Tab&Fetching Data message
Technologies Used : Jdeveloper 11.1.1.0.1 + ADF BC
Problem Description
- Home page contain panel spiller , First facet contain link to dynamic Region in the Second facet
- dynamic Region has backing bean scope
- every dynamic Regions consists of PanelTabbed
- first tab of PanelTabbed contain table
When running :
- first region work correctly , i can navigate between tabs , and make transactions
- if you try to load Second region , second dynamic region appear with PanelTabbed ,
but message "Fetching Data" appear
How i can fix it ?
thanx
Wael
Edited by: Wael22 on Mar 16, 2009 5:21 AM
Hi,
sorry, but your post does not contain any hint that could be used to provide help. You describe the usecase pretty well, but apart from this there is nothing that could point to the problem. If there is no stack trace or similar then my best suggestion is to contact support and have them looking at the testcase
Frank
Similar Messages
-
Induce the "fetching data" message during QBE
hi there,
my table view of the data does not provide any indication that it is working during QBE processing.
is there a way to induce an hourglass or the "fetching data" message during QBE processing?
thanks again.Hi David,
It turned out that Oracle Support considers this 'standard behaviour' of the ADF interface.
The only workaround is to disable it by setting ORACLE_ADF_UI to False in planning properties. This works only when navigating through workspace - not on 8300 - so you can have a bit of both worlds.
Regards,
Alin -
Change "Fetching data" message in Table
Hi,
I want to display a GIF instead of showing 'Fetching data..' in table while retriving the data. Is is possible to do it in skinning?
Thnaks,
$N
Edited by: Saravanakumar Nanjappan on 5-Aug-2011 7:56 AMthe value will come from AdfDhtmlLookAndFeel._TRANSLATIONS and the key is af_table.LABEL_FETCHING
you can change in your custom css i think -
Unable to fetch data from R/3
hi
i have a few questions regarding data extraction from R/3 into BI 7.0. I am giving the steps that i followed for the same.
1. Created 2 char infoobjects vbeln,posnr. 1 keyfigure 0Gross_wt (unit 0UNIT_OF_WT)
2. In R/3 went into RSA5 activated SAP-R/3(SAP Application components) >> SD >> Activated 2LIS_11_VAITM (Sales Document Item Data)
3. In RSA6 double-clicked 2LIS_11_VAITM - all fields i.e POSNR, POSNR and BRGEW are present. these are the fields that I am mapping in the proposal.
4. In BI, RSA1 >> source systems >> SAP (RFC to R/3) >> SAP Application components >> Sales and Distribution >> replicate metadata >> got 2LIS_11_VAITM in the list (but under sales Master Data, There is no App. Comp. for item data).
5. Checked fields in the datasource.
6. Created infopackage >> in schedule >> Start data fetch >> Got mesage : Data was requested.
7. In Infoprovider >> created an Infocube >> added the chareacteristics and keyfigures to it.
8. created Transformation >> mapped the fields >> activated >> created DTP with : Extraction mode = Full >> Update >> error handling = request green >> activate.
9. Execute tabe >> executed.
10.Monitor message >> No more data available >> 0 records updated.
a. What am i doing wrong? data is available in R/3 tables VBAk and VBAP.
I tried the same steps for uploading Customer as Master data under the infoarea and was able to get the records in BI.
b. How do i create Transfer rules and Update rules while fetching data. Could you give me the steps.
c. Are the steps the same if i try using an ODS object instead of an Infocube?
Please help
Thanx
SujaiGoto SBIW tcode in the source system.
And follow the path.
Business Information Warehouse -> Settings for Application-Specific DataSources -> Logistics -> Managing Extract Structures -> Initialization -> Filling in the Setup Table -> Application-Specific Setup of Statistical Data
Select your component.
Also before filling you need to delete them.
You can do it in tcode LBWG.
Regards. -
Filters on non-conforming dimensions when fetching data from multiple facts
Hi,
I would like to confirm my understanding about how OBI fetches data from multiple facts. I have set up the BMM layer. Through Answers I am getting data from multiple facts as expected. However, is it necessary to base filters only on the conforming dimensions? If I do so, I am getting the correct data. But if I filter data on non-conforming dimensions, then I am getting more data which I am not expecting.
Suppose, Fact1, Fact2 and Fact3 share a CommonDim dimension. If I have a filter on CommonDim, then the filter is used on the three fact tables. However, if I filter data based on Fact1's DimTwo which is not shared by Fact2 and Fact3 and I have measurements from all the fact tables, then from the SQL generated, it seems that OBI is fecting all data from Fact2 and Fact3 and data from Fact1 where DimTwo = 'SomeValue'. Then it seems to be merging the data from the three result sets.
Is this expected, esp. a scenario where a filter is based on a non-conforming dimension (DimTwo in the example)? Have I missed anything? What do I need to do, if I want to return rows from Fact1 based on DimTwo's filter and then if there is data on Fact2 and Fact3 based on the value in CommonDim corresponding to DimTwo's filter?
Please let me know.
Thanks and regards,
Manoj.
PS.: I have got a link now which is http://obibb.wordpress.com/2010/06/06/multiple-fact-reporting-on-non-conforming-dimensions-part-ii/
Edited by: mandix on 25-Oct-2011 12:01Hi
The problem you describe is similar to mine (I wrote several threads ago).
That is, if there is a non-conformed dimension in a report then the column from the fact table which is not connected with those non-conformed dimensions containes zeros or blanks.
Was this problem solved? I didn't quite catch one of previuos messages... If you can please repeat it more detailed.
What I tried to do is to set Total level in the Content tab (LTS properties). In this example - I could set Total level to JOBS in the plan type dimension. But it didn't help.
So if you know what to do then please describe it here... -
I wish to change the standard "Fetching data..." text displayed by ADF when scrolling through a table.
Looking at the description in http://jdevadf.oracle.com/adf-richclient-demo/docs/skin-selectors.html, I expect to achieve this by overriding "af_table.LABEL_FETCHING" in my skinning resource bundle.
I am able to override two af_column messages, but my af_table override does NOT work.
My bundle looks like this;
package com.vesterli.demo.skinning;
import java.util.ListResourceBundle;
public class MySkinBundle extends ListResourceBundle {
@Override
public Object[][] getContents() {
return _CONTENTS;
private static final Object[][] _CONTENTS =
{ { "af_table.LABEL_FETCHING", "Hang loose, dude" },
{ "af_column.TIP_SORT_ASCENDING", "First things first" },
{ "af_column.TIP_SORT_DESCENDING", "The last shall be the first" } };
My trinidad-skins.xml looks like this:
<?xml version="1.0" encoding="windows-1252" ?>
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>vesterli.desktop</id>
<family>vesterli</family>
<render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
<extends>fusion.desktop</extends>
<style-sheet-name>css/MySkin.css</style-sheet-name>
<bundle-name>com.vesterli.demo.skinning.MySkinBundle</bundle-name>
</skin>
</skins>
Since I am seeing my customized column tip texts correctly, the reference from trinidad-config.xml to my skin should be OK (I am also seeing my visual skinning correctly). Since I am seeing some of my texts, my resource bundle must be valid, too. I am using JDev 11.1.1.3.
So why doesn't the af_table skinning work?
Any pointers appreciated.
Best regards
Sten VesterliI was having this problem too, found this thread and did cleanup here and there, redo etc. But ended up with no luck to fix it.
Just now discovered the issue is reproducible on the official demo site: table Skinning Key Demo
1. check the column sorting labels, prefixed with "Demo: "
2. change any selector setting to trigger a table refresh, it's always displayed as "Fetching Data...", without prefix.(as highlighted in the "Resource styles" on the same page, there should be prefix too). -
Doubt in Fetching data from a View
Hi all,
I want a data from a view v_tvko.How to use a view in program for fetching data from that.
Please help.
Thanks in advance.
Nithin.Hi Nitin,
We can't directly refer a view to get data.
We need to refer the tables using which a view has been created.
Using those tables, we can fetch the data as per our requirement.
For suppose, if you go to a view in SE11, then click on Tables tab, there you can get the reference tables.Then you need to check for the fileld in those tables for which you require the data.
Post the query directly on the table instead of view.
Hope this will help you.
Regards,
Anand. -
Failed to fetch data provider data. (LO 26306)
Hi,
We have created a webi report, which is having a date prompts.
The same webi report, we have used in xelsius using a live office connection.
In Xelsius, We have checked the box 'refresh on load', under usage tab.
When we run the xelsius dashboard, we are getting an "Failed to fetch data provider data. (LO 26306)".
Can anyone please help. why this error is getting. Is it because of prompts which are there in webi report.
Basically, our requirement is when the user runs the dashboard, prompts should be displayed. User will enter the prompts and based on that, dash board should get display.
Regards
Ramesh GanjiSee SAP Note 1440129.
Symptom
Change the Live Office documentation to clearly state that before importing a Live Office document within Xcelsius the Live Office document has to be opened in Excel and the 'Refresh All objects' triggered. If this step is not done and the Excel file is saved without prior refresh the error 'Failed to fetch data provider data (LO 26306) in Xcelsius is raised (when previewing the model)
Environment
Live Office 3.1
Xcelsius 2008
Cause
The information is not stated in the official documentation.
Resolution
The issue has been identified and logged under Problem Report ID ADAPT01374107
Keywords
01374107, ADAPT, ADAPT01374107, LO, 26306, LO 26306, LiveOffice -
Error while fetching data into collection type.
Hi all,
I'm facing a problem while i'm fetching data into a table type.
Open c1;
open c2;
loop
Fetch c1 into partition_name_1;
fetch c2 into partition_name_2;
exit when c1%notfound or c2%notfound;
open C1_refcursor for 'select a.col1,b.col2 from table1 partition('||partition_name_1||') a, table2 partition('||partition_name_2) b
where a.col2=b.col2';
loop
fetch c1_refcursor BULK COLLECT into v1,v2 <-----This is the line where i'm getting the error as "ORA-01858: a non-numeric character was found where a numeric was expected"
limit 100000;
exit when v1.count=0;
forall i in 1..v1.count
end loop;
i also checked the data type of the table variable its same as the column selected in the refcursor.
Please help me out.
Message was edited by:
Sumit NarayanOk I see that, but I don't think you can use associative arrays in this manner then, because you cannot select data directly into an associative_array.
As far as I'm aware, they must be assigned an index and the error suggests to me that its missing an index.
You can select directly into records and maybe this is where you need to go. -
BAM reports taking more time while fetching data from EDS
I have created an external Data Source(EDS) in the BAM, and when i create an object with that EDS, it is taking very long to fetch data from the EDS( more than 20 mins.), but as the Database is installed on my local system, when i fire a query there, it don't take much time. Please help me in this, what could be the possible reason?
Your messaging gateway question would be better addressed in the SQL PL/SQL forum
All Places > Database > Oracle Database + Options > SQL and PL/SQL > Discussions -
Select query is taking lot of time to fetch data.....
Select query is taking lot of time to fetch data.
SELECT algnum atanum abdatu abzeit abname abenum bmatnr bmaktx bqdatu bqzeit bvlenr bnlenr bvltyp bvlber b~vlpla
bnltyp bnlber bnlpla bvsola b~vorga INTO TABLE it_final FROM ltak AS a
INNER JOIN ltap AS b ON btanum EQ atanum AND algnum EQ blgnum
WHERE a~lgnum = p_whno
AND a~tanum IN s_tono
AND a~bdatu IN s_tocd
AND a~bzeit IN s_bzeit
AND a~bname IN s_uname
AND a~betyp = 'P'
AND b~matnr IN s_mno
AND b~vorga <> 'ST'.
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Mar 27, 2011 12:05 PMHi Shiva,
I am using two more select queries with the same manner ....
here are the other two select query :
***************1************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelpt LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelptrprctr
WHERE rldnr = c_telstra_projects
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
and rzzlstar in r_lstar
AND rpmax = c_max_period.
and the second one is
*************************2************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelnt LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelntrprctr
WHERE rldnr = c_telstra_networks
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
and rzzlstar in r_lstar
AND rpmax = c_max_period.
for both the above table program is taking very less time .... although both the table used in above queries have similar amount of data. And i can not remove the APPENDING CORRESPONDING. because i have to append the data after fetching from the tables. if i will not use it will delete all the data fetched earlier.
Thanks on advanced......
Sourabh -
Fatal error while fetching data from bi
hi,
i am getting following error while fetching data from bi using select statement
i have written code in this way
SELECT [Measures].[D2GFTNHIOMI7KWV99SD7GPLTU] ON COLUMNS, NON EMPTY { [DEM_STATE].MEMBERS} ON ROWS FROM DEM_CUBE/TEST_F_8
error description when i click on test
Fatal Error
com.lighthammer.webservice.SoapException: The XML for Analysis provider encountered an errorthanks for answering .but when i tried writing the statement in transaction 'MDXTEST' and clicked on check i am getting following error
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
SO I WENT IN SM 59 TO CHECK THE CONNECTION.
CAN U TELL ME WHAT CONFIGERATION I NEED TO DO FOR MAKING SELECT STATEMENTS WORK? -
Facing prolem in Dashboard 4.1, while fetching data from Bex Query
Hi Exports,
I am facing an error message " Failed to (de-)serialise data. (Xsl 000004)" while fetching data in Dashboard from Bex Query.
The query is getting connect. while drag n drop some dimensions and measures then going for Refesh or Run Query, geting this error.
The same query is working fine with other comp like webi n crystal.
Anybody having solution for this please let me know. I am stuck somewhere.
Thank YouHi,
Check the data in the infoProvider.Reduce the Bex query Characteristics & Key figure fields.Try to identify due to which characteristsic adding in Bex Query ,are you facing the issue.Check that characteristic data in the infoProvider.
Regards,
Venkat -
Sessions opening\closing in oracle while fetching data from XI
Hi Friends,
I used JDBC adaptor to fetch data from Oracle. I set the poll interval 86400 seconds because we need to run it on daily basis.
Now when XI fetch data from Oracle, It will open session in oracle, but it is not closed automatically. So, I have nearly 100 channels, and all channels are activated. So, for each channel 1 session is opened in oracle. By this way, the oracle server performance goes down. It is not working properly at that time.
How can I close these sessions in oracle.
Regards,
NarendraDid u try this paramter in JDBC sender adapter...
Disconnect from Database After Processing Each Message
Set this indicator if the database connection is to be released and reestablished before every poll interval.
-Siva Maranani -
How to fetch data in report related to fb03 , bkpf, bset table ?
how to fetch data in report related to fbo3, table bkpf, bset etc.
if any body is having any report related to these tables then please share.Moderator message - Welcome to SCN.
But please ask a specific questio - thread locked.
Also, Please read Please read "The Forum Rules of Engagement" before posting! HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob
Maybe you are looking for
-
Is there any std BAPI or FM to get Vendor Line Items? Is there any database Table which shows all Vendor line items (open and cleared)? Note : table BSIK shows only open line items. Thanks in advance. Points will be rewarded.
-
We have a mac book and my husband used the Iphone 3g. he has bought a new iphone 3gs and also syns with the same mac book. I have taken over the old iphone 3g and tried to syn to the same itune however my own contacts have been over written by my hus
-
Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation
Hi Fellows, I am facing an issue with Exchange 2013 SP1 (5.0.847.32) environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/group
-
IPhoto erased from MacBook Pro. Please help!!
I installled iPhoto again usuing the applications disk that came in the box but every time I open iPhoto it closes unexpectedly. Can someone please tell me how I can get iPhoto completely installed again? Thank you!
-
I am new to ODI and now trying to plan the future ODI infrastructure. I am considering "Single Master" architecture described by Cezar Santos. Since my environment already includes OBIEE, I am planning to use OBIEE Repository DB to host all ODI repos