TAB and SUB-TAB

Hi Experts, i need some help plz:
Iu2019m working in transaction RECN. In a TAB (which named Objects) there is another tab (which named Assignment).
I have added 2 fields in the section <Objects> (I do it using the way which in Note OSS 690900). In fact, the 2 fields must be displayed in the session "Object" of the sub-tab: Assignment.
In transaction recacust, I cannot find the location of standard fields of tab Assignment.
Is there any OSS Note that describes how to find sub-tabs?
Thanks,
Mehdi,

Hi Mehdi,
please check transaction FOI2,
there you will find filed group 100 which should be exactly what you are looking for.
You can find all necessary transactions concering BDT and RE-Fx by using transaction BUS0.
Looks like this subscreen might still be configured via re classic, at least on a 4.7 II system, which is what I am using right now.
Hth
Ute

Similar Messages

Book numbering properties window – Section and Sub-section grayed out

In FM 12, I have a book composed of one front-matter file and 9 chapter files. The chapters (1-9) auto-numbered without any problems and pagination is correct. I want to add section and subsection numbers. Within each file I added autonumber format tags to the headers used specifically for section and subsection titles on the first chapter page and autonumber format tags within the body of the chapters. The autonumber tags are –
<$chapnum>.<$sectionnum>\t
<$chapnum>.<$sectionnum>.<$subsectionnum>\t
for paragraph tags Heading 2 and Heading 3, respectfully.
When I select numbering in the book file window and click on either the Section and Sub-section tab, the windows are grayed out. I know I'm missing something obvious. I've gone through help files, manuals and tutorials for hours and can't find what I need. Any advice about where I can look to sort this out?
Thank you.

Almost, but not quite. FM books (now) have the ability to specify internal Folders and Groups. You can then assign (i.e. move) the relevant FM files into these structures to create more of a hierarchical structure in the book - see: Adobe FrameMaker 12 * About books and also see: Numbering in Hierarchical Books « TechComm Central by Adobe
Once the file is assigned to a folder or sub-folder, then the section and subsection numbering properties become available for that file.

How to organize my photos in albuns and sub-albuns?

Hi,
I have Windows PC and wanted to know how to organize my photos in folders and sub-folders inside the Ipod.
By sincronizing Ipod with a specific folder of your hard disk, all images are updated, but sub-folders are ignored. For instance, if you sinc the My Photos folder:
c:\My Photos\2004\Family
c:\My Photos\2004\Friends
The Family and Friends photos will be cast together, because Ipod only sees one sub-level (the 2004 folder). Can anyone help with this? I tried the Photoshop Album, but I didn't manage to understand this program!
Thanks!
Carletti
Ipod Video Windows XP

As far as I know your only option is either Adobe Album or Photoshop Elements. (Not Album SE or a trial version)
Once you've got your photo's imported, there are two tabs on the righthandside, tags and collections (? - I have a non-english version). Create a new collection and drag photo's on it or rightclick on a photo and select "Add to collection..."
Now when you use iTunes to sync photo's from Adobe it will show the collections you've made and each collection you synchronise will show up with a separate name on your ipod.
3G - Nano - 5G Windows XP
Windows XP

How to get the values of all elements and sub elements from following xml

how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>

avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519

Email and sub acounts

Is there any way I can move my email and sub accounts over to my verizon business accounts?

Yes, depending on your services you'll need either a "repoint" or a "scrub." You will have to contact Verizon's tech support to get it done though. They have options available on their Contact Us page.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Creating a table based on Category and Sub-Categories

Hi
I am building an extensive home budget. I have 3 tables showing, monthly, quarterly and annual costs. These tables contain Categories and Sub-Categories. I have created a table and chart to show the percentage of the total costs for each Category. For the two Categories with the largest percentage of the total cost I would like to create a table (and chart, no problem, based on my first template) showing the breakdown of the Sub-Categories. However this information is to be retrieved from 3 tables, and I was hoping to create the table automatically. If not I must individually go to each different table and find the relevant Sub-Category and manually input the text and link the cell for the value to my new table. This gives room for error in my opinion and is a nuisance as my budget file now contains about 8 sheets so even on 27" iMac requires a considerable amount of scrolling around.
Am I expecting too much of Numbers or missing something totally? I do not have much experience of spreadsheets, just basic tables and calculations in Excel before coming over from the Dark Side!
Many thanks for any advice
Shirley

Hi Barry
Many thanks for your reply and apologies for my delay in responding.
Hope I am doing this photo embedding correctly via Flikr:
Page 1
I apologise also for my incorrect terminology - please bear with me on this, unfortunately I never used Excel much so terminology is pretty much my own . I believe that I have one sheet, which then changes into different numbers of pages depending on the page size I set, so with these examples 4 pages. 14 tables and one chart at this time
The tables on the second screenshot were the only way I could figure out how to retrieve the data for the final table and chart (% Total Monthly Expenses)
Now what I want to do is for each (or in fact the three largest) budget categories is to give a breakdown of what in that category is, percentage wise, costing the most. Preferably, I want to get this breakdown category information automatically so that human error is ruled out (that I cannot overlook an entry in the any of the tables in my first example). Perhaps I am asking too much, but I thought it was worth asking!
Again many thanks for responding and for your help with this
regards
Shirley

Creation of new employee groups and sub groups

Hi All,
What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this?
Its urgent pls.......
Good replies will be rewarded!!!!
Regards,
Sita

Hi
You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
And define the employee subgroups and assign them to the employee groups Like
Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
Regards

I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Current Day Bank Statement post to GL and Sub-Ledger

Hello SAP Friends,
I need help on Current Day Bank Statement. Appreciate your input/help/opinion.
My client wants to update Current day bank statement to G/L and Sub-Ledger so that any electronic payment received from customer updated in real-time. As the sale cycle is very short about a week, they do not want to wait to update book with prior day bank statement.
SAP standard functionality allows creating memo record from current day bank statement to reflect Correct Cash Position.
Can someone share there experience for Current day bank statement posting and how process has been managed technically?
Thanks for all help.
Suresh

Hi,
When Manual bank statement is run, a JV gets posted knocking of subledger with debit or credit (Payment/Deposit) and one line item will be posted in the main bank account.
In you scenario, take the document available in the main bank account and reverse it in transaction code FBRA. This will knock off all the balances and the ledger will be zero.

SharePoint 2010 View Group By Category and Sub-Category

I have a document Library with Category and Sub-Category columns. In the view I am grouping by Category and then Sub-Category. However, most of the documents do not have a Sub-Category. My desired result would be that the document would appear underneath
the Category. However, if no Sub-Category is assigned then SP creates a generic Sub-Category and puts the document there. It should look something like this:
Category : Main Category
Document-1
Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4
Instead it is Creating a generic SubCategory:
Category : Main Category
Sub-Category : (1)
    -Document-1
    -Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4

Hi，
Per my knowledge, when you set group by Category and then Sub-Category, it should looks like the following:
Category : Main Category
Sub-Category : (2)
    -Document-1
    -Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4
I think there is no OOTB method that could make it looks like the following:
Category : Main Category
Document-1
Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is there a way to color layers and sub layers in Fireworks?

Hello all,
I'm trying to find a way to colorize the layers and sub layers in the layer panel in Fireworks CS5.5, like you can in Photoshop. I work in a small web design company doing GUI design and when I pass the files on to the developers they are asking for easier ways to sort the content of various layers and sublayers at a glance. In Photoshop you can apply a color to a layer or group in the layrs panel and that works great for an internal labeling scheme. Is there anything like this built into Fireworks or are there any add-ons from a 3rd party etc. that would allow this? It wold save a lot of trouble and time for us. I can't find anything anywhere about it, but it may be that my search terminology is poor. I'm not sure how you would word a search for this kind of feature. I keep getting information about applying colors to shapes etc rather than colorzing the labeling of layers panel itself.
Thanks in advance for any help or information!

Thanks for the information,
I was relatively certain there wasn't a native way to do this. I was hoping maybe someone had created a plug-in but as you say, I could see where it would be very difficult to modify the internal workings of the software like that.
I went ahead and put in a feature request per the link you provided... maybe someday that will do some good haha! I use sublayers and pages currently and have on a few occasions used states. I have a few options that are open to me if it were just me doing the work but I work with a couple developers and they know how to get around in Fireworks enough to make a slice and select needed objetcs (as long as I group complex shapes and mult-tier effects) but that is about all they do and are willing to know about "design" software lol! They like the sublayers because I think it's similar in behavior to the database and coding software they use. I have convinced them of the beauty of pages for alternate colors and versions of the same site but that is about as far as they are willing to go right now.
They want to mainly be able to quickly turn off specific text and certain effect layers as needed so they can sort slicing faster and see where the desired objects and layers are at a glance. We've been using sub layers to break things up between these components but they aren't as happy with that because it still means often having to read the names on the layers palette and when you have an extensive project with many items in the layers panel, it gets hard to read at times. It also addes even more folders to sort through becuase of the high level of specicifity. It's not a deal breaker, just a way to speed up the workflow and keep tension down haha! The onion method sounds interesting but I'll have to demo it first and see how easy it is to fool with hiding various combinations... you know how "coders" can be sometimes
Thanks for the input! Here's to hoping Adobe thinks this feature is worth it in the future! Can't see where it would be terribly difficult to add!

My Categories and sub-categories are now missing

I installed new PSE12 on my Win7x64. I previously had PSE9 installed.
My Categories and sub-categories are now missing? I need to know how to reinstall them and auto attach to my pictures?
<moved by mod from downloading,installing,setting up - kglad>

So, did you import your pictures in a new catalog in PSE12? That can only restore tags which were specifically 'written to files' in the Organizer.
As a matter of fact, the solution in your case is not an 'import' via the 'get photos and videos... from files or folders'.
It's a catalog conversion, which creates a new PSE12 version from your old one. This is done in the File menu, catalogs... option : the catalog manager. There is a 'convert' button which you use to search and convert catalogs of any older version (shortcut Ctrl Maj C).
http://helpx.adobe.com/elements-organizer/using/creating-editing-catalogs.html#use_convert _a_catalog_of_a_previous_version
and:
http://helpx.adobe.com/photoshop-elements/kb/common-catalog-issues-upgrade-elements.html

Degree Symbol and Sub-Scripts in XML

I'm more of a designer and really don't know that much about code. I know just enough XML to use it in InDesign, the thing is I am having trouble finding a way to use the degree symbol and sub-scripts in the XML data I import into InDesign. The HTML codes like &deg and &#176 don't work, InDesign tells me that they are "not well formed". I'm using UTF-8. Is there another encoding I could use that allows me to use symbols and subscripts?

if you use utf-8 simply but the real character into the data.
named character entities such as
°
has to be declared in your dtd.
with character entities such as
° or °
are working fine.
regards,
gregor

Change employee group and sub group

Hi all,
During the new hire if an employees group and subgroup are enetered wrongly, how shouldl they be corrected. We have scenarios when the emplooyes group and sub group are corrected after a month or so and the users want to correct the same
How do we do it?

Goto PA40 reselect the same Hire action for this employee and click execute. In IT0000 screen enter the new EG/ESG.
and save it. Then Save the IT0001, then fill rest of the infotypes.
If you have already process the payroll and the new Emp group / Sub group is in different payroll area you wont be able to change it.

Jsp code (js code) to display(tree) the files and sub folders in a folder

Hi all
plz can any one send me the source in jsp or js to display in tree structure for files and sub folders in a folder.

There are dozens of Javascript tree widgets available on the Internet. Some are free. Some are good. Google will find them for you.
(The only relevance of JSP to your question is that yes, you can generate HTML that uses one of those Javascript tree widgets.)

TAB and SUB-TAB

Similar Messages

Maybe you are looking for