Tabcontrol without tabs?

I have a form with a splitcontainer control and i want to use left side to have navigation buttons and rightside with the main data shown. So i was wondering is there a way to remove tabs from the tabcontrol. Or how should i go about achieve switching
pages in winforms?

If you wish to use TabControl then you can simply set the itemsize to 0,1 after setting sizemode to fixed as shown here:
http://dotnetrix.co.uk/tabcontrol.htm#tip5
You can also inherit TabControl and create your own with a HideTabs property as shown here:
http://dotnetrix.co.uk/tabcontrol.htm#tip14
Or you can create a completely custom control which acts like TabControl but without Tabs as shown here:
http://dotnetrix.co.uk/custom.htm#tip2
...of course you could also just add panels to your form and just hide and show them as the result of button clicks.
Mick Doherty
http://dotnetrix.co.uk
http://glassui.codeplex.com

Similar Messages

How do I get the tab bar at the bottom of the screen (right above the task bar) WITHOUT Tab Mix Plus?

''locking - please stick with your original thread about this problem - https://support.mozilla.org/en-US/questions/934590''
I like having the tab bar at the bottom of the screen; I use the task bar AT THE BOTTOM to switch between programs, so I want the the tab bar AT THE BOTTOM to switch between web pages. The only way I've found to get the tab bar at the bottom of the screen is the extension Tab Mix Plus. I used it for a long time, and it worked great.
Unfortunately, when I recently updated to Firefox 14.0.1, I encountered an error: I could no longer middle-click on a link to open it in a new tab (which I do ALL the time). After some troubleshooting, I found that it was being caused by some incompatibility between Firefox 14.0.1 and Tab Mix Plus; upon removing Tab Mix Plus, my middle-clicking was back to normal.
But without Tab Mix Plus, I'm back to having the tab bar at the top of the screen. I've searched and searched, and I can't find anything besides Tab Mix Plus that will let me put the tab bar at the bottom of the screen. I've found tons of stuff about the option "tabs on top", but that has to do with putting the tab bar above/below the navigation bar--it's still at the top of the SCREEN either way.
What can I do?

Reset the pref <b>layout.scrollbar.side</b> to '0' or set to '2' to place the scroll bar at the default right side.
See:
* http://kb.mozillazine.org/layout.scrollbar.side
* http://kb.mozillazine.org/about%3Aconfig
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Firefox asks (twice) to save and close tabs, on new open windows without tabs, when i close them.

About one month ago, i started to receive a message box from firefox, asking if i wanted to save and close tabs, on newly open windows (and pop-ups) without any tabs open on them.
And everytime i close the windows without tabs, firefox asks it twice...
I did not made any changes, so i don't know why it started doing this.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Photoshop-When opening image without tab view, image opens with only a portion in view

I having an issue with CC.
When electing in the preferences to not open image in Tabs. The images open with only about 25% of the image area showing. Forcing me to (command) 0 for full to screen preview or (command) +/- to see the image.
I am not talking about seeing the image at 100% resolution just the entire image within the floating window without having to command before view.
Sidenote: Adobe Customer Service is all based in India. I spent 4 hours on the phone only to hear that this is that way photoshop works.
There would be no logical explanation for this. Since the first version of Photoshop this has not been the case.
I think this should be called view porn with wife in the room mode. Other than that I see no point.
Can anyone help?
Lv
Chadwick Tyler

Moving discussion to Photoshop forum.

[SOLVED] Xmonad - Use subLayout without tabs

Hi there,
I have a defined layout using subLayouts :
codeLayout = spacing 6 $ windowNavigation $ subTabbed $ boringWindows $ ResizableTall 1 (2/100) (1/2) [] ||| noBorders Full
According to the documentation, subTabbed is a use of subLayout with addTabs to show decorations.
I'm trying to have same behavior but without the tabs but i just fail every time i use subLayout directly (wrong syntax ?).
Is it possible to use subLayout directly ? Or maybe avoid the addTabs decorator ?
Thank you !
Last edited by Johnyjohn (2012-09-25 17:22:29)

I spent too many hours on this before finding how to use subLayout.
The documentation constructor and example lost me as i don't know/understand haskell :
subLayout :: [Int] -> subl a -> l a -> ModifiedLayout (Sublayout subl) l a
myLayout = addTabs shrinkText defaultTheme $ subLayout [0,1,2] (Simplest ||| Tall 1 0.2 0.5 ||| Circle) $ Tall 1 0.2 0.5 ||| Full
What i want is done by removing modified and sub layouts items :
codeLayout = spacing 6 $ windowNavigation $ boringWindows $ subLayout [0, 1] (Full) $ ResizableTall 1 (2/100) (1/2) []
It's know a resizable tiled spaced layout with the possibility to group windows in a sub full layout (like a stack ?).
Hope it can be usefull.
Thank you for everything i found in this forum.
Last edited by Johnyjohn (2012-09-26 06:29:35)

JTable - loosing focus without tabbing out

Hi all,
I have a JTable and when the user goes to enter some text in a field I would like the value entered to persist to the underlying object as soon as the text is changed. This is without the user tabbing out of the JTable.
Currently when a value is changed and the user hits a save button the value is not saved as the focus is still in the table, it all works fine as soon as the user enters the new value and tabs out of the table and then selects save,
Does anyone have any suggestions?
THanks,

This can be done via your own TableCellEditor class. Create a TableCellEditor class. Implement KeyListener in this editor to save whenever the data is modified.
You can set the default editor via setDefaultEditor() on JTable.

Confirming information in JTable without TAB?

Hi all,
I am using a JTable in my application, but I discovered you have to press 'TAB' or click on another row of the JTable to confirm all the data of the JTable.. Is there a way to solve this problem, so that all data are available without doing an extra event?
I hope somebody can help me. Thanks!
Tongue.

I reckon you've got an editable table. Add this line:
yourJtable.putClientProperty("terminateEditOnFocusLost" , Boolean.TRUE);

Excel file in CRM "WITHOUT TAB LIMITED CONVERSION"

Hi experts,
tHIS QUESION HAS BEEN ASKED SO MANY TIMES BUT I COULDNT FIND A SINGLE ANSWER WHICH EXPLAINS UPLOADING WITHOUT CONVERTING THE EXCEL FILE IN TAB LIMITED.
Can somebody please tell me how to upload an excel file in crm without converting the excel file into tab limited.
the FM "TEXT_CONVERT_XLS_TO_SAP",
"ALSM_EXCEL_TO_INTERNAL_TABLE"
"ALSM_EXCEL_TO_INTERNAL_TABLE"
ARE NOT ABAILABLE IN CRM 5.0.
I can use GUI_UPLOAD but i need to convert the excel file to tab limited which i dont want to. So, somebody can please help me out FINDING AN ALTERNATE FUNCTION MODULE.

Hello,
The FM TEXT_CONVERT_XLS_TO_SAP use class like I_OI_DOCUMENT_PROXY and I_OI_SPREADSHEET which are avalaible in CRM5.O.
You can maybe check program SAPRDEMO_TABLES_IN_EXCEL and use it to write your own logic.
Regards,
Frederic

Best way to manage login page without Tabs in Tabbedapplication

HI fellow developers!
I'm encountering a problem while building my first Tablet application.
I'm using Flex that communicates with PHP, that's no problem at all. I've created a testapp to test my services and everything works fine.
Now, i've started to develop the real application. I'm using a tabbed application, but i want to use authentication in my mobile app.
For the authenticationpage i don't want to see those tabs so i'm looking for the best way to do this.
At first I thought to add a login viewnavigator aswell and hide the tabbar but i can't get my tab 'login' away.
Probably this isn't the right way to do this.
So, is there someone that can help me with this? I really don't know how to go further.
with regards

Hi
Thanks for your answer, but that isn't really a solution.
I tried that myself, but the problem then is that the other views stil have the 'login' tab.
I didn't really find a way to hide that one.

FF29.0 crashes when loading with tab groups, loads fine without tab groups. WHY?

I have about 16-18 tab groups (at least I did in FF28.0). When updating to FF29.0, FF crashed EVERY time when trying to load. I finally did a fresh reinstall of FF29.0. After reinstalling my 18 add-ons, I ran Session Manager and loaded a session from before I had updated to 29.0. It had all my tab groups! WOW, it loaded. Well, it loaded ONCE. It never loaded again. Crashes every time. I have saved sessionstore.bak and sessonstore.js at various times. I copied one from before the crashes and FF29.0 works just fine. It just won't work with all/any of my tab groups. Crashes every time while loading. If it won't work with my saved tab groups, I will be forced to go back to FF28.0. That would not be progress.

Hi,
Some of your reports are not complete which means something is causing the reports to not be uploaded fully. Please follow the steps to ensure your crash reports can be uploaded and your crashes stop.
#Stop your antivirus and scanners temporarily
#Disable hardware acceleration. See [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#w_turn-off-hardware-acceleration Turn off HA]
If that doesn't work then create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Adding tabs to View based application in mobile project

Hi,
I wanted to if tabs can be added to a view based (ViewNavigatorApplication) ? I need tabs few of my views also tabs will be different in different views.
If using TabbedNavigatorApplication is the only option how do I create a first view without tabs and different tabs in different section of the application.

on what page of the app (P-Track, right?)... I assume you desire to see them listed in the project details, page 200? If so, the source for the query for that region has a where clause hard-coded for m.milestone_status='Open' ... removing it would get what you want there (they will still be color coded). I've modified this application extensively such that I have an actual control on the region(s) to allow the user to choose "open/all" (for milestones and actions)
Otherwise, you can adjust the search filter 'status' option on page 35 to 'all' (the default is 'open') and click go.. (and/or add a new list option in that control for 'closed'..)
does that help?

Adding a new tab to CrystalReportViewer and loading a new rpt into it

Hi,
I've been struggling with the following problem for a few days now and I would really appreciate any help you can offer.
I need to add a new tab to an existing instance of CrystalReportViewer and load a new crystal report (RPT) into it.
I wasn't able to do that and tried inserting an instance of a new CrystalReportViewer into the new tabpage, but I've encountered several problems with that solution as well, such as: by hiding the tree and all bars, I'm also removing the page navigation field of the new rpt.
Here is the code I've used:
TabControl tabControl = (TabControl)((PageView)crystalReportViewer1.Controls[0]).Controls[0];
DocumentControl tab2 = new DocumentControl(new ViewerDocument(new SubreportContext()));
tabControl .Controls.Add(tab2);
tabControl .TabPages[1].Text = "New Tab";
tabControl .SelectedTab = tab.TabPages[1];
Now I need to load the rpt to the new tabpage
If I'm trying to add a new CrystalReportViewer into the tabpage:
ReportDocument oRpt2 = new ReportDocument();
oRpt2.Load(tempFile);
CrystalReportViewer newViewer = new CrystalReportViewer();
newViewer.Dock = DockStyle.Fill;
newViewer.DisplayGroupTree = false;
newViewer.DisplayStatusBar = false;
newViewer.EnableDrillDown = false;
newViewer.DisplayStatusBar = false;
newViewer.DisplayToolbar = false;
newViewer.ReportSource = oRpt2;
tab2.Controls.Add(newViewer);
Please let me know what is the best practice for this kind of operation.

Continue my question....
I've found a method that opens such a tab for me in one statement:
DocumentControl tab2 = ((PageView)crystalReportViewer1.Controls[0]).CreateNewReportDocument("new doc");
But I remain with question of how to load the new RPT into it?

Portal forms connecting to each other in tabbed page

Well, here's a challenge...for me anyway.
If the forms are created and they are published as portlets and in the tabbed page, is there a way to get
the user to fill out 1 form and be passed automatically to the next?
I haven't done this before, but am aware of the parameter concept a tad. The page the forms go to can accept parameters and the forms have a common field on each of them > but what is the next step?
-does this code work better as javascript or pl/sql?
-where exactly does the parameter passing event occur/get written?
hope these basic questions are easy for someone....
thanks in advance.
mary

Hello,
I have just seen your question. I have a very similar question myself (without tabs), but I have no reply yet. In case you have a solution, could you kindly email me ([email protected]). Thank you, Trivan Pal

Full Screen Mode with Window Tabs? (Mac)

I have never been able to use Full Screen Mode / Full Screen Mode with Menu Bar because my Window Tabs disappear.
Until now I have ignored this but I really want to start making the most of my screen space. I don't understand how people can go into full screen mode without tabs of their open documents. It makes the experience completely useless to me and I can't believe I can't find any solutions online. I feel like I am overlooking a simple button somewhere on the screen thinking "surely Adobe would include this!?"
Please help.
I am currently on 13 inch MacBook Pro using CS6 beta.

RichardOverton wrote:
Thanks for the reply, but I already know of this 'workaround', and it isn't a solution for me. There is no functionality in cycling through windows with no idea when you will arrive at the correct PSD. I usually have quite a few open at the same time and I am constantly skipping between them nice and simply with the tabs...Please Adobe just add an option for tabs, all the other components of the layout are optional in full screen, why not tabs?
Putting in a feature request for tabs in full screen mode is a good idea. One thing Photoshop could do in full screen mode is reveal the menu bar and tabs when the mouse is near the top of the screen. This is sort of an ad-hoc standard in tabbed apps like Chrome and Firefox. Even Adobe Photoshop Lightroom reveals the menu bar in this way, but Photoshop continues to use the same full screen behavior that it had back in the 1990s, when it was one of the few full-screen apps available.
One workaround is to turn off Window > Application Frame, and when you're in full screen mode use Lion's Mission Control to pick a specific window. This works even better if you use or assign a shortcut to view the windows of a single application.
c.pfaffenbichler wrote:
how does everyone else cope?
As a career-long Mac-user I am not accustomed to tabs and therefore don’t need or use them.
Tabs have been in Mac apps, such as Apple Safari and Final Cut Pro, for many years.

In OSX Safari, how do I drag a single open window to an existing tab set?

In OSX Safari, how do I drag a single open window, without tabs, to an existing window with a tab set?
I have an iMac 5K running Yosemite.

Thanks, but I have multiple open tab sets and want to move a solo window to one of the windows with multiple tabs. It seems there must be a way to grab that solo and move it in with the tabs. My workaround is to add a tab to the solo window to create a tab that I can grab, but isn't there a "handle" for a solo window that is "grabbable"?

Tabcontrol without tabs?

Similar Messages

Maybe you are looking for