How to insert more items for each tab in WAD 7.0
Hello to everyone,
My problem is confined to the WAD 7.0
I would like to insert 4 different queries into a new Web Template.
Two of them have to stay in one page and the others in one page each; therefore, the result would be a Web Template with three tabs.
Unfortunately the system creates automatically four different tabs with one query each.
Anybody knows how to insert more items in one page/tab?
Thank you very much
Savino Pompa
Hi Savino
In the WAD bring up the properites of the tabstrip_container web item, under the Internal Display group in the Tab Panel List, create 3 tabs, then drag 3 contatiner_layout web items into the tab web item.
In each conatiner item drag the analysis web item, 2 in the first container, then 1 each for the others, then point each analysis web item at a dataprovider(query).
Setup the contatiners so that the analysis items displays, to do this in the container properties create a row then on the following screen a column and then set the Subordinate web item to the analysis item, these web items control layout and are useful for dealing with multiple web items, for the first tab with 2 queries you will need to play with the layout, either 1 row 2 column or 2 row 1 column.
For each tab you created add the corresponding contatiner as the Subordinate Web Item in the Tab Panel parameters for each tab.
Hope this helps
Josh
Similar Messages
-
How to insert page number on each page for Cross-Tab report?
Hi,
I have created a Cross-Tab in the section Report Header via Crystal Reports 11.
Now, I want to created more Cross-Tabs, and each page has one Cross-Tab.
So, I insert Report Headers to contain Cross-Tabs. But, the report only shows the page number at the last page.
How to insert page number on each page?
Thanks in advance.Hi,
Well, the easiest solution is to place the Cross-tab in the Report Footer, Of course, ONLY if the report contains this single object which I'm assuming is not the case.
If you do not wish to place the cros-tab in the Report Footer, here's what you need to do:
1) Create a formula;
whilereadingrecords;
2) Create a group on this formula. If the report already contains groups, move this formula to the top of the grouping list. It won't affect the other groups or records in any way.
3) Move the Cross-tab from the Report Header to the Group Header1 and suppress Group Footer1
4) Add the Page Number field to the Page Footer
Let me know how this goes!
-Abhilash -
How to insert more than 12 items using BDC for MB1C
Hi,
When we use LSMW for data transfer of MB1C transaction, more than 12 items can be inserted in a document.
But using BDC only 12 and below is possible, if the flat file system has more that 12 item, then the document is not created.
How to insert more than 12 item in a document.
RegardsHi Gow,
I have uploaded the MB1C through a BDC and it is working fine for n no of items.
Here is the code. May be this will be of your help.
*& Report ZMB1C
report ZMB1C
no standard page heading line-size 255.
type-pools : slis.
tables : t100.
data: begin of record,
MATNR(018),
ERFMG(017),
EXBWR(016),
end of record.
data : itab like table of record with header line.
data : w_bdcdata type bdcdata.
data : t_bdcdata type standard table of bdcdata initial size 1.
data : messtab type standard table of bdcmsgcoll with header line.
data : mstring(300).
data : vf_index type i,
no_lines type i,
count type i value 0.
data : v_bldat(20),
v_budat(20).
*Excel Sheet Data Upload Details
data : vf_start_col type i value '1', "start column
vf_start_row type i value '2', "start row
vf_end_col type i value '100', "maximum column
vf_end_row type i value '10000'. "maximum row
*/ Internal Table For Excel Data
data : it_excel type kcde_cells occurs 0 with header line.
*/ Field symbol
field-symbols : <fs>.
data : begin of it_messtab occurs 0,
plant(10) type c,
status(10) type c,
message(90) type c,
end of it_messtab.
*Data for ALV display
data : wa_fcat type slis_fieldcat_alv,
colcnt type i.
data : it_fieldcat type slis_t_fieldcat_alv,
i_events type slis_t_event.
data : l_title type sychar70.
data : l_repid like sy-repid.
* Selction Screen
selection-screen begin of block b1 with frame title text-000.
parameters : p_file like ibipparms-path obligatory,
p_mode like ctu_params-dismode default 'A'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-001.
parameters : p_bldat like MKPF-BLDAT obligatory,
p_budat like MKPF-BUDAT obligatory,
p_bwart like RM07M-BWARTWA obligatory,
p_werks like RM07M-WERKS obligatory,
p_lgort like RM07M-LGORT obligatory.
selection-screen end of block b2.
* At Selction Screen
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = ''
IMPORTING
file_name = p_file.
*Start of Selection Event
start-of-selection.
call function 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = p_file
i_begin_col = vf_start_col
i_begin_row = vf_start_row
i_end_col = vf_end_col
i_end_row = vf_end_row
TABLES
intern = it_excel
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
others = 3.
if sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
* WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if it_excel[] is initial.
MESSAGE I000(ZCL_TCSABAP).
else.
sort it_excel by row col.
loop at it_excel.
move : it_excel-col to vf_index.
assign component vf_index of structure itab to <fs>.
move : it_excel-value to <fs>.
at end of row.
append itab.
clear itab.
endat.
endloop.
endif.
if not itab[] is initial.
DESCRIBE TABLE itab LINES no_lines.
clear messtab.
refresh messtab.
CONCATENATE p_bldat+6(2) '.' p_bldat+4(2) '.' p_bldat(4) into v_bldat.
CONCATENATE p_budat+6(2) '.' p_budat+4(2) '.' p_budat(4) into v_budat.
perform map_rec.
call transaction 'MB1C' using t_bdcdata mode p_mode update 'A'
messages into messtab .
clear t_bdcdata.
refresh t_bdcdata.
loop at messtab where msgtyp = 'E' or msgtyp = 'S' .
select single * from t100 where sprsl = messtab-msgspra
and arbgb = messtab-msgid
and msgnr = messtab-msgnr.
if sy-subrc = 0.
mstring = t100-text.
if mstring cs '&1'.
replace '&1' with messtab-msgv1 into mstring.
replace '&2' with messtab-msgv2 into mstring.
replace '&3' with messtab-msgv3 into mstring.
replace '&4' with messtab-msgv4 into mstring.
else.
replace '&' with messtab-msgv1 into mstring.
replace '&' with messtab-msgv2 into mstring.
replace '&' with messtab-msgv3 into mstring.
replace '&' with messtab-msgv4 into mstring.
endif.
condense mstring.
it_messtab-message = mstring(300).
it_messtab-plant = p_werks.
if messtab-msgtyp = 'E'.
it_messtab-status = 'Error'.
else.
it_messtab-status = 'Success'.
endif.
append it_messtab.
clear it_messtab.
endif.
endloop. "messtab
if not it_messtab[] is initial.
perform buildcatalog.
perform display.
endif.
endif.
*& Form Map_Rec
* text
form map_rec.
perform bdc_dynpro using 'SAPMM07M' '0400'.
perform bdc_field using 'BDC_CURSOR'
'RM07M-WVERS3'.
perform bdc_field using 'BDC_OKCODE'
'NPE'.
perform bdc_field using 'MKPF-BLDAT'
v_bldat.
perform bdc_field using 'MKPF-BUDAT'
v_budat.
perform bdc_field using 'RM07M-BWARTWA'
p_bwart.
perform bdc_field using 'RM07M-WERKS'
p_werks.
perform bdc_field using 'RM07M-LGORT'
p_lgort.
perform bdc_field using 'XFULL'
perform bdc_field using 'RM07M-XNAPR'
'X'.
perform bdc_field using 'RM07M-WVERS2'
perform bdc_field using 'RM07M-WVERS3'
'X'.
loop at itab.
count = count + 1.
perform bdc_dynpro using 'SAPMM07M' '0410'.
perform bdc_field using 'BDC_CURSOR'
'MSEG-EXBWR'.
if count <> no_lines.
perform bdc_field using 'BDC_OKCODE'
'=NPE'.
elseif count = no_lines.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
endif.
perform bdc_field using 'MSEG-MATNR'
itab-MATNR.
perform bdc_field using 'MSEG-ERFMG'
itab-ERFMG.
perform bdc_field using 'MSEG-EXBWR'
itab-EXBWR.
endloop. "itab
endform. "Map_Rec
** Form BDC_DYNPRO
form bdc_dynpro using program dynpro.
clear w_bdcdata.
w_bdcdata-program = program.
w_bdcdata-dynpro = dynpro.
w_bdcdata-dynbegin = 'X'.
append w_bdcdata to t_bdcdata.
endform. "bdc_dynpro
** Form BDC_FIELD
form bdc_field using fnam fval.
if fval <> space.
clear w_bdcdata.
w_bdcdata-fnam = fnam.
w_bdcdata-fval = fval.
append w_bdcdata to t_bdcdata.
else.
clear w_bdcdata.
w_bdcdata-fnam = fnam.
w_bdcdata-fval = fval.
append w_bdcdata to t_bdcdata.
endif.
endform. "bdc_field
* FORM buildcatalog *
form buildcatalog.
clear wa_fcat.
clear it_fieldcat.
colcnt = colcnt + 1.
wa_fcat-col_pos = colcnt.
wa_fcat-fieldname = 'PLANT'.
wa_fcat-tabname = it_messtab.
wa_fcat-seltext_l = 'PLANT'.
wa_fcat-key = 'X'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos = colcnt.
wa_fcat-fieldname = 'STATUS'.
wa_fcat-tabname = it_messtab.
wa_fcat-seltext_l = 'STATUS'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos = colcnt.
wa_fcat-fieldname = 'MESSAGE'.
wa_fcat-tabname = it_messtab.
wa_fcat-seltext_l = 'Message'.
wa_fcat-outputlen = '90'.
append wa_fcat to it_fieldcat.
endform. "buildcatalog
* FORM display *
form display.
l_title = text-002.
l_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_grid_title = l_title
it_fieldcat = it_fieldcat
it_events = i_events[]
TABLES
t_outtab = it_messtab
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. "display
Regards,
Amit -
How to insert more t then one web item into single tab in WAD
Hi Gurus , How can i insert one Chart , table and dropdown item into same tab in wad
Please advice
TQ
BRHi,
Currently it is not possible to assign more than one item to a tab. But you can use a container item and place several items in this container item. Afterwards you assign the container to one tab.
Best regards,
Janine -
The drop down list when the History menu option is clicked, has only provided history information for the tab currently being used. (You could go to all history of course and it was cumulative). It is now showing cumulative history for all tabs including for other Firefox windows if I have more than one copy running.
Is there an option to separate the histories for each tab again?
I do not know if this is because of Windows 7. This computer is new as my previous one was stolen and they no longer sell XP versions or Vista versions.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
Windows 7 build 7600 - all updates current.
My e-mail is [email protected]I use that add-on. Works great.
-
Before Firefox 5, the "go back one page" history would show 10 or more prior pages for each tab, so that I could go back quite a way in retracing my browsing steps. With Firefox 5.0.1 and 6, however, the list of prior pages seems to have been capped at 5. I would like to configure Firefox to remember 20 or 25 prior pages for each tab. Is there any way to do that?
(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored. -
Using Firefox 26. How do I get a close button for each tab at the top of the screen?
Some time ago, I had a close tab button for each tab on the top of the screen. I want that back. I have no additional add ons and the close tab is set to 1. Changing it to 2 does nothing.
Do you have installed this extension?
*Firefox/Tools > Add-ons > Extensions
If you do not have the extension and also have no need for the feature that it provides then you can ignore this.
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
You can use one of these to start Firefox in <u>Safe Mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Fbl5n: The printer provides me only one customer items for each page...
Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
ThanksHi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind... -
How to print multiple footers for each page in RTF template xml report.
Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here. -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
Qry:How to get different price for each price list (variable area) in order
1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen -
How to create a PR for each Maintenance Order
Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDDHi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran. -
Spry tabbed panels - Different Hover Class for each tab
Already posted this in the general Dreamweaver section, but just realized there was a specific Spry section. So, my apologies for the repost.
I'm setting up spry tabbed panels, and I'm wanting to use an image for each tab, with the text already on it. I've figured this much out by creating a different class for each in the spry tabbed panel css.
However, I'd also like to have a second hover image for each tab. I'm having trouble figuring out how to set up separate classes for each tab's hover state.
Any help?
Thanks.Just in case you did not notice the announce at the top of this forum's main page, I have copied it here.
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Your question was not asked before
Using the search functionality on forums you can easily find out if your question has been answered before. While you are in search, you can specify the search locations. The Spry forum can be found under:
Adobe Labs > Spry Framework for Ajax
Yoru question can not be found in the existing documentation
Spry provides you with allot of documentation this can found on different locations. In the sidebar of this forum you can find a small summary of resources that will help you on your way.
If these options do not apply to your question, please be so kind to also supply the following information in your topic together with a clear description of your issue:
What browsers does this issue occure:
example: Internet Explorer 8 on Window 7 and Firefox 3.0 on Mac OSX
What version of Spry are using:
example: Spry 1.6.1 ( the version number can be found in license header of the .css and .js files )
What is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step to reproduce the issue:
example: Scroll down till you find the header "help", there you will see a Spry Accordion. When you click on it it will not open or close.
So users can provide you with a better answer, without having to ask you for further details.
by Arnout Kazemier at Oct 23, 2009 2:47 PM
landon_tc wrote:
Actually, I do remember posting that, and have updated it with what worked for me. However, I could not recall posting it in a specific ajax spry forum, so I assumed I just posted in the general forum. Hence the current situation.
Yeah and my name is not Ben Pleysier.
landon_tc wrote:
Any help with the current problem?
Please have a look at this thread http://forums.adobe.com/message/2662019#2662019
I hope this helps.
Ben Pleysier -
Separate line item for each invoice in payment document
Dear Experts,
while making payment for a vendor through F-58 for multiple invoices, the system grouping the invoices on Business Area basis and giving the line items.
For example there are 2 invoices for 5000 and 6000 in one BA and another 2 for 4000 and 9000 in second BA, the system is generating the entry as follows
Vendor A/c Dr BA1 11000
Vendor A/c Dr BA2 13000
Bank A/c Cr 24000
I want the system to generate separate line item for each invoice instead of 2. How do i do it?
But this is not happening when i am making partial payment and in that case it is generating 4 line items.
regards
SureshThanks for the reply
Checked it but still it is working in the same way.
It is a requirement for the client, is there anyway to do it?
Regards
Suresh -
Tab Canvas : 1 data block 2 different query for each tab) Forms 10g
Hello allllll,
I have 2 blocks Master datail ,the master is non-db the tab canvas is for one data block:
Problem 1: How 2 display same data block in each tab.?
Problem 2: How when pressing excute Query button each tab display the data
----------------------specified by the Master block..?
Regards,
Abdetu..-- When-New-Form-instance
IF :SYSTEM.Record_Status ='query' THEN
go_block('PLN_STOCK_TAKING_HEADER');
execute_query;
go_block('PLN_STOCK_TAKING_DETAIL');
execute_query;
go_block('PLN_STOCK_TAKING_DETAIL2');
execute_query;
END IF;
same behaviour,excute on tab2 not tab1,well i think it has something to do with the relation..!
Regards,
Abdetu..
Maybe you are looking for
-
Are there any tcode like MD04 but for a list of material or material group
Hello Experts, Some users want to have a list of dynamic stock (like MD04), but for a list of materials or material group. Are there reports or standard transactions for that? Or must make a specific? Thanks in advance. Said
-
Where are my pictures in Photo Stream?
My Photo Stream that's been pretty reliable until I got a new pc just decided to lose all of my pictures from over the years. New pictures still go there and I can see those, but all my old ones are gone now, why?Where did they go and can I get them
-
Find the sequence name for a particular table
Hi, Please give query to find the sequence name for a particular table in oracle. Thanks
-
There's a source file Disassemble.java, the codes is following, package test; interface IA { public void print(String str); class IAImpl implements IA { public IAImpl() { System.out.println("class A"); public void print(String str) { Sy
-
Problems displaying foreign text
Hi, I have a swing application implementing a virtual keyboard with foreign text. However, when i try to display the foreign text(with keyboard clicks)onto a JTextArea, there are only ??? printing instead. I don't have an input method yet. Is having