Table control logic

I have a table control in which if some values are already displayed (exist In the internal table) then those rows need to be in display mode only and rest rows in edit mode to add more values, how to do it , I am usig below logic but it is doing for all fields as there is no check for existing values
IF ( screen-name = 'GI_PMPB_BCHID-SEL' ).
     screen-input = 1.
    ELSEIF ( screen-name = 'GI_PMPB_BCHID-PMPB'
            OR screen-name = 'GI_PMPB_BCHID-BATCHID' ).
      screen-input = 0.
    ENDIF.
Here first col is enables and rest two disabled but i want forst col in eit mode thru out and rest two disabled for filled values only

hi ,
Karan
Please check what this logic does is
i have quantity fields if in internal table it_qty-qty1 have value 0 then it will be editable else it will be in display mode
Do like this in PBO module
call module and put this logic in it .
loop at screen.
    if ( screen-name = 'IT_QTY-QTY1' and it_qty-qty1 = 0 ) or ( screen-name = 'IT_QTY-QTY2' and it_qty-qty2 = 0 )
      or ( screen-name = 'IT_QTY-QTY3' and it_qty-qty3 = 0 ) or ( screen-name = 'IT_QTY-QTY4' and it_qty-qty4 = 0 )
      or ( screen-name = 'IT_QTY-QTY5' and it_qty-qty5 = 0 ) or ( screen-name = 'IT_QTY-QTY6' and it_qty-qty6 = 0 )
      or ( screen-name = 'IT_QTY-QTY7' and it_qty-qty7 = 0 ) or ( screen-name = 'IT_QTY-QTY8' and it_qty-qty8 = 0 ).
      screen-input = 1.
      modify screen.
    endif.
endloop.
Regards
Deepak .

Similar Messages

Problem in bdc for table control for line items

Hi experts,
I am runnig a bdc for ME52.
i am just entering PR number, in the second screen i have got all the line items. I need to select these line item 10 and double click or hit enter, it takes me to screen 3, there im just checking a checkbox and saving.
Again i need to select the line item 20 and double click or hit enter. again the same process.
Again repeat for all the line items.
But my problem is it is updating everytime for only line item 10. for line item 20 and others it say "no chnge in the data".
I am pasting my code here. please check and revert me back .plz.
DATA: w_output LIKE LINE OF i_output.
REFRESH I_ITAB[].
SELECT * FROM EBAN
           INTO TABLE i_itab
           WHERE banfn in s_banfn AND
                 bsart in s_bsart AND
                 bstyp in s_bstyp AND
                 matnr in s_matnr AND
                 werks in s_werks AND
                 lfdat in s_lfdat AND
                 pstyp in s_pstyp AND
                 knttp in s_knttp AND
                 estkz in s_estkz AND
                 loekz eq ' '.
IF sy-subrc = 0.
    CLEAR: w_itab,
             i_poitab[].
    SORT i_itab by banfn.
    LOOP AT i_itab INTO w_itab where menge GT eban-bsmng.
      IF p_close = 'X' AND p_rep = 'X'.
        IF w_itab-ebakz = 'X'.
          w_itab-ebakz = ' '.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_open = 'X' AND p_rep = 'X'.
        IF w_itab-ebakz = ' '.
          w_itab-ebakz = 'X'.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_close = 'X' AND p_repw = 'X'.
        IF w_itab-ebakz = ' '.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_open = 'X' AND p_repw = 'X'.
        IF w_itab-ebakz = 'X'.
          APPEND w_itab to i_poitab.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
LOOP AT i_poitab into w_output.
    APPEND w_output to i_output.
   PERFORM CALL_BDC.
endloop.
IF p_rep = 'X'.
PERFORM CALL_BDC.
ENDIF.
ENDFORM.                    " GET_DATA
*&      Form CALL_BDC
      text
--> p1        text
<-- p2        text
FORM CALL_BDC.
DATA: seltab(5) TYPE N,
      seltab1(2) TYPE N,
      tempvar(30) TYPE N,
      cnt TYPE N.
LOOP AT i_output.
clear: seltab,
       seltab1.
seltab = i_output-bnfpo.
seltab1 = seltab+2(2).
perform bdc_dynpro      using 'SAPMM06B' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'EBAN-BANFN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'EBAN-BANFN'
                              i_output-banfn.
perform bdc_dynpro      using 'SAPMM06B' '0106'.
clear tempvar.
*cnt = 1.
concatenate 'EBAN-BNFPO(' seltab1 ')' into tempvar.
perform bdc_field       using 'BDC_CURSOR'
                             'EBAN-BNFPO(seltab1)'.
                                tempvar.
perform bdc_field       using 'BDC_OKCODE'
                              '=DETA'.
perform bdc_field       using 'RM06B-BNFPO'
                              i_output-bnfpo.
perform bdc_field       using 'RM06B-TCSELFLAG(seltab1)'
                             'X'.
perform bdc_dynpro      using 'SAPMM06B' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'EBAN-EBAKZ'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'EBAN-EBAKZ'
                              i_output-ebakz.
CALL TRANSACTION 'ME52' USING bdc_data MODE 'A'
                               MESSAGES INTO i_bdcmsg.
    COMMIT WORK AND WAIT.
ENDLOOP.
ENDFORM.                    " CALL_BDC
*&      Form bdc_dynpro
      text
     -->P_0686   text
     -->P_0687   text
FORM bdc_dynpro USING    program dynpro.
CLEAR bdc_data.
bdc_data-program = program.
bdc_data-dynpro   = dynpro.
bdc_data-dynbegin = 'X'.
APPEND bdc_data.
CLEAR bdc_data.
ENDFORM.
thanks,
N

Looks like table control logic is wrong -- do compare with below program...
only table contril area
REPORT ZPadmam
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Thanks
Seshu

How to modify data in table control

hi
i have created table control where i have displayed data into table control
logic used
screen 200
PROCESS BEFORE OUTPUT.
MODULE SELECT_RECORD.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TBC_200'
MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
LOOP AT   IT_MARA
       INTO WA_MARA
       WITH CONTROL TBC_200
       CURSOR TBC_200-CURRENT_LINE.
    MODULE TBC_200_GET_LINES.
*&SPWIZARD:   MODULE TBC_200_CHANGE_FIELD_ATTR
ENDLOOP.
MODULE STATUS_0200.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TBC_200'
LOOP AT IT_MARA.
    CHAIN.
      FIELD WA_MARA-MATNR.
      FIELD WA_MARA-ERSDA.
      FIELD WA_MARA-ERNAM.
      MODULE TBC_200_MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
    FIELD WA_MARA-MARK
      MODULE TBC_200_MARK ON REQUEST.
ENDLOOP.
MODULE TBC_200_USER_COMMAND.
*&SPWIZARD: MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
module -
MODULE SELECT_RECORD.
MODULE SELECT_RECORD OUTPUT.
SELECT MATNR ERSDA ERNAM
        FROM MARA
        INTO CORRESPONDING FIELDS OF TABLE it_mara.
ENDMODULE.                 " SELECT_RECORD OUTPUT
and
another thing
i have made field MARA-ERSDA. and FIELD WA_MARA-ERNAM editable by
input possible using layout
so
now those 2 fields contents are editable
i want to know how to edit and save the data
some body guide.
and i want to put the lock so that i can update
can tell how to implement lock.
Thanks
Edited by: viju bangalore on Jan 27, 2011 10:40 AM

Hi Viju,
In PAI do something like this
LOOP AT itab.
    MODULE mod_table_control.
ENDLOOP.
MODULE user_command_0100.
at module mod_table_control put this
MODULE mod_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
if sy-subrc ne 0.
       insert itab.
endif.
ENDMODULE.
for saving you can create at custom gui status with a save button, and at MODULE user_command_0100 save the data.

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

Module pool - table control - update ztable

hello , i doing a module pool that will have few screens , now i have one screen with a table control that fetch the data from a ztable when screen is call the table control is showing the data and is in grey and no editable i add a pf-status for change that mode i can delete the row from the table control but i don't figure out how update to the ztable when i press save , i wan't too another button for add a new row ( and remain the already in grey ) for add new entrie in the table and update the ztable
pd: sorry for my bad english
this is my code:
TOP:
PROGRAM z_pp_lote_etiquetas MESSAGE-ID zz.
TABLES:zc2p_lote_etique,
       zc2p_lider_modul.
DATA: ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
* internal table
DATA: it_zc2p_lote_etique LIKE STANDARD TABLE OF zc2p_lote_etique.
DATA: it_zc2p_lider_modul TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
DATA: it_zc2p_lider_modul_del TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
**************Workarea
DATA: wa_c2p_lote_etique TYPE zc2p_lote_etique.
DATA: wa_c2p_lider_modul TYPE zc2p_lider_modul.
DATA: wa_c2p_lider_modul_del TYPE zc2p_lider_modul.
DATA: sel.
DATA: MARK.
DATA: init.
DATA: col TYPE scxtab_column.
DATA: lines TYPE i.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
* Table Control Declartion.
CONTROLS: zc2p_lider_crtl TYPE TABLEVIEW USING SCREEN '101'.
**PROCESS BEFORE OUTPUT INCLUDE **
*& Include           Z_PP_LOTE_ETIQUETAS_O01
*& Module set_status OUTPUT
* Setting the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_MENU'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
ENDMODULE. " set_status OUTPUT screen 100
* MODULE status_0101 OUTPUT
* Setting the GUI status
MODULE status_0101 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_ME_101'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
* Data retreving
if init is INITIAL.
select * from zc2p_lider_modul into CORRESPONDING FIELDS OF TABLE it_zc2p_lider_modul.
    DESCRIBE TABLE it_zc2p_lider_modul LINES ln.
    zc2p_lider_crtl-lines = ln + 10.
    init = 'X'.
endif.
ENDMODULE.                    "status_0101 OUTPUT
module change_sdyn_conn output.
* you can change the content of current table control line via
* sdyn_conn
READ TABLE it_zc2p_lider_modul INTO zc2p_lider_modul INDEX zc2p_lider_crtl-current_line.
endmodule.                             " FILL_TABLE_CONTROL OUTPUT
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
*ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
PROCESS AFTER INPUT INCLUDE.
* MODULE USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'LIDM'.
      CALL SCREEN 101.
    WHEN 'CANC'.
      LEAVE PROGRAM.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                    "USER_COMMAND_0100 INPUT
* MODULE USER_COMMAND_0101 INPUT
MODULE user_command_0101 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'SORT'.
      DATA: fldname(100),help(100).
      READ TABLE zc2p_lider_crtl-cols INTO col WITH KEY selected = 'X'.
      SPLIT col-screen-name AT '-' INTO help fldname.
      SORT it_zc2p_lider_modul BY (fldname).
    WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
      flg = 'Y'.
    WHEN 'BACK'.
      CALL SCREEN 100.
      LEAVE SCREEN.
    WHEN 'CANCEL'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      MODIFY zc2p_lider_modul FROM it_zc2p_lider_modul.
      COMMIT WORK.
ENDCASE.
ENDMODULE.                    "USER_COMMAND_0101 INPUT
* MODULE read_table_control INPUT
MODULE read_table_control INPUT.
* Check input values
IF mark = 'X' AND save_ok = 'DELETE'.
    DELETE TABLE it_zc2p_lider_modul FROM zc2p_lider_modul.
    DESCRIBE TABLE it_zc2p_lider_modul LINES zc2p_lider_crtl-lines.
ENDIF.
ENDMODULE.                             " READ_TABLE_CONTROL INPUT
Screen Flow Logic 100
PROCESS BEFORE OUTPUT.
MODULE status_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Screen Flow Logic 101.
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
zc2p_lider_crtl.
* Dynamic screen modifications
    MODULE set_screen_fields.
    MODULE change_sdyn_conn.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0101.
LOOP AT it_zc2p_lider_modul.
    MODULE read_table_control.
ENDLOOP.
i hope somebody can help for what i missing here thanks

>
Sanjeev Kumar wrote:
> Hello Edgar,
>
> Problem seems to be there in the flow logic of 101
>
>
> PROCESS BEFORE OUTPUT.
>   MODULE status_0101.
>   LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
> zc2p_lider_crtl. " no need to have 'INTO zc2p_lider_modul' above
> * Dynamic screen modifications
>     MODULE set_screen_fields.
>     MODULE change_sdyn_conn.
>   ENDLOOP.
> *
> PROCESS AFTER INPUT.
>   MODULE user_command_0101. "this should be shifted after the following LOOP...ENDLOOP.
>
>   LOOP AT it_zc2p_lider_modul. "need to have 'WITH CONTROL zc2p_lider_crtl' here
>     MODULE read_table_control.
>   ENDLOOP.
>
>
>
> With MODULE user_command_0101 call before the LOOP calls the MODIFY statement (under case save_ok 'SAVE') first and Z-table is updated with the old values as the changes are transferred from screen into the internal table it_zc2p_lider_modul in the LOOP...ENDLOOP later.
>
> Try these changes and I hope it will work.
>
> Thanks
> Sanjeev
i do the firts advice but the second one i get syntax error :
my code :
PROCESS AFTER INPUT.
LOOP at it_zc2p_lider_modul WITH CONTROL zc2p_lider_crtl.
    MODULE read_table_control.
ENDLOOP.
   MODULE user_command_0101.
error :
In the event PROCESS AFTER INPUT, no additions are allowed with "LOOP
AT".

Internal table not getting modified from Table Control

Hi Guys,
I am developing a <b>Module Pool </b>Program where I am inserting data directly in table control of the main screen.
In the flow logic of the Table control I have written :
PROCESS BEFORE OUTPUT.
LOOP AT itab WITH CONTROL tc1 CURSOR tc1-current_line.
    MODULE read_data.
ENDLOOP.
MODULE status_0100.
PROCESS AFTER INPUT.
LOOP AT itab.
    MODULE mod_data.
ENDLOOP.
MODULE user_command_0100.
Module mod_data input.
MODIFY itab INDEX tc1-current_line.
Endmodule.
At modify, when I am debugging it's showing sy-subrc = 4 (Entry not appending in Int Table though it is there in the header line). But, if I use append itab, it's working (Problem is that while inserting 2nd record a copy of first record is also appending which I don't want).
Please let me know what's wrong in Modify statement or what is solution for inserting records of tablecontrol in internal table.
TIA,
Nitin

Hi Nitin,
use the following code wor module.
Module mod_data input.
READ ITAB INDEX TC1-CURRENT_LINE.
IF SY-SUBRC = 0.
       MODIFY itab INDEX tc1-current_line.
ELSE.
       APPEND ITAB.
ENDIF.
Endmodule.

Module Pool - Table Control - Data not getting displayed in Control

Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
        SELECTED TYPE C,
        TEXT TYPE DPR_CAUSE_T-TEXT,
      end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA:       lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
   TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
   MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.

Hi Sonali,
           When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed

Table Control Text fields problem , help plz

Hello Anand , Rich , John & All
I hav problem with Text 3 fields( type c)(either L or R aligned ) , it is not geting updated , otherwise everything else is perfectly fine(scrolling,sorting etc ....) .
Fields giving problem are
1. Status(20) type c
2. Fdat type date
3. Remark(100) type c
All numerical fields are working fine .
<u><b> My yahoo messenger-id is [email protected]</b></u>
<b>Any light on this will be awarded plz .</b>
FLOW LOGIC
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT      ITAB
      WITH    CONTROL TCL1
      CURSOR TCL1-CURRENT_LINE .
   MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE UPD_OK_COD.
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
      MODULE UPDATE_ITAB.
ENDLOOP.
MODULE UPDATE_TABLE.
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
      WA_ITAB LIKE ZSD_TABL_ORDBANK,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK_CODE LIKE SY-UCOMM,
      UPD_OK_CODE LIKE SY-UCOMM,
      ANSWER TYPE C,
      I LIKE SY-LOOPC ,
      J LIKE SY-LOOPC,
      V_LINES LIKE SY-LOOPC,
      LINE_COUNT LIKE SY-LOOPC,
      STS TYPE N,
      EMGRP LIKE MARA-EXTWG,
      QTY LIKE ZSD_TABL_ORDBANK-QTY,
      UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
      TOT LIKE ZSD_TABL_ORDBANK-TOT,
      INO LIKE VBAP-POSNR,
      COL TYPE CXTAB_COLUMN,
      COPIED_ONCE ,
      FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
     <FS_ITAB> LIKE LINE OF ITAB,
     <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_SORG FOR ZSD_TABL_ORDBANK-SORG
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
                  S_DIV FOR ZSD_TABL_ORDBANK-DIV,
                  S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
                  S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
                  S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
                  S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
                  S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
                  S_SONO   FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
   SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
         REFRESH ITAB.
         CLEAR COPIED_ONCE.
         CALL SCREEN 0200.
      ELSE.
         MESSAGE E012(ZQOTBANK) .
      ENDIF.
*&      Module SET_STATUS OUTPUT
*       text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
    IF COPIED_ONCE IS INITIAL.
      SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
        DESCRIBE TABLE ITAB LINES V_LINES.
        TCL1-LINES = V_LINES.
      ENDIF.
      COPIED_ONCE = 'X'.
      REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
   ENDIF.
      LOOP AT ITAB.
         QTY = ITAB-QTY.
         UPRICE = ITAB-UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-CGL_QTY.
         UPRICE = ITAB-CGL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-CGL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-BHEL_QTY.
         UPRICE = ITAB-BHEL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-BHEL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-ALSTOM_QTY.
         UPRICE = ITAB-ALSTOM_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-ALSTOM_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-SIEMENS_QTY.
         UPRICE = ITAB-SIEMENS_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-SIEMENS_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-TELK_QTY.
         UPRICE = ITAB-TELK_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TELK_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-OTH_QTY.
         UPRICE = ITAB-OTH_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-OTH_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         MODIFY ITAB.
      ENDLOOP.
ENDMODULE.                 " SET_STATUS OUTPUT
*&      Module SET_LINE_COUNT INPUT
*       text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE.                 " SET_LINE_COUNT INPUT
*&      Module UPD_OK_CODE INPUT
*       text
MODULE UPD_OK_COD INPUT.
IF OK_CODE = 'SAVE'.
    UPD_OK_CODE = OK_CODE.
*    CLEAR OK_CODE.
ENDIF.
ENDMODULE.                 " UPD_OK_CODE INPUT
*&      Module EXIT_COMAND INPUT
*       text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
    WHEN 'BACK'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Go BacK ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
    WHEN '%EX'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Exit ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
ENDCASE.
ENDMODULE.                 " EXIT_COMAND INPUT
*&      Module UPDATE_MOD INPUT
*       text
MODULE UPDATE_ITAB INPUT.
    MODIFY TABLE ITAB FROM ITAB.
ENDMODULE.                 " UPDATE_MOD INPUT
*&      Module SCROLL INPUT
*       text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
      TCL1-TOP_LINE = 1.
WHEN 'P-'.
      TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
      IF TCL1-TOP_LINE LE 0.
         TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'P+'.
      I = TCL1-TOP_LINE + LINE_COUNT.
      J = TCL1-LINES - LINE_COUNT + 1.
      IF J LE 0.
         J = 1.
      ENDIF.
      IF I LE J.
         TCL1-TOP_LINE = I.
      ELSE.
         TCL1-TOP_LINE = J.
      ENDIF.
WHEN 'P++'.
      TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
      IF TCL1-TOP_LINE LE 0.
          TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'SORTUP'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB ASCENDING BY (FLDNAME).
      ENDIF.
WHEN 'SORTDN'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB DESCENDING BY (FLDNAME).
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND INPUT
*&      Module TABL_UPD INPUT
*       text
MODULE UPDATE_TABLE INPUT.
   CASE UPD_OK_CODE.
   WHEN 'SAVE'.
     UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
     IF SY-SUBRC EQ 0.
         MESSAGE I002(ZQOTBANK) .
         CLEAR UPD_OK_CODE.
     ELSE.
         MESSAGE E003(ZQOTBANK) .
     ENDIF.
   ENDCASE.
ENDMODULE.                 " TABL_UPD INPUT
Thnx
moni<b></b><b></b>
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman

Hi Moni,
The problem as I had replied in your earlier post is with the MODIFY statement.
MODIFY TABLE ITAB FROM ITAB. This statement will do the modifications based on the table key. When you have character fields as editable, then some problems are to be anticipated. In such a scenario, you must update the internal table based on the <i>index</i>, rather than based on <i>key</i>.
So consider using
MODIFY ITAB FROM ITAB INDEX TCL-CURRENT_LINE.
Where TCL is the name of the Table Control. Also observe the difference in syntax here, don't use the TABLE keyword for the MODIFY statement.
Please try it out and let me know.
Regards,
Anand Mandalika.

Table control small Issues , Plz help in tracing the problem

Hello John , Rich , Anand & all
My sorting is working fine but thr is small problem
1. user has habit of pressing enter after everything,
    after entering the values in editable fields in Table control , it doesnt retain the entered values but if he presses save button immediately after entering values , it saves .
how 2 hold the values after pressing enter button
2. Now with this code , it saves the table control content but doesnt display the latest values immediately on the screen .
3. User doesnt want to press SAVE button , he wants save the Table control content by pressing ENTER button,
What is the OK_CODE value for Enter Button plz ?
Plllllzzzzz help me for god sake ASAP.
<u><b>Everyone whoever make an attempt is going to get 10 pnts.</b></u>
==========================
FLOW Logic
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
WITH CONTROL TCL1
CURSOR TCL1-CURRENT_LINE .
MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
MODULE UPDATE_MOD.
ENDLOOP.
==========================
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
      WA_ITAB LIKE ZSD_TABL_ORDBANK,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK_CODE LIKE SY-UCOMM,
      UPD_OK_CODE LIKE SY-UCOMM,
      ANSWER TYPE C,
      I LIKE SY-LOOPC ,
      J LIKE SY-LOOPC,
      V_LINES LIKE SY-LOOPC,
      LINE_COUNT LIKE SY-LOOPC,
      STS TYPE N,
      EMGRP LIKE MARA-EXTWG,
      QTY LIKE ZSD_TABL_ORDBANK-QTY,
      UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
      TOT LIKE ZSD_TABL_ORDBANK-TOT,
      INO LIKE VBAP-POSNR,
      COL TYPE CXTAB_COLUMN,
      COPIED_ONCE ,
      FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
     <FS_ITAB> LIKE LINE OF ITAB,
     <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_SORG FOR ZSD_TABL_ORDBANK-SORG
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
                  S_DIV FOR ZSD_TABL_ORDBANK-DIV,
                  S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
                  S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
                  S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
                  S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
                  S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
                  S_SONO   FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
   SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
         REFRESH ITAB.
         CLEAR COPIED_ONCE.
         CALL SCREEN 0200.
      ELSE.
         MESSAGE E012(ZQOTBANK) .
      ENDIF.
*&      Module SET_STATUS OUTPUT
      text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
    IF COPIED_ONCE IS INITIAL.
      SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
        DESCRIBE TABLE ITAB LINES V_LINES.
        TCL1-LINES = V_LINES.
      ENDIF.
      COPIED_ONCE = 'X'.
      REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
   ENDIF.
      LOOP AT ITAB.
         QTY = ITAB-QTY.
         UPRICE = ITAB-UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-CGL_QTY.
         UPRICE = ITAB-CGL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-CGL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-BHEL_QTY.
         UPRICE = ITAB-BHEL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-BHEL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-ALSTOM_QTY.
         UPRICE = ITAB-ALSTOM_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-ALSTOM_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-SIEMENS_QTY.
         UPRICE = ITAB-SIEMENS_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-SIEMENS_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-TELK_QTY.
         UPRICE = ITAB-TELK_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TELK_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-OTH_QTY.
         UPRICE = ITAB-OTH_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-OTH_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         MODIFY ITAB.
      ENDLOOP.
ENDMODULE.                 " SET_STATUS OUTPUT
*&      Module SET_LINE_COUNT INPUT
      text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE.                 " SET_LINE_COUNT INPUT
*&      Module GET_OK_CODE INPUT
      text
MODULE GET_OK_CODE INPUT.
IF OK_CODE = 'SAVE'.
     UPD_OK_CODE = OK_CODE.
ENDIF.
ENDMODULE.                 " GET_OK_CODE INPUT
*&      Module EXIT_COMAND INPUT
      text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
    WHEN 'BACK'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Go BacK ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
    WHEN '%EX'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Exit ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
ENDCASE.
ENDMODULE.                 " EXIT_COMAND INPUT
*&      Module SCROLL INPUT
      text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
      TCL1-TOP_LINE = 1.
WHEN 'P-'.
      TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
      IF TCL1-TOP_LINE LE 0.
         TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'P+'.
      I = TCL1-TOP_LINE + LINE_COUNT.
      J = TCL1-LINES - LINE_COUNT + 1.
      IF J LE 0.
         J = 1.
      ENDIF.
      IF I LE J.
         TCL1-TOP_LINE = I.
      ELSE.
         TCL1-TOP_LINE = J.
      ENDIF.
WHEN 'P++'.
      TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
      IF TCL1-TOP_LINE LE 0.
          TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'SORTUP'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB ASCENDING BY (FLDNAME).
      ENDIF.
WHEN 'SORTDN'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB DESCENDING BY (FLDNAME).
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND INPUT
*&      Module UPDATE_MOD INPUT
      text
MODULE UPDATE_MOD INPUT.
CASE UPD_OK_CODE.
WHEN 'SAVE'.
      UPDATE ZSD_TABL_ORDBANK FROM ITAB .
      STS = SY-SUBRC .
      IF STS NE 0.
           MESSAGE E003(ZQOTBANK) .
      ENDIF.
ENDCASE.
ENDMODULE.                 " UPDATE_MOD INPUT
Thnx
Moni
Message was edited by: md monirujjaman

PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT      ITAB
      WITH    CONTROL TCL1
      CURSOR TCL1-CURRENT_LINE .
   MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
      MODULE UPDATE_ITAB.
ENDLOOP.
      MODULE UPDATE_TABLE.
changed modules are ......
*&      Module UPDATE_MOD INPUT
      text
MODULE UPDATE_ITAB INPUT.
    MODIFY TABLE ITAB FROM ITAB.
ENDMODULE.                 " UPDATE_MOD INPUT
*&      Module TABL_UPD INPUT
      text
MODULE UPDATE_TABLE INPUT.
   CASE UPD_OK_CODE.
   WHEN 'SAVE'.
    UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
    IF SY-SUBRC NE 0.
         MESSAGE E003(ZQOTBANK) .
    ENDIF.
   ENDCASE.
ENDMODULE.                 " TABL_UPD INPUT
now i m able 2 get the latest edited values from user immediately i press enter button and getting saved by pressing SAVE button but further problems are, i have one dropdown button for status 1 field , and 1 date field are not getting updated .
So further help plz.

Table control Dialog program

I am Using table control wizard.once user click on button data will be populated in Table control from datatabase table
once after getting data the lines which doesnot have data are disabled but
user should be allowed to enter and Update and delete data once after clicking
ENTER Key that data should be updated in the data base table.
i am sending my program.
SCREEN DESIGN .
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TAB1'
MODULE TAB1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TAB1_CHANGE_COL_ATTR.
LOOP AT   IT_TAB3
       INTO WA_TAB3
       WITH CONTROL TAB1
       CURSOR TAB1-CURRENT_LINE.
    MODULE TAB1_GET_LINES.
*&SPWIZARD:   MODULE TAB1_CHANGE_FIELD_ATTR
ENDLOOP.
* MODULE STATUS_1002.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TAB1'
LOOP AT IT_TAB3.
    CHAIN.
      FIELD WA_TAB3-VBELN.
      FIELD WA_TAB3-POSNR.
      MODULE TAB1_MODIFY ON CHAIN-REQUEST.
    endchain.
    FIELD WA_TAB3-SP1
      MODULE TAB1_MARK ON REQUEST.
ENDLOOP.
* MODULE TAB1_BUTTON.
MODULE TAB1_BUTTONIP.
MODULE TAB1_USER_COMMAND.
*&SPWIZARD: MODULE TAB1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TAB1_CHANGE_COL_ATTR.
* MODULE USER_COMMAND_1002.
PROGRAM Z_VI_TABL2.
TYPES: BEGIN OF TY_TAB3,
       SP1(2) TYPE C,
       VBELN TYPE VBELN_VL,
       POSNR TYPE POSNR_VL,
       END OF TY_TAB3.
TYPES: BEGIN OF TY_FILL,
       OBJKY TYPE OBJKY,
       END OF TY_FILL.
DATA : IT_TAB3 TYPE STANDARD TABLE OF TY_TAB3,
       WA_TAB3 TYPE TY_TAB3,
       IT_FILL TYPE STANDARD TABLE OF TY_FILL,
       WA_FILL TYPE TY_FILL,
       G_VBELN TYPE VBELN_VL,
       G_POSNR TYPE POSNR_VL.
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TAB1' ITSELF
CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN 1002.
*&SPWIZARD: LINES OF TABLECONTROL 'TAB1'
DATA:     G_TAB1_LINES LIKE SY-LOOPC.
DATA:     OK_CODE LIKE SY-UCOMM.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TAB1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: UPDATE LINES FOR EQUIVALENT SCROLLBAR
MODULE TAB1_CHANGE_TC_ATTR OUTPUT.
DESCRIBE TABLE IT_TAB3 LINES TAB1-lines.
ENDMODULE.                    "TAB1_CHANGE_TC_ATTR OUTPUT
*&SPWIZARD: OUTPUT MODULE FOR TC 'TAB1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GET LINES OF TABLECONTROL
MODULE TAB1_GET_LINES OUTPUT.
G_TAB1_LINES = SY-LOOPC.
ENDMODULE.                    "TAB1_GET_LINES OUTPUT
*&SPWIZARD: INPUT MODULE FOR TC 'TAB1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MODIFY TABLE
MODULE TAB1_MODIFY INPUT.
* MODIFY IT_TAB3
*    FROM WA_TAB3
*    INDEX TAB1-CURRENT_LINE.
WA_TAB3-POSNR = 10.
APPEND WA_TAB3 TO IT_TAB3.
ENDMODULE.                    "TAB1_MODIFY INPUT
*&SPWIZARD: INPUT MODUL FOR TC 'TAB1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MARK TABLE
MODULE TAB1_MARK INPUT.
DATA: g_TAB1_wa2 like line of IT_TAB3.
if TAB1-line_sel_mode = 1
and WA_TAB3-SP1 = 'X'.
    loop at IT_TAB3 into g_TAB1_wa2
      where SP1 = 'X'.
      g_TAB1_wa2-SP1 = ''.
      modify IT_TAB3
        from g_TAB1_wa2
        transporting SP1.
    endloop.
endif.
MODIFY IT_TAB3
    FROM WA_TAB3
    INDEX TAB1-CURRENT_LINE.
*    TRANSPORTING SP1.
ENDMODULE.                    "TAB1_MARK INPUT
*&SPWIZARD: INPUT MODULE FOR TC 'TAB1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: PROCESS USER COMMAND
MODULE TAB1_USER_COMMAND INPUT.
OK_CODE = SY-UCOMM.
PERFORM USER_OK_TC USING    'TAB1'
                              'IT_TAB3'
                              'SP1'
                     CHANGING OK_CODE.
SY-UCOMM = OK_CODE.
ENDMODULE.                    "TAB1_USER_COMMAND INPUT
*   INCLUDE TABLECONTROL_FORMS                                         *
*&      Form USER_OK_TC                                               *
FORM USER_OK_TC USING    P_TC_NAME TYPE DYNFNAM
                         P_TABLE_NAME
                         P_MARK_NAME
                CHANGING P_OK      LIKE SY-UCOMM.
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA: L_OK              TYPE SY-UCOMM,
        L_OFFSET          TYPE I.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
*&SPWIZARD: Table control specific operations                          *
*&SPWIZARD: evaluate TC name and operations                            *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC <> 0.
    EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations                 *
CASE L_OK.
    WHEN 'INSR'.                      "insert row
      PERFORM FCODE_INSERT_ROW USING    P_TC_NAME
                                        P_TABLE_NAME.
      CLEAR P_OK.
    WHEN 'DELE'.                      "delete row
      PERFORM FCODE_DELETE_ROW USING    P_TC_NAME
                                        P_TABLE_NAME
                                        P_MARK_NAME.
      CLEAR P_OK.
    WHEN 'P--' OR                     "top of list
         'P-' OR                     "previous page
         'P+' OR                     "next page
         'P++'.                       "bottom of list
      PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
                                            L_OK.
      CLEAR P_OK.
*     WHEN 'L--'.                       "total left
*       PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
*     WHEN 'L-'.                        "column left
*       PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
*     WHEN 'R+'.                        "column right
*       PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
*     WHEN 'R++'.                       "total right
*       PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
    WHEN 'MARK'.                      "mark all filled lines
      PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
                                        P_TABLE_NAME
                                        P_MARK_NAME   .
      CLEAR P_OK.
    WHEN 'DMRK'.                      "demark all filled lines
      PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
                                          P_TABLE_NAME
                                          P_MARK_NAME .
      CLEAR P_OK.
*     WHEN 'SASCEND'   OR
*          'SDESCEND'.                  "sort column
*       PERFORM FCODE_SORT_TC USING P_TC_NAME
*                                   l_ok.
ENDCASE.
ENDFORM.                              " USER_OK_TC
*&      Form FCODE_INSERT_ROW                                         *
FORM fcode_insert_row
              USING    P_TC_NAME           TYPE DYNFNAM
                       P_TABLE_NAME             .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA L_LINES_NAME       LIKE FELD-NAME.
DATA L_SELLINE          LIKE SY-STEPL.
DATA L_LASTLINE         TYPE I.
DATA L_LINE             TYPE I.
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>                 TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE>              TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES>              TYPE I.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: get looplines of TableControl                              *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line                                           *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0.                   " append line to table
    L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line                                               *
    IF L_SELLINE > <LINES>.
      <TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
    ELSE.
      <TC>-TOP_LINE = 1.
    ENDIF.
ELSE.                               " insert line into table
    L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
    L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line                                        *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line                                        *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor                                                 *
SET CURSOR LINE L_LINE.
ENDFORM.                              " FCODE_INSERT_ROW
*&      Form FCODE_DELETE_ROW                                         *
FORM fcode_delete_row
              USING    P_TC_NAME           TYPE DYNFNAM
                       P_TABLE_NAME
                       P_MARK_NAME   .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE cxtab_control.
FIELD-SYMBOLS <TABLE>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: delete marked lines                                        *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
    IF <MARK_FIELD> = 'X'.
      DELETE <TABLE> INDEX SYST-TABIX.
      IF SY-SUBRC = 0.
        <TC>-LINES = <TC>-LINES - 1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.                              " FCODE_DELETE_ROW
*&      Form COMPUTE_SCROLLING_IN_TC
*       text
*      -->P_TC_NAME name of tablecontrol
*      -->P_OK       ok code
FORM COMPUTE_SCROLLING_IN_TC USING    P_TC_NAME
                                      P_OK.
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA L_TC_NEW_TOP_LINE     TYPE I.
DATA L_TC_NAME             LIKE FELD-NAME.
DATA L_TC_LINES_NAME       LIKE FELD-NAME.
DATA L_TC_FIELD_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE cxtab_control.
FIELD-SYMBOLS <LINES>      TYPE I.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl                              *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled?                                         *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ...                                                   *
    L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ...                                                    *
    CALL FUNCTION 'SCROLLING_IN_TABLE'
         EXPORTING
              ENTRY_ACT             = <TC>-TOP_LINE
              ENTRY_FROM            = 1
              ENTRY_TO              = <TC>-LINES
              LAST_PAGE_FULL        = 'X'
              LOOPS                 = <LINES>
              OK_CODE               = P_OK
              OVERLAPPING           = 'X'
         IMPORTING
              ENTRY_NEW             = L_TC_NEW_TOP_LINE
         EXCEPTIONS
*              NO_ENTRY_OR_PAGE_ACT = 01
*              NO_ENTRY_TO           = 02
*              NO_OK_CODE_OR_PAGE_GO = 03
              OTHERS                = 0.
ENDIF.
*&SPWIZARD: get actual tc and column                                   *
GET CURSOR FIELD L_TC_FIELD_NAME
             AREA L_TC_NAME.
IF SYST-SUBRC = 0.
    IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column                                           *
      SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
    ENDIF.
ENDIF.
*&SPWIZARD: set the new top line                                       *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM.                              " COMPUTE_SCROLLING_IN_TC
*&      Form FCODE_TC_MARK_LINES
*       marks all TableControl lines
*      -->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
                               P_TABLE_NAME
                               P_MARK_NAME.
*&SPWIZARD: EGIN OF LOCAL DATA-----------------------------------------*
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE cxtab_control.
FIELD-SYMBOLS <TABLE>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: mark all filled lines                                      *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
    <MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM.                                          "fcode_tc_mark_lines
*&      Form FCODE_TC_DEMARK_LINES
*       demarks all TableControl lines
*      -->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
                                 P_TABLE_NAME
                                 P_MARK_NAME .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE cxtab_control.
FIELD-SYMBOLS <TABLE>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: demark all filled lines                                    *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
    <MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM.                                          "fcode_tc_mark_lines
*&      Module TAB1_BUTTON INPUT
*       text
MODULE TAB1_BUTTONIP.
CASE SY-UCOMM.
    WHEN 'DELI'.
      REFRESH IT_TAB3.
      SELECT OBJKY
             INTO TABLE IT_FILL
             FROM DRAD
             WHERE DOKNR = 'T-F122' AND
                   DOKOB = 'LIPS'.
      IF SY-SUBRC = 0.
        LOOP AT IT_FILL INTO WA_FILL.
          wa_tab3-vbeln = WA_FILL-OBJKY+0(10).
          wa_tab3-posnr = WA_FILL-OBJKY+10(4).
          APPEND wa_tab3 TO IT_TAB3.
        ENDLOOP.
        DELETE ADJACENT DUPLICATES FROM IT_TAB3.
     ENDIF.
ENDCASE.

hi Sonarali,
this FM is of no use to you.
in your PAI you have to loop at the table control table and put a method here you read the lines and save it.
if you use wizard to create a table control it will automatically give the code to you...

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

How to perform 'block selection' in table control?

Hi,
I'm looking for an easy way to implement block selection in a table control (i.e. select one line, hit 'block select' button, select a second line, hit 'block select' button again, and all lines between first and last are selected).
I'm currently with a customer who is on 4.0b, so I can't use the wizard, it didn't exist back then.
I hope someone knows
regards,
rs

Rob,
I generated a quick screen with wizard doing the multiple select. This is the code chucks it generated
in _TOP first part is my definition of the table to be displayed and the one column on it.
TABLES:   zsd_act_salespr.
DATA:
BEGIN OF wk_rec.
        INCLUDE STRUCTURE zsd_act_salespr.
DATA:
    sel    TYPE c,
END OF wk_rec,
it_wk   LIKE STANDARD TABLE OF wk_rec.
   controls: TBLCLT_MAIN type tableview using screen 0100.   " Table Control on screen
in I01
*&spwizard: input modul for tc 'TBLCLT_MAIN'. do not change this line!
*&spwizard: mark table
module TBLCLT_MAIN_mark input.
data: g_TBLCLT_MAIN_wa2 like line of IT_WK.
if TBLCLT_MAIN-line_sel_mode = 1.
     loop at IT_WK into g_TBLCLT_MAIN_wa2
       where SEL = 'X'.
       g_TBLCLT_MAIN_wa2-SEL = ''.
       modify IT_WK
         from g_TBLCLT_MAIN_wa2
         transporting SEL.
     endloop.
endif.
modify IT_WK
    from WK_REC
    index TBLCLT_MAIN-current_line
    transporting SEL.
endmodule.
in the screen workflow
PROCESS BEFORE OUTPUT.
*&spwizard: pbo flow logic for tablecontrol 'TBLCLT_MAIN'
module TBLCLT_MAIN_change_tc_attr.
*&spwizard: module TBLCLT_MAIN_change_col_attr.
loop at   IT_WK
       into WK_REC
       with control TBLCLT_MAIN
       cursor TBLCLT_MAIN-current_line.
*&spwizard:   module TBLCLT_MAIN_change_field_attr
endloop.
PROCESS AFTER INPUT.
*&spwizard: pai flow logic for tablecontrol 'TBLCLT_MAIN'
loop at IT_WK.
    chain.
      field WK_REC-SPNUM.
    endchain.
    field WK_REC-SEL
      module TBLCLT_MAIN_mark on request.
endloop.
*&spwizard: module TBLCLT_MAIN_change_tc_attr.
*&spwizard: module TBLCLT_MAIN_change_col_attr.
in the O01
*&spwizard: output module for tc 'TBLCLT_MAIN'. do not change this line!
*&spwizard: update lines for equivalent scrollbar
module TBLCLT_MAIN_change_tc_attr output.
describe table IT_WK lines TBLCLT_MAIN-lines.
endmodule.
in the F01 nothing
Edited by: Paul Chapman on Apr 24, 2008 4:56 PM

How to implement F4 help in table control

Hi all,
I am working on a table control in a module pool program. I have three fields in table control , material no. , material description and quantity. my requirement is , in table control , i need to provide the F4 help for material no. and material description, in a way, if i select material no. using F4, the corresponding material description field would be entered automatically in the table control field.
Pls suggest me on this , if possible pls give me code or logic to do this.
Thanks
Saravan
Moderator message: please don't post the identical question again after the first attempt was locked for good reasons. Search for available information before asking.
Edited by: Thomas Zloch on Mar 3, 2011 11:54 AM

Hi Saravana,
Please search in SCN before posting. You will find many threads related to this question. The basic logic is you have to get the selected row of table control using DYNP_GET_STEPL function in your POV. Then using function DYNP_VALUES_READ read the material and create the description to be displayed. You have use function F4IF_INT_TABLE_VALUE_REQUEST to display search help.

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

Table control View in Maintenance order Services tab

Hi Experts,
I am trying to change the table control fields of the services tab of the maintenance order , when we use PM03 control key to generate services PR.
I try to remove some check box which are earlier defined as invisible to make it visible. However after saving the system variant system doesnt take the changes. It is coming back to the original .
Here are couple of fields I would like to change the setting. As of now I am trying to change the below mentioned field to visible . Presently it is in invisible mode.
Fields
Formula::ESLL-FORMELNR,
Form values: ESLL-FRMVAL1 to ESLL-FRMVAL5 and
User field3: ESLL-USERF1_TXT
program name SAPLMLSP
Control TC_VIEW
I am following the below. Kindly let me know whether I am following the right step.
1) Click on tbale setting
2) CLick on administrator
3) Select the field and do the necessary change to make visible or invisible.
4)Activate
5)Close
6) save.
RG
Vinod
Edited by: vnodpm on Feb 6, 2012 7:07 PM

Hi,
The IMG customizing will have greater priority than the screen table controls (also specific program logic can supersede the table controls). Check the customizing for service screen at following path:
SPRO - Materials Management - External Services Management - Define Screen Layout
-Paul

Table control logic

Similar Messages

Maybe you are looking for