Tab control shows wrong display for selected tab

My computer crashed when I tried to post this earlier, so I apologize if the first post actually shows up.
I have seen this for years so it is nothing new, but I don't remember seeing it in any release notes (sorry if I missed it).
Upon loading the .vi (or as an executable), the .vi shows the wrong page for the selected tab. After selecting a different tab, the control works fine. Also, if you create a property node to read the tab value, it matches the displayed page....just the selected tab seems to be incorrect.
A work around is to select the default tab before saving the .vi, but why is this happening in the first place?
Attachments:
tab_example.vi ‏24 KB

Hi Stephen,
The erroneous tab display is something I see on most of not all of my code that uses a tab control (each is a typedef).
What change would I make the the typedef? If I disconnect the tab from the typedef then I will loose the advantages of using the typederf...I will stick with the workaround like I have for the past 3+ years.
Isn't this a LabVIEW bug since the displayed tab is not equal to the value read from the control? I have not tried it on this example I posted but in the past, writing to the control does not fix the displayed tab (writing the control may not work since I wrote the same value that LabVIEW thinks is the current value, but the displayed!=actual).
Thanks,
Todd

Similar Messages

If I have multiple tabs, the history is not for each tab, so if I drop down it shows history from other windows too, possibly eliminating all history for the current window. How do I get each tab separate?

The drop down list when the History menu option is clicked, has only provided history information for the tab currently being used. (You could go to all history of course and it was cumulative). It is now showing cumulative history for all tabs including for other Firefox windows if I have more than one copy running.
Is there an option to separate the histories for each tab again?
I do not know if this is because of Windows 7. This computer is new as my previous one was stolen and they no longer sell XP versions or Vista versions.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
Windows 7 build 7600 - all updates current.
My e-mail is [email protected]

I use that add-on. Works great.

About this mac shows wrong display information

Hi all,
About this mac in my macbook pro shows wrong display information.It shows Built in color LCD display Intel HD Graphics 4000 512 MB graphics..Actually mine is LED display and 1gb Graphics..Pls help me to analyse the problem????OS:Mount Lion

suggest you contact Apple Care on AppleCare: 1-800-275-2273 (If in USA) or book Genius appointment
(Its free) for them to check all the details
http://www.apple.com/support/contact/

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

Printer shows wrong cartidge for my hp allin one

Printer shows wrong cartidge for my hp allin one printer.It was working 4 /5 days ago?if noone can help me is there a toll free number i canc all hp without having to pay for it,I posred this 4 times now and nobody has helped me,,,,,,,,I have windows vista and a DX series gateway computer about 7 nonths old now...Well i cant do anything with my printer now??????????

call 1-800-474-6836.

Need a multi-level control break report displaying a cross-tab for each ...

I need a multi-level control break report that displays a cross-tab report for each
detail and subtotal. The individual cross-tabs are no problem. There are two issues:
1) How to get many cross-tabs (thousands) to appear in one report.
2) How to provide cross-tabs in-line on the multi-level subtotal lines.
Here is a concrete example.
Suppose the data base contains this table:
road (
id_number number, -- this is an artificial PK
city varchar2,
county varchar2,
state varchar2,
length number,
owner varchar2, -- roads may be owned by cities, counties, states, and others
surface_type varchar2 -- the surface type may be gravel, asphalt, concrete, and others
The table is populated with several million records that include every
length of road in a US city.
It is OK to suppose that all the attributes in all the records are not null.
Without the PK, there would be millions of duplicates,
which should all contribute to the summed lengths.
The report I need is like a control break report with a detail line for each
city together with subtotals for each county and state and
a grand total for the US at the end.
However, each detail and total line needs to be a cross-tab report
summing the length over the city, county, state or US
(whichever is called for at that location)
for each combination of owner and surface_type.
so the report would have the following structure:
a city cross-tab for the first city in county 1/state 1
a city cross tab for the last city in county 1/state 1
a cross-tab for count 1
a city cross tab for the first city in county 2/state 1
a city cross tab for the last city in county 2/state 1
a cross tab for state 1
a cross-tab for the US
Any suggestions will be appreciated.
This problem comes up because my client's legacy system,
which is being replaced,
already has such a report (in COBOL).
Thanks!!!
Steve
PS, I know one ugly way to do it. Namely, make a variable for each
possible combination of owner and surface. Then code an ordinary control
break report. However, I am looking for something better.

Hi Jenna_Fire,
According to your description, you have a matrix contains total for each group on each level. Now your requirement is, when you click on any number (data field or total), it will go to the detail report which returns all the detail information of the people
within the group scope. For example, if you click on the total of Active users in United States, it will return the detail information of Active users in New York and Texas. Right?
In this scenario, we should set the parameter (@Country, @State, @City) allow multiple values in both main and detail report. And in Default Value (@Country, @State, @City), query out all distinct values. In the textbox which contains
those total values, when set use these parameters to run the report, we only need to pass the parameters of parent groups. For example, if we click on the total of Active users in New York, we only need to pass Country, State, Status to detail report, and
in the detail report, the City parameter will use all distinct values (Default Values) because we don't pass the City parameter. We have tested this case with sample data in our local environment. Here are steps and screenshots for your reference:
1. Create parameter Country, State, City and Status in both main report and detail report. Set both Available Value and Default Value get values from query (Create a dataset for each parameter, use "select distinct [column] from [table]" as query). Set allow
multiple values for parameter Country, State and City in both reports.
2. In corresponding textbox, pass appropriate parameters in go to report Action.
4. Filter data in detail report (in where clause or using filters).
5. Save and preview. It looks like below:
Reference:
Using Parameters to Connect to Other Reports
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Tab control only allows two page selections

I am having a hard time understanding why my VI only allows two specific tab clicks every time I run it.
Should I be using shift registers with the "initializing" Tab Controls on the left of the VI before it enters the loop?
No matter what I do, it will allow me to change the tab controlled pane two times and then it will not react to anything.
Once I have reached my maximum alloted, two clicks, then the main Cycle abort button will not react either.
Kind of stumped... Any help would be greatly appreciated.
Attachments:
FP1.gif ‏252 KB
BD1.gif ‏201 KB

WOW,
you realize that two of your event structures are running in parallel with the while loop- and they will only execute once? One event- one event execution event. The construct "finishes" done! it won't look for another event.
Take a look at the shipping examples or the P-C QSM (events) template.
Your efforts are not bad, but, show a lack of LabVIEW basics- Dataflow is a different Paradigm- (AND REALLY POWERFUL) but you do need to understand what happens when you use constructs that "break data flow" like locals, globals, and event structures and read the caveats in the LabVIEW help file to get grounded in "best practices"
CAVEAT:
I've probably "broken" most of the "best practices" guidelines- Intentionally! but I wanted specific things from LabVIEW that I knew would happen without race conditions. 99.995% of my code does not violate the "best practice" rules. I write a lot of LabVIEW- It gives me room in that 0.005% to do "interesting" things.
Jeff

Tab control - takes long to change between tabs

Hi everyone,
I am using a tab control to display a set of results on each tab. So, I have a tab control with three tabs and each tab consists of 16 indicators which are updated with values. Now, when I run the program, it is taking a long time to switch between these tabs. For instance, if I am currently on Page 1 and then I click Page 2, it takes around 5 seconds to change the tab. I know this should be like this but I cannot understand what is happening.
I need help, please. I know it is a silly question but I cannot make heads or tails of it!
Thanks!
Solved!
Go to Solution.

I would also recommend to streamline the code a little bit.
For example the cases in frame#1 differ only by some small operations. All that belongs inside the case is the code that differs. none of the local variable seems to be necessary. All that belongs in the smaller cases are the colorbox constants (might be easier to index into an array of colors). If you autoindex on the For loop boundary, you don't need to wire N and you can eliminate the "index array" operation.
In frame #2, you could autoindex on arrays of references, all in a single FOR loop (same for all the initializations).
You have race conditions. Initializing all the colors (to the right and left of the sequence structure) all occur in parallel to the sequence structure. You should create a data dependency to ensure things occur in a defined order.
You can probably eliminate all these hidden indicators and associated local variables. The wire is the data!
LabVIEW Champion . Do more with less code and in less time .

Tab Control will not build properly if "tab location" are on left or right.

Using LV 6.1, try the following;
Create a new vi. Place a Tab control,(from the Arrays & Clusters palette), on it's front panel. Right click on one of it's tabs and follow "Advance-->Tab Location-->select Left". Save your vi. Create a build for it and run the program. Does anyone know of a fix for this? Does this also happen on LV 7.1?
Thanks

That is good news to me. That probably means I am doing something different here.
What happens to me is that when I create an executable of a VI which uses a Tab Control that has had its tabs set on the left or right of the control instead of its original location, the tabs are now all stacked on top of each other at the very bottom and the text labels are not shown.
I don't know how else to explain this. I've attached a sample of a vi I used to test this. Please take a look at it.
Thank you,
Wil
Attachments:
Untitled.vi ‏9 KB

Can you print all the tab control's contents and include the tabs?

We are trying to generate a report that includes the contents of a tab control (graphs, text). Using the Append Control Image to Report.vi, we are only able to print out the active tab and the tab is cut off of the image. How can we generate reports that include all the tab pages and their contents and include the labeling tabs?
Thanks in advance.
Jim

I do have a workaround for makinging the prints but it looks like some sort of cropped screensave that cuts off the tabs. In my sample I was printing out 3 of the tab controls and you can see there are three by the cut off tabs. Is there a setting to allow for more of the graph and its surroundings to be "captured"?
Attachments:
Document.pdf ‏53 KB
Document (2).pdf ‏51 KB
Document (3) (2).pdf ‏58 KB

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Honeycomb some time navigating in tabs does not work. if i select tab a from tab b, the header changes but not the page. It does if i move out of app and return

using samsung p6200.
If i open multiple tabs (say more than 14) so say ifi am on 14 tab and back to 12th then it will switch properly but if i go back to first tab it wont show the webpage. some tabs will show and some wont. sometime the tab will show a type of progressive image of tab which wont get more clear. But tab switches if i move out of application and return. example i am not tab 14 say gizmodo.com and i return to tab 2 say wikipedia then it wont change the page. if i go to task manager and return back to firefox then it will show the page.

I agree that it cant be as smooth but this issue is replicable in much less tabs as well.. around 4. Also i dont see any reason not to open 14 tabs as when i run Ubuntu on sam tablet parallel to Android, i can open tabs in firefox in Ubuntu. I understand the architecture difference of green bot and ubuntu for which i hate android. i wanted to hilight that firefox is working fine but somewhere it is unable to fetch data from its cache, while when OS reloads the app from background to foreground, the cache is retrieved.

Is there an about:config option to change FF's default action when closing a tab so that it displays the previous tab rather than the next tab?

With the new 3.6 tabbing behaviour (new tabs open to the right of the current tab, rather than at the end of the tab list), the old default behaviour when a tab is closed is no longer appropriate. Instead of displaying the next tab after the one that was closed, FF should display the previous one. Is there an about:config option to change the default behaviour upon closing a tab?

Try one of these:
*Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122
*Tab Control: https://addons.mozilla.org/firefox/addon/1480

Spry tabbed panels - Different Hover Class for each tab

Already posted this in the general Dreamweaver section, but just realized there was a specific Spry section. So, my apologies for the repost.
I'm setting up spry tabbed panels, and I'm wanting to use an image for each tab, with the text already on it. I've figured this much out by creating a different class for each in the spry tabbed panel css.
However, I'd also like to have a second hover image for each tab. I'm having trouble figuring out how to set up separate classes for each tab's hover state.
Any help?
Thanks.

Just in case you did not notice the announce at the top of this forum's main page, I have copied it here.
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Your question was not asked before
Using the search functionality on forums you can easily find out if your question has been answered before. While you are in search, you can specify the search locations. The Spry forum can be found under:
Adobe Labs > Spry Framework for Ajax
Yoru question can not be found in the existing documentation
Spry provides you with allot of documentation this can found on different locations. In the sidebar of this forum you can find a small summary of resources that will help you on your way.
If these options do not apply to your question, please be so kind to also supply the following information in your topic together with a clear description of your issue:
What browsers does this issue occure:
example: Internet Explorer 8 on Window 7 and Firefox 3.0 on Mac OSX
What version of Spry are using:
example: Spry 1.6.1 ( the version number can be found in license header of the .css and .js files )
What is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step to reproduce the issue:
example: Scroll down till you find the header "help", there you will see a Spry Accordion. When you click on it it will not open or close.
So users can provide you with a better answer, without having to ask you for further details.
by Arnout Kazemier at Oct 23, 2009 2:47 PM
landon_tc wrote:
Actually, I do remember posting that, and have updated it with what worked for me. However, I could not recall posting it in a specific ajax spry forum, so I assumed I just posted in the general forum. Hence the current situation.
Yeah and my name is not Ben Pleysier.
landon_tc wrote:
Any help with the current problem?
Please have a look at this thread http://forums.adobe.com/message/2662019#2662019
I hope this helps.
Ben Pleysier

Keep getting this prompt when I close a tab: ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589) Stack Trace: 0:([object XULElement],[object XULElement],0) How do I get rid of it?

ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589)
Stack Trace:
0:([object XULElement],[object XULElement],0)
Happening since I went to the 4.0b9 beta. Thanks for any help in getting rid of it.

They're still working on fixing that Bug - https://bugzilla.mozilla.org/show_bug.cgi?id=608589 - a fix for another Bug - https://bugzilla.mozilla.org/show_bug.cgi?id=613888 - landed earlier this week which might have fixed it. Unless you are willing to install a nightly Trunk which has the latest fixes, you'll have to wait for 4.0b10 for the fix.

Tab control shows wrong display for selected tab

Similar Messages

Maybe you are looking for