Table for Changelog Deletion

Hi experts,
I would like to know is there any table which stores the changelog Deletion entries information.
In production the output of infospoke and the output of the ODS is different for the same selections.I think this problem is coming its bcz of the change log deletion in the ODS.
So please provide me with the table name so that I can clarify the same to my client.
Thanks
Bulli

Bulli,
Go to Manage on your ODS. On the main menu, go to 'environment' then choose 'delete change log data'. In the ensuing window, give your selections, your change log entries will be gone. On the contents tab strip, if you open the change log 'button', you will see your change lot table technical name on the top. Use it and go to SE11 or SE16 to open the table.
Hope this helps.

Similar Messages

Table for vendor deletion date

Hi all,
I want the table name that stores the vendor deletion date as per xk06 transaction. but not the LFA1 table as it just indicates deletion of vendor.
thanks in advance,
prash

Deletion Date is being not caputered in any table.
The only possible solution is that If you found deletion flag in any of the obove field then go into CDHDR any input Object as "KRED" and Object Value Vendor number and find the date. Take consideration of CHPOS table also.
Regards,
Rajesh koladiya

Log table for reservation deletion date and by

Dear ABAP'ers
Can anybody share where to find reservation deletion log include when, and by whom.
I try to search it on CDHDR but it doesn't come up. I try to put reservation number in each "Change Doc Object", "Object Value", "Document Number" field, but it doesn't work.
Any advice?
Thank you
Regards
Hadi

Hi,
have u tries tcode SM12 for log entries, just specify the object name and shall get all the details...
if still the issue is unsolved, pls let me know!!!!
thanks
ravi

Best Practice for Mass Deleting Transactions

Hi Gurus
Can you please guide on this - We need to mass delete Leads from the system. I can use Crm_Order_Delete FM. But want to know if there are any best practices to follow, or anything else that i should consider before deleting these transactions from the system.
We have our archiving policy under discussion which may take some time, but due to large volume of reduntatn data we have some performance issues. For example when searching for leads and using ACE, the system goes through all the lead data.
That is the reason we are plannign to delete those old records. My concerns is that using CRM_ORDER_DELETE, would it clear all the tables for those deleted transactions and if there are any best practices to follow.
Thanks in Advance.
Regards.
-MP
Edited by: Mohanpreet Singh on Apr 15, 2010 5:18 PM

Hi,
Please go through the AppModel application which is available at: http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
The OnePage Table Based example shows exactly how to use deleting multiple rows from a datatable...
Hope this helps.
Thanks,
RK.

Oracle Auditing for Insert/delete in a Table

Dear Oracle Guru's
I have a Master table for which records are added manually using the Insert command and not by any front end tools.
I have no Auditing for this table , like when an insert/delete is made in to this table.
Does oracle provides any other Tables/views like v$session to find out when such events happens.
Kindly guide me
With Warm Regards
ssr

Probably not.
If your database is in ARCHIVELOG mode and you have the archived logs from the point in time that the DML happened, you could potentially use LogMiner to read the redo logs and get information about when the DML happened and who was responsible. That tends, however, to be a relatively painful manual process that is frequently complicated by the fact that most shops get rid of archived logs as soon as they are no longer necessary for database recovery which is frequently a matter of days or weeks.
Justin

Table name for asset deletion record

Hi,
Please tell me the table name for asset deletion record.
Thanks...

Hi,
Find Asset deletion tables below.
CDHDR Table for find the list of Retired / deleted assets (use SE16 for the same and put T. Code ABAVN / AS06)
CDPOS
Regards,
JA
Edited by: javeed ahmed on Jan 14, 2010 12:10 PM

Table for defect or damage code deletion field.

Dear All,
We have developed Z-Report in quality for recording defect.
I used viqmfe table for defect recording and field is fecod-damage code.
But my problem is after deleting defect in qa32,in z-report the defect is remain as it is.
I have already search defect deletion field, still ihave not got this field.
Pls suggest.
Thanks
Shabbir

Hi ,
Please checQMFE, QMSM,QMAA, QMIH & for all deletion indication entries
you need to get the corresponding flag for fiedl like KZLOESCH .
Ramesh

Table for deleted requests information

Hi,
can any one please tell the table name where the information of all the deleted request get stored. we want the user name, time, the data target name, req id (LOG) for the deleted request to be displayed through a report.
Thanks,
Pallavi

Dear PVP,
Check RSREQDONE..
Also,,
RSMONICDP table - there you can see requests status. Try to understand if red status means that a red request is still sitting in the data target, or it is deleted.
RSICPROT - there is a request description in the EXTNUMBER field. Some of them may contain 'DELET' word. Maybe these are deleted requests?
Hope this helps u..
Best Regards,
VVenkat..

Table for Deleted PR's

HI,
What is the table for Deleted Purchase requisitions through MRP.
Thanks in Advance.

Hi,
As per as MRP deleted PR are concren you will not get those PR because in MR PR are created when you explore the process order and once you run the MRP that process order get deleted and new process order comes into picture so you will not get those PRs
One thing like to add if you have explore the Process oder and once Prrocess orders are converted into PR those PR you can get in EBAN by selecting Creation indicator ad B and deletion indicator as X
Hope this will help
regards
Edited by: Roy Anamika on Jul 2, 2009 11:17 AM

Tables for deleted request.

Hi experts,
Is there any table which stores the deleted request number?
Tahnks,
Abhishek.

Hi,
Use below tables for Transport Requests E070 and E071.
Regards
Jana

PO creation for a deleted PR

Hi all,
1.How can u restrict the creation of PO for a deleted PR?
I have made the two system messages 06 076 and 06 400 to 'E'.
Still it is allowing me to create PO?.........
2.I created one PO with PR,I deleted the reference PR from PO,still PR status is PO created only.I expect the PR status to be Not edited.
No other POs exist also.
Can anyone plz help.
Thanks ,
Tess

Dear Tess,
1. You should not be able to create a PO with reference to a deleted PR.
2. You can implement a proper BAdi/Enhancement.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Reward points if this is helpful.
Regards,
Naveen.

How to find total recs in a local table for a particular condition

Hi,
How to find total recs in a local table for a particular condition?
Thanks,
CD

Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 <> 'A'.
lv_count = lines( itab_tmp ).
Regards,
Rich Heilman

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

How to find out query for the deleted record.

Hi Guys,
We are using Oracle9i release 1. We are about 5 employees who are working on the same application. All Employee are connected to the same Schema (User)
User: Employee/web
Now one of the user have deleted like 200,000 records from a table. We just want to trace out the query by which these records were deleted.
From which file i can get the log of executed queries so that i can recover the data.
Just want to know the query executed for this deletion of records?
we are using windows server.
Regards,
Imran Baig

If you do not need an exact query, but only the way you can reconstruct the data, LogMiner can be solution for you. Below I have put a simple example you can review it if you want.
[email protected]> create table t201 as select object_id , object_name from all_objects where rownum < 10;
Table created.
[email protected]> select * from t201;
OBJECT_ID OBJECT_NAME
17918 /1005bd30_LnkdConstant
7540 /10076b23_OraCustomDatumClosur
23355 /10297c91_SAXAttrList
14204 /103a2e73_DefaultEditorKitEndP
22920 /1048734f_DefaultFolder
10154 /10501902_BasicFileChooserUINe
23566 /105072e7_HttpSessionBindingEv
23621 /106ba0a5_ArrayEnumeration
9830 /106faabc_BasicTreeUIKeyHandle
9 rows selected.
[email protected]> delete t201 where object_id < 10000;
2 rows deleted.
[email protected]> commit;
Commit complete.
[email protected]> alter system switch logfile;
System altered.
[email protected]> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS FIRST_CHANGE# FIRST_TIM
1 1 41 10485760 2 YES ACTIVE 58320830 25-MAR-06
2 1 42 10485760 1 NO CURRENT 58348006 25-MAR-06
3 1 40 10485760 1 YES INACTIVE 58293190 25-MAR-06
[email protected]> select * from v$archived_log where sequence# = 41;
RECID STAMP
NAME
DEST_ID THREAD# SEQUENCE# RESETLOGS_CHANGE# RESETLOGS FIRST_CHANGE# FIRST_TIM NEXT_CHANGE# NEXT_TIME BLOCKS
ARC APP
DEL S COMPLETIO DIC DIC END BACKUP_COUNT ARCHIVAL_THREAD# ACTIVATION#
86 585998848
C:\ORACLE\ORADATA\MOB92\ARCH\ARC00041.001
1 1 41 57407039 20-MAR-06 58320830 25-MAR-06 58348006 25-MAR-06 20282
YES NO
NO A 25-MAR-06 NO NO NO 0 1 2555135919
[email protected]> exec dbms_logmnr.add_logfile('C:\ORACLE\ORADATA\MOB92\ARCH\ARC00041.001',dbms_logmnr.new)
PL/SQL procedure successfully completed.
[email protected]> exec dbms_logmnr.start_logmnr(options => dbms_logmnr.dict_from_online_catalog)
PL/SQL procedure successfully completed.
[email protected]> l
1 select sql_undo, sql_redo
2 from v$logmnr_contents
3 where username = 'MOB' and timestamp > sysdate - 1
4* order by timestamp
insert into "MOB"."T201"("OBJECT_ID","OBJECT_NAME") values ('7540','/10076b23_OraCustomDatumClosur');
delete from "MOB"."T201" where "OBJECT_ID" = '7540' and "OBJECT_NAME" = '/10076b23_OraCustomDatumClosur' and ROWID = 'AAAIE2AAXAAAFVaAAB';
insert into "MOB"."T201"("OBJECT_ID","OBJECT_NAME") values ('9830','/106faabc_BasicTreeUIKeyHandle');
delete from "MOB"."T201" where "OBJECT_ID" = '9830' and "OBJECT_NAME" = '/106faabc_BasicTreeUIKeyHandle' and ROWID = 'AAAIE2AAXAAAFVaAAI';
Best Regards
Krystian Zieja / mob

Values in table control getting deleted on vertical scrolling

I have a table control which is associated with an internal table.Whenever I scroll down the values in the table control gets deleted.
I tried solving the issue of scrolling by keeping another internal table as reference and syncing the values to my internal table; but after doing that whatever changes I make after scrolling is not reflected in the internal table.I'm using a db structure with abt 130 fields for my table control and there are no fields defined as primary keys.I tried using the modify statement but it's giving sy-subrc = 4 everytime.
Could anyone suggest a solution?

Debugging will solve your problem.
The solution for this question is /h -> hit scroll button

Table for Changelog Deletion

Similar Messages

Maybe you are looking for