T6060 possible problem/error of production...Central speaker is weaker and faded than the others

I just noticed on my recently bought t6060 that the center speaker sounds weaker and faded compared to the other satellites. what might be the problem? i know that the center speaker is intended for voice reproduction in 5.1 streams. On dvd playback i hear the voices, but not as clearly as other sounds that are reproduced by the satellites. When testing the speakers, when naming each channel, the center speaker is softer, faded and weaker than the others. Is it normal to be this way or do I have to return the product to service? Please tell me what to do...if there is anymore testing to be done, or if this is the normal way it should sound.
I tried to connect one of the other 8 watt satellites to the center connector, and it sounds perfectly clear, so there should be good audio output on the center channel, but when i connected the central speaker, which is 8 watts of power in the place of the speaker that i had unplugged earlier before, the central speaker sounded as soft, weak and fade as before. What is the problem? Do I have a defective central speaker? Please guide me what to do. I am kinda disapointed by all this. I have a Creative Live! 7.1 24 bit which works fine and also a Creative MuVo V200 512 MB, and i am very pleased with both of them. That's why I chose Creative for my 5.1 speaker system. Help, please. Thank you very much for your earliest attention.

there was a real faulty center speaker, they've aknowledged the problem and they changed the whole system with a brand new one, which works pretty good. SOme things i have noticed comparing the two packages. I am afraid that the first set that i got was some sort of an RMA product that had been fixed, because although the seals were intact, and the inner boxes seemed new, but the small plastic bags that contained the speakers were somehow damaged and the speakers were not that well packed as this new set that i got a few days ago. The thing that i noticed, unfortunately is that i have now the same problem as SMSMASTERS reported, the fluctuation of the volume. It is perceptible, but after a little bit of fine listening. It's definitely there... I frankly am dissapointed in Creative for not being able to make a good solid product. And how could they market a product that, as you can see on this forum, has so many problems and bugs that need to be fixed? I would advise all those who want to buy new products and recently marketed products from creative to wait a little bit more and not haste into it...i think the best speaker set that will be marketed under the name of t6060 would be somewhere in spring or summer of this year, probably the revision B or C series, cause this one really sucks. The speakers are alright, and they sound pretty clear and accurate, and it's probably a problem with the remote, as other people reported on the forum, but it's simply rude and disconsiderate to buyers and especially to Creative fans to release a product with so many bugs that need to be fixed. It's a shame really, and a huge dissapointment. I wonder how you all feel, all of you who posted on this forum about bugs related to your hardware...

Similar Messages

I have downloaded AI Trial but am getting a Configuration Error as follows 'A problem has occured with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support

I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5.
I have tried the restart suggestion, but the problem persists.
Can anyone assist.
TIm

Tim,
This may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers of the appropriate version can be accessed from the Internet

Good Morning,
We are getting this error
Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers
of the appropriate version can be accessed from the Internet
We installed a new Exchange 2007 CAS on Windows 2008R2. Got rid of old CAS on Exchange 2007. Now seeing this error. Does anyone have an idea??

Hi,
If the issue persists, I recommend you install Exchange 2007 SP3 RU7 and check the result. Also, ensure that Exchange 2010 SP2 RU1 or later version is installed. Old Exchange version may lead to the CAS-to-CAS proxy incompatibility.
What's more, here are some helpful blogs for your reference.
Exchange 2010 SP2 RU1 and CAS-to-CAS Proxy Incompatibility
http://blogs.technet.com/b/exchange/archive/2012/02/17/exchange-2010-sp2-ru1-and-cas-to-cas-proxy-incompatibility.aspx
OWA Coexistence With Legacy Versions
http://blogs.technet.com/b/sjimmie/archive/2010/07/09/owa-coexistence-with-legacy-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Why do I get the error saying my session has timed out and to start the operation again from the beginning when trying to instal lion

I've purchased Lion from the app store and successfully installed it on three computers...however, now I'm receiving an error saying my session has timed out and to start the operation from the beginning??? Help..Thanks

This is asked and answered mnay times every day. The forum search abr is on the right side of this page.
Disable your firewall/security software.

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Possible to make an item editable for certain users and read only for other

Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

Have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .

have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .

Apple world-wide support numbers are found at: http://support.apple.com/kb/HE57
If this is regarding your information line that says a stolen iPhone, Apple can do nothing to help you. You must track the iPhone yourself using iCloud and must have turned on Settings > iCloud > Find My Phone before it was stolen. If that was not done, there is no way to track the iPhone.
Report the theft to the police and the cell service provider and ask if they can blacklist the iPhone so it cannot be used. Change all passwords associated with acconts on the iPhone.

Stand speaker with charger and it has the function to make phone calls

Dear Team,
kindly advise me if I could get accessory on my I-phone 6, as below description:
Stand Charger + speaker with the function enabling receiving
phone calls at same time align with speaker.

Hello Geoffers and welcome to the forums;
After each of these steps, try to make a call:
1. Try turning Airplane mode on and off.
2. Try opening the phone app, open the menu from the top left-hand corner and tap Preferences. From there, scroll down and tap on Update Network Settings, then Update PRL. If your device does not have one of them, that's okay.
3. Next, try restarting your phone by holding down the power button and moving the ringer mute switch back and forth 3 times, then let go of the power button. The screen will blank out and the device will restart.
After that, give Bell a call, there may be something going on with your account that they could assist with.
Hope this helps,
TreoAide

I currently have a basic phone but I would like to switch to a smart phone. I don't have an upgrade right now and none of the other phones on the plan have an upgrade either (4 phones in total, 2 smart phones and 2 basic). Is it possible to get a phone fr

I currently have a basic phone but I would like to switch to a smart phone. I don't have an upgrade right now and none of the other phones on the plan have an upgrade either (4 phones in total, 2 smart phones and 2 basic). Is it possible to get a phone from a 3rd party, instead of buying a phone from Verizon at full price, to switch with the basic phone?

i have a basic prepaid phone and was given a samsung android verizon gave me several options from going to a contract or doing prepaid or month to month even got a free sim card

Load error code 9: VI version (8.2) is newer than the LabVIEW version (8.2b23).

I am getting the error...
VI version is later than the current LabVIEW version. An error occurred loading VI 'CleanupCallback.vi'. LabVIEW load error code 9: VI version (8.2) is newer than the LabVIEW version (8.2b23).

This is true. the 'b' indicates that it is a beta version of labview 8 (.2 in this case). I am surprised your beta version is still working. You need to upgrade to 8.2 or have the vi downgraded to 8.0
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Just one speaker wont work and its not the speaker

the rear left speaker is...well..has no sound but random crackling, i've switched speakers and its still the same thing on that channel, i've switched the wires still the same thing on that channel. there is nothing wrong with the speaker or the wire, the rear right speaker is just fine. i suspect the rear left plug is screwed. Also in windows it is set to 7.1 in the sound options thing.
Does anyone have any ideas what could be the problem?
Message Edited by AuToFiRE on 03-13-2007 12:16 PM

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Notebook.
We will surely assist you with this.
According to the error message you have posted I suspect there could be a hardware issue on your Notebook.
It could be possible that the Hard Drive on the Notebook could be corrupted or it might have bad sectors.
I strongly recommend you to contact HP Technical Support over the Phone for further assistance
Commercial Notebook Support - 1800 334 5144 [Say Business Notebook in IVR and wait for the engineer]
Consumer Notebook Support - 1800 474 6836 [Say Get Tech Support and wait for the engineer]
Hope this helps for any further queries feel free to join us again
"I work for Hewlett-Packard"
* * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
* * * * * Please mark Accept As Solution if it solves your problem * * * * *
Regards,
K N R K

After upgrading iOS5, my apps were deleted. Truing get them back, and only partially, the other apps, apple store is changing me again. Tried to restore and and sent an error. Now the Ipad won´t even boot. Can anyone help, besides Apple?

The iOS5 erased all my apps. Went to get them back and only part of it was recognized by Apple store. The others the store prompts to pay. I tried to go back to the old system and restore but as it was in sync an error ocurred and now I don´t have even the operating system. It won´t rebbot. I am afraid it will not stop searching the booting system until batery is dead and it will take many hours.
Any chance somenone ran into the same problem that could help?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

I have 2 ipad 2s. On the newer one I can log in and update to IOS 5 with no problem. On the older one I get the message "Your Apple ID has been disabled." Why does it work on one ipad and not on the other?

I have 2 ipad 2s. On the newer one I could log in and update to IOS 5 withno problem. On the older one I get the message "Your Apple ID has been disabled." No other explanation. Why can I log in on one ipad and I'm disabled on the other?

Well, I spoke too soon. Yes, I'm using the same account on both iPads, but I just changed my password for the umpteenth time and now I get the disabled message on both iPads. Just yesterday I was able to upgrade one to IOS 5 but got the error message on the other. I'm getting more confused by the minute.

T6060 possible problem/error of production...Central speaker is weaker and faded than the others

Similar Messages

Maybe you are looking for