Table columns is larger than the page.

Post Author: krutoj_pablo
CA Forum: General
Hi.I've developed the report and it seems that column in the table (not crosstab) i'm using is wider than the visible area of the page. I've tried to fix this problem by changing page setup (from portrait to landscape), but this does not solve the problem. Some columns still is not visible. Is there any way Crystal Reports cut the invisible columns and place them to next page ?

Post Author: V361
CA Forum: General
Not sure I understand, but you could insert a section and move the overflow to the new section. Otherwise, try a smaller font, Try 8.5 by 14 in landscape mode, if that doesn't work, you may need to check the size of your columns, and post again with more details about the column size, text length etc....

Similar Messages

How do I get an image which is larger than the page to scroll?

I am new to CSS and CS4 and my problem relates to a gif image which is larger than the page.I cannot get the image to scroll either vertically or horozontally. This image is of a family tree graph and I cannot reduce it's size any more otherwise it would not be ledgeable. I want the image to scroll vertically underneath the fixed header. I am using a twoColHybLtHdr template. Also when I have corrected this problem will the CSS then apply to all further pages and could that cause other problems?
Thanks in anticipation

Thank you for your advice. I have been adjusting the CSS settings in the Container and the Main Content. I have now achieved both scroll bars, that cover all pages. The problem I have now is getting the Bottom (horizontal) scroll bar onto the bottom of the browser window. If I set the height as auto or inherit then the scroll bar stays at the bottom of the page, so you have to scroll down to find it. I can set the height in px and this is fine for one window resolution but it doesn't automatically reposition for the various different resolutions, is this possible to achieve? Can anyone please help me resolve this last obstacle

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

Printing a component that is larger than the paper size

Hi,
I am trying to print a component that may be larger than the size of the paper being used. Is there some way to get it to split between pages - ie, if it's larger than the page, it is printed over two or more pages?
The component in question is a JTextArea. Would it be better to get the text from it and use the graphics drawString rather than the component's paint method?
The relevant part of the code is below.
Thanks,
Helen
     //cast the Graphics object to a Graphics2D object
     Graphics2D g2 = (Graphics2D) g;
     //set the origin to be (0,0)
     g2.translate(format.getImageableX(), format.getImageableY());
     //if double buffering is enabled, disable it before printing
     boolean b = testForDoubleBuffering(c);
     if (b == true){
     disableDoubleBuffering(c);
     //tell the Component to draw itself to the printer
     comp.paint(g2);
     //if double buffering was enabled, reenable it once printing has happened
     if (b == true){
     enableDoubleBuffering(c);
     //return this constant to tell the PrinterJob that the page has been printed
     return Printable.PAGE_EXISTS;

Hi,
I am trying to print a component that may be larger
than the size of the paper being used. Is there some
way to get it to split between pages - ie, if it's
larger than the page, it is printed over two or more
pages?
The component in question is a JTextArea. Would it be
better to get the text from it and use the graphics
drawString rather than the component's paint method?
The relevant part of the code is below.
Thanks,
Helen
     //cast the Graphics object to a Graphics2D object
     Graphics2D g2 = (Graphics2D) g;
     //set the origin to be (0,0)
g2.translate(format.getImageableX(),
format.getImageableY());
//if double buffering is enabled, disable it before
printing
     boolean b = testForDoubleBuffering(c);
     if (b == true){
     disableDoubleBuffering(c);
     //tell the Component to draw itself to the printer
     comp.paint(g2);
//if double buffering was enabled, reenable it once
printing has happened
     if (b == true){
     enableDoubleBuffering(c);
//return this constant to tell the PrinterJob that
the page has been printed
     return Printable.PAGE_EXISTS;I should add that this is part of a class that implements Printable. However, it is being called by a Book class with the Book's append() method. It is the Book class that is being printed by the PrintJob:
     Book book = new Book();
     book.append(new PrintableClass(c), format);
     //set the pageable class to be the book, with the user-selected format
     job.setPageable(book);
     //if the user clicks the print button, start the printing process, otherwise cancel the print
     if(job.printDialog()){
     try {
          job.print();
     } catch(PrinterException pe) {
          System.out.println("Error printing: " + pe);
Thanks,
Helen

How to import PDF image into Pages manuscript that is larger than the text bed margins

How do I import a PDF image into a Pages book manuscript, whose dimensions are larger than the global text bed margins? Any imported PDF image is automatically shrunk to fit within the text bed. I know I can set up a single page with wider margins and a text bed within it, but I want the image to import to a page already within the manuscript sequence, where the text bed margins are set and constant.
Larry Kettelkamp
[email protected]

By default it should be dragging in as a floating image and not part of the text.
What version of Pages are you using?
In Pages 5 this is:
Format > Arrange > Object Placement > Stay on Page > Size > Original size
Peter

Page header plus page footer too large for the page in crystal report 2008.

Hi,
when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
regds,
samapth

This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
page header plus page footer too large for the page.
Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
Ludek

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

Mail Crashes when I try to open or attach PDFs larger than one page

Hi All....
Mail (2.1) crashes whenever I try to view or attach a PDF larger than 1 page. Here's a snippet from the latest crash log:
Version: 2.1 (752)
Build Version: 1
Project Name: MailViewer
Source Version: 7520000
PID: 157
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x9064708c
Thread 0 Crashed:
0 com.apple.CoreGraphics 0x9064708c op_TJ + 0
1 com.apple.CoreGraphics 0x903ca0c4 handle_xname + 168
2 com.apple.CoreGraphics 0x903c9da8 read_objects + 444
3 com.apple.CoreGraphics 0x903c8f68 execute_stream + 108
4 com.apple.CoreGraphics 0x903c8eb4 CGPDFScannerScan + 96
5 com.apple.CoreGraphics 0x903ccb7c CGPDFDrawingContextDraw + 444
6 com.apple.CoreGraphics 0x903c52f0 CGContextDrawPDFPage + 184
7 com.apple.CoreGraphics 0x903c4180 CGContextDrawPDFDocument + 240
8 com.apple.AppKit 0x93a8b2fc -[NSPDFImageRep draw] + 252
9 com.apple.AppKit 0x9373e968 -[NSImageRep drawInRect:] + 288
10 com.apple.AppKit 0x93784dc0 -[NSImage drawRepresentation:inRect:] + 424
11 com.apple.AppKit 0x93784be4 -[NSImage _drawRepresentation:] + 168
12 com.apple.AppKit 0x9373b214 -[NSImage _cacheRepresentation:stayFocused:] + 208
13 com.apple.AppKit 0x9378495c -[NSImage _cacheRepresentation:] + 32
14 com.apple.AppKit 0x93752b20 -[NSImage drawInRect:fromRect:operation:fraction:] + 1148
15 com.apple.AppKit 0x938586b4 -[NSImage drawAtPoint:fromRect:operation:fraction:] + 152
16 com.apple.AppKit 0x938584e4 -[NSTextAttachmentCell drawWithFrame:inView:] + 924
17 com.apple.mail 0x00077e68 0x1000 + 487016
18 com.apple.mail 0x00077dc4 0x1000 + 486852
19 com.apple.AppKit 0x938580fc -[NSTextAttachmentCell drawWithFrame:inView:characterIndex:layoutManager:] + 36
20 com.apple.AppKit 0x93853d78 -[NSLayoutManager(NSTextViewSupport) showAttachmentCell:atPoint:] + 864
21 com.apple.AppKit 0x938539d4 -[NSLayoutManager(NSTextViewSupport) showAttachmentCell:inRect:characterIndex:] + 84
22 com.apple.AppKit 0x93779e34 -[NSLayoutManager(NSPrivate) _drawGlyphsForGlyphRange:atPoint:parameters:] + 5784
23 com.apple.AppKit 0x937c7158 -[NSTextView drawRect:] + 664
24 com.apple.mail 0x00028d50 0x1000 + 163152
25 com.apple.AppKit 0x937c6ba8 -[NSTextView _drawRect:clip:] + 1176
26 com.apple.AppKit 0x9372fe18 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 404
27 com.apple.AppKit 0x93732b60 _recursiveDisplayInRect2 + 84
28 com.apple.CoreFoundation 0x907ec3c4 CFArrayApplyFunction + 416
29 com.apple.AppKit 0x9372ff2c -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 680
30 com.apple.AppKit 0x93732b60 _recursiveDisplayInRect2 + 84
31 com.apple.CoreFoundation 0x907ec3c4 CFArrayApplyFunction + 416
32 com.apple.AppKit 0x9372ff2c -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 680
33 com.apple.AppKit 0x9372f3e0 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 196
34 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
35 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
36 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
37 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
38 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
39 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
40 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
41 com.apple.AppKit 0x93750044 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 192
42 com.apple.AppKit 0x93729054 -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 384
43 com.apple.AppKit 0x9371e348 -[NSView displayIfNeeded] + 248
44 com.apple.AppKit 0x9371e1b8 -[NSWindow displayIfNeeded] + 180
45 com.apple.mail 0x00025194 0x1000 + 147860
46 com.apple.AppKit 0x9371e064 _handleWindowNeedsDisplay + 200
47 com.apple.CoreFoundation 0x907dc73c __CFRunLoopDoObservers + 352
48 com.apple.CoreFoundation 0x907dc9dc __CFRunLoopRun + 420
49 com.apple.CoreFoundation 0x907dc47c CFRunLoopRunSpecific + 268
50 com.apple.HIToolbox 0x93208740 RunCurrentEventLoopInMode + 264
51 com.apple.HIToolbox 0x93207dd4 ReceiveNextEventCommon + 380
52 com.apple.HIToolbox 0x93207c40 BlockUntilNextEventMatchingListInMode + 96
53 com.apple.AppKit 0x936eaae4 _DPSNextEvent + 384
54 com.apple.AppKit 0x936ea7a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
55 com.apple.AppKit 0x936e6cec -[NSApplication run] + 472
56 com.apple.AppKit 0x937d787c NSApplicationMain + 452
57 com.apple.mail 0x000871d8 0x1000 + 549336
58 com.apple.mail 0x00087080 0x1000 + 548992
Part of me thinks that this doesn't actually have anything to do with mail. I had problems with Safari and Finder crashing every time I they tried to open a PDF. This was partially solved by installing Adobe Acrobat Reader and designating it as the default PDF veiwing app, but this option didn't appear when I ran Mail for the first time after installing Reader.
At this point, I've repaired the disk and repaired permissions, but that's about as much as I know how to do. I'd be grateful for any help that anyone can offer.
Thanks!
Sam E.
1GHz PowerbookG4, Dual 2.5GHz G5 Mac OS X (10.4.8)

Hi Sam.
I don’t know what’s going on. I suggest reinstalling the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with your computer:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update (which you say you’ve already done), no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Why is menu size so much larger than the files?

I am somewhat perplexed - I'm making a single-layer dvd and have a simple single screen theme (no animation) - it has one drop zone. The movie has 28 chapters so there are five of them, but so far I've added only one montage of photos to each menu page - it's a "mobile" quality in media browser and ave only 10 - 20 MB, then one song. On average these movie clips are 1:00 to 2:00 min long and the music is cut to that length. So, all told, it's probably less than 110 MB in files - but when I look at the project properties, the menus are 3301 MB!!!
The movie itself is only 1.1 GB so what is going on?
It's preventing me from doing the project and I've got no idea why it's making the menu size so much larger than the file sizes?
Can you please help me figure out what to do?
Alexa

The 2 min clips were natively 2 min - I had each one separate and actually converted to media browser in "mobile" size (b/c the drop zone was 4 x 6 in size in the theme). They were tiny - in most cases I was shortening the audio (e.g. the song was 4 minutes and I was setting the loop to only 1:30 b/c that's how long the video clip was on the menu).
BUT, to resolve the question (I always like to post the answer) - I ended up duplicating the project to try to reimport the video. It was a fresh iDVD project and I happened to click on the project tree of screens - and, lo and behold, the ENTIRE menu was duplicated for some reason (and the movie, actually). I went back to the original and it was the same! I have no idea how that would happen do you? It only had one main menu screen - and then an entire duplicate menu - which I wouldn't even know how to access if I didn't see it in the project menu tree?
The only think of is that at one point I added a title menu link to the scene selection - it gave me a warning that my menu was more than 12 minutes, did I want to fix or ignore and fix later - which confused me b/c it was under 12 min, then but I clicked ignore. Does that create an alternate title menu and send people back to something else?
Anyway, I deleted the entire extra scene selection menus (5 of them) and it was back to under 4 GB.
So, I was able to burn, but still wondering about creating the "title menu" link on scene selections? It drives me crazy that it doesn't automatically do that so I like to add "main menu" links.
Thanks for your help!
Alexa

Crystal Reports 9: Page Header plus Page Footer is too large for the page.

Hi,
I have a report that has the following sections.
GH1
GH2a
GH2b - has a sub report
GH2c - has another sub report
GH3
GH4
GH5
details - suppressed
GF5 - suppressed
GF4 - suppressed
GF3 - suppressed
GF2 - suppressed
GF1 - suppressed
The report works fine wehn I run it using Crystal Designer.I am using CR version 9.2.2.693.
When I try to load the report in my application, I get the following error.
Crystal Report Windows Forms Viewer
Page Header plus Page Footer is too large for the page.Error in File rptName.rpt:
Page header or footer longer than a page.
OK
There are no 'suppress blank sections' option set in the sections where the sub-Reports are.
I also tried setting the No Default Printer option.
The report gets loaded from the application only when I set 'New Page after' in the sections where there are sub-Reports.
I do not want to do this; Is there a workaround?
Thank you.

Can someone tell me if this problem is being worked on as it looks as thogh none of the problems regarding the message u2018Page Header plus Page Footer is too large for the pageu2019 have been addressed.
We have several reports that were written in Crystal 7 (I think) and worked in Crystal 9 and X1R2 but now give the above error. We have tried jigging the report in line with the various suggestions but at best can get them to run through successfully with one lot of data and then fail on the second or subsequent pages when you vary the data or report format even slightly. We can report on every bit of data separately or in various combinations but not in others. Changing the bottom page margin by 0.01 cm can cause it to fail on page 7 instead of page 530 (for example). We certainly do not have large page headers (just over 2cm) or page footers (about 0.3cm). We do have some subreports in the details section but have used 'fit to section', added 'keep together', removed u2018keep togetheru2019 from just about everything we can (in desperation) but to no avail. We cannot see a pattern to what is happening. It would be encouraging to know that someone is actually working on this fault.

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

How to manage an iTunes library larger than the capacity of my iPod?

I have a 40G iPOD and now my iTunes library is larger than that. When I last synched, iTunes automatically created an iPod list. I'm unclear on how the subset of songs was selected. When I add new music, do I have to manually move things in and out of this playlist, or is there some more clever trick?

If the library is larger than the iPod, it simply selects at random, enough songs to fit.
Here's a better way to do it yourself.
Create a new Smart Playlist.
Match rule My rating does not equal one star.
Limit to 37.5 GB (or whatever) of songs at random.
Songs you don't like rate them one star and they will not get put on the iPod or will get removed next time you sync.
Open iTunes prefs and set to Auto update only selected playlists and select this new playlist.
Also, any songs you do not want to go onto the iPod at all, uncheck them. I do this for podcasts, Christmas songs and such.
When you want to change the songs, simply select this playlist in iTunes, select all the songs and press delete.
It will empty and then fill up again based on the criteria above.
Then connect the iPod and resync it.
This is how I do it as I have ~12 GB of songs and 4 GB iPods.

How do I resize a toolbar button? It is larger than the standard buttons, even on use small icon.

I have an extension for clearing cache and it has a convenient button on my toolbar. But, the button is larger than the other buttons on the toolbar, even with "use small icons" turned on. Can I talk to the button in the userChrome.css or some other way to scale it down?

Which extension did you install?
This one:
*Clear Cache Button: https://addons.mozilla.org/en-US/firefox/addon/clear-cache-button/
<pre><nowiki>#clearcache-toolbarbutton .toolbarbutton-icon {
height: 16px !important;
width: 16px !important;
}</nowiki></pre>

I have an iphone 4s and when I try to connect it to my shared libraries; I get an icon of a circle that only fills up halfway. I have an ipad and it connects to the shared library without a problem. My library is much larger than the capacity of either

I have an iphone 4s and when I try to connect to my shared library I see an icon of a circle that only becomes half full. It does not connect. I also have an ipad, which connects without incident. My itunes library is larger than the capacity of both devices, so that cannot be the issue. How can I get the phone to connect with my shared library?

My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks

How do i change the text in a submenu diffrent than the page name? I want it wrap into two lines

How do i change the text in a submenu diffrent than the page name? I want it wrap into two lines or be a diffrent title but i can't figure out how to make any changes to the text.

Hello,
Text in Menu/Submenu canno tbe changed while using menu widget. However, if you use the Manual Menu option, then you can create your own Menu and add the hyperlinks according to your requirement.
To create Manual Menu, please follow the steps below :
1) In the Widget palette, go to "Menus" click and drag "Vertical/Hrizontal" into your artboard/workspace
2) Click on the widget itself to a blue arrow appears to the right
3) There is a drop down called "Menu Type" set it to "Manual" (as shown in screenshot) :
4) Now You can create your own Menu and add your own text and hyperlink to this Menu.
Hope this helps.
Regards,
Sachin

Table columns is larger than the page.

Similar Messages

Maybe you are looking for