Table Browser does not 'fetch' any tables back from Database.

Post Author: StevenL
CA Forum: Semantic Layer and Data Connectivity
When I click on 'table browser', after waiting overnight (not me, physically..), the list of modules are shown but with no tables in. If I click on a module's contents it says 'Fetching tables' for a split secind before returning nothing. If I do a refresh the modules list goes blank. I have been able to do this until very recently, my Connection, user Account (Supervisor-Designer), BO version (6.5.1, ORACLE Database 10g) etc have all not changed. The problem we have is because there is more than 20 000 tables to return when 'table browser' is clicked and this takes overnight. Other users here with same resp. can all come in next morning to a full list to choose from - except me. We're all confused. Can anyone offer suggestions to what this could be?u201D A trace file setup via sqlnet.ora revealed nothing.
Has anybody got any suggestions here or methods of finding out more information?
Many thanks in Advance..
StevenL

Post Author: StevenL
CA Forum: Semantic Layer and Data Connectivity
Well well. The good old remove and re-install has worked! Can't understand it. After simply getting the product re-installed, I opened up Designer, imported 2 differing Universes that used the LIVE Finance Database that was causing me the problems, clicked on table browser, waited approximately 60 seconds, hit escape, all tables were visible, I dragged and dropped no problem. I didnt need to reconfigure and create new BO Database Connections, replace the BoMain Key, in fact, anything. Totally mystery yet it works so Im happy!" Many thanks for all who read, helped or assisted.
Steven

Similar Messages

Service entry Sheet does not pick any Condition charges From Service PO

Hi All
Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

HI,
Please check Sap note 381030
Along with other thing It says
"Delivery costs are generally not supported in external services management and in case
of blanket purchase orders, item category D or B. Instead of representing delivery
costs via conditions, in case of service documents, freight costs and other, SAP
recommends to add in additional service lines."
So that is the reason you are not getting those account entry in the time of service entry sheet
Use another service line with text ( or service master) for the additional costs as suggested by SAP
Hope it clarifies

I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate inform them but not received any feed back from their side, please advise and protect my Ipad.

Dear Sir,
I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate informed them but not received any feed back from their side, please advise and protect my Ipad.
LOCATION : SAUDI ARABIA. DAMMAM - I have travelled from KOZHIKODE TO DAMMAM.
I HAVE KEPT MY IPAD SEAT POCKET#42H, ,
I have tay it several time thru ICloud still it's in offline.
Saudi air lines customer support services not responding properly,
You are requested to protect my IPAD and advice for the next.
* Can I get back up files from that IPad.,
waiting for your prompt reply as soon as possible,
best regards,
ZAMEER MAIDANI
<Personal Information Edited By Host>

This is a user-to-user technical support forum. We can't do anything to "protect" your iPad. If your files are backed up (and only you would know if so and where) you should be able to access them from your back up.
Did you have Find My iPad enabled?

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Running of process flow does not show any Active session in Database

Hi Team,
I am running a process flow in OWB 11g ( From Design Center ) which is having around 100 maps within it. However, from Control Center I can see the Process Flow is running ( i.e. Green check is visible beside the process flow) but when I run SQL query in backend database ; I am unable to see any running object ( i.e. OWB map name as package object) there corresponding to this Process Flow
I am running the below query to check the availability of running session :-
SELECT A.LOGON_TIME,A.SID,B.OBJECT_NAME,A.*
FROM gv$session A, dba_objects B
WHERE A.PLSQL_ENTRY_OBJECT_ID = B.OBJECT_ID
AND A.STATUS = 'ACTIVE'
Could you please suggest if this is something wrong in the development of the Process Flow or we can`t see any running map there in backend when we execute any process flow from OWB ?
Thanks in advance
Nilava Sen

Try below query
select sid,module,program,status,sql_id from gv$session where status='ACTIVE';
select * from gv$access;

Does not fetch records

The following trigger first fetch the record from paymaster. It will put the paymst_list cursor in loop, if transaction exists in the transaction(tran_list) file for the given period (form variable month) it will update the transaction file by calculating salary (variable sal),Conveyance (variable conv) etc based on number of days absent ( i.e. proportionate ). If transaction does not exists in transaction file it will take the basic from paymaster and calculate the rest.
Where as the following trigger does not work properly, it inserts the record correctly but, but will not update. I think the cursor tran_list does not fetch any record. Can any one help me Please.
DECLARE
CURSOR paymast_list IS SELECT empcode,empname,basic FROM paymast;
CURSOR tran_list(emp_id varchar2) IS
SELECT month,absent from tran where empcode = emp_id and month = :month;
tmp_empcode paymast.empcode%type;
tmp_basic paymast.basic%type;
tmp_name paymast.empname%type;
tmp_month tran.month%type;
tmp_absent tran.absent%type;
cal_sal number(12);
cal_pf number(12);
cal_conv number(12);
cal_proftax number(12);
cal_present number(4);
BEGIN
OPEN paymast_list;
LOOP
FETCH paymast_list INTO tmp_empcode,tmp_name,tmp_basic;
OPEN tran_list(tmp_empcode);
FETCH tran_list INTO tmp_month,tmp_absent;
IF tran_list%NOTFOUND THEN
cal_sal := ((tmp_basic/:total_days)*(:total_days - tmp_absent));
cal_pf := tmp_basic * 10 / 100;
cal_conv := 800;
cal_proftax := 200;
:proce_desc := tmp_name;
INSERT INTO tran (empcode,month,sal,conv,pf,pt) VALUES
(tmp_empcode,:month, cal_sal,cal_conv,cal_pf,cal_proftax);
IF tran_list%FOUND THEN
---ELSE
cal_present := :total_days - tmp_absent;
cal_sal := tmp_basic/:total_days * cal_present;
cal_pf := tmp_basic * 10 / 100;
cal_conv := 800;
cal_proftax := 200;
UPDATE tran SET sal = cal_sal,conv = cal_conv,pf = cal_pf
WHERE empcode = tmp_empcode and month = :month ;
END IF;
END IF;
CLOSE tran_list;
EXIT WHEN paymast_list%NOTFOUND;
END LOOP;
COMMIT;
CLOSE paymast_list;
END;
null

hi,
you are checking the tran_list%FOUND within the tran_list%NOTFOUND checking. You have commented the ELSE part. You should comment before tran_list%FOUND and one ENDIF. You should try once.

/Library/Receipts does not contain *any* Apple app receipts?

Has Snow Leopard changed the way Apple Installers and Software Update handles receipts? Used to be if you installed an app like iLife (or any other app), there'd be one or more .pkg files in /Library/Receipts.
I've got a fresh install of Snow Leopard that does not show any .pkg receipts from any Apple-installed software, including iLife, iWork or Logic Studio. And I just updated the OS to 10.6.1 via Software Update along with iTunes 9, and still not a single .pkg file in Receipts. There's over 20 of them in there from Microsoft Office, though...
Has Apple changed the receipts procedure under Snow Leopard, or do I have a problem here?
Can anyone with a fresh, clean install (not an update or a migrate) of Snow Leopard take a look in their /Library/Receipts folder and tell me if there's anything in there from an Apple install? Any Apple install...?
Clean Snow Leopard installs only, please; update installs might have old receipts left over from 10.5 installs and old Software Updates.
Thanks.

baltwo wrote:
Those are blown away, starting with Leopard, vers 10.5.6, IIRC. They're initially downloaded into Updates, used, and then deleted. If you want to save them, don't install until you make copies. The pkgs that previously resided in Receipts were just markers and weren't the full installers. Alternatively, manually download and run them.
Interesting, and thanks.
Get this: the new Software Update has done away with the menu option that allowed "Download Only". I guess they're trying to limit the distribution of their installers.

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

Trying to access row values in a table which does not have any rows yet

try{
                         MappedRecord importParams = recordFactory.createMappedRecord("CONTAINER_OF_IMPORT_PARAMS");
                         IFunction function1 = client.getFunctionsMetaData().getFunction(funModGetDet);
                         IStructureFactory strucFact = interaction.retrieveStructureFactory();
                         response.write("try2 :"+pnumber);
                        IRecord structure = (IRecord) strucFact.getStructure(function1.getParameter("PERNR_TAB").getStructure());
                         response.write("try111 :"+pnumber);
                         structure.setString("PERNR",pnumber);
I am getting the following error "Trying to access row values in a table which does not have any rows yet " where PERNR_TAB is a table containing field "PERNR".
Can anybody help me out?

Please re-post this question in the appropriate forum. It seems to have nothing to do with Web Dynpro.

The query does not reference any table when attempting to build the WHERE clause. (IES 00022)

Hi
I am getting below error.
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
This error is in Validating Measue object in IDT.
It is not throwing error for dimensions objects but only for measure objects.
My BO version is 4.1
Backend is Teradata 14.1.
Regards
Gaurav.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

Dump showing that table does not contain any elements.

Hi All,
I have a table, with lead select.Based on the row selected, corresponding values of the row are filled in the input fields.
I filter the table and only those rows are displayed which has status "waiting". Now the problem is when there is only one row with status "waiting", and process it, its status changes to "done", as a result of which there is no row in the table, and i get following error:
Adapter error in INPUT_FIELD "IF_STATUS" of view "ZPWB.DISTRIBUTE_VIEW": Context binding for property VALUE cannot be resolved: The DISTRIBUTE_VIEW.1.PD_ITEMS_TAB node does not contain any elements
Can you please help out:)

I have now the same problem.
somebody found out what the solution is for that issue?
if i have an empty context i get a dump due to the context binding. what is the work around?

Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

Table Browser does not 'fetch' any tables back from Database.

Similar Messages

Maybe you are looking for