Table Calculations Help

Hello
I have created a form with a table. I need the value of the end result (from the table total) to multiply another numeric field. The field is nowhere near the table. I can attach the form to this message for reference.

The forums aren't accepting attachments at the moment - you could put your pdf on acrobat.com and post the link here.

Similar Messages

How do I total across multiple Tables? Help!

how do I total across multiple Tables? Help!
I feel like a complete noob.

Hi Marc,
There is no function explicitly for that sort of array calculation in Numbers.
My favorite way is to use a list of Table Names and the INDIRECT(ADDRESS) function combination to produce a SUM across tables. I'm making the assumption that you want to do something like adding up all the values in a particular cell of multiple tables. For example "give me the total of all the A1 cells in tables T1, T2, T3 and T4". For this I would use the formula:
=INDIRECT(ADDRESS(1,1,1,,A))
to grab the cell contents of the table names mentioned in column A of a summary table. Once you have them collected in your summary table, add them up.
Here's a screen shot...
Hope that gives you an idea for approaching this problem.
Jerry

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote on table mod

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote in table mode inpages '09?

Footnotes can only be inserted in the main text area between the margins on a Word Processing document.
Peter

F4-Help without using a table search help

Hi,
We´re using CRM 2007 and I have created several F4-Helps for different fields on the webui.
There it was always necessary to use an existing table search help in the GET_V-method:
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = lv_help_id   "search help name
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap
      iv_trigger_submit           = abap_true.
But how can I create a f4-help without an existing search help. I have an internal table that I want to be shown like an f4-help (not as dropdown -> a dropdown-field wouldn´t be a problem).
Structure of the internal table: COML_PROD_CAT_REL_F4
Thanx for help.
Greetings,
Sven
Edited by: Sven Keller on Aug 13, 2008 4:26 PM

Hi Sven,
you already pasted the correct call for creating a value help. Now what you have to alter is the variable lv_help_id to reflect a F4-Valuehelp class.
      CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = '(CL_CRM_UIU_BP_IDTYPE_2_F4)' "#EC NOTEXT
          iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap.
As you can see CL_CRM_UIU_BP_IDTYPE_2_F4 is a normal ABAP class implementing interface IF_BSP_WD_CUSTOM_F4_CALLBACK. Please take a look at it.
It should not be very hard to implement the single method
cheers Carsten

How to Transport Rate Tables/Calculation Sheets/Agreements etc

Hi All,
How to add Rate Tables/Calculation Sheets/Agreements etc in a Transport Request ?
Because while creating its not asking for Transport reequest.
Reply ASAP pls.
TM - 9.0
Thanks,
Michael.

Hi Michael,
We has the following for facilitate our life.Create templates for main objects.
Then transport this objects (templates) and create again.
Best regards.
Renato Okamoto

Help with table calculations

Hi, all, I am working on a form that was previously made in Excel. I wanted to remake this in an expandable pdf fillable so that I can add the accessibiltiy information to the form. The first link is to the static pdf converted from Excel here:
https://acrobat.com/#d=lIGyn*lpuWSQ-Qzkklml6w
The second link is the the form as my strained brain has recreated it. I'm sure there is probably a better method than I have chosen and I am open to all suggestions. But I can't get the table to total.
In the first table, all the calcs work correctly, ie 11, 12, 13, 14 and the total from 14 does show up in 15. but I need 17 to show the amount after the Discount (#16) is deducted. You would think something simple would do the trick, like SubTotal - Discount. That doesn't work.
Column 19 should total in the footer row next to 21. It doesn't. And column 23 should total into space #24. I have been trying for hours at a time to come up with the magic script to make this form work but......now I've decided to grovel for help.
https://acrobat.com/#d=mzovRUkKit7JnPVebPKgZw

Hi,
Here is your form back to you: https://acrobat.com/#d=a06D-SL7SK58ZulXCKNSuw. Please note that all of the scripts are FormCalc, as we are using the sum function and the wildcard. Neither of these will work in JavaScript.
Have a look at this post on how to reference objects, in particular the deomonstration of Control+Click:
http://www.assuredynamics.com/index.php/2011/05/som-expressions/
Also with buttons with linear gradient I would change the click behaviour from Inverted to Outline or None. It will be a little easier on the eyes. I have changed the two Add buttons. Also I think that you are getting in to readibility issues with the contrast between the button background and the black caption. I would recommend a read of this post, which outlines an approach to primary buttons (like the add rows) and secondary buttons (like the delete rows):
http://www.assuredynamics.com/index.php/2010/12/buttons/.
Maybe this discussion on colours:
http://www.assuredynamics.com/index.php/2011/02/any-colour-as-long-as-its-black/
Hope that helps,
Niall

Data format in pivot table calculated item

Hi All,
I've got a pivot table with a dimension on rows and a dimension on columns and a measure. I have a "new calculated item" based on the dimension on the columns which does the following: ( ($2-$1) / ($1) ) *100
I want this calculated item shown as a percentage like 1,2% but the measure must stay a whole number like 1234 (no decimal places or percentage symbols) any suggestions on how to achieve this?
Thanks in advance!
Gilles

Hi Kishore,
It is not helpful, I mean, it doesn't solve my problem. But nice post!
What I have is the following:
--------C1------C2-----C3
R1|--123--|--345--|--678--|
R2|--124--|--346--|--679--|
R3|--125--|--347--|--670--|
What I want is the following:
--------C1------C2-----C3---------calculated item
R1|--123--|--345--|--678--|--(($2-$1) / ($1) ) *100)
R2|--124--|--346--|--679--|
R3|--125--|--347--|--670--|
the column results must remain in the same format, but the calculated item must be in the format %9.99 (to see the percentage change)
any other suggestions?

Expanding table: Calculating difference to value from previous row

Hi there,
I am a complete newbie to LiveCycle Designer (ES2) and have created below document with an expanding table.
Shared Files - Acrobat.com
My aim is to make the form user friendly by adding a calculation in the field "Twist" which calculates the difference from the current row to the previous row.
I have no idea about Java Script, I am afraid, and also don't know if this is possible at all so it's probably a bad idea after all.
The reason for setting it up as an expanding table is so that the form can be used for all 32 instances the form would be used for (they would all require different amount of rows altogether).
The calculation would start in row 2 (Checklist.Table1), take the twist value entered in row 2 and calculate the difference to the twist value entered in row 1.
Then in row 3, it would calculate the difference between twist value in row 3 to row 2 etc.
So subtract value of field in rown with value in rown-1 or something in this direction.
Is there anyone at all who could help me with this at all?
I'd be very grateful for any advice you could give me.
Thanks a lot!
Mathilda

Not sure what happened with the formatting there, try this;
if (Row1.index > 0 && !Row1.resolveNode("NumericField4[0]").isNull)
    var prevTwist = Table1.resolveNode("Row1[" + (Row1.index - 1) + "].NumericField4[0]").rawValue
    var result = Math.abs(3000 / (Row1.resolveNode("NumericField4[0]").rawValue - prevTwist));
   this.rawValue = result;
else
    this.rawValue = "";

Calling A Single Value From A Channel To Output To A Table Need Help

I have populated a table that contains every value in every channel of my data set. I am now attempting to do channel calculations in order to come up with weighted averages and an overall average for the days worth of test. This data will be outputted to a new table called 'Total Table'. This Total Table is to only have one value per channel.
The issue I am running into is 2-fold. When doing channel arithmetic, primarily Channel Sums using 'ChnSum' DIAdem does not truncate the entire data set into a new data set. It retains all the values and appends the last block with the sum of the entire channel set. I need to either be able to pull that last value dynamically (as not all my data sets are of equal length) or I need to generate a new channel that only has the sum value. Is there a way to do this?
Here is what I have been attempting to do but to little avail. Attached is a screenshot of what the table output looks like after this code is processed.
'Populate Total Table With Values From Above Calculations
For j = 1 to selectData.MultiSelection.Count
Counter = Counter + 1
length = ChnPropValGet("[" & selectData.MultiSelection(j).Index & "]/Cumulative Fuel Used", "Length")
   If Counter = 2 Then
   [ A Bunch Of Channel Calculations That Output New Channels ]
   Call View.Sheets("Total Table").Areas("Area : " & Counter).DisplayObj.Columns.Add(ChnFind("Ch("& selectData.MultiSelection(j).Index &") > 0 " , length - 1))
End If
Next
Any help would be much appreciated.
Thanks,
~Nate
Solved!
Go to Solution.
Attachments:
TotalTable.JPG ‏212 KB

This is my latest version of the code and it sort of works but its referencing my "Fan Speed" channel for some reason rather than my "Cumulative Fuel Used" channel. Im a little stumped
For j = 1 to selectData.MultiSelection.Count
Counter = Counter + 1
length = ChnPropValGet("[" & selectData.MultiSelection(j).Index & "]/**bleep** Fuel Used", "length")
If Counter = 2 Then
Call View.Sheets("Total Table").Areas("Area : " & Counter).DisplayObj.Columns.Add(Data.Root.ChannelGroups("[" & selectData.MultiSelection(j).Index & "]").Channels("**bleep** Fuel Used").Values(length))
End If
Thanks,
~Nate

Calculations Help Needed

Here is the situation:
I am doing a quick "play around" between Pages/Word, Numbers/Excel and Keynote/Powerpoint.
This is to refresh my memory to windows, since I am going into a short-term (5 - 7 or 8 years) of IT.
I need help with calculating the average time of sunrise for one week, using two sheets.
The times given are 5:40am, 5:41am, ........ 5:46am. The cells: B5 - B11 (Sunrise Column for week 1). The name for this sheet is "Weekly".
The equation is going to be place in cell B5 of sheet named "Monthly" representing the average time of sunrise for that week.
In excell, I understand "Weekly!B3" refers to cell B3 on worksheet "Weekly".
How would I do this in numbers? (I will figure out how to do it in Excell.)
Thanks again guys (and ladies)!

In fact, the problem is not the one which you described.
The way to reference a cell or a range of cell is perfectly described in iWork Formula and Functions User Guide in which every user may get it.
The important thing to know is that in NumbersLand, 5:40am isn't a time value but a date_time one.
In the tables above, I deliberately choose to insert time values entered at different dates so, the formula inserted in Monthly :: B5
=AVERAGE(Weekly :: B5:B11)
return an exact result which doesn't match what we are wanting to get.
This is why I used the auxiliary column C
In Weekly :: C5, the formula is :
=TIMEVALUE(B)
Apply Fill Down to insert the formula in rows below.
The formula returns the time value using the unit day.
In Monthly // C5, the formula is :
=AVERAGE(Weekly :: C5:C11)
but I guess that you don't wish to get the result in this format.
In Monthly // D5, the formula is :
=DURATION(0,AVERAGE(Weekly :: C5:C11))
You may edit the format of this duration cell as you want.
An alternate formula would be :
=TIME(,AVERAGE(Weekly :: C5:C11)*24*60,)
But CAUTION, one more time, as you may see, the cell will contain a date component.
Yvan KOENIG (VALLAURIS, France) vendredi 27 mai 2011 12:20:15
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Internal Table Operation Help Required

Hi
I have to insert 8 counters p1-p8 in a field BANFN of ITAB1.
Like this their are 3 more fileds.I have to show the no. for PR released frm JAN-DEC in ALV format.I had doen the calualation,but unable to insert these conters in ITAB1 to do final calculation & display the result.
Please help me.
I had used : insert p1 into itab1-banfn where sy-index 1.
Like this I had tried out many comands,but al in vain.PLZ help me in this regard.
Regards.
Vipin

There are 8 fileds in my internal table,in which 1st one is for MONTH(JAN-DEC).
The ALV is only suppose to display 12 rows,containing each month per row.
Now for each month I have to display the PR converted to PO & the avg lead time for each month.So I had calu all the data ,but now I have to insert 12 counters in 4 fields.one for No of PR converted to PO in each month,than one for AVG LEAD TIME for each month.so there has to be 12 + 12 counters for each row.Similar operation I have to perform for the PR pending fo PO.So there has to be 24 more counters for again 2 diff fileds.Now I had calcuated the data,but the problem is this ,,,,,how to insert each ctr in each row.
EG: insert ctr1 into itab1-banfn where itab1-mmyy = 'January' or sy-index = 1.
insert ctr2 into itab1-banfn where itab1-mmyy = 'Febuary' or sy-index = 2.
move crt1 to itab1-banfn where sy-index = 1.
None of the operation is working.
Like this i have to insert 48 counters in all rows for these 4 diff fileds.
Pl help me in thsi regard ,if possible.
regards.

REPORT CALCULATION HELP NEEDED!!!

Hello
I have a report where i need to do some calculation .
I have 3 columns in my report Businesstype , Business Code & Fact . When i display the report i see the Business Code 1 - Business Code 5 in 5 rows . But sometimes the report contains Business Code 6 along with Business Code 1 - Business Code 5 then Business Code 6 needs to calculate SUM(Business Code 1-6) and display in one row .
Could anybody please leave me any suggestions .

Hi there,
Create a table
- On the first row create for each group to populate the data for Business Code [1-n] with a second column containing numeric values.
- On the second row use the sum function using current-group() function for the value that you want to calculate the sum for.
Hope this helps.
Let me how you get on.
cheers...

Create a table calculating amount of days in InfoPath form

Hello,
I am creating an InfoPath form and I want to have a table that will calculate the days needed to complete a project, it will allow the user to enter start dates and end dates and as that happens one row will have the calculated length of days it will take
to complete based on use input and it would be real-time so no need to manually press a button to update.
Here is my table for example:
The first row will be the row that has the Total project time with the start time and end time based on user input.
Is this something that can be done in InfoPath without any code? I am unable to use code so unfortunately that isn't an option.

Hi compuluv,
Based on your description, my understanding is that you want to Calculate the length between two date picker controls in InfoPath using rules and formulas - no code!
Use rules, conditions, and the number(), floor(), and
substring() functions in formulas to calculate the difference between two date picker controls in InfoPath.
Here is an article about it, you can use as a reference:
http://www.bizsupportonline.net/infopath2007/calculate-date-difference-infopath-rules-formulas.htm
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Exceptions Table query help?

I ahve two exceptions tables cust_day_of_week and cust_date
Cust_day_of the week has following fields:
Key_Id,Day_week,begintime,endtime
1,1,8,20 1--is oracle number for sunday
cust_date has following fields
Key_Id, exception_date,begintime,endtime
2,08/24/2011,8,20
i am writing a function to get the key_id to use for some purpose by checking if the sysdate falls in any of the exception
say sysdate is sunday then profile ID =1 shud be returned
if date exception is to be checked then the Cust_day table shud be checked...
is there a way to get the profileid from both tables in one function by chekcing which exception is fullfilled....Hope i am clear...
say i wnat to check if the sysdate day is sunday or not..if yes then return profileid =1
else if i want check if tuday =08/24/2011 the retrun profile id =2 but this shud be done in one function if possible...is it possible...
This is the function i planning to create....
how to check the for the Cust_date table date exception in the same query...
FUNCTION key_ID
( v_date IN DATE DEFAULT SYSDATE
RETURN Number IS
ret_value number:=0
select Key_ID into ret_value from cust_day_of_week
where (to_char( v_date,'D') in (select day_week from cust_day_of_week ))
retun ret_value;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:'||SQLERRM);
RETURN 0;
END ;
Edited by: 874167 on Aug 25, 2011 1:43 PM

Does this help?
It's not a function, but I don't see a need for one.
drop table cust_date purge;
drop table cust_day_of_week purge;
create table cust_day_of_week (key_id number,Day_week number,begintime number,endtime number);
insert into cust_day_of_week values (1,1,8,20);
insert into cust_day_of_week values (2,2,8,20);
insert into cust_day_of_week values (3,3,8,20);
insert into cust_day_of_week values (4,4,8,20);
insert into cust_day_of_week values (5,5,8,20);
insert into cust_day_of_week values (6,6,8,20);
insert into cust_day_of_week values (7,7,8,20);
create table cust_date (key_id number,exception_date date,begintime number,endtime number, constraint edunique unique(exception_date));
insert into cust_date values (8,to_date('08/24/2011','MM/DD/YYYY'),8,20);
insert into cust_date values (9,to_date('08/25/2011','MM/DD/YYYY'),8,20);
commit;
select key_id from (
SELECT key_id from cust_date where exception_date = trunc(sysdate)
union all
SELECT key_id from cust_day_of_week where day_week = to_number(to_char(sysdate,'D','nls_date_language = AMERICAN')))
where rownum =1;I am not 100% sure that you are allowed to rely on union all preserving the order. I have not seen otherwise, but I am not sure whether it's guaranteed.
As documentation doesn't say it's guaranteed, it probably isn't.
to be sure, this is a safe way of doing it. Maybe someone else can say whether there is a shorter way of doing that:
select key_id from (
select key_id ,rank() over (order by sorted) rnk from (
SELECT key_id, 1 sorted from cust_date where exception_date = trunc(sysdate)
union all
SELECT key_id, 2 sorted from cust_day_of_week where day_week = to_number(to_char(sysdate,'D','nls_date_language = AMERICAN')))
) where rnk = 1;

Problem with constraint in a table..help required..

Hi ,
i need to create a table which has an attribute year_joined and need to set a constraint that the year_joined should be less than or equal to the current year (year obtained from sysdate (YYYY)) ..
can any one help me with the create statement required...
eg: create table test(year_joined number, constraint c_year check(year_joined< = ?));
i could not use a sub query in the create statement.
help req..
thanks,
sri

Satyaki,
I tried but fail. Could you please tell the way how it can be implementaed in CHECK constraint.
SQL> CREATE TABLE T ( YERR_JOINED NUMBER(4) , CHECK (YERR_JOINED <='2007'));
Table created.
SQL> drop table t;
Table dropped.
SQL> CREATE TABLE T ( YERR_JOINED NUMBER(4) , CHECK (YERR_JOINED <= TO_CHAR(SYSDATE,'YYYY')));
CREATE TABLE T ( YERR_JOINED NUMBER(4) , CHECK (YERR_JOINED <= TO_CHAR(SYSDATE,'YYYY')))
ERROR at line 1:
ORA-02436: date or system variable wrongly specified in CHECK constraint
SQL>

Table Calculations Help

Similar Messages

Maybe you are looking for