How do I add a library?

This may be a simple question, but I have downloaded a
third-party library and I'd like to know how to add it to my flex
app. so that I can use? I assume there's two parts, copying the
files to the right location and including it somehow in the app.
itself. How might I do that? Thank you! - Joshua

The files can be wherever you want. I am assuming it's an swc
file, correct?
Open Flex builder and under Project > Properties > Flex
Build Path, Click on the Library Path Tab, then just click "Add
SWC" and find your file! If you move the file, you will have to
update this again.
Also, SWCs are compiled into the project, so when/if you
upload the project you will not need the swc file on the server.

Similar Messages

How can I add a library of flash movies to my site?

I posted this same question on the Dreamweaver forum and a suggestion was made that I try over here for help, so please excuse the duplicate question.
How can I add a library of flash movies to my site?
Hey there everyone and thanks for reading my question.
I have a library of flash movies (specifically a library of maps) and when the map movies are run in Flash they call each other just fine (i.e. the USA map will load the Georgia map when Georgia is clicked on the USA map, etc etc etc for each state).
HOWEVER, when I insert the USA map in one of my site pages (I'm working on the site using Dreamweaver CS4) the USA map page will load, but when a state is clicked the area on the page for the map goes blank and the state map does not load.
Short of coding a specific path in each of my state maps (in the Flash editor) is there a way to tell Dreamweaver there is a library of maps, look there for the sub-map?
and if I do have to code the path to the map, can I code a relative path rather than a specific URL address for the maps?
I know this is probably one of those simple things, but I'm not seeing it (can you tell I'm new at this??)
Thanks in advance for any help!
Frances

Hey again,
Thanks for the helpful suggestions. Everyone's comments got me to thinking about what the path was in the calls from the maps.
here is what finally worked:
on (release)
loadMovie("../FlashIMapDownloads/georgia.swf", 0);
this script code is in the action script for the "georgia" button of my main map - a US Map. (I hope I'm describing all this correctly).
I'll post this same info in the Dreamweaver forum too.
Thanks again!
Frances

How do I "Add to Library" when iPhoto won't recognise selected photos?

A few months ago I was unable to import photos from the same Canon camera I've always used with iPhoto. Despite a number of steps taken, the problem has not resolved.
As I was getting a few erratic problems I decided to rebuild the computer (back up, wipe hard disk, re-install all software,etc.). I then imported the photos from the camera as usual. Last night they imported properly. Tonight those new photos are do not appear in the Library window of iPhoto. Those new photos are, however, in the iPhoto folder. When I try File/Add to Library, I get the message "Unreadable Files: 1 The following files could not be imported (they may be an unrecognised file type or the files may not contain valid data). The message then gives the path to the library "Users/Shared/iPhoto Library/2005".
Extra information:
*iPhoto Library in a shared folder so that my partner can access them from her Account;
*there are 2500 photos in my library;
*the photos are in .jpg format;
*I've always used the same camera - Canon IXUS v3;
*they imported OK yesterday but have disappeared today;
*I get the same result whether I try to Add to Library one photo or multiple folders of photos.
*I've read a few threads on these discussion pages but the answers don't seem applicable - if only because of the inconsistency (ie importing OK yesterday and being problematic today)
I'd be grateful for anyone's help!
iMac & iBook G4 Mac OS X (10.4.3)

I think I understand now. I am thinking you placed these files in the iPhoto Library folder yourself. You need to drag them to the desktop and import them from there, by either dragging them into an open iPhoto viewing window or using the command File>add to library within iPhoto.
Some more info for you:
--First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
If you have already put files/folders in the iPhoto Library folder in the Finder then you will also find out that if you try to import them into iPhoto you will get an error message. No worry, just drag them to the desktop and import from there.
--All images that you import are shown in the library view. You can choose how you want to view, by rolls, by date, by rating, etc. When you put images in an Album, slideshow, book, etc, you are actually just putting pointers to those images in the library. You are not adding more images. If you delete an image from the Album it will still be in the library. If you delete an image from the library it is deleted from iPhoto's database and your hard drive (unless you have it backed up somewhere else)
--You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder.
-- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
You want all your photos in iPhoto so you import them into iPhoto.
Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
-- You download pictures from your camera into iPhoto.
There is now one copy of each of the pictures. (DO NOT HAVE IPHOTO DELETE THE IMAGES FROM YOUR CAMERA! DELETE THEM MANUALLY WITH THE CAMERA-if something goes wrong with the import and they are never imported and then they are deleted from the camera you might end up losing those images)
You want to change something about a picture you imported, such as
cropping it or changing the size, or changing the orientation.
Once you do that to a picture, you now have two copies of the picture
in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
(a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
3.You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
You can open up prefs for iPhoto and choose "when double clicking on
photo ..do" choose "other" and select Photoshop. Now you can edit all
pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
Or, with iPhoto open, you can drag a picture from the library window
to your desktop (you see a + sign on the pic you are dragging). You now
have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
picture out of the folder to your desktop. Notice that you will see a plus sign while dragging the photo. This is copying the file to your desktop
I would advise anyone not to do this as they might forget to use the option key and drag the photo out. Next time you open iPhoto the photo will be missing.
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
About the iPhoto Library folder
Don't forget that in Library view you can Control click on any picture and get a contextual menu with many options. One is to revert to original.

How can I "add to library" other people's music

I recently had some random person pop up in my itunes menu. I tried to select some songs and "add to library" some of his music, but it didn't do anything. Also, how do share random people's libraries like that? Thanks

You can't. Copying from another person's computer would in most cases be a copyright violation (and definitely when it's someone you don't know) , so it's not possible in iTunes.
As to why you're seeing those libraries, you're seeing the shared iTunes library from some other computer on your local network. If you don't want to see them any more, go into the iTunes Sharing preference and turn off "look for shared music". If you don't want to similarly be sharing your iTunes library with other computers, make sure that the "Share My Music" option is unchecked.

How can I add a library asset to a specific master spread?

Hello! I am new to the forums and rather new to javascript as it relates to indesign so I apologize if this is rudimentary.
I am building a script that automates new document creation for our company and have run into a problem with placing library assets.
I want to add a library asset to a specific master page by name, but I cannot find a way to do this.
I can get assets to place into my document with this:
            var t = app.libraries.item(0);
            var libTapeStrip= t.assets.itemByName('Tape Strip');
            var myTapeStrip = libTapeStrip.placeAsset(myDocument);
However, the asset is being placed on a master spread that I had previously added to the document. It seems to be the active or front most spread because when the script is complete and I create a new window that spread is what is displayed with the asset on it.
I would like to place the asset on another master spread, but placeAsset() only accepts documents and text boxes. I have also looked on a way to bring the master spread I want to the front, but cannot find this either.
If anyone can lead me in the right direction I would appreciate it!!
Thanks,
Ben

@Benjamin – You could make the spread (or the page) where you want to place that asset the "activeSpread" or "activePage", place the asset and then go back to the old active one.
Something like this:
(Here I assume that you want to place your asset on a master spread named "A-Master" and the asset is the first in the one and only library file that is open.)
var myDocument = app.documents[0];
var myMaster = app.documents[0].masterSpreads.itemByName("A-Master");
var myLibrary = app.libraries[0];
var myAsset = myLibrary.assets[0];
var myOLDActiveSpread = myDocument.windows[0].activeSpread;
myDocument.windows[0].activeSpread = myMaster;
myAsset.placeAsset(myDocument);
myDocument.windows[0].activeSpread = myOLDActiveSpread;
Uwe
Message was edited by: Laubender
Message was edited by: Laubender [Nothing edited in the code.]

How can i add a library path for a .dll library?

hi
i used a native method (sndPlaySound) in a dll file (winmm.dll).
then i complided my source successfuly , but in runtime i recieve
this Exception :
Exception in thread "main" java.lang.UnsatisfiedLinkError: no winmm.dll in java.
library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at JNItest.<clinit>(JNItest.java:9)
i know i must add the library path to the java.library.path but
i don't find "java.library.path" and don't know what i must to do.
i am in windows 98 and don't use any IDE (just jdk 1.3.1).
thank you very much.

Windows uses the current PATH enviroment variable to search for dlls.
Windows searches for dlls in the Current directory , the application directory (if the current is not the same) , the PATH variable, then the system directories (Windows, Windows/system)
It's different in every OS, but if you only care about windows...
Also try searching on msdn.microsoft.com, they might have more information there.

How do i add a library in windows 7 for itunes

Last year when i download itunes i didnt need to inlcude a folder in the library and other things but this time when i downloaded itunes due to a new laptop it and an itune thing said " You may choose an existing itunes library or create a new one."
and i dunno what to do
Plz help me >.<

Hi,
Thank you for your answer. It took some time to respond, since I do not have too much time experimenting.
Although I did not understand how to make a certain user account a member of Backup Operators, I managed to disable UAC. Firstly, I created an new admin account and then logged in with this account and used two lines of reg commands from the command line
as I found them on a website when I searched for ´how to disable UAC in windows 7').
Then I opened RegeditX. I selected a register branch, went to ´Permissions' and added the new admin account and gave this account full permissions (= elevation of privileges). Next thing was to make the (for me) necessary changes to the register.
Now, almost all changes that I wanted to make (replacements: 'c:\progr' into 'd:\prog') could be made. Previously I already copied the user folder to the D-drive from Linux. Some could not be changed (mostly keys regarding Internet Explorer or with a DLL
reference, maybe because these keys are in use or extra protected somehow, or something else?). Further I made another register change re the user path.
When I restarted I could select a user, but then windows just provided me with a temporary profile.This was true for all accounts.
So I deleted all users to make new user accounts (I made backups several times). The problem stayed the same. Then I saw some extra accounts (like public, default, etc) in the backup and moved them back to the D:\users folder.
That helped a lot. One weird thing is that every time I log into an account I got a textfile ´Desktop.ini' opened automatically. I would be nice if this can be prevented somehow...
I hope this is enough to let windows think that the user dirs are on d-drive and that I do not run into trouble...
Thanks anyone for helping already!

How can i add a library on an ipa file ?

the solution from www.mocana.com allows for maximum user flexibility and native experience, while not risking corporate intellectual property.
* Increase productivity by fully supporting bring your own device (BYOD)
* Embrace Bring Your Own Device (BYOD) without additional IT burden or privacy issues
* Use best-in-class, military-grade security methods by a company known for its security legacy
* Highest level of security protecting corporate data
* No programmatic effort to secure the apps - MAP is automated and can take prior written apps and secure them in under 5 seconds
can someone tell me how this works?

it works ... but i don't know how ... example :
the solution from www.mocana.com allows for maximum user flexibility and native experience, while not risking corporate intellectual property.
* Increase productivity by fully supporting bring your own device (BYOD)
* Embrace Bring Your Own Device (BYOD) without additional IT burden or privacy issues
* Use best-in-class, military-grade security methods by a company known for its security legacy
* Highest level of security protecting corporate data
* No programmatic effort to secure the apps - MAP is automated and can take prior written apps and secure them in under 5 seconds
i hope someone can tell me how....

I have an old itunes library on usb, how do i add this to my new itunes on mac?

I'm not technically minded, but have managed to put my old itunes library (from my old pc) onto a usb. How do I add this library to my current itunes on my Mac?

An iTunes "library" is a collection of media and support files all working together. The .xml file is simply a listing of what tracks you have in your library and where they are located. You add a .xml file by using the import command in iTunes (I use an older version so I can't tell you exactly where but it should not be hard to find if you look at the various menu category listings).
Note, if you add just the .xml it will be pointing to files in specific locations. If that listing is not valid because iTunes cannot find the drive with the files then you will end up with a ton of broken links.
It might help at this stage to take a step back and tell us exactly what you have on this drive and what you are trying to accomplish. Sometimes people come here with questions the equivalent to, "How do I use a hammer?" for us only to discover they are trying to get a screw into a wall.

How to add a library dynamically in xcode

Hi friends,
How do I add a library in xcode project?
Thanks

Hello,
You might get better help in the Developer Forums...
https://discussions.apple.com/community/developer_forums?view=overview
Good luck!

How to add a library (libSomeRandomlib.so) to a project....??

Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly.
Suppose I create a new Xcode C++ command line tool project. I hit Build and go, and it gives me a nice little Hello World! in the console, just as it should. If I then click on the project in Groups & Files, go to Project>Add to Project..., and choose, say, libCint.so, from my root/lib directory, and click ok, then click Build & Go, I get an error in the console:
dyld: Library not loaded: @rpath/libCint.so
Referenced from: /Users/paulthompson/Documents/Programming/Build Products/Debug/LibraryIncludeTest
Reason: image not found
sharedlibrary apply-load-rules all
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.)
My assumption is that either I'm missing a step in the process of adding a library, or else there is something jacked up with the libraries themselves. Anyone have any advice?
Thanks,
Paul
EDIT* Oh, I should mention that the actuall binary that gets built after adding the library WILL execute properly in the Finder, or from terminal, just not with the Build & Go, or Go commands from within xcode.
Message was edited by: TraxusIV

TraxusIV wrote:
Results of otool:
LibraryIncludeTest:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 123.0.0)
Macintosh-9:Debug paulthompson$ otool -L /Applications/CERNRoot/root/lib/libCint.so
/Applications/CERNRoot/root/lib/libCint.so:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
I honestly don't know much about @rpath. I found this page that explains it a bit more: http://blogs.sun.com/dipol/entry/dynamiclibraries_rpath_andmac
So, since I don't want to deploy with the environment variable set, I should ask, what IS the correct, MacOS X way to do it?
The best way to find that is to look at how Apple does it. They put frameworks in /System/Library/Frameworks and regular shared libraries in the standard places. You can do the same. Put your frameworks into /Library/Frameworks and your shared libraries into /usr/local-based paths.
If you want to create stand-alone executables that can be installed via drag-n-drop, you can put shared libraries inside the application bundle. If your shared libraries/frameworks are elsewhere, you will need some sort of installer to get them installed.
I've been sifting through Apple's developer documentation but I have yet to find a concise, straightforward explanation of how to add shared libraries. I'm horribly confused at this point. Is there a good tutorial available anywhere for both the general unix case of linking to dylibs and .so's, and the Mac specific case?
Hopefully someone else knows an answer for this one.
*EDIT* I do already have the variable defined both in ~/.MacOS/environment.plist and also in Xcode as an additional user variable.
I'm not sure about the whole RPATH thing. Setting environment.plist will define environment variables for use in the Finder, but that is really a hack. There are better ways to do it, but if you are porting some open-source programs, that may be the only way. You should be able to define those variables in Xcode. You have to selected the debug executable under "Exectuables"

I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

How can i add my itunes library to my iphone?

how can I add my itunes library to my iphone. when i sync no music is added?

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How do I add photos to iCloud Photo Library?

Hi All,
Hoping for some help as I'm at a loss.
So iPad and iPhone, both upgraded to ios 8 last week and thought I would take advantage of the new iCloud Photo Library. Works great, I take a photo on my phone and it automatically catalogs it and appears on my iPad via the iCloud Photo Library.
Now here's the issue, how do I add photos to my library from my computer?
If I plug either device in and load up iTunes, select my device and click on the Photos tab, I am told the following:
iCloud Photos is On
**********'s iPhone can access photos in iCloud. Photos can be downloaded to your device via Wi-Fi or mobile network.
I rang Apple Support who kindly told me that I had to disable iCloud Photo Library on my device so that I could then sync it with iTunes, then re-enable it again so it would merge the two. This all worked up until re-enabling iCloud Photo Library which prompted me to delete all the photos I'd just synced.
So now I'm at a loss, how do I get photos on to my iPad now that I have this nice new feature enabled? All I want to do is make sure all my photos are in the iCloud library.
Thanks

bump

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the with the little arrow, not all the highlighted ones!

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

How do I add a library?

Similar Messages

Maybe you are looking for