In MVT 545 Check table XEKPO: entry 00000 0000 does not exist

Hello
While using the mvt type 545 with MB1C (Included in mvt)
I am getting the following error what could be the possible reason
Check table XEKPO: entry 00000 0000   does not exist
    Message no. M7001
Diagnosis
    In table XEKPO the entry 00000 0000   is missing.
Regards
Niti Narayan Chaturvedi

This is a authomatic mvt, But I am using a manual route to excecute, is this causing problem
Where is the check for the automatic mvt
Niti Narayan

Similar Messages

Entry SE01 1890 does not exists in T005G(Table)

Hi,
We are getting Bdoc error "Entry SE01 1890 does not exists in T005G(Table)" in CRM system.We are using CRM 7 and ECC 6.
Please help me in resolving this issue.
Thanks,
Rahul

Hi,
Thanks for the reply.
We are getting this error in BDOC monitoring.Similarly we haev more errors related to same error like" Entry SE01 1880 does not exists in T005G(Table)".
.Actually when i check this table city code 1880 is mentioned under region 18 in the country key SE.
Please help me

Entry EN 40 does not exist - check your entry

Dear Friends
I'm facing a Issue in MSS where when manager is trying to view the employee Trip details in UWL. I'm getting a error as "Entry EN 40 Does not Exist - Check your Entry" I've checked the Table V_T702X & there I can view the Trip Types which I've created for Trip Provision variant 40.
V_T702X:
Kindly let me know what else I'm missing as this is very urgent & it need to be resolved ASAP.
Cheers
Pradyp

Hi Ankur
Thanks for the quick reply,
I've checked the Table PTRV_HEAD, and below is the data I've found in that.
Kindly let me know what else need to be checked.
Cheers
Pradyp

Select from 1 table only if a value does not exist

Hello all,
I'm having problems devising a single select statement to accomplish a single return value. I have tried variations of DECODE and COALESCE, but it's escaping me.
I have two tables that are as follows:
NAME
ID, FULLNAME
1, Senior
2, Junior
3, Mister
4, Senor
5, Miss
ABBREVIATION
ID, ABBREV
1, Sr
2, Jr
3, Mr
5, Ms
What I would like to do is select from the NAME table only if the value does not exist in the ABBREVIATION table.
Ideally if I were to do something such as:
SELECT * FROM .... WHERE (ID=1 or ID=2 or ID=4) ....
I would receive the following output:
1, Sr
2, Jr
4, Senor
Thanks for reading!

You want an outer join.
SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev)
FROM name n,
abbreviation a
WHERE n.ID = a.ID(+)
AND ....Something like that.
Full example:
with n as (
select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL
select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL
select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL
select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL
select 5 as ID, 'Miss' as FULLNAME from dual),
a as (
select 1 as ID, 'Sr' as ABBREV from dual UNION ALL
select 2 as ID, 'Jr' as ABBREV from dual UNION ALL
select 3 as ID, 'Mr' as ABBREV from dual UNION ALL
select 5 as ID, 'Ms' as ABBREV from dual)
select decode(a.abbrev, NULL, n.fullname, a.abbrev)
from a, n
where n.id = a.id(+)
order by n.id;
ID                     DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV)
1                      Sr
2                      Jr
3                      Mr
4                      Senor
5                      Ms
5 rows selectedEdited by: tk-7381344 on Nov 17, 2008 1:31 PM

Table or view "DMSYS.MINING_DATA_BUILD_V does not exist

Hi all
I am trying to run the ABNDemo.java. Before compiling the code I made the following changes. I am using Oracle 10g, 10.1.0.2.
DB URL =jdbc:oracle:thin:@localhost:1521:orcl
Username = system
Password=sdsfdvd
DATA_SCHEMA_NAME=DMSYS
I compiled it successfully but when I am running it I am getting the following error.
C:\oracle\product\10.1.0\db_1\dm\demo\sample\java>javac ABNDemo.java
C:\oracle\product\10.1.0\db_1\dm\demo\sample\java>java ABNDemo
oracle.dmt.odm.InvalidArgumentException: Table or view "DMSYS.MINING_DATA_BUILD_
V" does not exist.
at oracle.dmt.odm.data.LogicalDataSpecification.formLDSFrom2DDBTable(Log
icalDataSpecification.java:466)
at oracle.dmt.odm.data.LogicalDataSpecification.create(LogicalDataSpecif
ication.java:647)
at oracle.dmt.odm.settings.function.MiningFunctionSettings.prepareMFS(Mi
ningFunctionSettings.java:2229)
at oracle.dmt.odm.settings.function.ClassificationFunctionSettings.creat
e(ClassificationFunctionSettings.java:460)
at ABNDemo.buildModel(ABNDemo.java:93)
at ABNDemo.main(ABNDemo.java:55)
Thanx
vijai

'user schema' refers to a normal database user account, e.g. scott
For more details as how to execute 10.1 Java demo programs, please check the README.txt file which is located at:
$ORACLE_HOME/dm/demo/sample/java/README.txt
Xiafang

Table compare deleting rows which does not exist in target table

Hi Gurus,
I am struggling with an issue in Data Services.
I have a job which uses Table Compare, then History Preserving and then a Key Generation transforms.
There is every possibility that data would get deleted from the source table.
Now, I want to delete them from the target table also.
I tried Detect deleted rows but it is not working.
Could some one please help me on this issue.
Thanks,
Raviteja.

Doesn't history preserving really only operate on "Update" rows. Wouldn't it only process the deletes if you turned the "Preserve Delete row(s) as update row(s)" on?
I would think if you turned on Detect Delete rows in the Table compare and did not turn this on in the history preserving it would retain those rows as delete rows and effectively remove them from the target.
Preserve delete row(s) as update row(s)
Converts DELETE rows to UPDATE rows in the target warehouse and, if you previously set effective date values (Valid from and Valid to), sets the Valid To value to the execution date. Use this option to maintain slowly changing dimensions by feeding a complete data set first through the Table Comparison transform with its Detect deleted row(s) from comparison table
option selected.

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

Database Configuration: Table space does not exist error

Hi all,
while running Database configuration wizard in Siebel 8.0 installation process I receive the following error:
C103: The table\\index space siebelts entered does not exist in your database.Please ensure you entered the correct table\\
index space.
I have verified the following things:
1) Verified in database that, SIEBELTS tablespace is created but not online.
2) grantusr.sql is executed successfully.SADMIN user and SIEBEL table owner accounts are created.
3) SIEBELTS tablespace is assigned as default tablespace for SADMIN and LDAPUSER. There were no problems running the grantusr.sql.
How can it be that the Wizard shows up this error when the grantusr.sql didn't show it?. The problem is the SIEBELTS. The wizard doesn't find it, but it does find the SIEBELINDEXTS tablespace. Checking the last one, it appears online.

this is what I checked as DBA:
SQL> select * from dba_tablespaces where tablespace_name='SIEBELTS';
TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
SIEBELTS 8192 65536 1
2147483645 65536 ONLINE PERMANENT LOGGING NO LOCAL
SYSTEM NO AUTO DISABLED NOT APPLY NO
SQL> select * from dba_tablespaces where tablespace_name='SIEBELINDEXTS';
TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
SIEBELINDEXTS 8192 65536 1
2147483645 65536 ONLINE PERMANENT LOGGING NO LOCAL
SYSTEM NO AUTO DISABLED NOT APPLY NO

Check for Rentals on Apple TV does not work

I have rented many movies in the past using Apple TV. I have not had a problem until now, right after I just updated my Apple TV software to the latest software v6.0 (6646.65).
Last night (9/28) I rented World War Z. Roughly 20 minutes into the movie, I stopped the move by hitting the menu button. This exited me from the movie and back to the movies rentals screen. I then rented another movie only a few minutes after exiting the first. I had no problem renting the second movie as I did not exit the movie once the streaming started.
A few hours later I went back to watch the move by selecting the movie. The rental option was still availabe. By selecting to rent the movie again and then selecting "Rent and watch now", the system told me I had already rented the movie and I should go to Settings->Downloads->Check for Downloads. This options does NOT exist in the settings menu; however, I found a similar option under iTunes Store->Check for Rentals.
This "Check for Rentals" option does absolutely nothing - or it doesn't show anything if it is doing something behind the scenes. It just shows the spinning lines. I waited all night for something to happen. I restarted my router and modem to make sure there was nothing wrong with networking. Again, I had just watched another movie all the way through with no problems. I sent Apple Support an email with my issue and they refunded my $4.99 for the movie rental.
So, tonight (9/29), I still wanted to watch the movie and I wanted to see if it would work. I went to the movie, selected to rent the movie and it gave me an optionsaying that I had already rented the movie and asking me if I wanted to rent it again. I selected to rent it again. I was able to watch the movie all the way through with no problem.
I ended the movie during the credits by hitting the menu button. I immediately went back to the movie to see if I could continue the movie since I should be able to watch this movie in the next 24 hours. The same situation happened again. I was told I could not rent the movie again, but to go to Settings->Download->Check for downloads. The "Check for Rentals" is doing the same thing.
So, my question is how do I fix this or is there even a fix for this situation? If I can't watch a movie without the fear of exiting the movie for whatever reason and not be able to return to the rented movie, I will not continue to rent movies from Apple TV. I enjoy renting them through Apple TV, but I definitely have multiple options (i.e. XBox Live, PS Network/Amazon, Redbox, etc.). I really want to understand why this is happening and if it's going to be fixed.
Thank you for any feedback!

I have been working on this project for just one day. Other people have suggested logging out and then logging back in. I have had sucsess with this sollution today.
Check this thread as well.
https://discussions.apple.com/thread/5360214?start=0&tstart=0

GR for Order (MVT 101) - Error - Table entry does not exist

I am getting error while posting GR for production order via MVT 101.
After resolving errors on G/L account and cost element, now this is the only error that I can't seem to resolve:
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
Using SE16 I tried to check for this table, but system says it is not active in dictionary.
Please help.

Hi
Please, kindly check the note 183647 - Error message M7001.
As indicated in it, please, maintain the customizing entry in transaction OPK9 for your valuation area and re-test the system behaviour afterwards.
Regards,
Mauro

Check table TFBEFU_CR: entry 10 does not exist

Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenu

Dear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

Error during Goods Receipt:Check table XMCHB: Entry 'Material no.', 'Plant

Dear All,
I am trying to post Goods Receipt for a Stock Transport Order.
The error message appears as " Check table XMCHB: entry 'material no.' 'plant', '____' , 'batch no.' does not exist. (message no. M7001)
The Supplying plant stock from which Goods Issue is done, is a Normal storage location Unrestricted stock.
The receipt has to be taken into Vendor stock (Goods Receipt movement type 101 O )
Inputs will be appreciated.

technically spoken.
table MCHB is the storage location segment of a batch record.
System tries to create an entry in MCHB without a storage location, which does not make sense.
Vendor stock does not go to MCHB, instead it is recorded in table MKOL.
If you do STOs then you may transfer vendor consignment stock, but you cannote issue own stock and receive into vendor consignment stock.

In MB1C im getting error-"Check table T004F: entry G006 does not exist"

DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHY

Check these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi

In MVT 545 Check table XEKPO: entry 00000 0000 does not exist

Similar Messages

Maybe you are looking for