TA25981 I have set up my base station, no problem, but I can not locate my set up assistant to complete the process to work with our iPads. It is Mac OS X 10.7.2. Anyone help?
I have set up my ariport extreme base station, no problem, but I can not locate my airport assistant to continue to work wirelessly with our ipads. When you click on the airport base station, it only shows the info about the base station. The assistant will not come up. Can anyone help? It is a Mac OS X 10.7.2.
Not sure what you mean by "assistant".
Assuming that you have set up the AirPort Extreme to broadcast a wireless network, you need to connect to that wireless network from each iPad or other wireless device.....just like you would connect to a network at the coffee place or bookstore.
On an iPad....
Tap Settings on the home screen
Tap Wi-Fi on the left panel
Tap on the name of your new network when it appears
Tap in the password
Tap Join
Similar Messages
-
I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Read through this for information about Airprint printers and how to use them:
http://support.apple.com/kb/ht4356 -
HT204053 i have put in my apple id and password but still can not get imessage and facetime to work
I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks
Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in -
I was given an iMac without iPhoto. Have updated to OS to 10.6.8. How do I get a version of iPhoto that will the updates will work with? Downloaded 9.2.1 and it looked for 9.1; downloaded 9.1 and it looked for 9.0??
You can Purchase iPhoto in the Apps Store...
-
I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!
Expanding on what deggie said, with an iPad 1 the app you're using must support video out. Only the iPad 2 can mirror the screen. The apps included with the iPad that output to external monitors are given here:
http://support.apple.com/kb/HT4108
For third-party apps, consult the app's documentation or contact the developer.
Regards. -
The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!
Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH. -
I have recently updated my iPhone to ISO6, since then i can not locate my purchased ringtones on either iTunes or the phone itself but they do appear in my billing history. How do i retrieve these?
You only get one download.
Did you fail to save them to your computer and back them up. -
Question
I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! It's almost as if something is blocking it ffrom completing the process. Please helpNext time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
I had an Itunes account on another computer & another Iphone, I have tried to access my previous account to add some new tones from my new Iphone & can not locate or access my previous account or previous library. Can someone help?
I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes. -
I used my iPod yesterday, and it was charged. I put it on the floor, and took it into my room before I went to bed. I wanted to check what I missed while I wasn't using it, but it was "off". I put it on the charger, and it should've been charged up by morning. It still didn't turn on. I tried plugging it into my iMac, but nothing happens when I plugo in my iPod, but works with my iPad. My home button is also jammed, and I've tried to get it To work again, but I've had no luck.
Is there something I can do to turn my iPod on again?Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.
How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX. -
How do I use my M Audio M track Plus with the logic pro 9 software? It works with garageband, but I am not getting anything out of Logic. It does show up on list as option and I have done all of the sound preferences to M audio, etc. etc. Please help
I got to that page but clicking on the Subscribe Free had no effect.
Nothing showed in the Podcasts nor the iTunes U.
In fact I also subscribed to Stanford's lectures and despite actually managing to DL them there is still no subscription in iTunes U, just the Intro to Computer Science belatedly.
Peter
I'd like to attach the screen grab of the out of order and randomly DLed selection of Harvard's course, but the forum won't let me attach it even though it is only 456k. Correction, close post and retry and now it lets me. NB how intermittent the DLs are and in no particular order. -
A simple problem, but I can not slove:Why this setter() getter() error?
when I run tomcat , the tomcat page show this error:
Error creating bean with name 'springappController' defined in ServletContext resource [WEB-INF/springapp-servlet.xml]: Error setting property values; nested exception is org.springframework.beans.NotWritablePropertyException: Invalid property 'productManager' of bean class [SpringappController]: Bean property 'productManager' is not writable or has an invalid setter method. Does the parameter type of the setter match the return type of the getter? org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1058)...................................
It says that there is wrong property defined inside springapp-servlet. xml due to my setter() and getter() has problem,
the springapp-servlet. xml file where I defined this controller bean is like follows, the error warning place is highlighted :
<bean id="springappController" class="SpringappController">
<!-- add this part after we create ProductManager and modify the controller and hello.jsp-->
<property name="productManager"> <ref bean="prodMan"/>
</property>
</bean>
<bean id="prodMan" class="bus.ProductManager">
<property name="products">
<list>
<ref bean="product1"/>
<ref bean="product2"/>
<ref bean="product3"/>
</list>
</property>
</bean>
the place I define my setter() and getter() is appspringController class, which is:
package web;
import org.springframework.web.servlet.mvc.Controller;
import org.springframework.web.servlet.ModelAndView;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import java.io.IOException;
import java.util.*;
import java.util.Map;
import java.util.HashMap;
import bus.Product;
import bus.ProductManager;
public class SpringappController implements Controller {
//logger for this class and subclass
protected Log logger=LogFactory.getLog(getClass());
private ProductManager productManager;
public ModelAndView handleRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
String now=(new java.util.Date()).toString();
logger.info("returning hello view with"+now);
Map myModel=new HashMap();
myModel.put("now",now);
myModel.put("Products", productManager.getProducts());
return new ModelAndView("hello","model",myModel);
}//end of HandleRequest
public void setProductManager(ProductManager pm){
productManager=pm;
public ProductManager getProductManager(){
return productManager;
}//end of controller
I do not see any error of my setter() and getter() method in the SpringappController, and I do not know where is wrong inside the springapp-servlet. xml file. could any one help me?
Message was edited by:
Mellon
Message was edited by:
Mellon
Message was edited by:
Mellon
Message was edited by:
Mellonhi vibhaa
Can you please explicitly put what you meant by lost a class,I think he miss typed the path of the class. e.g.
if the class name is Product.java in the package com -> src -> packs ->
he must have typed as
com.src.Product in stead of
com.src.packs.Product
I am having a similar problem and would like to know the solution. Just check you path as I mentioned earlier, if the path is alright, then make sure you have declared your class as "public".
let me what is happening with it. -
How can I get photoshop elements to work on my mac with Yosimite??
Yes, that is correct. The organizer is just a database, so your photos are wherever you put them intially. Did you import from iphoto? In that case, organizer does make duplicates (to avoid writing into the iphoto library, which would be a Bad Thing to do). If you didn't specify a location, the copies that PSE uses will be inside subfolders in the Adobe folder in your Pictures folder.
-
I have a dvd stuck in the drive and as I can not boot is there a way of removing the dvd ?
Hi
I have a dvd stuck in the drive and as I can not boot is there a way of removing the dvd ?Boot with the option key down. You will see a window showing all the bootable systems. Select the OSX boot and hit return. Once you are booted into OSX, use the Startup Disk system preferences to change your default boot volume.
Startup Manager: How to select a startup volume
Maybe you are looking for
-
Problems in creating Queue tables
Hi I'm trying to create a Queue table. For that I'm creating a new Object, and then a table type of the same Object and then a Queue table of the payload type of the created table type, for which I'm getting an error. I'm using the following list of
-
How to create a logon process in iWeb
My version of iWeb does not appear to have the universal password protect of the webpage function [even thought the Apple documentation says you can]. Has anyone created a iWeb page which requires a user to logon with a user name and password [it can
-
Apple should make transfer for iPhone 4 users to iPhone 5c
Old users can get for free iPhone 5c. Apple have many iPhone 5c models but they are not famous and now you get it?
-
What are advantage and disadvantage for Physical Standy and Logical Standby
HI, What are advantage and disadvantage for Physical Standy and Logical Standby configuration? Thanks Ken
-
While working in a collection, I would like to view only the pictures with likes: the ability to filter/sort on likes. This way I can ask my clients to give the pictures a like (via shared Lightroom collection on the web), so I know which pictures to