Tab between cells and Editor in JTable

I placed a cell editor in a JTable column JTextField.
After I type something in this editor and press tab it stays in the same cell and when I press tab again then it goes to the next column.
How can I correct this so that after I type something in the cell and press tab I want it to go to the next column directly in JTable.
Thanks.

I'd have to see your code to tell you what's wrong. I tried it this way and had no problem.
TableColumn tc = table.getColumnModel().getColumn(2);
tc.setCellEditor(new DefaultCellEditor(new JTextField()));by the way, I don't think you need to explicitly set the cell editor component to JTextField. It uses that by default.

Similar Messages

Tab between cells and celleditor in JTable

I placed a cell editor in a JTable column JTextField.
After I type something in this editor and press tab it stays in the same cell and when I press tab again then it goes to the next column.
How can I correct this so that After I type something in the cell and press tab I want it to go to the next column directly in JTable.
Thanks.

I'd have to see your code to tell you what's wrong. I tried it this way and had no problem.
TableColumn tc = table.getColumnModel().getColumn(2);
tc.setCellEditor(new DefaultCellEditor(new JTextField()));by the way, I don't think you need to explicitly set the cell editor component to JTextField. It uses that by default.

I can no longer tab between cells in a table with pages 5.0.

I use pages everyday for filling in my work booking sheets. I need to have them synching to the cloud, so I can access the client information while on the road.
My booking sheet is basically a large table with many cells for name, address, phone number, etc. In pages 4.3 I could enter some information into the cell, hit the tab button, and it would go straight to the next cell in the table. This was a quick and easy way for me to fill out my forms on the computer.
Well, since the update, the tab button only moves the cursor over in the same cell, as opposed to the next cell. It is VERY rare to need to tab in a cell, as opposed to going to the next cell.
I did figure out that I could Option+ Tab to move to the next cell, but it is very hard to change my procedure of tabbing after all this timing doing it the other way.
Am I just missing a preferance to tab between cells, instead of inside a cell?
Thanks
Dave

Option-tab makes sense and can be done with the left hand's thumb/forefinger.
Using tab was always arse-backwards as it defeated the use of tab within the table cell.
Best to use both for what they always do:
Option tab or an arrow key (singular) to jump cells
tab to jump to the next tab in the text wherever it is within or without cells.
The contrary precedence was set by Microsoft and was a bad idea. In good UI you do not have shortucts reverse roles such that you need to pay excessive attention to the context.
Peter

Command-tab between Safari and another application

When I command-tab between Safari and another application such as Word, when I return to Safari I am on a different web page. When I use History to return to the page I want, I have to sign back in again. How can I fix this?

It's CS4 6.0.3 on OSX.
The other application is a web app in development.
My guess now is Flash compiles the fonts and it sees Antihistory regular as Antihistory book and our website is expecting regular.

Contrast mismatch between Organizer and Editor

I can edit an image in Editor to where it looks great, to include the contrast, brightness, shadows, etc. When I send it back to the Organizer, it look much too contrasty and dark. When I use the same images in a slideshow originating in Organizer, they still look too contrasty. Is there a way to correct this? I'm using PSE 10 on a Windows 7 -64 bit machine. Thanks for any ideas.

Thanks for your quick response. I just checked out the settings in both the Editor and Organizer and they're both set on "let me decide". I'm not sure what to do on that one. I could go with optimizing the computer screen with sRGB, or the Adobe RGB for the printer, or no management, or decide on the fly. If I go with the computer, I guess I'd have to change it when I print a photo out, and vice versa. Have any suggestions for me? Thanks again.
New update. I have a Dell color laser printer, and I just checked the manual. It offers both sRGB and AdobeRGB. My priority is really to have a good printout. If I check sRGB I should be safe for either print or computer, but I'm wondering if I'd get as good a printout with sRGB as with AdobeRGB. The easiest might be to see what the printer is curently set on, and then set PSE Organizer and Editor to match it. I'll do that, and then see if that helps the mismatch between Organizer and Editor.

ICloud not synchronizing tabs between MacBook and iPhone

Okay so first off, hello! And let me start by saying that I found a topic about this from September last year. This did, however, not help me at all. Anyway so, apparently my tabs is not synchronizing between my iPhone 5 and MacBook Pro anymore. The last time it synchronized was six days ago on the 20th, and I know that because there's a tab I can open on my computer that takes me to a topic that was written that exact day and has date and time stamp. I noticed, however, that a tab I opened this morning on my iPad HAS synchronized with my iPhone... So I really haven't got a single clue what is going on but I am getting extremely annoyed that it hasn't synchronized for a week now!
And no, private browsing is NOT enabled on my phone OR my computer, so that's definitely not it. I've never had it enabled anyway, but yes I have checked just to be sure, and it's disabled. So I really don't know what is going on, and I'd really like to have this fixed. Again, a tab i opened on my iPad this morning has synchronized with my phone and not with my computer. So I'm guessing it's my computer there's something wrong with?
If anyone could help, I'd be very happy!
Thanks,
Maya

Make sure all your iOS devices and your Mac are signed into the same iCloud account, and that your iOS devices have Safari set to On in Settings>iCloud, and that your Mac has Safari checked in System Preferences>iCloud. If your settings are correct and open tabs in Safari on your Mac are not listed in iCloud tabs on your iOS devices (and vice versa), go to System Preferences>iCloud, uncheck Safari, restart your Mac, wait a minute or so, then recheck Safari. See if this resolves things.

Kind of broken communication between Organizer and Editor PSE 9

Hi,
Today I when I opened my PSE 9 Organizer to select and edit some photots uploaded yesterday, when I selecrt3ed the photos and clicked Fix>Full Photo Edit menu, the Editor opened fine, BUT no photo appeared on the Editor as always. This is the first time this happens and I have been working for more than a year with PSE9 without any problems.
Now, in order to edit the selected photos on the organizer, once the Editor opens (showing no photo) i have to open the Editor´s Project Bin at the bottom and then select "show files selected in the organizer" and there they are, but this didn´t happened before.
Thanks for any help.
Diazruanova
Windows 7 x64 Home Premium

Thanks a lot Barbara,
Maybe I did not explain myself very well, but what I have been doing for a long time, was selecting one ...or several pictures for editing from within the organizer, and after the Editor opened, there was always a picture on the body of the Editor, ready to be edited, but NOT so anymore since today in the morning. It is not a big deal, because as I explained on my first post, now I have to look for the pictures in the Editor´s project bin and select the one I like to edit, but it is odd that this just happened today after almost two years of being working the other way.
Is there some way to repair the installation of PSE9?
Greetings from Mexico

Task switching (APPLE+TAB) between apps and spotlight window not possible

Hi, I opened a spotlight window to search for some items by pressing ALTCMDSpace and ran my search query. Then I task switched to my other app to look at some info, but when I tried to task switch back to the open Spotlight window I was unable to do so. The only way to get back to it was either to Exposé or to press ALTCMDSpace again. Not a natural flow to the way I and most other people probably work. Is this normal/a feature? I am sure it wouldn't be hard for Apple to add the hook to show the Spotlight window in the Task List (CMD+TAB)

Hi, John.
Unfortunately, that's the way it works: You cannot Command-Tab to the Spotlight window. I see this as a design glitch, aka a "feature." As you note, it can be found using the Exposé "All Windows" (F9) function.
To let Apple know how you feel about this, I suggest you submit a Mac OS X Feedback. All Feedbacks are read and used to prioritize development investments.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

No interaction between organizer and editor

When my students select fotos in there catalogue and choose any action (f.e. photomerge or quick editing...), nothing happens only the editor starts but it shows no foto's.

Hi Ken
It's PSE10 on Windows8. The very strange thing is that on my PC (teacher login) every thing works fine but on the studentpc it doesn't. I didn't try to login with another login, but tomorrow i will.
PS: Nothing starting from the Organizer works. Even if the only select some pics in the organizer they can't see it in the Editor. R-click won't do it either...
Kristtlijntje

Association between Jcheckboxes and lines of JTable

Hello everybody,
I would like to add a JChekBox to each line of my JTable knowing that the number of lines is given only at the time of the execution. The problem is that the contructor of JscrollPane can take only one JComponent in parameters:
JScrollPane scrollpane=new JScrollPane(MyJTable);
How can I make association line-JChekBox dynamically.
I m waiting for your answers impatiently.
Thank you for being attentive

I don't understand your question. You where given a link to the JTable tutorial, that showed you how to add check boxes to the table.
This is done by adding Boolean values to the TableModel. So once you know the number of rows in the table you create a simple loop and do:
table.setValueAt(row, new Boolean(true) );

V 31. installed would not connect to internet, restored to 30, now the pinned tabs due not persist between starting and closing FF.

Installed version 31.0 from version 30.0. It would not display any web pages, e.g. google, had a message about not being able to connect. Did a Windows system restore point to version 30 (I had created a restore point before the install) . FF will now not save pinned tabs between sessions and it will not restore the last page from a previous session. All it will display is the Default FF page.
Can someone give me some idea's about how to fix this. I tried reinstalling version 30 but that did not work to fix the problem.
Greg

Hi,
First, thanks for everyone responding. Here is what the problem was....
For some reason, there is a profile under Local in Mozilla and another profile under Roam. The Roam profile was the one that was being pointed to from the Troubleshooting tab under help. The local profile only had some partial files not including sessionstore.js. I copied all the files from the Roam profile to the Local profile. This restored the pinned tabs but not the open tabs from the previous session. I then updated Roam and Local profiles with the last sessionstore I could find in the Roam directory.... for some crazy reason this restored everything. Updating to FF v 31 was what initially caused this.
I did create a restore point before the update, which would not connect any tabs to the internet (e.g. Google). I then restored from the restore point, and ended up with the damaged FF v30 installation, which would connect to the internet but would not pin tabs and remember them or display the last page I had visited as a start page....
So, I hope someone gets a chance to look at FF v31, and why there is a Roam and Local directory with profiles in them ?
Thanks
Gv

JTable - help with custom cell renderers and editors

I've got myself into a bit of a mess with cell renderers and editors.
I've got a custom component that wants displaying in a column and then hand over all functionality to this component when you start editing it.
Now how I went out about this was to create a custom cell renderer that extends this component and implements TableCellRenderer.
I then created a table cell editor that extends AbstractCellEditor and implements TableCellEditor and this cell editor creates a new component when it's initialized. I then use setCellEditor(new MyCellEditor()) on the column and setCellRenderer(new MyCellRenderer()).
This works slightly but I'm wondering how this is all implemented.
When I set the cell editor on it's own it seems to be sharing a reference to the single component that's being used which means that if you edit one cell all the cells get changed to the new value.
Thanks for the help,
Alex

only a few forums are actually browsedAnd theSwing forum is one of the most active. Did you search it for editiing examples? I've seen many editing examples posted in a SSCCE format.
SSCEE is also impossible as the functionality spans over about 10 classes We did not ask for your application, we asked for a SSCCE. The whole point of a SSCCE is to simplify the 10 classes into a single class and maybe an inner class for the editor to make sure you haven't made a silly mistake that is hidden because of the complexity of your real application.

JTable with JPanel form as cell renderer/editor

I have a JTable that uses a custom cell editor/renderer. The cell editor/renderer is a JPanel form with labels and text panes. As the user edits the information, I adjust the table row height (setRowHeight) and the JPanel layout manager updates the layout on the cell editor. This all seems to work fine. However, when the user exists the cell and the cell renderer is shown, it has the correct new row height but has not been correctly layed-out for the new row height. How do I force my cell renderer to be re-layout after the editor closes?

That does not seem to work. I have done the following:
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int r, int c)
this.table = (EditorTable) table;
row = r;
column = c;
if (isSelected)
setBackground (Preferences.selectedRowBgColor);
else
setBackground (formBg);
// constructs the panel components
setCellValue (value);
revalidate();
return (this);

How to switch between 2 Parent Tab Sets main and main2

Hi,
I have the following structure:
Parent-Tab-Set: main
Parent-Tab : Parent 1
Child-Tab : Child 1
Parent-Tab : Parent 2
Child-Tab : Child 2
Parent-Tab-Set: main2
Parent-Tab : Parent 3
Child-Tab : Child 3
Parent-Tab : Parent 4
Child-Tab : Child 4
Now I want to create a new Parent Tab in main, but always creates it in main2
My goal:
Parent-Tab-Set: main
Parent-Tab : Parent 1
Child-Tab : Child 1
Parent-Tab : Parent 2
Child-Tab : Child 2
Parent-Tab : Parent 5
Child-Tab : Child 5
Who understand this Tab-Thing... ;)
Thanks, Juergen

Hi Kappy,
well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
WHY NOT???
Every other OS is able to differentiate between windows and not just applications.
Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
To me this is not modern, it is simply a weakness of the OS.
Cheers
Quartz84

What is the differents between Policies and Preferences in Group policy Management Editor

What is the differents between Policies and Preferences in Group policy Management Editor?

Policies: If you delete a policy in GPO it deletes its registry files form the clients. Policies don't tattoo the registry. Policies Settings are permanent as long policy is in effect i.e. Desktop Backgrond. Policies are applied at Computer
Startup, User logon and Manual and automatic refresh. Takes Precedence over Preferences.
Preferences: Even if you delete a policy form Preferences tab the registry files will still available on the systems. Preferences tattooed the registry if you want to remove the registry entries you have to do it manually. Preferences exampl
is i.e. mapped drive. Settings applied with preferences are not grayed out. Not available in Local GPO.
Usefull for
Desktop Icons/Shortcuts
Url
Drive Map
File Copy, Update, delete
Thanks

Tab between cells and Editor in JTable

Similar Messages

Maybe you are looking for