TABLE + BUTTON : NO LEADSELECTION + No Select column

I just have a button on each line for DETAILS
I'd like to identify the row on which the button was pressed so that I can read an internal table to get the corresponding record!
so far i'm there...
DATA:
            L_INDEX TYPE I.
DATA:
    NODE_OBJECT_LIST                    TYPE REF TO IF_WD_CONTEXT_NODE,
    ELEM_OBJECT_LIST                    TYPE REF TO IF_WD_CONTEXT_ELEMENT,
    LWT_SELECTION               TYPE WD_THIS->ELEMENT_SELECTION.
* navigate from <CONTEXT> to <OBJECT_LIST> via lead selection
ELEM_OBJECT_LIST = wdevent->get_context_element('CONTEXT_ELEMENT').

Stephan,
Suppose you have a NODE called DETAILS in your view VIEW. In the button action, add the following code to get the index of the selected element:
DATA: node_details TYPE REF TO if_wd_context_node,
        elem_details TYPE REF TO if_wd_context_element,
        lv_index     TYPE i.
node_details = wd_context->get_child_node( name = 'DETAILS' ).
IF ( node_details IS INITIAL ).
    EXIT.
ENDIF.
elem_details = node_details->get_element( ).
IF ( elem_details IS INITIAL ).
    EXIT.
ENDIF.
lv_index = elem_details->get_index( ).
Regards,
Andre

Similar Messages

Insert into a table excluding duplicates of a selected column

I have mytable:
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916
that is a result of INSERT i.e.,
INSERT INTO myTABLE(Item,[Date],[Level])
values('X24','12/23/13 :22','22916')
I want the INSERT to exclude the duplicate level defined as the previous level in a selected column [Level]. This would avoid having to 'view' the table using:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable
i
INNER
JOIN
mytable
d
ON
d.IDNO
=
i.IDNO-1
WHERE
i.[Level]
<>
d.[Level]
IDNO is an identity column.
How can this INSERT be achieved without the overheads?

Quite helpful comments particularly the ISO- 11179 and the design elements that can prevent the problem in the first instance. My apologies with regards to my impolite post omitting the DDL. It is a small procedure and [Date] and [Level] can be accommodated
by the server but are bad habits. My efforts to control the data input were in vain as the data was not from a software conducive to such controls. Because of the high frequency volume of the data, (suggested by the time-stamps with milliseconds cut), any
effort to have 'The data... cleaned in a presentation/input layer ' would be futile. The suggestions of yourself
and Erland Sommarskog, SQL Server MVP, [email protected], of a UNIQUE constraint to deal with the problem
underscores the importance of design even in the 'smallest' of procedures.
This worked:
drop table Foobar
CREATE TABLE Foobar
(item_name CHAR(5) NOT NULL,
foo_timestamp DATETIME2(0) NOT NULL
CHECK (foo_timestamp
= DATEADD(MINUTE, DATEDIFF(MINUTE, '2000-01-01', foo_timestamp),
'2000-01-01')),
water_level INTEGER NOT NULL, -- why not be silly?
PRIMARY KEY (item_name,foo_timestamp, water_level));
INSERT INTO Foobar
VALUES
('X24', '2013-12-23 10:41:00', 22996),
-- ('X24', '2013-12-23 10:41:00', 22996), rejected by DDL!!
-- ('X24', '2013-12-23 09:21:00', 23256), rejected by DDL!!
('X24', '2013-12-23 09:21:00', 23256),
('X24', '2013-12-23 09:22:00', 23256),
-- ('X24', '2013-12-23 09:22:00', 23256), rejected by DDL!!
('X24', '2013-12-23 09:22:00', 22916);
select *
from Foobar
item_name foo_timestamp
water_level
X24 2013-12-23 09:21:00
23256
X24 2013-12-23 09:22:00
22916
X24 2013-12-23 09:22:00
23256
X24 2013-12-23 10:41:00
22996

How to implement 'Quick Select' column in a query result table?

Hi,
I have a requirement in OAF to design a search page with 'Quick select' column.
One of the column in the query result table should be a quick select.
Once user clicks on the quick select column, we have to navigate back to the previous page with the row value selected.
Can anyone help me in this.
Thanks.

Also refer the search exercise in the toolbox tutorials.
you can implement the quick search in the same way as update and delete buttons.
--Prasanna

Hiding select column in LOV results table

Is there a way to hide the select column easily in an LOV popup window? Right now I have a two column results area and it appears the LOV object dynamically adds a column of radio buttons in a column labeled SELECT and another column labeled QUICK SELECT. I wish to hid the SELECT column of radio buttons. It is not there when I look at the personalize link.
So right now the only two columns I have in my LOV mappings are Pay Period and Check Number. The results table renders as:
Select | Quick Select | Pay Period | Check Number |
I want it to not show the SELECT column. Any ideas?
Kris
Edited by: Kristofer Cruz on Feb 26, 2013 12:30 PM

Kris,
Did you try changing the render property of the table region of the LOV ?
Regards
Sridhar

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How to select columns in a table by their column id and not the column name

Hello,
How do you select columns from a table based on their column_id.
I have create a view
but other than Select * , i cant now select one just one column from it
the view as follow:
create view count_student as
select a.acode "acode",aname "Activity Name",count(ae.acode) "Number of student joined"
from aenrol ae, activity a
where a.acode= ae.acode
group by a.acode,aname;

The issue is that you have decided to use quoted column names. A pretty horrible idea (mostly for the reasons that you are now finding).
Re-create the view and get rid of the silly double quotes.

How to add the values of all selected columns in a table and display it ?

Hi all,
I am using jdeveloper 11.1.1.6.0
Page:
my page jsff page contains one ADF table and one textbox
DB:
i have two database tables A & B ,
i need 2 columns from each table . say (A.product_no ,A.product_name,B.prodeuct_price ,B.confirm)
here product_no is primary key and present in both tables.
i need to create a VO combining these two tables and put it as ADF table in a jspx page
Functionality :
my 'confirm' field is a checkbox field in table . whenever the checkbox is selected,
the corresponding price will be getting added and display it in a textbox.
Eg:
if my first 4 price values are 3000 , 2000 ,4000,2000
and if i select first 3 values , then the text box should contain 9000 value.
i need help ...
Problem:
i need help in creating VO and functionality part

Hi,
it is easy: create an entity object for every table and one view object where you select your both entity objects and join them in your select statement.
Your desired 'confirm' functionality could be achieved with helpp of view object transient attributes - for more information see: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/bcquerying.htm#CHDHJHBI
Regards
Pavol

How to export selected columns in a table using expdp of oracle10g

Hi all..
I have a table with 10 columns and i want to export only 4 columns(selected columns) data using expdp
Pl. tell me if we can do this and if yes what is the syntax.
Thanks..
Sekhar

That's not possible, you could use QUERY to specify where clause but not columns in select clause,
for example,
QUERY=employees:'"WHERE department_id > 10 AND salary > 10000"'
you could use
create table2export as select c1,c2,c3,c4 from tableof10columns;and export the temp table.

How to freeze the selection column in the table control of the module pool.

hi ,
in my module pool there is a row selection field <b>w/selcolumn</b> of the table control called as mark.
how to freeze the selection column where there is no record in the table control row.
or in other words where wa is initial.
thanks
ekta

Hi all,
in the PBO of the screen the following code is written.
say the selection column is MARK and is declared in the data as well.
thanks
ekta
*************************C O D E **************************************************
MODULE disp_tabctrl1 OUTPUT.
IF flag_c = 1.
    READ TABLE it_create_data INTO wa_material_data
         INDEX tab_ctrl1-current_line.
ELSE.
    READ TABLE it_material_data INTO wa_material_data
         INDEX tab_ctrl1-current_line.
    IF sy-subrc = 0.
      IF ok_code_0101 = '&SEL1'.
        mark = 'X'.
      ELSEIF ok_code_0101 = '&DSEL'.
        mark = ' '.
      ENDIF.
    ELSE.
      LOOP AT SCREEN.
        IF screen-name = 'MARK'.
          screen-input = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
index_t = tab_ctrl1-top_line.
index_d = tab_ctrl1-top_line + n.
ENDMODULE.                 " DISP_TABCTRL1 OUTPUT

Select columns from table for display in alvgrid.

Hi all,
i have the following:
i do select a tablename and pass it as a parameter. then this table is loaded into an internal table and displayed in an alv-grid.
what i now want to do is a step between the both:
after the internal table with its structure is loaded, i want to display the field columns and i want them to be selectable so that in the next step the alv - grid is selected only with the selected columns ( just now it allways runs with all columns - even the not needed ).
Any ideas for that would be appreciated. Is there some tutorial on that or some sample ?

hi
chk this sample code:
*REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid,
      gt_events     type slis_t_event,
      gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
              I.e. Field type may be required in-order for
                   the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
            it_events               = gt_events
            is_print                = gd_prntparams
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
Form TOP-OF-PAGE                                                 *
ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
           i_logo             = 'Z_LOGO'.
endform.
      FORM USER_COMMAND                                          *
      --> R_UCOMM                                                *
      --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN '&IC1'.
Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
*&      Form BUILD_EVENTS
      Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_PAGE' to ls_event-form.
    append ls_event to gt_events.
endif.
    read table gt_events with key name = slis_ev_end_of_list
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_LIST' to ls_event-form.
    append ls_event to gt_events.
endif.
endform.                    " BUILD_EVENTS
*&      Form BUILD_PRINT_PARAMS
      Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform.                    " BUILD_PRINT_PARAMS
*&      Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*&      Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
**reward if helpful
regards,
madhu

How to insert select columns from one internal table to another

Hi,
How to insert select columns from one internal table to another based on condition as we do from a standart table to internal table.
regards,
Sriram

Hi,
If your question is for copying data from 1 int table to other ;
we can use
APPEND LINES OF it_1 TO it_2.
or if they have different columns then:
loop at it_1 into wa_it1.
move wa_it1-data to wa_it2-d1.
apped wa_it2 to it_2.
clear wa_it2.
endloop.
thnxz

How to display only selected columns in the table on the tableview

Hi All,
I am displaying in the below tableview the data from the SFLIGHTS tables in the tableview using flow logic. It displays all the columns in the database table. How can I set in the code to display only selected columns and not all columns.
Also, in these columns displayed I want to make the key columns of SFLIGHT as non editable and the rest of the columns in SFLIGHT editiable. Can you please kindly share the code to implement this.
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page>
    <htmlb:form>
      <htmlb:tableView id              = "tv1"
                       visibleRowCount = "10"
                       selectionMode   = "lineEdit"
                       table           = "<%= flights %>"
                       filter = "SERVER"
                       sort = "server"
                       iterator        = "<%= iterator %>" />
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Thanks
Karen

Hi,
   Please try this code.
<!-- To display Table control on BSP page with table internal table it_hist --!>
          <htmlb:tableView id              = "TV_HIST"
                           headerText      = "Previous History"
                           headerVisible   = "TRUE"
                           footerVisible   = "TRUE"
                           design          = "ALTERNATING"
                           selectionMode   = "LINEEDIT"
                           visibleRowCount = "5"
                           fillUpEmptyRows = "TRUE"
                           table           = "<%= it_hist %>"
                           width           = "500" >
<!-- to show selected columns give required field name --!>
<htmlb:tableViewColumns>
<htmlb:tableViewColumn columnName          = "FIELD1"
                                     title               = "COLUMN1"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD2"
                                     title               = "COLUMN2"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD3"
                                     title               = "COLUMN3"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<!-- to make column editable set edit property to TRUE --!>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     edit = "TRUE"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
            </htmlb:tableViewColumns>
          </htmlb:tableView>

How can I select columns from a table EMP, using Select statement?.

Hi Friends,
How can I select columns from a table EMP?.
I want to select columns of EMP table, using select statement.
Please reply me urgently.
Shahzad

Something like this:
scott@DBA> select empno,ename,job from emp;
     EMPNO ENAME      JOB
      7369 SMITH      CLERK
      7499 ALLEN      SALESMAN
      7521 WARD       SALESMAN
      7566 JONES      MANAGER
      7654 MARTIN     SALESMAN
      7698 BLAKE      MANAGER
      7782 CLARK      MANAGER
      7788 SCOTT      ANALYST
      7839 KING       PRESIDENT
      7844 TURNER     SALESMAN
      7876 ADAMS      CLERK
      7900 JAMES      CLERK
      7902 FORD       ANALYST
      7934 MILLER     CLERK
14 rows selected.Check the documentation:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#sthref9697
Message was edited by:
Delfino Nunez

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

How to use selection column in a table control

I have given the name of the selection column to be 'DEF_SEL',now i want to select rows in the table control using the 'selection column attribute' and maniupulate it programmatically so that i would transport the rows selected using selection coulmn to a different table control.How would i do this?

Hi raja,
Once you have the table cobtrol built using the extra field in the internal table, all the selected rows will have DEF_SEL = 'X'.
Now you can loop your internal table and filter the records which were selected.
in pai modules:
loop at itab where DEF_SEL = 'X'.
Move itab information inrto another internal table.
append itab_new.
endloop.
have another table control which shows the data in the itab_new.
regards,
Ravi

TABLE + BUTTON : NO LEADSELECTION + No Select column

Similar Messages

Maybe you are looking for