T60 Wont Suspend... and Freq Control Monitor wont work when add to gp.

Hey guys,
I have a lenovo T60, and it cant seem to suspend..
C2D 2.0GHZ
ATI X1400 fglrx propriatary driver 7.11 with no compiz.... (waiting untill 7.13)
2gb DDR2
I saw a thread similar to this, but there was no vga=773 or whatever to my kernel in my menu.lst.
I just want to suspend, and have the ability to control freqs, any suggestions?

Hey, i got the new Catalyst 8.1, and suspend works, well, only when i have to manually run " echo -n mem > /sys/power/state" it works, but if i press suspend on my keybord, or go to system>shutdown>suspend it wont work.
But i still cannot get compiz to work, here is some useful info.
compiz --replace
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "GLcore"
Load "dbe"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "AIGLX"
EndSection
glxinfo | grep direct
direct rendering: Yes
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon X1400
OpenGL version string: 2.1.7276 Release
I Hope this is enough info for you guys!
Last edited by Borat (2008-01-21 19:50:38)

Similar Messages

The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

Hello there, Teworsham90.
The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
iTunes: How to add artwork to songs and videos in your library
http://support.apple.com/kb/HT1409
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.

How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.

The following assumes you've been backing up to icloud all along.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
Let us know if this method does not work.

Code wont work when trying to upload image!

My Code wont work when I try to upload an image to mysql. (Field in mysql is BLOB)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>insert</title>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<?php require_once('Connections/drama_database.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO databaseimage (name, image) VALUES (%s, %s)",
                       GetSQLValueString($_POST['name'], "text"),
                       GetSQLValueString($_POST['image'], "double"));
mysql_select_db($database_drama_database, $drama_database);
$Result1 = mysql_query($insertSQL, $drama_database) or die(mysql_error());
mysql_select_db($database_drama_database, $drama_database);
$query_image = "SELECT * FROM databaseimage";
$image = mysql_query($query_image, $drama_database) or die(mysql_error());
$row_image = mysql_fetch_assoc($image);
$totalRows_image = mysql_num_rows($image);
?>
</head>
<body>
<form action="<?php echo $editFormAction; ?>" method="POST" enctype="multipart/form-data" name="form1" id="form1">
Name: <span id="sprytextfield1">
<label for="name"></label>
<input type="text" name="name" id="name" />
<span class="textfieldRequiredMsg">A value is required.</span></span>
<p>
    <label for="image"></label>
    <input type="file" name="image" id="image" />
</p>
<p>
    <input type="submit" name="Upload" id="Upload" value="Upload" />
</p>
<input type="hidden" name="MM_insert" value="form1" />
</form>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1");
</script>
</body>
</html>
<?php
mysql_free_result($image);
?>
Any help would be very much appreciated!

OK, that tutorial is different than what I assume you want. I suspect you want the ability to have users upload images and store the metadata of those images in a database, correct? That tutorial only shows how to upload to a specific location so the image can
be displayed in an iframe.
Search for "php file upload scripts" to see how to upload to a file system and store the metadata in the database.
>and no, mostly i have used the dreamweaver features to avoid it as much as possible
As you are seeing, DW code is very limited in what it can do. It also generates code that is not up to current standards,and is very difficult to work with if you need to modify it. Basically, it's junk. Forget it and learn how to read and write code. There are tons on tutorials on how to get started with PHP. DW Server behaviors only seem like a time saver in the beginning. In the end, you'll end up wasting more time using them than learning how to code yourself.

Ipod Worked by voice control in my Ford Sync, then I connected to Itunes to update and voice control no longer works!

My Ipod worked by voice control when it was connected to my Ford Sync. I connected to Itunes to update and transfer music and voice control no longer works. Help?

Its is a 5th Generation Ipod Classic with video NOT a NANO!

HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

Not really sur easy you would be having that problem. Mine works. You might try RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
regards
Hemang

Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc. The more information we have about your environment will help us assist you better. But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it

My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it what do I do ??

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

Go to settings/music/volume limit tap on that. Make sure it is set to OFF and when you tap it that the slider is at max

I inherited an 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?

I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?

But they work normally when not plugged in? What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle. I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
B-rock

My ipod wont work when i touch certain spots

when i try to text i cant use numbers because that prt of the screen wont work or to enter my screen works other wise just certain apps and typing how can i fix it??

Make sure the screen si clean and remove any screen protector is y have one.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

QT Pro wont work when updating to Snow Leopard

Both Snow Leopard 10.6.2
On my iMac I have QT and and older version (PRO) and all is fine.
ON my laptop I have QT and and older version (PRO?) and Pro wont work - I Get Message
saying "Can't use this version this (you have QT player 7.0.4)
How do can I get my old pro version working? Can I DL it separately and then key in my regis numbers?
Frankly I prefer Pro over the new SNL version of QT
PS Dont have old instal disk with my laptop

Can't use this version this (you have QT player 7.0.4)
The only QT 7 version currently compatible with Snow Leopard is v7.6.3 which is found in the extras package on the Snow Leopard installation disc. (Assuming it was not already installed in your "Utilities" folder if QT 7 Pro was already active on your platform when you installed Snow Leopard.)

My hp stream wont work, when I turn it on the cursor is on a black screen, help!

my hp stream wont work. I turned it on and the cursor appears but nothing works. Its fully charged, I've tried turning it off and on but still no luck. Please help

Has it ever worked? Hold volume down (-) while pressing power button. That takes you to BIOS (CMOS setup). Follow the menus for Windows reinstall.

Web service proxy and data control are not working properly

Hi,
I am working on jDeveloper 11.1.1.6
I have a SOA web service which requires 3 inputs and return with a set of data.
When I tried testing that web service in soapUI it is working perfect. But when I have created a web service proxy in my application and trying to test it from class (*******_ptClient) main method everytime it is replying with the output null
Also When I am requesting from the main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side.
After that I have created web service data control and tested in that case also it is not showing any result.
What could be the problem ?
Please help.
Thanks
--NavinK

Hi Shay Shmeltzer,
Thanks for the reply.
I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
Please Help.
-- NavinK

After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work

After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
Thanks!

Look at the previous posts on the right under the heading: "More Like This". I appears that others are having the same problem.

T60 Wont Suspend... and Freq Control Monitor wont work when add to gp.

Similar Messages

Maybe you are looking for