TA48312 Can I put Snow Leopard 10.6.8 on my Powermac G5?

I have a Powermac G5 with Leopard 10.5.8 on it and would like to upgrade to Snow Leopard 10.6.8 or better if possible. My specs are as follows:
Model Name:                    Power Mac G5
Model Identifier:                PowerMac7,3
Processor Name:              PowerPC G5 (3.0)
Processor Speed:             1.8 GHz
Number of CPUs:              2
L2 Cache (per CPU):         512 KB
Memory:                          4 GB
Bus Speed:                      900 MHz
Boot ROM Version:           5.1.8f7
Serial Number (system):    G851****QPL
<Edited by Host>

No. Snow Leopard requires an Intel processor.
Why do you ask?
Allan

Similar Messages

I have mac mini os x mountain lion can i put snow leopard on the partition

I have a mac mini os x mountain lion can i put snow leopard on the partition

on the same partition? no. you'll need to create another partition if you want to dual boot, and install SL there.

Can i put snow leopard on a mac mini server? MORE INFO BELOW

Hi! I am getting a mac mini server in august (new hdmi type) and i dont want server becuase i am a home user. can i buy and install regular snow leopard (preferably mac box set) and will there be any software isues? questions: [email protected]

Double posting the same question is a good way to confuse everyone. I suggest you close at least one of these.
See your other posting for my reply.
Allan

I took Lion off my Macbook Pro and put Snow Leopard back on and now I can't access Mail or iPhoto. How do I get Mail and iPhoto to work with the Snow Leopard I just put back on?

Hi. I was having slowness problems with my Macbook Pro and thought I would re-install Lion but put Snow Leopard back on by mistake. I bought the computer used with Lion on it and don't have access to the USB drive or a username/password to reinstall Lion. Now I can't access Mail or iPhoto since I put Snow Leopard on.
Is there a way to get my Mail and iPhoto working again with Snow Leopard or do I have to "re-upgrade" to Lion?
Thanks!
Steve

You can't. When you converted those libraries to Lion's format, you lost the ability to go backwards. Unless you saved a bootable backup./clone or Time Machine backup of your previous SL installation, you're up the proverbial creek w/o a paddle.

Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

Trying to update laptop. Putting snow leopard on so I can then buy lion for icloud. after restarting the laptop keeps going on and off. is this normal. white screen too.

Hi
I am trying to update my laptop to Lion for icloud. I am trying to put snow leopard on first but after putting in the disk and restarting my screen is white and it constantly sounds as if it is trying to start or close. Is this right? Thanks

So far so good (I asked because you've posted in the forum for PPC iMacs…).
So what SL disc are you using? The retail 10.6.3 disc (white with the snow leopard pic) or a grey disc borrowed from another Mac?

Can't install Snow Leopard on a MacBook

Hi guys...
A friend of mine brought me his Macbook to fix it because the hard drive was making sounds and now won't boot.
The drive in fact is bad, it barely mount, makes noises, etc.
I've replaced the internal hard drive for a Toshiba 320gb SATA 3.
The thing is that apparently the DVD doesn't recognize my drive and of course, i can't install Snow Leopard.
My question is, is this a problem with the new drive?. I believe that being a SATA3 could be causing the problem.
Second question... Can i install Snow Leopard (somehow) using my Mac mini?
Thanks so much and i hope you can help me.
Regards.
Francisco.

Hi!!
>I've used another internal hard drive and installs correctly<
Using the DVD installer?
Yes
So it boots with another hard drive in there but ejects when you put the Toshiba in there?
Yes but it only make sense if the DVD would create a temporary partition or something in order to install the OS.
>Could it be that the drive is SATA3? <
Even so it would be downwards compatible.
I though so too
>or maybe the hd is bad?<
That would make more sense.
I'm going to clone the installation that went OK in order to see if it's actually my internal drive the problem.
Could it be the manufacturer?
Thanks so much and i'll let you know.
Regards.
Francisco.

New MacBook Pro - How Can I install Snow Leopard?

I have a brand new MPB from Apple that comes with Lion pre-installed. I didn't ask for this, even though I ordered the computer a few days before Lion came out.
Lion has been a disaster, from random crashes, to breaking software (including Apple's own Motion and Cinema Tools), to draining the battery after 3 hours or less. Does anyone know of any way possible to put Snow Leopard on this computer? I have the SL install disc (10.6.3), but I get an error message that it cannot be installed. If I try to start from he disc, I get a kernel crash.
Thanks for any suggestions.

I am not sure if you will be able to go back to a lower OS if could be built into the firmware to not let this install happen. You can give this a try, You will need to start the system with your Mac OS X 10.6 snow leopard dvd then format the drive with disk utility, then do the install.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

The current version of Aperture requires 10.7.5 or later.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Can I install Snow Leopard now?

I previously asked a similar question, but can I install Snow Leopard 10.6.3 in a VM, update it to 10.6.8, and then copy files to a partition on my hard drive? I have 10.6.3 retail version. (mid 2011 iMac)

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
1. Create a new partition on the hard drive.
2. Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard
        system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the
               COMMAND and R keys until the menu screen appears. Alternatively, restart
               the computer and after the chime press and hold down the OPTION key until
               the boot manager screen appears. Select the Recovery HD and click on the
               downward pointing arrow button.
          After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.           In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.           Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB
flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's
internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
You will need a retail copy of Snow Leopard. If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.

How to put Snow Leopard onto new partition along with Yosemite

Made a second partition on my 2010 iMac that had only one Yosemite partition before. I thought it was supposed to wipe out the original partition when creating another one but much to my surprise Disk Utility merely shrank the size of the Yosemite partition. Result: Yosemite 3.9 TB and new partition (that I want to put Snow Leopard onto) is less than 100 GB. New partition shows under devices in Finder. When I insert Snow Leopard installation CD of course I'm told that I cannot install on this computer or at least this partition. When I restart and hold down the option key the only choice I have is the original partition with Yosemite but not the Snow Leopard partition. So...can anyone tell me what to do to get the Snow Leopard OS onto the second/new partition?

ehstoker wrote:
Didn't work. When I held down the C key I got the black screen with white letters saying that basically I had crashed the computer.
That sounds like your disc is unable to install Snow Leopard - what install disc are you using? Is it grey or a white disk with a Snow Leopard printed on it? Grey discs are for a specific model & cannot be installed on other models. If you can provide a copy of the error message we may be able to help (an image or some of the final output may help). We are left assuming it may be a kernel panic.
The white 'cat' disc is a retail version that can be installed on compatible Macs.
ehstoker wrote:
When I restarted and held down the Option key, I got what I said before which is "the only choice I have is the original partition with Yosemite but not the Snow Leopard partition".
That sounds correct - you don't appear to have managed to install 10.6 yet so you can't select that as a boot option.

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music and pics? And keep them synced up as I purchase more?

Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

I can't install Snow leopard on my hard disk which has 10.4.11 on and lots of space.

I can't install Snow leopard on my hard disk which has 10.4.11 on it and lots of space, I run the snow Leopard install disk and it says it cant be installed on my hard disk, which has 160 GB of space.

Which iMac? If it's a G5, the highest OS you can run is Leopard. Are you using the full retail copy of Snow, or a grey, machine specific disc from another computer? If it's the latter, that's the reason.
Message was edited by: WZZZ

Can I install Snow Leopard on MacBook Pro 2013

Can I install Snow Leopard on my new MacBook Pro 2013. I'm so tired of the UGLY grey icons. I keep thinking that the mail or iPhoto window is not the active one because everything is grey. I use Snow Leopard on my 27inch iMac and love it. Nice RED delete button for mail, etc. Thanks

Firmware restrictions prevent directly loading any OSX earlier than what came with the system.
The *only* way around is to load SnowLeopard *Server* (not Client) into a virtual machine (Parallels, VMWare Fusion, VirtualBox). But that costs $20+shipping/tax for the disk and is a learning curve into SL Server. And you *still* need your host OSX to run it, and the VM will not most efficiently use the hardware resources.

TA48312 Can I put Snow Leopard 10.6.8 on my Powermac G5?

Similar Messages

Maybe you are looking for