Table exist in a datasource or not...

Hi Gurus,
I`d like to ask what the best solution is for getting know whether a table (or view) is extracted by a datasource or not?
Thanks

Hi ,
1.All data source extractors basically work on tables only .However some extractors are based on table or view directly.
2.To check this you can go to R/3 TCODE RSA2 and here can give datasource name .
3.In Extraction tab you will find Extraction Method .
V is for transperent table or DB view .
Here you will find the details about all extractors extraction method.
Hope this will be helpful.
Regards,
Jaya Tiwari

Similar Messages

SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

Hi all,
Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back:
A] Site Status > Reporting services point:
SMS_SITE_SYSTEM_STATUS_SUMMERIZER
Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
C] Here's the first chunk of info which appears in the srsrp.log file:
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
This is a SRS Reporting Point Role as SRSRP registry key exists.
Waiting for changes for 0 minutes
Timed Out...
Set configuration
Check state
Check server health.
Successfully created srsserver SMS_
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [xxx\SCCM2012Server]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
After this point i simply get the following info messages looping endlessly:
Set configuration
Check state
Check server health.
Successfully created srsserver
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [XX\SCCM2012Server]
[1] [0]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

Hi guys, cheers for the swift response.
Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
the walkthrough you posted.
Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
"Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
AUTHORITY\SYSTEM account in SRS perhaps?

DataSource ***** does not exist in source system ***** of version A

dear masters,
i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
pls help me how to overcome this problem.... where i m missing which setttings...
regards,
vicky

Hi Vicky,
Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
Now Change and activate the data source again.
Both the status and version should be activated green.
Also you can use the check button to check the DS.
Thanks,
Naween

Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Select from 1 table only if a value does not exist

Hello all,
I'm having problems devising a single select statement to accomplish a single return value. I have tried variations of DECODE and COALESCE, but it's escaping me.
I have two tables that are as follows:
NAME
ID, FULLNAME
1, Senior
2, Junior
3, Mister
4, Senor
5, Miss
ABBREVIATION
ID, ABBREV
1, Sr
2, Jr
3, Mr
5, Ms
What I would like to do is select from the NAME table only if the value does not exist in the ABBREVIATION table.
Ideally if I were to do something such as:
SELECT * FROM .... WHERE (ID=1 or ID=2 or ID=4) ....
I would receive the following output:
1, Sr
2, Jr
4, Senor
Thanks for reading!

You want an outer join.
SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev)
FROM name n,
abbreviation a
WHERE n.ID = a.ID(+)
AND ....Something like that.
Full example:
with n as (
select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL
select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL
select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL
select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL
select 5 as ID, 'Miss' as FULLNAME from dual),
a as (
select 1 as ID, 'Sr' as ABBREV from dual UNION ALL
select 2 as ID, 'Jr' as ABBREV from dual UNION ALL
select 3 as ID, 'Mr' as ABBREV from dual UNION ALL
select 5 as ID, 'Ms' as ABBREV from dual)
select decode(a.abbrev, NULL, n.fullname, a.abbrev)
from a, n
where n.id = a.id(+)
order by n.id;
ID                     DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV)
1                      Sr
2                      Jr
3                      Mr
4                      Senor
5                      Ms
5 rows selectedEdited by: tk-7381344 on Nov 17, 2008 1:31 PM

In MVT 545 Check table XEKPO: entry 00000 0000   does not exist

Hello
While using the mvt type 545 with MB1C (Included in mvt)
I am getting the following error what could be the possible reason
Check table XEKPO: entry 00000 0000   does not exist
    Message no. M7001
Diagnosis
    In table XEKPO the entry 00000 0000   is missing.
Regards
Niti Narayan Chaturvedi

This is a authomatic mvt, But I am using a manual route to excecute, is this causing problem
Where is the check for the automatic mvt
Niti Narayan

How to check one table exist or not in SAP

Hi, Gurus:
How to check one table exist or not in the SAP.
Thanks,

Hi,
Query the table DD02L..
Select single * from DD02L where tabname = 'Your table name'
AND TABCLASS = 'TRANSP'. " For transparent tables.
Thanks
Naren

How can I check whether or not an database table exists?

Hi,
I am new to ABAP programming. And now I want to write an function that check whether an table exists in the dictionary.
It request the table name was given by the user input. So I have to check it dynamically.
Please give me some guide if you know about that.
Thanks.

Hi,
All the table names exist in DD02l table.
Fetch data from DD02l table by passing selectin screen parameter .
REPORT ysdn_new .
PARAMETERS: p_tab LIKE dd02l-tabname.
DATA: v_tab LIKE p_tab.
SELECT SINGLE tabname INTO v_tab FROM dd02l WHERE tabname = p_tab.
WRITE v_tab.
If ypu want to fetch from TADIR table only means you have to pass selection screen parameter in place of obj_name and TABL for OBJECT field.
SELECT SINGLE tabname INTO v_tab
FROM TADIR
WHERE obj_name = p_tab
AND object = 'TABL'.
This is other way of getting table name by passing selection screen parameter
this will work.
Please reward points if helpful...
Regds
Sivaparvathi

Shared Datasource Is Not Valid Error

Using Reporting Services (SQL Server 2008 R2), I have a VS SSRS project with 23 reports, all running off the same Shared Data Source. They all execute in VS. I have deployed the datasource, datasets & reports to server. From the Report
Manager, I can execute all reports except 4, which have the same error:
The report server cannot process the report or shared dataset. The shared data source '22d600c2-a3d5-4178-8a39-d05361607ebd' for the report server or SharePoint site is not valid. Browse to the server or site and select a shared data source. (rsInvalidDataSourceReference)
I have tried the following, without success:
1)verified that the datasource exists in the Data Sources folder, and is Enabled
2) Checked and reset the Shared Datasource to point to the deployed datasource in the Data Sources folder
3) Recreated & redeployed the datasource
4) Deleted the 4 reports on the server and re-deployed
5) Deleted the reports, used Upload instead of Deploy, then set the Shared Datasource to point to the one on the server
6) Verified that the Link column in ReportServer.DataSource is NOT NULL. Actually have the same Link as the other 19 reports. Verified that the GUID in the LinkID exists in Catalog table and is the id for the Datasource.
No matter what I have tried, for some reason, the GUID in these failing reports appear to get set to '22d600c2-a3d5-4178-8a39-d05361607ebd', which does not exist in Catalog table. The other reports never fail, these reports never execute. Anyone
have any ideas?
Victor

As I recall, I went into the Report server db and updated the Catalog table. Open the table and you'll find your reports listed with a link to their datasource (in the DataSource table). I found the 4 reports that failed had a different value
in the LinkID column than the reports that executed, even though they use the same shared datasource.
So I copied the good LinkID value (a GUID) into the 4 reports that failed, and then they ran fine. For some unknown reason, there was an invalid value stuck in the LinkID column which pointed to a datasource that really did not exist.
Go figure.
Victor
Victor Kushdilian

Transfer rules of export datasource will not activate

We are on BW 3.5
We have an export datasource from an ODS that existed that we are regenerating and ultimately pointing to a different cube. When the transport was created in development, the infosource, transfer rules, transfer structure and communication structure were all on the transport.
When it got to test, the transport got a '12'. The transfer rules said active, but the datasource was not. Runnint RS_TRANSTRU_ACTIVATE_ALL yielded (and still does) the error: "No versioning for PSA table" Error Message: RSAR023
We tried regenerating the export datasource. That took the transfer rule reference out of table RSISOSMAP and made RS_TRANSTRU_ACTIVATE_ALL fail because it couldn't find the transfer rules at all.
We have tried reimporting.
We have tried replicating.
We have tried regenerating.
We have tried sending the datasource replica and datasource.
Nothing is working and it's holding up a large effort underway.
Any thoughts???
Note - we had another ODS with the same situation and we did the same thing and it is active. The only difference is that for the problem export datasource the underlyingn ODS itself was also transported.

Hi,
First transport the ODS and Replica of the datasource to quality. Check whether the ODs and replica 8* object is active.
Replicate them and regenerate them.
Then transport the transfer rules and update rules in the next transport and try activating them.
Thanks,
Arun.

OBIEE 11g - No fact table exists at the requested level of detail

My dimesion tables are snow-flake.
Table1 has Key, ProductName, ProductSize, Table2Key
Table2 has Key, ProductDepartment, Table3Key
Table3 has Key, ProductDivision
I have created 2 hierarchies (in same dimension Product). Note: ProductSize is in Table1.
ProductDivision > ProductDepartment > ProductName (shared level)
ProductSize > ProductName (shared level)
There are 2 fact tables
Fact1 is at ProductName level
Fact2 is at ProductDepartment level
When I create a request with columns as ProductSize and some measure; and filter it on ProductDepartment. The request fails with error "No fact table exists at the requested level of detail", but the request can ideally be answered using fact with ProductName level.
I have properly defined logical level keys in the hierarchies and logical level in the LTS (content tab)
Can anyone point me what I am doing wrong here?

Since both fact tables are at same granular level I would suggest to map each other (Signon_A maping Signon_B) in BMM layer logical fact @source.
Considering them as Fact and with fact extension.
BTW: Did you try by setting implicit fact at subject area properties?
Edited by: Srini VEERAVALLI on Feb 1, 2013 9:04 AM

Enhanced Datasource fields not getting displayed in Transformation

Hi,
Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
Eg I have done mapping of 6 fields in transformation from datasource to DSO
Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
I am deleting the existing transformation.Is this the only solution?
Kindly suggest your answers.
Thanks,
Sonu.

HI,
Deleting is not solution as it is common scnerio.
Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
Thanks
Ajeet

No fact table exists at the requested level of detail

We have two fact tables F1,F2 and D1, D2, D3, D4, D5 dimensions.
They are connected line this.
F1 to D1, D2, D3 and self dimension D_of_F1
F2 to D2, D3 and self dimension D_of_F2
Means D2 and D3 are common dimensions between two facts.
D_of_F1
         |
         |
D1--F1--D2
         |      |
         |      |
        D3   |
        |       |
        |       |
        |-F2-|
        |
        |
        |
   D_of_F2
Hierarchies
H1 for D1
H2 for D2
H3 for D3
H_of_F1 for D_of_F1
H_of_F2 for D_of_F2
and pinned LTS of F1 --> H1 detail, H2 Detail,H3 Detail, H_of_F1 Detail
and pinned LTS of F2 --> H2 Detail,H3 Detail, H_of_F2 Detail
We are selecting these columns
D1.C1, D1.C2, D2.C1, D2.C2,D3.C1 and report works perfactly.
But when I add D_of_F2.C1 then report gives this error
Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail
Please help me to solve this error....
I m new in OBIEE concepts so not able to trubleshoot...
Thank you.

i'm try to do an analysis between two tables (that have a relatinship), we had inclued first the FACTURA.FACTURA_COD, then columns from COBRANCAS and it work's. When we inclued the FACTURA.COMISSIONISTA_ID it return the fowlling error :check the level set in content tab in fact table.it can happen that FACTURA.COMISSIONISTA_ID is at a lower level than specified in fact table.
Regards,
Sandeep

No Fact table exists at this detail level error

Hi All,
I am trying to develop an RPD and was trying to use a simple example of joining two fact tables in OBIEE through confirmed dimension.
This is my example:
Fact A: Student ID (FK)......Measure1, Measure2...
Fact B: Student ID (FK)........Measure A, Measure B
DIM 1: Student ID (PK),.....
I would like to give the users the option of joining Fact A and Fact B through Dim 1( Which is a conforming Dimension)
I tried with out level based hierarchy and got NO Fact exists at this level of detail.
Then I tried creating the level based hierarchy on Dim 1 and selected the detail level for the fact table and I am still getting the error message.
Am i doing some thing wrong here ? Or Am i missing any important setting ?
Is there a way to check whether the dimension is a conforming dimension or not in OBIEE.
Your help is much appreciated.
Thanks
Venu

Can we use between operator in physical join. We did that, its successfully checking in, but when we re-open the join, its show in RED color.
So, got doubt, can we use between?When you checkout the rpd object in online mode it would display in red, this is not an error.
"No fact table exists at the requested level of detail"; what does this error meanThis error usually happens if you have not mapped the content level correctly in the logical table source.
Rgds,
Dpka

No fact table exists at the required level of detail

Hi All,
I am getting the below error in report level(11.1.1.6.4).
No fact table exists at the required level of detail.
Thanks & Regards,
Chandra

Hi Chandra,
One of the possibility for this error can be:
if you have 2 sets of dimension and fact say (D1 & F1) , (D2 & F2) and these are 2 sets are not connected to each other. In report criteria if you have columns from all the tables. Then the result will be.'No fact table exists at the required level of detail' error.
Regards,
Arjun.

Table exist in a datasource or not...

Similar Messages

Maybe you are looking for