Tab Canvas : 1 data block 2 different query for each tab) Forms 10g

Hello allllll,
I have 2 blocks Master datail ,the master is non-db the tab canvas is for one data block:
Problem 1: How 2 display same data block in each tab.?
Problem 2: How when pressing excute Query button each tab display the data
----------------------specified by the Master block..?
Regards,
Abdetu..

-- When-New-Form-instance
IF :SYSTEM.Record_Status ='query' THEN
go_block('PLN_STOCK_TAKING_HEADER');
execute_query;
go_block('PLN_STOCK_TAKING_DETAIL');
execute_query;
go_block('PLN_STOCK_TAKING_DETAIL2');
execute_query;
END IF;
same behaviour,excute on tab2 not tab1,well i think it has something to do with the relation..!
Regards,
Abdetu..

Similar Messages

Navigation bar different colors for each tab

I want to have the top horizontal navigation bar with different background colours for each tab on the bar.
I don't want to change the background colour for the entire navigation bar. How do I change them individually?
thanks!

Hi lorrscorpio,
As far as I know it is difficult to change background color of top navigation link OOTB, better to create a html menu for that and add it to your page .In that you can easily change background color of your top navigation link.
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark As Answer

Different Intervals for each tab in Spry Widget TabbedPanels

Hi,
I have two tabs panels in my tab panels group and I would them to have different intervals between the two panels is this possible?
Heres my code for the tab panels:
<div id="TabbedPanels1" class="TabbedPanels">
      <ul class="TabbedPanelsTabGroup">
       <li class="TabbedPanelsTab" tabindex="0" onFocus="blur();">Tab 1</li>
       <li class="TabbedPanelsTab" tabindex="1" onFocus="blur();">Tab 2</li>
      </ul>
      <div class="TabbedPanelsContentGroup">
       <div class="TabbedPanelsContent">
               Tab 1 Content
      </div>
      <div class="TabbedPanelsContent">
               Tab 2 Content
     </div>
     </div>
</div>
and here's my code to specify the interval value at the moment:
<script type="text/javascript">

</script>
Thanks

-- When-New-Form-instance
IF :SYSTEM.Record_Status ='query' THEN
go_block('PLN_STOCK_TAKING_HEADER');
execute_query;
go_block('PLN_STOCK_TAKING_DETAIL');
execute_query;
go_block('PLN_STOCK_TAKING_DETAIL2');
execute_query;
END IF;
same behaviour,excute on tab2 not tab1,well i think it has something to do with the relation..!
Regards,
Abdetu..

TabBar - different color for each tab. How To?

(Flex3)
Fairly simple requirement: I have a TabBar and I want each tab to have a different color.
Seems like there should be a simple way to do this?
I thought I found an answer here, but I can't find it. Had something to do with retrieving each Tab instance from the TabBar and setting styles on it.
Thanx.

... woohoo!! got it by playing around (per usual)
    var tab:Tab = tabBar.getChildAt();
    tab.setStyle("backgroundColor", );   // sets the color when the tab is selected.
    tab.setStyle("fillColors", [, ]);   // sets the unselected fill
    tab.setStyle("fillAlphas",[, ]);   // optional

WAD: anyway to bind each tab of the tab page web item to different query?

WAD: anyway to bind each tab of the tab page web item to different query?
We check the properties of the tab page web item, but can't find we can bind the tab to some query.
Any idea?
Thanks!

will try to write as much detail steps as i can...
drag tab page web item in wad window
go to its properties
for e.g. u currently have only 1 tab page
than name tab page1 as p1
hit button with ..
this will let u add new heading to tab page 2
likewise save heading of 4 tab pages in properties of tab pages
now choose container web item
drag it in tab pages window
assign seperate analysis item in each container item
assign seperate queries in each analysis web item.
assign container1 to tab page1
assign container2 to tab page2
assign container3 to tab page3
assign container4 to tab page4
and their heading viceverssa
save it execute it
now u will have 4 queries in 4 container item and uc an see that in different tab pages.

Spry tabbed panels - Different Hover Class for each tab

Already posted this in the general Dreamweaver section, but just realized there was a specific Spry section. So, my apologies for the repost.
I'm setting up spry tabbed panels, and I'm wanting to use an image for each tab, with the text already on it. I've figured this much out by creating a different class for each in the spry tabbed panel css.
However, I'd also like to have a second hover image for each tab. I'm having trouble figuring out how to set up separate classes for each tab's hover state.
Any help?
Thanks.

Just in case you did not notice the announce at the top of this forum's main page, I have copied it here.
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Your question was not asked before
Using the search functionality on forums you can easily find out if your question has been answered before. While you are in search, you can specify the search locations. The Spry forum can be found under:
Adobe Labs > Spry Framework for Ajax
Yoru question can not be found in the existing documentation
Spry provides you with allot of documentation this can found on different locations. In the sidebar of this forum you can find a small summary of resources that will help you on your way.
If these options do not apply to your question, please be so kind to also supply the following information in your topic together with a clear description of your issue:
What browsers does this issue occure:
example: Internet Explorer 8 on Window 7 and Firefox 3.0 on Mac OSX
What version of Spry are using:
example: Spry 1.6.1 ( the version number can be found in license header of the .css and .js files )
What is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step to reproduce the issue:
example: Scroll down till you find the header "help", there you will see a Spry Accordion. When you click on it it will not open or close.
So users can provide you with a better answer, without having to ask you for further details.
by Arnout Kazemier at Oct 23, 2009 2:47 PM
landon_tc wrote:
Actually, I do remember posting that, and have updated it with what worked for me. However, I could not recall posting it in a specific ajax spry forum, so I assumed I just posted in the general forum. Hence the current situation.
Yeah and my name is not Ben Pleysier.
landon_tc wrote:
Any help with the current problem?
Please have a look at this thread http://forums.adobe.com/message/2662019#2662019
I hope this helps.
Ben Pleysier

Firefox on OS X 10.6.8: How to have a different input source for different tabs in one window (the option "Allow a different one for each document" is on)

Currently, firefox 29 keeps one language for different tabs in one window. Different windows can have different input sources...

Thank you for your reply!
I think I've accidentally marked the problem as solved, but in fact it's not.
What is needed is that the firefox remember different input methods (languages, for instance, En or Fr) for different tabs so that when I switch between several tabs I don't need to change the layout.
Chrome remembers my language settings for each tab, so it's not always one language for all the same tabs there. I haven't found such an option in Firefox so far.
Hope it's clear enough.
Thanks in advance.

How to insert more items for each tab in WAD 7.0

Hello to everyone,
My problem is confined to the WAD 7.0
I would like to insert 4 different queries into a new Web Template.
Two of them have to stay in one page and the others in one page each; therefore, the result would be a Web Template with three tabs.
Unfortunately the system creates automatically four different tabs with one query each.
Anybody knows how to insert more items in one page/tab?
Thank you very much
Savino Pompa

Hi Savino
In the WAD bring up the properites of the tabstrip_container web item, under the Internal Display group in the Tab Panel List, create 3 tabs, then drag 3 contatiner_layout web items into the tab web item.
In each conatiner item drag the analysis web item, 2 in the first container, then 1 each for the others, then point each analysis web item at a dataprovider(query).
Setup the contatiners so that the analysis items displays, to do this in the container properties create a row then on the following screen a column and then set the Subordinate web item to the analysis item, these web items control layout and are useful for dealing with multiple web items, for the first tab with 2 queries you will need to play with the layout, either 1 row 2 column or 2 row 1 column.
For each tab you created add the corresponding contatiner as the Subordinate Web Item in the Tab Panel parameters for each tab.
Hope this helps
Josh

Can Firefox 6 be configured to remember more than 5 prior pages for each tab so that the "go back one page" feature will allow me to retrace my steps as many as 20 pages back?

Before Firefox 5, the "go back one page" history would show 10 or more prior pages for each tab, so that I could go back quite a way in retracing my browsing steps. With Firefox 5.0.1 and 6, however, the list of prior pages seems to have been capped at 5. I would like to configure Firefox to remember 20 or 25 prior pages for each tab. Is there any way to do that?

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

How to configure different listener for each database in 11gR2 RAC

Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
Manish

Hi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish

How to set up different realms for each server ?

I am using weblogic 6 sp1.I have a domain with several servers. i want to assoicate or use different custom security realm for each server.However -on weblogic console- there is no 'Target' tab in the Security node ,and no way to set up multiple Security nodes.How ca i do this (or can i)?

Main reason why is this:
Imagine situation I have 2 servers A and B both of them bellongs to domain SomeDomain.
Server A is as WebServer and server B hosts all EJBs. And server A is outside
firewall (does not have DB access). But i would like to use RDBMS realm so what
to do in this situation. Place both servers in different domains and in server
A install proxy realm for RDBS realm ?
"Tom Moreau" <[email protected]> wrote:
>
You can't have a different realm for each
server. There is only one realm for all
servers - think of it as there is only
one set of authentication & authorization
information (that is users/groups/permissions)
and it applies to all servers.
Why do you want each server to have its
own realm? If someone tries to log in,
do you want WLS to automatically route
them to a server who is capable of logging
them in? I'm having trouble understanding
why you want this feature.
Thanks,
-Tom Moreau
Rachel <[email protected]> wrote:
I am using weblogic 6 sp1.I have a domain with several servers. i want
to assoicate or use different custom security realm for each server.However
-on weblogic console- there is no 'Target' tab in the Security node
,and no way to set up multiple Security nodes.How ca i do this (or can
i)?

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

Add different header for each page

We are using RTF templates to create XML Letters.
1) Is it possible to have different header for each page?
2) Can we have a data filed column in the header?
Thanks,

Ha ha, Thanks, that is exactly what I needed! How perfectly obvious, but somehow easy to miss! Thanks so much.
Eric

Different BOM for each month

Hi,
The BOM is different for each month. If i make different alternatives for each month and run the LTP will it help to get the raw material requirement as per the BOM for that month. Example BOM for NOV/DEC will be not same but we want to estimate the raw material req for next year.
Kindly advise what i need to do?
Regards
ShankarR

Dear Shankar,
1.What is the business contraint in using change number functionality to address this requirement without creating any
additional alternative BOM?
2.Say you create the first alternative BOM using a change number and save all the BOM components.
3.The default valid from date will be the valid from date of the change number and valid to date will be 31.12.9999.
4.Whenever there is a BOM change use a different change number with valid from date say 25.10.2010,so using this in the
same BOM delete the components and add the new component's or make any BOM change and save.
5.For the deleted components the valid from date will be say (you have created using today's date for BOM creation)
05.10.2010 and the valid to date will be 25.10.2010.
6.What is the advantage of creating new alternative BOM?
6.How are you using the LTP results for inventory purpose,say how are you planning the raw material's requirement for the
next year based on this year's BOM?
7.LTP is not only the feasibility of material procurement,but also production that can be produced with available resource.
Check and revert
Regards
S Mangalraj

I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?

I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?

You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.

Tab Canvas : 1 data block 2 different query for each tab) Forms 10g

Similar Messages

Maybe you are looking for