Table for combination of Purchase requestition doc type and Purchase order doc type

Hi,
scenario:
Purchase requestion has document type of Direct purchase which has allowable item category "Standard, consignment, subcontracting, third party and stock transfer".
Purchase order has document type of indirect purchase which has allowable item category "standard and services".
Now i saw in Define Document type OMEC, 'Doc type-Direct purchase' of purchase requestion is being linked to 'Doc type-Indirect purchase' of purchase order.
Question:
Can you please let me know how to pull of data for combination of 'Doc type-Direct purchase' of purchase requestion and 'Doc type-Indirect purchase' of purchase order from SE16N? (assuming that we dont know what PR is converted to PO for the above combination)
Note: Please don't delete this thread

You did the hardest part: finding the custo in SPRO.
Once you there, just click "table view" :
and then on "print"
Once you click, you see the table name you are looking for:
Hope it helps,
Génia.

Similar Messages

Suggestion for Pricing Type and Pricing Exchange Rate Type

Dear All,
Good Day,
what would be your recommendation to maintain Pricing type and Pricing exchange rate type for below process.
1. Invocie.
2. Cancellation of Invoice.
3. Return Invoice.
4. Credit Note.
5. litigious Invoice.
Best Regards,
KSK

Thanks sam,
I have configured the same but now problem is Billing Header Exchange rate is not changing. Because of that Accounting document also doesn't have new exchange rate,.
1. Is there any another config needs to be maintain.
Example:
Sale order Exchange rate              10.45           Order date : 01.11.2008
Billing Header Exchange Rate         10.45           Billing date : 05.11.2008
Billing Line item Exchange Rate      11.00           Billing date : 05.11.2008 base on VTFL Config
Account Document Exchange Rate 10.45          Posting date : 05.11.2008 because of Billing Header exchange Rate
I need Accounting document also to carry New exchange rate 11.00 . suggest me.
Best Regards,
KSK

I purchased a Slingbox HD and purchased the app for my iPad 2. I am wondering if I can load the app on my old iPad?

I purchased a Slingbox HD and purchased the app for my iPad 2. I am wondering if I can load the app on my old iPad without having to pay $30 again?

Where did you download the app from?
I can't find it at the iTunes app store. If you downloaded the app directly from the app developer's site, you need to contact them.

Settings for the relation of requirement type and planned order type

Dear Gurus
Where we maintain the settings for the relation of requirement type and planned order type?Actually I have maintained strategy 60 for a particular material (planning material) so the requirement type is vsev and along with that the planned order type is coming is vp i.e non convertible planned order.That is ok the system is behaving right.But nowhere I can find the setting of vp with vsev how the system is picking vp?
Regards
Sandip Sarkar

Hi!,
That is an inbuilt sytem setting and you can't change that.
Regards,
Uday

I purchased keynote for my new iPad do I need to purchase keynote for my iMac? When I try and purchase keynote for my iMac I am told that "you have already purchased keynote, do you want to purchase it again?" Answer NO. I try to open the keynote app

I purchased keynote for my new iPad do I need to purchase keynote for my iMac?
When I try and purchase keynote for my iMac I am told that "you have already
purchased keynote, do you want to purchase it again?" Answer NO. I try to open the
keynote app on my iMac and it asks "do want to buy iWork again?" answer NO. Then the keynote app
closes. What an I to do?

Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

First derived wage type and second derived wage type

Hi all,
Can any of u elaborate in detail what is the use of first derived wage type and second derived wage type in v_512w_b.
Regards,
Prasad

Hi,
This table allows you to make calculation for current wage type and generate 2 more.
This is hypothetical example: according to the law for overtime during weekend employee is entitled for hourly compensation for every hour worked, extra pay of 50% for overtime, and extra pay of 20% for work during weekend. All these payments should be reflected on payslip.
Then you set WT: 1001 - Hourly rate, 1002 - Overtime, 1003 - Work in WE.
After that you specify generation rule for WT 1003 that it must be generated for every overtime hour worked in WE.
In table V_512W_B you set valaution bases:
Current WT
Valuation basis - 01, statement WT - 1003, % rate - 20%
1st derived WT
Valuation basis - 01, statement WT - 1001, % rate - 100%
2nd derived WT
Valuation basis - 01, statement WT - 1002, % rate - 50%
For example, employee worked 5 hours overtime during WE, and hourly rate is 10 USD, then he will get in his payslip:
WT 1001 - 5 hours 50 USD
WT 1002 - 5 hours 25 USD
WT 1003 - 5 hours 10 USD.
Wage types 1001 and 1002 were derived from WT 1003.
Cheers

The JNI defines a mapping of Java types and native (C/C++) types.

As per the tutorial
The JNI defines a mapping of Java types and native (C/C++) types.Does the above sentence mean that I can use dll written in C/C++ only and not dll written in Pearl.
Could anyone please give me the solution.

Please do tell me how can I call a dll file created in Perl ....And I will point out again that I doubt that it is possible to create a dll that has the following characteristics
1. Is in fact a dll.
2. Is in fact intended to run anywhere outside of the perl engine.
Step 2 means that you run perl, not a "perl dll" via C.
You can do that or at least in the past you could. And that has nothing to do with java nor JNI. So you would learn about it on a perl site.
And I can only note that when I did that a number of years ago it was very difficult. Certainly much harder than getting JNI to work. And you had better have quite a bit of C/C++ experience before you attempt it.

Table for finding rate based on part code and material

Hi Experts
I am an ABAP consultant with ltd knowledge on SD . Please tell me in which table I can find the rate based on party code and material .

Hi
The standard table is A305. But usually these tables can be customized based on the requirement. So if you are aware about the Condition type for which this Price/Rate is maintained you can find the same in VK13.
In transaction code VK13, maintain the condition type and click on "Condition information" icon. Now dont maintain any input date. Just click on Execute icon or F8. System will give the list of all the tables and data maintained based on the combination.
Select the required table.In SE11, maintain this table with prefix as A. You can get all the required information.
Regards
Vamsi

One Conversion Type and two Exchange Rate Types in one report

I have Conversion Type called TEST. In this Conversion Type there is Exchange Rate Type D selected (D-daily). I have also Fixed Target Currency selected. And the report works perfectly fine....BUT.......there is also Exchange Rate Type M defined in the system (and it used for the exchange rate used last day of the month).
The question is: how to put both Exchange Rate Types into one Conversion Type so both types are used in the reports?

Hi,
You can go for a variable exchange rate type.
Creating variable:
For this you have create a varible which can take diffrent exchange rate types.
Open query designer create a new dummy query in that search for infoprovider 0RTYPE.
It will have one dimension(name ->key) with 0RTYPE in it.
create a variable for 0RTYPE.
Save and close the query.
goto RSCUR -> give your translation type -> go to exchange rate tab -> choose Ex. Rate from var option -> give the variable you have created prviously for 0RTPYE.
Rest all same but just for completion...
Go to your query in which in u want to do cur conversion.
Double click on the key fig
Go to conversions tab-> select the conversion type u created in RSCUR.
When you run the query you can select the exchange rate type in the variable screen.
rgds,
Raghu

BPM scenario:single sender message type and multiple receiver message types

Hi,
I am doing a scenario in which i have a single file which may contain different record types say type A,B,C.
I want to separate all records of type A, all records of type B, also all records of type C into different files.
so i will have 3 files of type record A,B,C in destination.
I am using File adapter on both sides.
I think one way may be using ccBPM.Can you please inform me how to achieve it using BPM.
If there is any other way Please mention.

You can use multimapping (with or without BPM)
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible ....without BPM
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ....with BPM...is it that you will always get three output files?

Regarding Industries type and including the material types in indu sector

Hi Gurus,
I have query regarding the above subject.
i want to add my own material types to my own inds sectors in MM01 screen.
I dont know how to do that?
Please help me.
Pran

Hi,
OMS2 - Material Type
Here you can select the standard material type and copy to new one
OMS3 - Industry Sector
Here create industry sector by "New Entries" and assign the field reference as per requirement.
Then check in MM01, it will start appearing.

Table for storing serial number data assigned to material in delivery doc.

Hi All,
Kindly tell me the table name in which the serial numbers assigned to the material in the delivery document are stored.
I have seen VBPM table, but it is not been updated.
regards
Ravi

Hi
There is no particular table wherin the serial number is stored for a material. A Ztable has to be created for the serial number to flow from the delivery.
For a combination of material and serial number, there exists an equipment number. Go to IQ03 and enter the serial number and get the equpment number details. Go to table EQUI and enter the equipment number to get the serial number (SERNR field).
Award points if the above info helps.
Regards

Excise duty condition type and Purchase Order Print Issue

Dear Friends,
We have a issue related to Purchase order print out.
We are maintaining TAXINN.
We have implemented CIN and we are maintaining Excise Conditions i.e. Basic Excise in JMOP
In FV11 we are maintaining values for JMOP with plant and material Group combination.
In Purchase Order Tax calculation is happening correctly.
But issue is to find the value of taxes for Purchase Order Print.
We are using function module CALCULATE_TAX_FROM_NET_AMOUNT
and passing values of Company Code, Country, Currency, and Base amount to get the entries in condition types.
But we are not getting any entry even after passing the values.
How we can get these values in JMOP.
Regards
Kant

Why do you want to calculate the taxes during the PO Print when you are getting correct values in PO itself?
Modify your print program with pulling values directly from EKPO/ EKKO Tables and display it to Spool.
check with ur ABAP Person

Text table for long text of product catalog area and product description

Hi experts,
I'm a new comer in CRM, what my current job is to do the translation for CRM system and its portal, e.g. webshop. Now I met some questions as below, Could you please give me some advices?
1. Long text for product catalog area (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
I found a table named STXL(STXD SAPscript text file lines), maybe, it is related to the long text(product catalog area), but I can not get anything from the field CLUSTD of the table STXL as its data type is RAW. Maybe, there is a text table in CRM to store these long text information, but I dont know, Could you please give me some ideas?
2. Long text for product description (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
I found a table named COMM_CFGLNGTXT(Long Texts for Different Objects), I can find some long texts(product description) in this table, but some others, I can not find them. I dont know why? Maybe it is not a correct text table. Could you please give me some advices?
Thank you very much.
Quanyin

Hi Uwe,
Implement the BADI DOC_PERSONALIZE_BCS and use method PERSONALIZE_DOCUMENT. In this method therz an parameter FLT_VAL, this can be used to derive the description.
Award points if its useful....
Regards,
B Raju

Material doc. list and purchasing process

Hi Gurus,
Can anyone please tell me how can Material Document List can be used to support the purchasing process (what decision(s) would this information support, and/or how could it improve the efficiency or effectiveness of the process

Hi Priya,
Material Document list are basically used for reporting in Inventory Management.
To simplify your day-to-day work with the Inventory Management component, there are a range of functions and reports that provide extensive information on all materials and their stock data.
This section provides an overview of the reporting function in Inventory Management. For more information, see the documentation on each function or the relevant report documentation.
Features
Environment Menu
List displays
This provides reports for documents posted in Inventory Management. Example: Material document list (MB51).
Stock
This provides information on a materialu2019s stocks. Example: Current stock/requirements list (MD04).
The Stock Overview (MMBE) provides an overview of all stocks of a material over all organizational levels (see also Stocks, Plant and Storage Location).
Information
This allows you to display data (master data, transaction/movement data) from other applications. Example: Displaying a purchase order.
Balance display
This provides reports on the GR/IR clearing account (MB5S).
Consignment
You can use this to display all information on consignment stocks. Example: Displaying vendor consignment stocks (MB54).
Batch where-used list
This provides all the functions on the Batch Where-Used List.
Batch search strategy
You use this to define the strategies for Batch Determination.
Inventory Controlling
You can also analyze and evaluate material stocks using Inventory Controlling. For more information, refer to the LO u2013 Logistics Information System component.
Periodic Processing Menu
List of stock values (MB5L)
This report is used to display the total stock quantity and the total stock value for a material at plant and storage location level.
Consistency check (MB5K)
You can use this to check the consistency of your stocks at company code level, valuation area level, and material level.
Managing held data (MBPM)
When you enter a goods receipt, this function allows you to display and delete data that you have held for further processing but not yet posted.
Analysis of rounding differences (MB5U)
This function allows you to analyze rounding differences that resulted from conversion between units of entry and base units. This applies when you work with a material with metric and non-metric units of measurement, for example.
Activities
For the reports that work with the SAP List Viewer, you can configure the output list as you require, to display and evaluate further data. To extend the current layout (basic list) or select another existing layout, choose Settings ® Layout. You can also create your own layouts and choose them on the initial screen. For more information on the SAP List Viewer, see the SAP List Viewer component.
To recognize any data inconsistencies in your system early on, we recommend you run the following reports regularly, for example, monthly or at year-end closing:
List of stock values: Balance display (MB5L)
See also Carrying Out Year-End Closing.
Consistency check (MB5K)
Check Under Help.sap.com "Reporting in Inventory Management "

Table for combination of Purchase requestition doc type and Purchase order doc type

Similar Messages

Maybe you are looking for