TABLE CONTROL LINES COLOR CHANGE

Hi Friens.,
I need small help ie.,
Let us assume we have table control like this.,
col1 | col2 | group |
a1 | b1 | 1
a2 | b2 | 1
a3 | b3 | 2
a4 | b4 | 2
a5 | b5 | 3
a6 | b6 | 3
1) User need differentiation between groups to look and feel.,thats why I want to change the Line colors based on Group.,
2) I am getting this one .,but I made case on Sy-stepl., while scrolling it is not showing correct .,
3) Is there any good way to do this., like in ME21 CONDITIONS TAB at Item level
If any body have Idea., share with me.,
Thanks.,
Surendher Reddy.Baddam

Re: TABLE CONTROL LINES COLOR CHANGE
Posted: Nov 5, 2004 6:47 AM Reply E-mail this post
PBO >>>like thise.,
LOOP AT itab WITH CONTROL tc4_400 CURSOR tc4_400-current_line.
MODULE check_rej_hld_400.
MODULE radio_checkbox_400.
ENDLOOP.
>>>
MODULE radio_checkbox_400.
DATA : l_stf TYPE i.
DATA : l_hyd TYPE i,l_knr TYPE i.
l_hyd = 1.
LOOP AT SCREEN.
IF screen-name = 'ITAB-BATCHNO'.
IF itab-group = l_hyd. " this is group
screen-intensified = 1.
MODIFY SCREEN.
ELSEIF
screen-intensified = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ADD 2 TO l_hyd
ENDMODULE.
I made logic like this.,
Thanks.,
Surendher Reddy.Baddam

Similar Messages

How can i change the color of table control' lines?

Such as the subject. Thanks in advance!

Hi,
Please check,
TABLE CONTROL LINES COLOR CHANGE
color rows in table control
Regards,
Hema.
Reward points if it is useful.

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Table control lines cannot be controlled in Batch Input session ?

I am using a program which creates Batch Input sessions for the transaction FCHR (Online cashed checks) . The second screen is that of a table control where the check number is entered.
I observed that while doing SHDB, if we tick the default size then changing the desktop resolution has no effect on the number of lines in table control - we see 14 lines in both cases.However, when the batch input session is processed, the number of table control lines varies according to the resoution(9 lines for 800600 and approx 15 for 1024768). Selecting the 'Dynpro standard size' option while processing the session has no effect.
I know call transaction with 'default' parameter in optparam will take care of this problem. But I want to know whether Batch Input Session is known to have a problem with different resolutions.

HI..
i had the same problem once.... i dealt in the following way
while entering values in table control
1) enter value in the first line
2) look for button on application toolbar using which you can increment line
3) you will not find difference for first line but you will find it when you insert second line and go for next line.
4) now for every increment you will get table conrol as (02) if you are going for recording.
this will surely solve all issue related to table control as it solved for me
regards
Edited by: Mohit Kumar on Feb 19, 2009 12:04 PM

Table control line selection issue

HI im facing a problem in table control.
I have a table control with selection column ( single ).
First time when i select a row its is marked X in the internal table,
Now again when i select another row .. The old row still holds the value X and the new row is gettign marked as X.
The problem here is the old selection is not getting cleared in the internal table.
This is the statement used in PAI
MODIFY gt_header INDEX tbl_header-current_line FROM wa_header .
Here the previous value is not getting cleared.

KSD,
During PAI Loop, the screen flow logic loops only through the visible table control lines. In your case, the user has scrolled down and seeing line 30 to 40 (say for example) after selecting a line in first page view. This is very common with any table control.
Now user is viewing 1 to 10 lines of the TC and have selected 3rd line. User then scrolls down by pressing page-down - now PAI is triggered and the internal table's 3rd line is modified with MARK='X'. User then views lines 30 to 40 and selects 33rd line. Now table control will automatically clear the MARK in 3rd line in the Table Control only. But it is the responsibility of the developer written code to clear the same in the Internal Table.
So within PAI Table Loop, you have to check the MARK which is coming from Screen to ABAP program every-time and if it is 'X', you have to clear any other line's MARK. Remeber you should not do this for multi-select. There is an attribute of the table control LINE_SEL_MODE. The above logic of clearing other lines' MARK should be implemented only after checking this attribute.
So incidentally your solution was the appropriate one.
Cheers,
Suresh

How to determine actual table control line

Hi experts,
How can I determine the table control line in case of scrollable table control.
I tried this one, but did not worked correctly:
GET CURSOR LINE l_line_fc2.
l_line = l_line_fc2 + ctrl_mod-top_line - 1.
Everytime I try to catch the top_line of the table control its value is always 1. Is it possible?

Hi,
Current table control line will be found in SY-STEPL.
Regards
Mohammad Shaik.

Table Control BDC to CHANGE the contents problem

Hi,
I am having a problem in BDC. The screen is having a table control and I want to change the contents depending on certain conditions.
This BDC is not to upload the data but to change already existing data.
How can I dynamically know the contents of the screen or contents or the row so that I can select the correct row to be changed?

Hi,
No its not like that.
Suppose I want to update/change sheduling agreements not upload
I will be calling the transaction which will list the scheduling lines in a table control. The order of the lines in table control will be as per logic of SAP's Application program.
Now when I read the file and how will I dynamically know the exact line which should get selected.
Say my internal table is having the data to be changed but I can not determine the exact ordering of the records as per table control.
Hence I am facing the problem to know the exact ordering of table control
Let me give another example. Using ME12 transaction I am supposed to delete certain rows from info records say having condition '15EC'.
Now when I call a transction how will I know that for a particular vendor which line will contain this condition value so that can select the line and press delete
Regards,
Nitin

Table control : Need to change Single field as non editable

Hi Experts,
Plz help me out. In a table control there r 7 fields and only one field is editable. When i change the status of a record as delete in tat table control, only the deleted record (all fields)should become non-editable. Is it possible? Pls suggest.
Regards,
J. Sriram.

Hi,
In PBO of your screen
you should be using a step loop like this :
CONTROLS control1 TYPE TABLEVIEW USING SCREEN 100.
LOOP AT itab WITH CONTROL control1.
ENDLOOP.
Where the control1 is the tableview control defined in your program
and placed on your screen.
Put a second loop on screen inside this loop ant set the related attribute :
LOOP AT itab WITH CONTROL control1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'COLUMN1'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDLOOP.
So you can set cells editable or non-editable
and you can filter it which record & which field..

How to handle table control in PO change

Hi All,
R/3 is sending PO details and Vendor is using third party front end to access the PO.He has changed the PO and these changes need to be reflected in the PO. Data is coming from external sytem to R/3 through IDOC. I need to handle the changes in the PO at the ITEM level. It has the table control. I don't know about table control. Kindly help me inorder to update the PO for a particular tab in PO item(ME22N).
I have checked the process code : ORDH and FM: MPN30_IDOC_INPUT_ORDCAD
Regards
Kannaiah
Rewards for helpful answers

Hi Ravikanth,
Thanks for the reply.
I checked the PO item for the fields which need to be updated. I am unable to find some fields in the FM which i had mentioned. Shall I need to use any Userexit or include for this. If yes, can you tell me the user exit for this. I have checked the following exits: AMPL0001
LMEDR001
LMELA002
LMELA010
LMEQR001
LMEXF001
LWSUS001
M06B0001
M06B0002
M06B0003
M06B0004
M06B0005
M06E0004
M06E0005
ME590001
MEETA001
MEFLD004
MELAB001
MEQUERY1
MEVME001
MM06E001
MM06E003
MM06E004
MM06E005
MM06E007
MM06E008
MM06E009
MM06E010
MMAL0001
MMAL0002
MMAL0003
MMDA0001
MMFAB001
MRFLB001

Long text in table control lines

If i put long text buttons on the table control coulum, when the line is deleted from the table, the text for tha line are permenantly deleted before the screen is saved in the user command. how do i correct the problem ?
regards
Rendani

Use the FM for text delete when u press save button and not at table control delete command.
physically delete the line from table control and put it in internal table which can be used for deletion purpose at time of actual deletion...

Table control: Line selection single issue

Hi experts,
I have created a table control and in the screen painter I have defined the line selection as "Single" for table control.
The table control can display upto 20 lines in a screen and i can select a single record only which pertains to my requirement. if I try to select two records it will not allow.
Issue: consider i select a single record from the first 20 lines displayed in screen, then i scroll the records in the table control so that it displays the records from 21 to 40. if I select a single record now from line 21 to 40, the first record that i selected is not getting deselected. That is, totally two lines are getting selected.
How to overcome this issue
Thanks in advance
Regards
Anand

Ok
The "problem" is here:
Types: Begin of ty_ic,
ic(20),
desc(20),
sel(1) <--------------------------------
End of ty_ic.
You've ha a field for selected line and that field is used in table control definition as you've written:
"Note: wa_ic is the structure used in table control and wa_ic-sel is the mark field defined the table control attributes"
So you're using the structure WA_IC as header line of internal table IT_IC and also as input/put field of your table control (I mean the screen fields of table control are based on WA_IC).
You don't need any code in PBO to move the data from internal table to table control, because the headerline of IT_IC and field of table control are the same, infact you've implemented only the code in PAI to save the data from table control to IT_IC:
Loop at it_ic.
Modify it_ic from wa_ic index tc_ic-current_line
Endloop
t's a good solution if it needs to transfer all data to table control automatically: it doesn't need any code in PBO
but, of course, there'll be a problem when you don't need to display something, in this case you have to think a solution, I mean you have to write a code in order to avoid to display those data.
It's the case of the selected line: in your situation all selected lines keep the selection, because the code to clear IT_IC-SEL is missing: only the user can deselect a line, but if he doesn't do it, the line will remain selected after navigation.
So you make to be sure to clear all selected lines are not displayed.
You need to create a code in PAI out of the loop of table control where you clear the flag SEL, in order to do it you need to consider:
- The index of the first record displayed in table control is stored in field TC_IC-TOP_LINE
- The index of the last record displayed in table control can be calculated: the variable SY-LOOPC indicates how many rows can be displayed in table control, so the last record will be: TC_IC-TOP_LINE + SY-LOOPC.
So you need to clear the field SEL for all records not displayed, a code like this:
PROCESS PAI.
LOOP AT IT_IC.
 MODULE GET_LOOPC.
ENDLOOP.
MODULE CLEAR_SEL.
MODULE GET_LOOPC..
 TOT_LINE_DISPLAYED = SY-LOOPC.
ENDMODULE
MODULE CLEAR_SEL.
* Here you need to clear the selection of the records before of TOP_LINE
 IF TC_IC-TOP_LINE > 1.
 LOOP AT IT_IC INTO WA_IC TO TC_IC-TOP_LINE.
 CLEAR WA_IC-SEL.
 MODIFY IT_IC FROM WA_IC.
 ENDLOOP.
 ENDIF.
* Here you need to clear the selection of the records after the last one:
 LAST_INDEX = TOT_LINE_DISPLAYED + TC_IC-TOP_LINE.
 DESCRIBE TABLE IT_IC LINES SY-TABIX,
 IF SY-TABIX > LAST_INDEX.
 LOOP AT IT_IC INTO WA_IC FROM LAST_INDEX.
 CLEAR WA_IC-SEL.
 MODIFY IT_IC FROM WA_IC.
 ENDLOOP.
 ENDIF.
ENDMODULE.

How to display particular ROW of a table control in display/change mode

Hi,
Can we make particular ROW in a table control display mode or editable mode depending upon the conditions?.
Any inputs..
Rgds,
Lakshmiraj

Hi,
Yes it is possible. check the follwoing code for help.
*& Include Z101954_ASSIGNMENT1I01
*& Module VALIDATE_SALES_ORG INPUT
 text
MODULE validate_sales_org INPUT.
SELECT SINGLE zvkorg FROM vbak INTO zvbak-zvkorg
*WHERE zvbeln = zbookhdr-zvbeln.
IF sy-subrc <> 0.
 MESSAGE 'INVALID AIRLINE ID INPUT' TYPE 'I'.
 CALL SCREEN 1000.
ENDIF.
ENDMODULE. " VALIDATE_SALES_ORG INPUT
*& Module USER_COMMAND_1001 INPUT
 text
MODULE user_command_1001 INPUT.
var3 = 1.
IF sy-ucomm <> 'SAVE'.
 PERFORM material_check.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT MATERIAL NUMBER' TYPE 'I'.
 ELSE.
 SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara
 INTO CORRESPONDING FIELDS OF it_salesitems
 WHERE zmatnr = it_salesitems-zmatnr.
 SELECT SINGLE zwerks zlgort FROM zorg
 INTO CORRESPONDING FIELDS OF it_salesitems
 WHERE zvkorg = wa_salesorder-zvkorg
 AND zvtweg = wa_salesorder-zvtweg
 AND zspart = wa_salesorder-zspart.
 it_salesitems-znetwr = it_salesitems-zstprs * it_salesitems-zbrgew.
 MODIFY it_salesitems FROM it_salesitems INDEX sy-tabix.
 MOVE-CORRESPONDING it_salesitems TO temp_salesitems.
 APPEND temp_salesitems.
 REFRESH it_salesitems.
 ENDIF.
ENDIF.
LOOP AT temp_salesitems.
if it_salesitems-pick = 'X'.
 LOOP AT SCREEN.
 IF screen-name EQ 'DETAIL'.
 screen-input = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
 endif.
 endloop.
CASE sy-ucomm.
 WHEN 'SAVE'.
 PERFORM check_ship_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
 ELSE.
 PERFORM check_payer.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
 ELSE.
 PERFORM check_bill_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
 ELSE.
 wa_salesorder-zernam = sy-uname.
 MOVE-CORRESPONDING wa_salesorder TO zvbak.
 MODIFY zvbak.
 LOOP AT it_salesitems.
 it_salesitems-zvbeln = wa_salesorder-zvbeln.
 MOVE-CORRESPONDING it_salesitems TO zvbap.
 MODIFY zvbap.
 ENDLOOP.
 IF sy-subrc = 0.
 MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 IF sy-tcode = 'ZVA01'.
 CALL SCREEN '1000'.
 ELSE.
 CALL SCREEN '1003'.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 WHEN 'DETAIL'.
 CALL SCREEN '1002'.
 WHEN 'BACK'.
 IF sy-tcode = 'ZVA03'.
 CLEAR wa_salesorder.
 CALL SCREEN '1003'.
 ELSE.
 PERFORM pop_up.
 ENDIF.
 WHEN 'EXIT'.
 IF sy-tcode = 'ZVA03'.
 LEAVE PROGRAM.
 ELSE.
 PERFORM pop_up.
 ENDIF.
 WHEN 'CANCEL'.
 IF sy-tcode = 'ZVA03'.
 CLEAR wa_salesorder.
 CALL SCREEN '1003'.
 ELSE.
 PERFORM pop_up.
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
*& Module input_help_sold_to_party INPUT
 text
MODULE input_help_sold_to_party INPUT.
SELECT zkunag FROM zvbak INTO CORRESPONDING FIELDS OF TABLE
 itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'ZKUNAG'
PVALKEY = ' '
 dynpprog = sy-cprog
 dynpnr = '1000'
 dynprofield = 'ZKUNAG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
 TABLES
 value_tab = itab
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " input_help_sold_to_party INPUT
*& Form pop_up
 text
--> p1 text
<-- p2 text
FORM pop_up .
CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
 text_question = 'DO YOU WANT TO SAVE THE ORDER?'
 text_button_1 = 'YES'(001)
 icon_button_1 = ' '
 text_button_2 = 'No'(002)
 icon_button_2 = ' '
 default_button = '1'
 display_cancel_button = 'X'
 userdefined_f1_help = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IV_QUICKINFO_BUTTON_1 = ' '
IV_QUICKINFO_BUTTON_2 = ' '
IMPORTING
 answer = ans
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE ans.
 WHEN '001'.
 PERFORM check_ship_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
 ELSE.
 PERFORM check_payer.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
 ELSE.
 PERFORM check_bill_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
 ELSE.
 wa_salesorder-zernam = sy-uname.
 MOVE-CORRESPONDING wa_salesorder TO zvbak.
 MODIFY zvbak_101954.
 temp_salesitems-zvbeln = wa_salesorder-zvbeln.
 MOVE-CORRESPONDING temp_salesitems TO zvbap.
 MODIFY zvbap.
 IF sy-subrc = 0.
 MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 IF sy-ucomm = 'EXIT'.
 LEAVE PROGRAM.
 ENDIF.
 IF sy-tcode = 'ZVA01'.
 CALL SCREEN '1000'.
 ELSE.
 CALL SCREEN '1003'.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 WHEN '002'.
 IF sy-tcode = 'ZVA01'.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 CALL SCREEN '1000'.
 ELSE.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 CALL SCREEN '1003'.
 CLEAR ans.
 ENDIF.
ENDCASE.
ENDFORM. " pop_up
*& Module USER_COMMAND_1002 INPUT
 text
MODULE user_command_1002 INPUT.
IF sy-datar = 'X'.
 PERFORM material_check.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT MATERIAL' TYPE 'I'.
 ELSE.
 SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara_101954
 INTO CORRESPONDING FIELDS OF wa_salesitems
 WHERE zmatnr = wa_salesitems-zmatnr.
 wa_salesitems-znetwr = wa_salesitems-zstprs * wa_salesitems-zbrgew.
 ENDIF.
 var = 1.
ENDIF.
IF sy-ucomm = 'BACK'.
 LOOP AT temp_salesitems.
 MODIFY temp_salesitems FROM wa_salesitems .
 ENDLOOP.
 it_salesitems-pick = ' '.
 CALL SCREEN '1001'.
ENDIF.
ENDMODULE. " USER_COMMAND_1002 INPUT
*& Module USER_COMMAND_1000 INPUT
 text
MODULE user_command_1000 INPUT.
CASE sy-ucomm.
 WHEN 'NEXT'.
 SELECT * FROM zt001k_101954 INTO CORRESPONDING FIELDS OF
 temp_salesorder WHERE
 zvkorg = wa_salesorder-zvkorg AND
 zvtweg = wa_salesorder-zvtweg AND
 zspart = wa_salesorder-zspart.
 ENDSELECT.
 IF sy-subrc = 0.
 CALL SCREEN '1001'.
 ELSE.
 MESSAGE 'Invalid Data Entered' TYPE 'I'.
 CALL SCREEN '1000'.
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
*& Module USER_COMMAND_1003 INPUT
 text
MODULE user_command_1003 INPUT.
IF sy-ucomm = 'NEXT'.
 IF sy-datar = ' '.
 MESSAGE 'ENTER PURCHASE ORDER NUMBER' TYPE 'I'.
 CALL SCREEN 1000.
 IF NOT wa_salesorder-zvbeln CO '0123456789'.
 MESSAGE 'PURCHASE ORDER NUMBER IS NOT IN THE EXPECTED FORMAT' TYPE 'I'.
 CALL SCREEN '1003'.
 ENDIF.
 var3 = 0.
 CALL SCREEN '1001'.
ENDIF.
ENDMODULE. " USER_COMMAND_1003 INPUT
*& Module input_help_sales_order INPUT
 text
MODULE input_help_sales_order INPUT.
SELECT zvbeln FROM zvbak_101954 INTO CORRESPONDING FIELDS OF TABLE
itab1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'ZVBELN'
PVALKEY = ' '
 dynpprog = sy-cprog
 dynpnr = '1003'
 dynprofield = 'ZVBELN'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
 TABLES
 value_tab = itab1
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " input_help_sales_order INPUT
*& Module back_command INPUT
 text
module back_command input.
*if sy-ucomm = 'SAVE' OR 'BACK' OR 'DETAIL' OR 'EXIT' OR 'CANCEL'.
*endif.
endmodule. " back_command INPUT
Regards
Rajesh Kumar

ADF Table row background color change ???

Hi All
i got below sql view object
SELECT DEPARTMENT_ID,JOB_ID,COUNT(*) FROM EMPLOYEES GROUP BY DEPARTMENT_ID,ROLLUP(JOB_ID)
By using this i will get each department_id, jobid's and total employes count in each department
and i will get rollup for each departments ie i will get total employees.
So i want to change the back ground of the total row.
DepartmentId JobId Count1
SA_REP 1
1
10 AD_ASST 1
10 1 < this row in RED back ground in JSF page
20 MK_MAN 1
20 MK_REP 1
20 2 < this row in RED back ground in JSF page
30 PU_MAN 1
30 PU_CLERK 5
30 6< this row in RED back ground in JSF page
40 HR_REP 1
40 1< this row in RED back ground in JSF page
50 ST_MAN 5
50 SH_CLERK 20
50 ST_CLERK 20
50 45< this row in RED back ground in JSF page
any kind of help is welcome...
thanks
Ravi

Hi,
you can do this by setting the background color of the outputText component that is the cell component e.g. in a read only table. Use the inlineStyle property to set the background-color but get the string from a managed bean. For each row you get a call to the managed bean and you can use JSF value binding
FacesContext.getCurrentInstance().getApplication().createValueBinding()
to access #{row} so that you can determine the value of a row column. Based on this you return a color
Frank

Controlling Selective Color Changes in Lightroom | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of The Complete Picture, Julieanne demonstrates how to use Hue, Saturation, Luminance and the Adjustment Brush to selectively control color in Lighrroom Note: although this video was recorded in Lightroom, the same techniques are available in Adobe Camera Raw in Photoshop CS6.
http://adobe.ly/YarzUC

Julianne, I have photoshop CS5. It will not open my camera raw pictures from my new Nikon D5200 (2013) raw pictures. I? I love that you di am being told to upgrade to CS6. Do I have to? Scott Kelby suggest converting the files to DNG, but will that give full use of CS5 tools. And then I have to convert each picture at a time. Also should I get Lightroom? Isn't it enough to have CS5 which cost me tons of money.
Brooke

Issue with number of lines in Table control for an web transaction in ITS

Hi,
We have acustom web transaction ZC03 where we have used table controls. Recently a kernal patch has been installed and after that the number of lines appearing in table control has got changed. Earlier table control was coming with 5 lines and presently its coming with 3 lines. Can you please help me to fix the issue.
The code used in HTML template for table controi is given below:
`SAP_DynproLayerBegin(005,013,067,006)`
`SAP_TableControl("TC_TIME1")`
`SAP_DynproLayerEnd()`
I have tried other alternatives like `SAP_DynproTableControl("TC_TIME1")`, `D_TableControl("TC_TIME1') but did n't get any fruitful result also.
Thanks and Regards,
Ranadev

What where the precise Kernel updates? What where you on and what did you upgrade too?
Did you apply any BASIS Support Pack corrections during the Kernel upgrade?
If you applied a new BASIS support pack - check the following WIKI:
[How to check the publishing Date of an Internet Service|http://wiki.sdn.sap.com/wiki/x/OYG8BQ ]
if you need to republish - use the following WIKI:
[How to activate, publish and test ITS services in the integrated ITS?|http://wiki.sdn.sap.com/wiki/x/kmE ]
Regards,
Oisin

TABLE CONTROL LINES COLOR CHANGE

Similar Messages

Maybe you are looking for