T61p dual monitor with docking station, maximum resolution

I wonder what is the maximal resolution one can get with the quadro fx 570m. I specially want to reach the 2560x1600+2560x1600 with two 30'' monitors. Does anyone know about it or have experience with it?
dual monitor with docking station

You will need the huge docking station with Dual-Display Port & DVI. Then it should work, but you will only be able to use 2 displays at once (one external+laptop LCD or 2 external). But I think you already know that.
VGA on such resolution would be suicidal and i doubt it would even work.
ThinkPad T61p | 15,4 WSXGA+ | Intel Core2Duo T9300 2.5GHz | 4GB CL4 DDR2 RAM | nVidia Quadro FX 570M | Win7 Ultimate x64

Similar Messages

W540 + Ultradock: External monitors not showing correct maximum resolution

I have three 20" LCD monitors and the Ultra Dock. I am connecting them as: 1 with VGA, 1 with DisplayPort to DVI cable and 1 with DVI cable.
The ones one the DisplayPort and one with DVI both show a max resolution of 1280x1024 even though the monitor has a native resolution of 1600x1200. The VGA connected monitor shows the correct maximum resolution.
When I connect the DVI cable to into the mini-displayport connection on the laptop itself, that same monitor shows the proper 1600x1200 resolution.
Is there some limitation here preventing me from using the full 1600x1200 resolution through the dock?
Solved!
Go to Solution.

Solved!
My dock already had the same version as the update file. Plus, the description of item fixed did not match my issue. I had no blinking or missing screens, I had too low of resolution.
...But I have found the solution on my own.
Surprisingly I have not see it discussed anywhere on this forum. I found the answer here:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gjde49ww.txt
It contains the following information:
In Standard mode, all dock displays uses Integrated Graphics as display output
and is limited to a maximum of 3 displays including Computer's LCD.
While in Advanced mode, all dock displays uses Discrete Graphics as display
output and it increases the maximum number of displays to 6 including Computer's LCD.
Also:
ThinkPad W540 (Standard Mode)
Intel HD Graphics
- (Computer's LCD)
- Computer's analog VGA connector
- Computer's DisplayPort connector
- Docking Station's analog VGA connector
- Docking Station's DVI connector(s)
- Docking Station's DisplayPort connector(s)
- Docking Station's HDMI connector
NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
- No display is connected to this display adapter.
ThinkPad W540 (Advanced Mode)
Intel HD Graphics Family
- (Computer's LCD)
- Computer's analog VGA connector
- Computer's DisplayPort connector
NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
- Docking Station's analog VGA connector
- Docking Station's DVI connector(s)
- Docking Station's DisplayPort connector(s)
- Docking Station's HDMI connector
Something about this really prevents the resolution I wanted.
I switched to advanced mode in the BIOS as such:
The procedure below allows user to select "Standard mode" or "Advanced mode"
1. Power off the computer.
2. Power on the computer.
3. While the "To interrupt normal startup, press Enter" message is displayed
at the lower-left area or lower-center area of the screen, press the F1 key.
The ThinkPad Setup menu will be displayed.
4. Choose "Config" then "Display" to show the menu.
5. Select "Video Mode on Dock" and press Enter.
6. Select "Standard" or "Advanced" for your preference
7. Press F10 key and select "Yes" to save and exit from Setup menu. Then the
computer is restarted.
After a few reboots, I have proper resolution on all displays.
Not sure if there are any downsides to advanced mode, but it certainly feels like it is my solution. This gets me back to what just worked fine with the W530 I had before this.

Simplest way to support dual monitor with HP 2570P

Hi,
I would like to be able to use my dual monitors with my HP 2570P. I do not yet have a docking station.
What is the simplest way to support dual monitor display with my HP 2570P ?
I'm not looking for mirror i am looking for an extended desktop. I can live with out the laptop display if required.
I know there was a previous post about the 2540 but I'm not sure if the outcome applied to 2570p too.
thanks
Richard.

There is no truly simple way except use of a docking station.
You can use the VGA port or the display port. None of the manuals I have seen assert that you can use them both simultaneously.
There is no a previous post about the 2540 in regards to using a dual external display setup in the forum that I have seen.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Anyone grasped dual monitors with Lion yet?

I know it's fairly early days, but I cannot seem to get dual monitors with full screen Apps sussed out. It seems the second monitor doesn't like to join in the fun.

It's absolutely ridiculous. One of the key selling points of full screen apps was to take away the distractions of the window furniture, menu and dock - letting you focus on what's important, now what do we get to distract us - in my case a 1600x1200 linen pattern on my second monitor. Daft.
FWIW - I don't think the 'film reel' approach mentioned above would be a good a solution - as it assumes the 2 full screen apps to want to view are adjacent, and since Mission Control rearranges spaces to suit the 2 apps may not continue to be adjacent. Surely though it would be easy enough to allow a different full screen app on the second screen (which would be excellent imho), I tend to have a development window open and a browser on the second screen - having both full screen is exactly what I'd want to view. Alternatively, having the second screen as a plain 'Desktop' space would be acceptable (at least then I could open the apps I want in a non-fullscreen manner).
I don't think this is going to limitted to edge cases either - earlier today I was typing out an email, and needed to calculate a quick sum to include (mail was fullscreen) - in order to call up calculator I need to go : Mission Control, Switch to Desktop Space, Locate calculator, Perform calculation, remember it, mission control, switch to Mail Space, type calculation answer - ironically one can't even trigger Spotlight and do the calculating in there - as menubar is disabled when creating an email - but anyway, I digress.
Other than this (admittedly major) issue, I find full screen apps a great way to work - and even with this issue, they're a huge boon when I'm using the laptop sans extra monitor.
Regards,
Ryan

Dual monitors with macbook closed

i am running dual monitors with Macbook Pro and would like for my Macbook to be closed. How do I change that setting?

How do I change that to two separate extended screens.
I don't believe you can. Check with Matrox, but my understanding is that the external monitors running through the Matrox box will always function as a single extended desktop in two parts.
If you do check with Matrox about this, please post back with your findings — I'll be interested to know, whether I'm right or not.

Dual Monitor with PXI-8108

I am trying to use dual monitors with a PXI-8108 and the NI DVI splitter as described here
http://digital.ni.com/public.nsf/allkb/0E993D33675CD46A862572D50072C6A3
There must be some software update I need because I don't not have an option for the second monitor? Does anyone
know what I may need to update, possibly the graphics driver, and where to find it?
I have (2) mobile intel 4 series express chipset family listed under my device manager
driver version 6.14.10.5009

Are you trying to use three monitors with the setup in question there? Adding another set of splitters could impact the signal quality depending on your monitors and needs.
I'm not aware of a specific test with that setup, but given the correct adapter types and correct signal sources on each adapter, I would imagine you may be able to get it to work.
Again, as with the above posts, reference the linked Discussion Forum thread in the first post here, as you are going to be looking at similar questions in that case.
Timothy S.
PXI & VXI Platform Product Support Engineer

I want to run dual monitors with my hp compaq dc5800 small from e7400 @ 2.8ghz

I want to run dual monitors with my hp compaq dc5800 Small From e7400 @ 2.8ghz. Will it work and what video card do you recomend?

Yes, I see that I was in error when I posted that. Sorry.
The quickspecs for any dc5800 state that it has a:
(1) low profile PCIe x16 (SDVO/ADD2) slot.
Accordingly, the only card you can install would be this one...
https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/99/DY674A.htm
I have edited my original reply to represent the correct info.

Can Pavillion dm4 with Intel HD Graphics support monitor with 2560 X 1440 resolution?

Trying to upgrade my monitor. It is hooked with HP Pavillion DM4 laptop. Can Pavillion dm4 with Intel HD Graphics support monitor with 2560 X 1440 resolution? Thanks.
Hetn

Need full model number and Intel HD version (4000, 4600?) and which port you are using. Generally HDMI output is capped at full HD; 1920 x 1080.

Labview for laptop with dock station.

I use labview on desk top computer and it works fine. But, after I use it on a laptop with dock station, it does not work. I use the exact setting and configuration and I have no idea why does not work? Any suggestion. Thanks.

There isn't any kind of information you've provided for anyone to be able to help you.
"It does not work" could mean millions of things. How is it not working?
What "exact setting and configuration" are you talking about?
Does it work when the laptop is not on the docking station?

How can I use my Macbook as a dual monitor with my iMac?

How can I use my Macbook as a dual monitor with my iMac?

Then you want to use what's called Target Display Mode.
iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable
Target Display Mode And Thunderbolt

IPod will not work with docking stations

My 5th gen iPod works fine except it will not work with docking stations. I can sync it with my computer and it plays fine, just won't work with docking stations and other accessories like the Belkin FM radio converter. I bought a iMode boom box and it does not work properly with my iPod.
Any ideas??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Also:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Dual monitor setup with Docking station and W500 on windows 8

Hi there
I have a w500 with ATI Radeon 3650
Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now.
Any solutions out there? I don't care about catalyst control center, or which drivers I have to use, just give me back my two monitors connected to a docking station

I have the same W500 setup and have had no luck finding Windows 8 drivers on Lenovo's site or AMD's. I have a support ticket in to Lenovo to see what they come up with. I have two flat panel monitors that I need to work. According to MS, Catalyst Control Center has compatibility issues with Win8. It was easy to set up both monitors under Win7 with CCC. I have not been able to set them up using Windows display setting in Control Panel. Does anyone out there know of an app that I can use to replace CCC and run two monitors?
kb5

T510 dual external monitors without docking station

Hi, didn't find this one in google or at this forum...
can I connect 2 external monitors with resolution 1600X900 to t510 without any docking station? (one to the VGA and the other to the HDMI port). do I need the Nvidia m3100 or some other graphic card to support this? or the internal intel cpu graphic card can handle this?
same question above about 3 external monitors...

I've got a T510 with the Optimus graphics (4313CTO), one monitor connected to VGA, the other connected to the DisplayPort. According to this: http://www-307.ibm.com/pc/support/site.wss/MIGR-76617.html,
I should be able to connect two external monitors, but it only allows on active external monitor at-a-time. Is that support site inaccurate? I would assume having to video cards would allow two external monitors, but this seems to be an issue for this laptop.
Best Regards,
Mike

Dual Screen ThinkPad W520 with docking station

I'm trying to use an external monitor with my docking station to extend my desktop but I can't get it to work.
I'm using the intel HD video card and I already followed thoses guide
https://wiki.archlinux.org/index.php/Intel
https://wiki.archlinux.org/index.php/Xo … ual_screen
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "old intel stuff"
Driver "intel"
Option "Shadow" "True"
Option "DRI" "false"
EndSection
/etc/modprobe.d/modprobe.conf
options i915 modeset=1
/etc/mkinitcpio.conf
MODULES="intel_agp i915"
FILES="/etc/modprobe.d/modprobe.conf
mkinitcpio -p linux
reboot
The output of xrandr -q is VGA1 disconnected even if it's plugged in the dock or the laptop itself.
Do you guys have any clues?
thanks

I'm not sure what log message I should look at. I already looked at the Xorg log
[ 184.940]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 184.941] X Protocol Version 11, Revision 0
[ 184.941] Build Operating System: Linux 3.1.5-1-ARCH x86_64
[ 184.941] Current Operating System: Linux DUDE-ARCHLINUX 3.2.1-1-ARCH #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012 x86_64
[ 184.941] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/216a6a09-6be1-47c8-8147-377642302ba6 ro quiet splash
[ 184.941] Build Date: 17 December 2011 09:17:41AM
[ 184.941]
[ 184.941] Current version of pixman: 0.24.0
[ 184.941] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 184.941] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 184.942] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 24 09:14:51 2012
[ 184.951] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 184.980] (==) No Layout section. Using the first Screen section.
[ 184.980] (**) |-->Screen "Screen0" (0)
[ 184.980] (**) | |-->Monitor "Monitor0"
[ 184.980] (**) | |-->Device "Device0"
[ 184.980] (==) Automatically adding devices
[ 184.980] (==) Automatically enabling devices
[ 185.024] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 185.024] Entry deleted from font path.
[ 185.043] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 185.043] Entry deleted from font path.
[ 185.043] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 185.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 185.044] Entry deleted from font path.
[ 185.044] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 185.044] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 185.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 185.044] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 185.044] (II) Loader magic: 0x7ccae0
[ 185.044] (II) Module ABI versions:
[ 185.044] X.Org ANSI C Emulation: 0.4
[ 185.044] X.Org Video Driver: 11.0
[ 185.044] X.Org XInput driver : 13.0
[ 185.044] X.Org Server Extension : 6.0
[ 185.046] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21d1 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 185.046] (--) PCI: (0:1:0:0) 10de:0dfa:17aa:21d1 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 185.046] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 185.046] (II) LoadModule: "extmod"
[ 185.075] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 185.089] (II) Module extmod: vendor="X.Org Foundation"
[ 185.089] compiled for 1.11.3, module version = 1.0.0
[ 185.089] Module class: X.Org Server Extension
[ 185.089] ABI class: X.Org Server Extension, version 6.0
[ 185.089] (II) Loading extension MIT-SCREEN-SAVER
[ 185.089] (II) Loading extension XFree86-VidModeExtension
[ 185.089] (II) Loading extension XFree86-DGA
[ 185.089] (II) Loading extension DPMS
[ 185.089] (II) Loading extension XVideo
[ 185.089] (II) Loading extension XVideo-MotionCompensation
[ 185.089] (II) Loading extension X-Resource
[ 185.089] (II) LoadModule: "dbe"
[ 185.089] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 185.090] (II) Module dbe: vendor="X.Org Foundation"
[ 185.090] compiled for 1.11.3, module version = 1.0.0
[ 185.090] Module class: X.Org Server Extension
[ 185.090] ABI class: X.Org Server Extension, version 6.0
[ 185.090] (II) Loading extension DOUBLE-BUFFER
[ 185.090] (II) LoadModule: "glx"
[ 185.090] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 185.104] (II) Module glx: vendor="X.Org Foundation"
[ 185.105] compiled for 1.11.3, module version = 1.0.0
[ 185.105] ABI class: X.Org Server Extension, version 6.0
[ 185.105] (==) AIGLX enabled
[ 185.105] (II) Loading extension GLX
[ 185.105] (II) LoadModule: "record"
[ 185.105] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 185.106] (II) Module record: vendor="X.Org Foundation"
[ 185.106] compiled for 1.11.3, module version = 1.13.0
[ 185.106] Module class: X.Org Server Extension
[ 185.106] ABI class: X.Org Server Extension, version 6.0
[ 185.106] (II) Loading extension RECORD
[ 185.106] (II) LoadModule: "dri"
[ 185.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 185.117] (II) Module dri: vendor="X.Org Foundation"
[ 185.117] compiled for 1.11.3, module version = 1.0.0
[ 185.117] ABI class: X.Org Server Extension, version 6.0
[ 185.117] (II) Loading extension XFree86-DRI
[ 185.117] (II) LoadModule: "dri2"
[ 185.118] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 185.118] (II) Module dri2: vendor="X.Org Foundation"
[ 185.118] compiled for 1.11.3, module version = 1.2.0
[ 185.118] ABI class: X.Org Server Extension, version 6.0
[ 185.118] (II) Loading extension DRI2
[ 185.118] (II) LoadModule: "intel"
[ 185.119] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 185.135] (II) Module intel: vendor="X.Org Foundation"
[ 185.135] compiled for 1.11.2, module version = 2.17.0
[ 185.135] Module class: X.Org Video Driver
[ 185.135] ABI class: X.Org Video Driver, version 11.0
[ 185.135] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 185.136] (--) using VT number 7
[ 185.148] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 185.148] drmOpenDevice: node name is /dev/dri/card0
[ 185.148] drmOpenDevice: open result is 8, (OK)
[ 185.148] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 185.148] drmOpenDevice: node name is /dev/dri/card0
[ 185.148] drmOpenDevice: open result is 8, (OK)
[ 185.148] drmOpenByBusid: drmOpenMinor returns 8
[ 185.148] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 185.148] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 185.148] (==) intel(0): RGB weight 888
[ 185.148] (==) intel(0): Default visual is TrueColor
[ 185.148] (**) intel(0): Option "DRI" "false"
[ 185.148] (**) intel(0): Option "Shadow" "True"
[ 185.148] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 185.148] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 185.149] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration disabled.
[ 185.149] (**) intel(0): Relaxed fencing enabled
[ 185.149] (**) intel(0): Wait on SwapBuffers? enabled
[ 185.149] (**) intel(0): Triple buffering? enabled
[ 185.149] (**) intel(0): Framebuffer tiled
[ 185.149] (**) intel(0): Pixmaps tiled
[ 185.149] (**) intel(0): 3D buffers tiled
[ 185.149] (**) intel(0): SwapBuffers wait enabled
[ 185.149] (==) intel(0): video overlay key set to 0x101fe
[ 185.149] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 185.149] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 185.149] (II) intel(0): Output VGA1 has no monitor section
[ 185.150] (II) intel(0): EDID for output LVDS1
[ 185.150] (II) intel(0): Manufacturer: LEN Model: 40b1 Serial#: 0
[ 185.150] (II) intel(0): Year: 2009 Week: 0
[ 185.150] (II) intel(0): EDID Version: 1.3
[ 185.150] (II) intel(0): Digital Display Input
[ 185.150] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 185.150] (II) intel(0): Gamma: 2.20
[ 185.150] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 185.150] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 185.150] (II) intel(0): First detailed timing is preferred mode
[ 185.150] (II) intel(0): redX: 0.610 redY: 0.348 greenX: 0.316 greenY: 0.589
[ 185.150] (II) intel(0): blueX: 0.151 blueY: 0.066 whiteX: 0.313 whiteY: 0.329
[ 185.150] (II) intel(0): Manufacturer's mask: 0
[ 185.150] (II) intel(0): Supported detailed timing:
[ 185.150] (II) intel(0): clock: 108.5 MHz Image Size: 345 x 194 mm
[ 185.150] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
[ 185.150] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
[ 185.150] (II) intel(0): Supported detailed timing:
[ 185.150] (II) intel(0): clock: 90.4 MHz Image Size: 345 x 194 mm
[ 185.150] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
[ 185.150] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
[ 185.150] (II) intel(0): Unknown vendor-specific block f
[ 185.150] (II) intel(0): LP156WD1-TLB2
[ 185.150] (II) intel(0): EDID (in hex):
[ 185.150] (II) intel(0): 00ffffffffffff0030aeb14000000000
[ 185.150] (II) intel(0): 0013010380231378ea43c59c59519626
[ 185.150] (II) intel(0): 11505400000001010101010101010101
[ 185.150] (II) intel(0): 010101010101622a404061842a303020
[ 185.150] (II) intel(0): 350059c2100000195323404061842a30
[ 185.150] (II) intel(0): 3020350059c2100000190000000f00a9
[ 185.150] (II) intel(0): 0932a9092816090030e40002000000fe
[ 185.150] (II) intel(0): 004c503135365744312d544c423200e2
[ 185.150] (II) intel(0): EDID vendor "LEN", prod id 16561
[ 185.151] (II) intel(0): Printing DDC gathered Modelines:
[ 185.151] (II) intel(0): Modeline "1600x900"x0.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz)
[ 185.151] (II) intel(0): Modeline "1600x900"x0.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz)
[ 185.151] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 185.151] (II) intel(0): Printing probed modes for output LVDS1
[ 185.151] (II) intel(0): Modeline "1600x900"x60.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz)
[ 185.151] (II) intel(0): Modeline "1600x900"x50.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz)
[ 185.151] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 185.151] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 185.151] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 185.151] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 185.151] (II) intel(0): EDID for output VGA1
[ 185.151] (II) intel(0): Output LVDS1 connected
[ 185.151] (II) intel(0): Output VGA1 disconnected
[ 185.151] (II) intel(0): Using exact sizes for initial modes
[ 185.151] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 185.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 185.152] (II) intel(0): Kernel page flipping support detected, enabling
[ 185.152] (**) intel(0): Display dimensions: (448, 254) mm
[ 185.152] (WW) intel(0): Probed monitor is 350x190 mm, using Displaysize 448x254 mm
[ 185.152] (**) intel(0): DPI set to (90, 90)
[ 185.152] (II) Loading sub module "fb"
[ 185.152] (II) LoadModule: "fb"
[ 185.152] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 185.153] (II) Module fb: vendor="X.Org Foundation"
[ 185.153] compiled for 1.11.3, module version = 1.0.0
[ 185.153] ABI class: X.Org ANSI C Emulation, version 0.4
[ 185.153] (==) Depth 24 pixmap format is 32 bpp
[ 185.153] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 185.157] (II) UXA(0): Driver registered support for the following operations:
[ 185.157] (II) solid
[ 185.157] (II) copy
[ 185.157] (II) composite (RENDER acceleration)
[ 185.157] (II) put_image
[ 185.157] (II) get_image
[ 185.157] (==) intel(0): Backing store disabled
[ 185.157] (==) intel(0): Silken mouse enabled
[ 185.157] (II) intel(0): Initializing HW Cursor
[ 185.223] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 185.227] (==) intel(0): DPMS enabled
[ 185.227] (==) intel(0): Intel XvMC decoder enabled
[ 185.227] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[ 185.227] (II) intel(0): direct rendering: Disabled
[ 185.227] (==) intel(0): hotplug detection: "enabled"
[ 185.227] (--) RandR disabled
[ 185.227] (II) Initializing built-in extension Generic Event Extension
[ 185.227] (II) Initializing built-in extension SHAPE
[ 185.227] (II) Initializing built-in extension MIT-SHM
[ 185.227] (II) Initializing built-in extension XInputExtension
[ 185.227] (II) Initializing built-in extension XTEST
[ 185.227] (II) Initializing built-in extension BIG-REQUESTS
[ 185.227] (II) Initializing built-in extension SYNC
[ 185.227] (II) Initializing built-in extension XKEYBOARD
[ 185.227] (II) Initializing built-in extension XC-MISC
[ 185.227] (II) Initializing built-in extension SECURITY
[ 185.227] (II) Initializing built-in extension XINERAMA
[ 185.227] (II) Initializing built-in extension XFIXES
[ 185.227] (II) Initializing built-in extension RENDER
[ 185.227] (II) Initializing built-in extension RANDR
[ 185.227] (II) Initializing built-in extension COMPOSITE
[ 185.227] (II) Initializing built-in extension DAMAGE
[ 185.254] (II) AIGLX: Screen 0 is not DRI2 capable
[ 185.254] (II) AIGLX: Screen 0 is not DRI capable
[ 185.582] (II) AIGLX: Loaded and initialized swrast
[ 185.582] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 185.583] (II) intel(0): Setting screen physical size to 448 x 254
[ 185.918] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 185.918] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 185.918] (**) Power Button: Applying InputClass "keyboard-layout"
[ 185.918] (II) LoadModule: "evdev"
[ 185.919] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.932] (II) Module evdev: vendor="X.Org Foundation"
[ 185.932] compiled for 1.10.99.902, module version = 2.6.0
[ 185.932] Module class: X.Org XInput Driver
[ 185.932] ABI class: X.Org XInput driver, version 13.0
[ 185.932] (II) Using input driver 'evdev' for 'Power Button'
[ 185.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.933] (**) Power Button: always reports core events
[ 185.933] (**) Power Button: Device: "/dev/input/event3"
[ 185.933] (--) Power Button: Found keys
[ 185.933] (II) Power Button: Configuring as keyboard
[ 185.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 185.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 185.933] (**) Option "xkb_rules" "evdev"
[ 185.933] (**) Option "xkb_model" "evdev"
[ 185.933] (**) Option "xkb_layout" "us, ca"
[ 185.933] (**) Option "xkb_options" "grp:caps_toggle"
[ 185.997] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 185.997] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 185.997] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 185.997] (II) Using input driver 'evdev' for 'Video Bus'
[ 185.997] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.997] (**) Video Bus: always reports core events
[ 185.997] (**) Video Bus: Device: "/dev/input/event4"
[ 185.997] (--) Video Bus: Found keys
[ 185.997] (II) Video Bus: Configuring as keyboard
[ 185.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 185.997] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 185.997] (**) Option "xkb_rules" "evdev"
[ 185.997] (**) Option "xkb_model" "evdev"
[ 185.997] (**) Option "xkb_layout" "us, ca"
[ 185.997] (**) Option "xkb_options" "grp:caps_toggle"
[ 185.999] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 185.999] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 185.999] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 185.999] (II) Using input driver 'evdev' for 'Video Bus'
[ 185.999] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.999] (**) Video Bus: always reports core events
[ 185.999] (**) Video Bus: Device: "/dev/input/event5"
[ 185.999] (--) Video Bus: Found keys
[ 185.999] (II) Video Bus: Configuring as keyboard
[ 185.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5/event5"
[ 185.999] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 185.999] (**) Option "xkb_rules" "evdev"
[ 185.999] (**) Option "xkb_model" "evdev"
[ 185.999] (**) Option "xkb_layout" "us, ca"
[ 185.999] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 186.000] (II) No input driver/identifier specified (ignoring)
[ 186.001] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 186.001] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 186.001] (**) Sleep Button: Applying InputClass "keyboard-layout"
[ 186.001] (II) Using input driver 'evdev' for 'Sleep Button'
[ 186.001] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.001] (**) Sleep Button: always reports core events
[ 186.001] (**) Sleep Button: Device: "/dev/input/event2"
[ 186.001] (--) Sleep Button: Found keys
[ 186.001] (II) Sleep Button: Configuring as keyboard
[ 186.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 186.001] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 186.001] (**) Option "xkb_rules" "evdev"
[ 186.001] (**) Option "xkb_model" "evdev"
[ 186.001] (**) Option "xkb_layout" "us, ca"
[ 186.001] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.002] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 186.002] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 186.002] (**) Integrated Camera: Applying InputClass "keyboard-layout"
[ 186.002] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 186.002] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.002] (**) Integrated Camera: always reports core events
[ 186.002] (**) Integrated Camera: Device: "/dev/input/event8"
[ 186.003] (--) Integrated Camera: Found keys
[ 186.003] (II) Integrated Camera: Configuring as keyboard
[ 186.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event8"
[ 186.003] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 186.003] (**) Option "xkb_rules" "evdev"
[ 186.003] (**) Option "xkb_model" "evdev"
[ 186.003] (**) Option "xkb_layout" "us, ca"
[ 186.003] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.004] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 186.004] (II) No input driver/identifier specified (ignoring)
[ 186.004] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 186.004] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 186.004] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-layout"
[ 186.004] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 186.005] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.005] (**) AT Translated Set 2 keyboard: always reports core events
[ 186.005] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 186.005] (--) AT Translated Set 2 keyboard: Found keys
[ 186.005] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 186.005] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 186.005] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 186.005] (**) Option "xkb_rules" "evdev"
[ 186.005] (**) Option "xkb_model" "evdev"
[ 186.005] (**) Option "xkb_layout" "us, ca"
[ 186.005] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.006] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 186.006] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 186.006] (II) LoadModule: "synaptics"
[ 186.006] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 186.016] (II) Module synaptics: vendor="X.Org Foundation"
[ 186.016] compiled for 1.11.0, module version = 1.5.0
[ 186.016] Module class: X.Org XInput Driver
[ 186.016] ABI class: X.Org XInput driver, version 13.0
[ 186.016] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 186.016] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 186.016] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 186.016] (**) Option "Device" "/dev/input/event9"
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 186.346] (**) Option "TapButton1" "1"
[ 186.346] (**) Option "TapButton2" "2"
[ 186.347] (**) Option "TapButton3" "3"
[ 186.453] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 186.453] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 186.560] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 186.560] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 186.560] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 186.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 186.561] (II) No input driver/identifier specified (ignoring)
[ 186.562] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[ 186.562] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 186.562] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 186.562] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.562] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 186.562] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[ 186.562] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 186.562] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 186.562] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 186.562] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 186.562] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 186.562] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 186.562] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event10"
[ 186.562] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 186.562] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 186.562] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 186.563] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 186.563] (II) No input driver/identifier specified (ignoring)
[ 186.564] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 186.564] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 186.564] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard-layout"
[ 186.564] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 186.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.564] (**) ThinkPad Extra Buttons: always reports core events
[ 186.564] (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 186.564] (--) ThinkPad Extra Buttons: Found keys
[ 186.564] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 186.564] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[ 186.564] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 186.564] (**) Option "xkb_rules" "evdev"
[ 186.564] (**) Option "xkb_model" "evdev"
[ 186.565] (**) Option "xkb_layout" "us, ca"
[ 186.565] (**) Option "xkb_options" "grp:caps_toggle"
Last edited by mtetreault (2012-01-24 14:17:56)

X201 with Docking station not able to connect to Samsung Monitor

When the Samsung (SyncMaster 2053BW) VGA connect directly to X201, the monitor works fine. When the Samsung VGA connect thru docking, Monitor is blank. Why?

hey alin0902,
hard to say why. have you tested the Samsung with another laptop that has a docking station ? does it work? or does it work only if the Samsung is connected directly into the other laptop ?
if it does not work with a different laptop that is docked, we suggest contacting Samsung for assistance.
if it does work, while being docked.. what you could do is to uninstall the current video driver of your X201. let windows install its own generic driver.
once done, dock the unit and try again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

T61p dual monitor with docking station, maximum resolution

Similar Messages

Maybe you are looking for