stripes that were flashing as though video was being displayed though them like it used to if you used an older monitor with a new system that couldn't display things properly.  At that point, there was no further boot progress.
    In order to do a bit more troubleshooting, I booted the system with a live Linux CD - it booted and ran OK.  I then tried installing Ubuntu.  It started and then the screen went wonky again, with pixellating lines all over.  I then repartitioned it, ran scandisk on the hard drive overnight (no errors), and reran the recovery process.  Same shadow image when the XP splash screen appears - and it does this both during the ordinary booting process as well as during an attempted safe mode boot.
    As I was typing the above, I remembered one other thing I meant to try.  I reset the BIOS to default values and reran the recovery process - still a messed up WinXP splash screen after the progress bar makes 2 or 3 passes.
    If anyone has ideas, I'd be grateful for the help.

  • Change boot order HP 23-f250

    I am using a HP 23-F250 AIO and I am trying to boot from a rescue DVD. inst. were to use F12 and change the boot from DVD. Do I have to change the seq. in the bios first? I am using Macrium software to do a restore from an Image file.
    Larry
    This question was solved.
    View Solution.

    Press the power button and then tap the Esc key to invoke the startup menu.
    In the startup menu, choose the F9 key to change the boot order.
    Use the arrow key to select the ATAPI CD/DVD drive and then press the Enter key to select it as the boot device.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Changing Boot Order with VBS in WinPE

    So what I want to do is change the boot order in Windows to boot from a flash drive, then the flash drive will boot to WinPE and run another script that will then change the boot order to not boot from the flash drive. I have the script, and it works fine under Windows, but under WinPE it reports success, but doesn't actually make the change. I have both WSH, and WMI installed on my WinPE image as well so that isn't the problem.

    Hi and welcome to lenovo forum...
    first i must say ... did you Backup your system ..?
    if you want to install other OS there is no way to return ... !!!
    Be sure that S10 BIOS (94 is the latest)  is prepared to boot from USB HDD...
    if not do this at start press F2 to go in BIOS
    set Fn-F7 numpad on tab to Boot ...
    with plus + (plus + left on right SHIFT key is active )
    move USB via + and - so the result shown like this....
    1: USB CD Drive
    2: USB HDD
    3: HDD WD ....
    4.... 
    -----> F10 Save and Exit to save setting
    Wil you DVD/CD recognized by BIOS... ?
    ... should shown named in BIOS for example
    USB TSS 6571 .....like HDD in above picture... if not named its not recognized...
    ... you can press  F12 at start to get in boot menue ...
    there is no special behaviour in 3G UMTS machines you got  from provider  .....
    sincerely KalvinKlein ...
    Want more ? For further information to get the most of your S-Class machine
    Lenovo Energymanagement 
    Backup
    Windows 7   Install help
    Windows 7 Official Driver
    Clean XP Install
    XP Startup
    Small WebCam Guide
    Lenovo Easy Capture
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Windows 7 Stuck At BIOS Cannot Enter BIOS or Change Boot Media

    My laptop has no problem before. Recently I try to install Windows XP. First attempt fail, so I change SATA at BIOS from AHCI to Compatible, success. However the partition that I want to install Windows XP to is not available. 
    So just to test I choose my Windows 7 partition. Since it want to format the partition, I cancel the installation. After restarting windows, it stuck at bios. I restart again and change SATA to AHCI. Restart, still stuck at bios. This time I cannot enter BIOS, recovery or change boot media. Assuming the boot sector has corrupt, will reseating the cmos battery will fix this  problem. Please help. Thanks in advance. 
    Solved!
    Go to Solution.

    hi kiebloom,
    Yes, you will need to boot without the HDD to try and access the BIOS again. If you're able to access the BIOS using this method, reload the BIOS defaults by pressing F9 then press F10 to save and exit.
    From here, you can try to:
    1. Re-insert the HDD and press the OneKey Recovery button to reinstall Windows 7
    2. Create a recovery disc for Windows 7, format the HDD and downgrade to Windows XP
    3. Dual-boot Windows 7 and Windows XP (see this guide)
    Best regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Ideapad U510 - Changing Boot Order

    Hi!
    I received a U510 for Christmas and I want to perform a fresh install of Windows 8 via USB.
    Whenever I reboot the machine, at the LENOVO screen, I press F12 but no bootmenu appears. There is no option in entering the BIOS either.
    What can I do to boot off of USB? I tried F2, F10, F12....please help!!
    Solved!
    Go to Solution.

    Never mind...I figured it out.
    I hooked up an external keyboard, Enabled Legacy boot.
    F2 is BIOS
    F12 is Boot Menu.

Maybe you are looking for