Tab context switch and validators problem?

Hi! We use JDeveloper 11.1.2.4.0.
Our application is using Dynamic Tabs UI Shell Template for dynamic tabs. The problem is, when I open a page with validation in one tab (for example: user edit form), and then try to switch context by clicking other open tab (for example: group edit form), it opens the right content (group edit form), but the validation messages for that prevoius tab are popping up (for user edit form). How can I avoid this behaviour? When I switch context, I don't want other validators to execute.
Regards, Marko

In this case check Decompiling ADF Binaries: How to Skip Validation? and Andrejus Baranovskis's Blog: Skip Validation for ADF Required Tabs
Timo

Similar Messages

New tab page rows and columns problem

Hi.
After a recent update and making new tab links smaller, I've decided to increase number of rows and columns, put my most frequently used bookmarks in there and close bookmarks toolbar to improve visibility. Since yesterday (March 26 2014.) I lost my bottom row, although there is enough space on my screen. In about:config newtab section, it still says I'm having 6 columns and 5 rows, but I only get 4 rows when I open new tab. What might be the problem, and why did you make those newtab links smaller anyway?

Hello,
You're using Nightly, which is a highly experimental version of Firefox intended for testing. In the latest version, modifying the ''browser.newtabpage.columns'' and ''browser.newtabpage.rows'' preferences in about:config behaves as you describe (in my case, I actually only get 3 rows, presumably because of higher DPI settings). This issue has already been reported.
* [https://bugzilla.mozilla.org/show_bug.cgi?id=988459 Bug 988459 - New-tab-page is not showing the defined number of tiles anymore]
Please read the Bugzilla etiquette page before deciding to comment on bug reports.
* https://bugzilla.mozilla.org/page.cgi?id=etiquette.html
If you don't want to test a cutting edge version of Firefox and report issues with it, switch to the release version.
* http://www.mozilla.org/firefox/all/

Context menu00FA and hierarchy problem

Gurus...
I have a problem when I make the filter for a page Web,
I execute the page with
/sap/bw/BEx?sap-language=ES&bsplanguage=ES&CMD=LDOC&TEMPLATE_ID=ZADWEB0201,
and there is no problem to me, this page contains query with hierarchy,
but when the filter of the following way,
/sap/bw/BEx?sap-language=ES&bsplanguage=ES&CMD=LDOC&TEMPLATE_ID=ZADWEB0201&FILTER_IOBJNM_2=0COMP_CODE&FILTER_VALUE_2=0061
I cannot see the hierarchy of query and the context menu.
Somebody can say to me if I need parameters for the presentation of the page.
Greetings.

Hi Noe,
why are you working with "_2" after the filters? Try using
sap/bw/BEx?sap-language=ES&bsplanguage=ES&CMD=LDOC&TEMPLATE_ID=ZADWEB0201&FILTER_IOBJNM=0COMP_CODE&FILTER_VALUE=0061.
If you are using more than one data provider maybe you have to set the correct data provider, too:
sap/bw/BEx?sap-language=ES&bsplanguage=ES&CMD=LDOC&TEMPLATE_ID=ZADWEB0201&DATA_PROVIDER=DATAPROVIDER_1&FILTER_IOBJNM=0COMP_CODE&FILTER_VALUE=0061.
(if DATAPROVIDER_1 is your data provider)
Greetings,
Daniel

Switching application shortcut problem (COMMAND+TAB) and (COMMAND+`)

Hello everyone
Since the upgrade Leopard i had a problem with the switching apps shortcut.
Once you start the switching apps forward shortcut (COMMAND + TAB), the switching apps Backward shortcut (COMMAND + `) won't work anymore. The only thing that make it works it to use (COMMAND + SHIFT + TAB) which is not good. It gives me cramp in my left hand! HA!
Anyways I check out petty much everywhere in the settings where I could find a customize shortcut for that. But I didn't find it. I also check if is was not an other application who was taking the same shortcut and it is not the case.
Can somebody help me on that one.
I know it is not a big deal but... still.
Thanks everyone
Benoit

Some applications allow you to set hotkeys (Quicksilver, a 3rd party app, is the example I used -- this is not included with OSX). I was thinking that perhaps some other application you have was using the hotkey cmd-tab and stealing it from the finder.
You can also change the 'meta' keys in the system 'Keyboard and Mouse' prefereneces (click on keyboard -> modifier keys) -- this maybe is confusing things if its not set to defaults.
There's also a 'keyboard shortcuts' tab under keyboard and mouse, look under there e and see if there's anything involving tab (by default there shouldn't be).

When I open a link and instruct to open in a new tab , it switches me to that tab

I have under tools>options>tabs> unchecked "switch to new tab immediately" And it still switches to the new tab. I've searched for solutions and it's not the plug-ins or extensions, which I've disabled manually or started in safe mode.
It had worked briefly for a couple of days (unchecking the switch-to box), then it stopped working. I'm running OS 10.6.7 and I've tried repairing permissions. Any ideas?

You're welcome
Create a new profile as a test to check if your current profile is causing the problems.<br />
See:
* [https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile Basic Troubleshooting: Make a new profile]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why Firefox 5 eating up 1074424KB of my 2027520KB physical memory, with 9 tabs has loaded pages and 6 problem loading page as i stoped them?

Firefox was minimized i was doing something else but while switching to another application the screen got frozen, when it become normal i checked Task Manager and got Firefox is using 10744424KB (almost 53% of physical memory). As stated in question 9 tabs finished loading and another 6tabs showing problem loading page as I stopped them clicking on offline mode and when they stopped loading I switched to online mode.

Yes, Safari Web Content can use a lot of RAM. However, I don't think that would be the cause of crashing; lots of memory use rarely causes crashes. Poorly written software that runs in kernel space (AV software fits this), can cause this.
Safari Web Content is "caching" a lot of stuff. More than I'd like it to. If you have 47 tabs open, and close them down to 1, SWC will still often be taking up a lot of RAM. If you quit and restart Safari it will give the memory back, though in general if the system is under memory pressure I think SWC will also release some more RAM. In general I never notice this to be an issue.
I think with OS X Mavericks things may improve as well, based on details on the Safari tab, as well as with "Compressed Memory" which would help as your system approaches using all its RAM:
http://www.apple.com/osx/preview/advanced-technologies.html

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

Recently I have switched out computers and had copied/ transferred my I ITunes library to the new computer and encountered problem. Many of the songs in the library were purchased from my old email address of that I no longer use nor did I remember the o

Recently I have switched out computers and had copied/ transferred my I ITunes library to the new computer and encountered problem. Many of the songs in the library were purchased from my old email address of that I no longer use nor did I remember the old password in order to authorize playing from the new computer. Request advice/assistance to where I am able to play songs acquired through lost password?

This is a user to user tech support forum. Posting questions and getting responses here is the extent of the support.
If you want phone support, call Apple and pay for it.
Posting your phone number of a public forum is not smart, I have asked the moderators to remove it.

Dynamically-Launched VIs and Context Switching

I'm working on a project that dynamically calls instances of a reentrant VI, which I assume is a pretty common practice. Everything works pretty well, until the number of calls to this dynamic VI gets pretty large--on the order of 1000 or more--at which point, we begin to see performance degradation. My guess is that we are taking hits due to context switching, since the number of threads far exceeds the number of logical processor cores available.
A little more background:
The dynamic VIs being called effectively run as daemons, each running a while loop and waiting on a dedicated input queue to receive data and save it to disk. All are stopped via a globally shared stop notifier (passed as a ControlValue.Set method argument at launch). Each is waiting on its respective queue with a 1 second timeout so that the stop notifier can be polled. Under normal operating conditions, each one will run at some rate between 0.1Hz and 25Hz (the various rates are a large driving factor for separating them and needing to spawn them dynamically).
So, this leads me to the following questions:
Am I correct that the context switching is the likely culprit in the performance degradation?
If so, is there a fundamental difference in how LabVIEW handles multithreading with dynamic VI calls versus explicitly drawing separate while loops on a block diagram, or dropping multiple instances of a reentrant VI directly on the block diagram?
Is it likely that reducing the number of dynamic clones to equal the number of available processor cores would improve performance? (the scope of each clone would grow, as it would have to maintain the state information that was original distributed across multiple clones)
I realize that this question is pretty vague without concrete examples, but I'm hoping someone (AQ? Ben? Any of you NI gurus?) out there could provide some general insight into what's going on under the hood without needing to get too specific.

TurboPhil wrote:
Each is waiting on its respective queue with a 1 second timeout so that the stop notifier can be polled.
There is one relatively easy fix you can probably make here - set the timeout to -1 and destroy the queues to stop the loop (destroying the queue will output an error from the wait primitive). This should at least stop all the code from running all the time, although I'm still not sure how the threading of the different VIs will play with each other. This might be an issue if the queue is only created in the VI, but I'm assuming it isn't.
Try to take over the world!

Catalyst Express 500 Switch and wlan roaming problem.

Hi everybody.
We are using Catalyst Express switches and air-1121G for a wlan network covering a hotel. When we set the smartport-setting on switch to "access-point" users cannot move from one access-point to another. Setting the smartport-role to "other" solves the problem.
Has anybody made the same experience ?

Hi
This is a known issue and the workaround you have used is the best but
this issue has been solved in the new IOS release
i would suggest you to upgrade the IOS for the Catalyst 500 and this should solve the problem
the IOS code is CE500 IOS 12.2.20.SEG
Hope this help
Sayed Abdelrahman

Any setting to use alt+tab for switching adobe and other file ?

any setting to use alt+tab for switching adobe and other file ? instead of opening a adobe file agin and agin?
thanks.
really hate using win8...........................

i mean ..can adobe fild open it in a normal way like win7 did...
so i can use alt+tab to switch task easily..

My iPad 3 will not change the orientation to landscape mode. I have checked the orientation switch and turned it off for a reset neither of which fixes the problem.

My iPad 3 will not change the orientation to landscape mode. I have checked the orientation switch and turned off for a reset. Neither fixes the problem. What can I do?

Is it lock in the Control Center? (tap to enlarge)

Problem with context mapping and data flow in a FPM application

Hi All,
I am trying to develop an ESS application using FPM. For the same, the requirement is to see the history of an employee in the second view.
The first view has got just the overview information and the second one has got the detail. So, the records or the fields are the same on both the views.
As per the FPM guidelines, the Model is residing in the Fc component and the respective Vc components are using the model data accordingly.
I am executing the model in the Fc component calling the executable method in the interfaceController of the first view and then trying to display the output data of the BAPI in the first view which provides the overview information.This is working fine.
But when i am trying to map the same output node to the Table UI for the second view, the record size is coming zero and thus no information is available.
For the above issue, I am again executing the RFC in the InterfaceController of the second view to populate the records, which is incorrect as it is already executed and the data is available for the first view.
I request you to let me know the correct approach to Context mapping and data flow when using FPM-roadmap. Is their any standard method or approach available to deal with such requirements? Please let me know.
Thanks in advance.
Regards
DK

Hi Idhaya,
I model node is available in Fc and the Fc interface controller is being used in the first Vc and the second Vc.
So the idea is, as the executable method is generated in the Fc, so i have created a custom method to call the executable method in Fc, where the input parameter is getting passed and this custom method is finally getting called is the first Vc.
So , now my first Vc is ready to call the custom method in Fc and execute the RFC. Once the RFC is executed, the nodes in the Fc should get populated which is the ideal case.
And as the Fc is used as a component in the second Vc, the same node is available to the UI elements.
But, when I check the record size for the output node, it is always zero, for the second Vc.
Regards
DK

LG Ally text message and gps problems

hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

Please Help! 10.6.8 Update and subsequent problems

On Friday, 2/10/2012, the Software Update popped up and informed me that new updates were ready to be installed on my MacBook Pro.
I clicked the update button and the updater installed the following updates:
iTunes v10.5.3
Security Update 2012-001 v1.1
MacBook Pro Video Update v1.0
Remote Desktop Client Update v3.5.2
Keynote 5.1.1 v5.1.1
Safari v5.1.2
Java for Mac OS X 10.6 Update 6 v6.0
Soon after installation Safari started crashing whenever I opened new tabs. I reset Safari and that problem went away.
I also run a Virtual Machine (Windows Vista imported from a Sony Vaio). The virtual machine has never had a problem and I used it on Thursday before the update and it worked fine. However, after the updates, I can no longer use the virtual machine. It has been corrupted. I get a message that says "Unable to Access Hard Drive 1: input/output error."
Then my whole Mac started running slow, especially Safari. In Safari, pages are slow to load and I get the spinning color wheel (or "beach ball," as I have heard it referred to) when I'm on any web page. Pages take long to load. After they load, I still get the spinning color wheel consistently.
Other programs are somewhat slower to load, as well, and when switching between open programs, there are delays and even more spinning color wheels and beach balls.
My computer has never had a problem until after I installed those updates.
I have repaired permissions and I have also re-donloaded the combo straight from the Apple website, but that did not work.
Is anyone else having this problem? Or has anyone else had this problem? What to do?
Thanks.
And, uhm, no- I did not have Time Machine set up, unfortunately.

Grant, thanks for the reply.
I have NOT been considering a new hard drive. My MacBook Pro is not even two years old, yet (I bought it in May 2010). So, the thought of having to replace my hard drive within 2 years has not even entered my mind and (as I stated) I only started having these problems within the past 2 weeks after having installed the latest updates via Software Update.
Really, if my Hard Drive needs to be replaced after less than 2 years of light use, then I will just chalk this up as a lesson learned and just not buy another Apple product and would probably just buy a Windows-based laptop rather than replace the HD in my MBP.
I am working on transferring my files (the ones that will still open and/or copy) to an external hard drive and doing a clean install of my OS X. I also am trying to figure out if I can somehow manage to save my pics that will not copy to the external hard drive but are saved on my iPad before I do so.
I'm not a computer or Mac genius by any stretch of the imagination, but I do appreciate your reply and advice. Unfortunately, I don't have any idea what it means to re-write a "wvwey block with a known-good pattern." Is that something I have to do manually? You stated that the option is in Disk Utility. Is "write zeroes" an option that you can select or is something you have to input manually? Can you break it down in simple terms for me or give me some step-by-step instructions or a link?
I apologize for my ignorance, but (again) I do appreciate your replay and advice as well as that of HackInt0sh.
Thanks.

Tab context switch and validators problem?

Similar Messages

Maybe you are looking for