Table for storing serial number data assigned to material in delivery doc.
Hi All,
Kindly tell me the table name in which the serial numbers assigned to the material in the delivery document are stored.
I have seen VBPM table, but it is not been updated.
regards
Ravi
Hi
There is no particular table wherin the serial number is stored for a material. A Ztable has to be created for the serial number to flow from the delivery.
For a combination of material and serial number, there exists an equipment number. Go to IQ03 and enter the serial number and get the equpment number details. Go to table EQUI and enter the equipment number to get the serial number (SERNR field).
Award points if the above info helps.
Regards
Similar Messages
-
Table for storing serial number data assigned in delivery doc
Hi,
What's the table linking the serial number with the delivery doc.
I've found VBPM but it's not working at all.
Thanks.What is the name of the field? Is it SERNR?
You may be interested in these threads;
[Serial number|Re: Serial Number Table]
[serial number -function module|How to get serial numbers for materials in stock.]
Regards, -
Table to find serial number for the stock of a material
Dear All,
I have a requirement in which i want to find the serial number for the stock of a material.
in Equi i have serial number with material.
But i want it with plant also.
pl. suggest me in which table u have serial number,material , plant and storage location.
Regards & thanks,
VidhyaThanks kesav.
I checked EQSE table in that no entries are found.
In EQBS table for that equnr u have plant and storage location.
but the performace while selecting EQUI on the whole will be very slow.
so i want a table with material,serial number,plant and storage location.
kindly suggest. -
The table for storing data for infocube and ODS
Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit. -
Help: How to add serial number data into Delivery Order document
Dear Gurus,
I am creating an interface program and I have problem in attaching the serial number data to the corresponding material code for a certain delivery order document in R/3 4.6C SP22 system.
The serial number can be attached either during the creation of the Delivery Order itself or in the subsequent step after creating the Delivery Order (i.e.: create the D/O document first, and then update the D/O data).
The BAPI_OUTB_DELIVERY_CONFIRM_DEC FM does not provide any input parameter to let me put the serial number in this R/3 version.
By tracing in SE30 the standard program VL02N --> Menu --> Extras --> Serial Number --> Continue (Enter) --> Save (Ctrl+S), I found out that the serial attachment 'might' be done during sub-routine SERIAL_LISTE_POST_LS in program SAPLIPW1. It will in turn executes FM SERIAL_LISTE_POST_LS. The commit to database table will be done in update task by FM OBJK_POST_UPDATE_N and SERIAL_POST_UPDATE_LS.
<b>My question:</b>
============
1. Is FM SERNR_ADD_TO_LS can be used to attach the serial number to D/O?
If yes, how to do it please because I already tried it I can not see the serial information in VL02N after that. There is no any insert or update to database in this function module. Should I call other FM after this? I want to try to call FM OBJK_POST_UPDATE_N and SERIAL_POST_UPDATE_LS but I do not know how I can retrieve the global object such as XOBJK_ALL that is necessary for the input parameter.
2. If SERNR_ADD_TO_LS can not be used, what other FM can I use? Can I call SERIAL_LISTE_POST_LS instead? Is there any reliable way to generate the import parameter for this FM, such as XSER00, XSER01, XOBJK_ALL and XEQUI?
Thank you in advanced for your kind assistance.
Best Regards,
HiroshiTry something similar to this below...
Afterwards you should do a call transaction to VL02N and immediately SAVE. This is sufficient to ensure the status on the serial numbers is updated correctly.
FUNCTION z_mob_serialnr_update_ls.
""Local interface:
*" IMPORTING
*" VALUE(VBELN_I) LIKE LIKP-VBELN
*" TABLES
*" SERNO_TAB STRUCTURE RISERLS
*" YSER00 STRUCTURE SER00 OPTIONAL
*" YSER01 STRUCTURE RSERXX OPTIONAL
*" YOBJK_ALL STRUCTURE RIPW0 OPTIONAL
*" YEQUI STRUCTURE RIEQUI OPTIONAL
*" YMASE STRUCTURE MASE OPTIONAL
*" EXCEPTIONS
*" NO_EQUIPMENT_FOUND
The modified/confirmed table of serial numbers is supplied in
SERNO_TAB.
These are updated in the SAP tables
YSER00 - General Header Table for Serial Number Management
YSER01 - Document Header for Serial Numbers for Delivery
YOBJK_ALL - Internal Table for Object List Editing/Serial Numbers
YEQUI - Internal Structure for IEQUI
local data
DATA: BEGIN OF del_wa,
vbeln LIKE likp-vbeln,
posnr LIKE lips-posnr,
matnr LIKE lips-matnr,
lfimg LIKE lips-lfimg.
DATA: END OF del_wa.
DATA: del_tab LIKE del_wa OCCURS 0.
DATA: _ct TYPE i.
DATA: lastobknr LIKE objk-obknr.
DATA: _debug.
CLEAR: yser00, yser01, yobjk_all, yequi, ymase.
REFRESH: yser00, yser01, yobjk_all, yequi, ymase.
GET PARAMETER ID 'ZEDI_DEBUG' FIELD _debug.
OBJECT KEYS
read the delivery items with serial numbers to be processed
SELECT * INTO CORRESPONDING FIELDS OF TABLE del_tab
FROM lips
WHERE vbeln = vbeln_i
AND serail NE space.
if nothing is relevant for serial numbers bailout
DESCRIBE TABLE del_tab LINES _ct.
IF _ct IS INITIAL.
EXIT.
ENDIF.
==== read the existing object keys for delivery items
SELECT * INTO CORRESPONDING FIELDS OF TABLE yser01
FROM ser01
WHERE lief_nr = vbeln_i.
IF sy-subrc = 0.
yser01-dbknz = 'X'. "entry exists in db
MODIFY yser01 TRANSPORTING dbknz WHERE dbknz = space.
ENDIF.
== check if there is a header entry for the delivery item
LOOP AT del_tab INTO del_wa.
READ TABLE yser01 WITH KEY lief_nr = del_wa-vbeln
posnr = del_wa-posnr.
IF sy-subrc NE 0.
create one
CALL FUNCTION 'OBJECTLIST_NUMBER'
IMPORTING
obknr = yser01-obknr.
yser00-mandt = sy-mandt.
yser00-obknr = yser01-obknr.
APPEND yser00.
SELECT SINGLE kunnr INTO (yser01-kunde)
FROM likp
WHERE vbeln = vbeln_i.
yser01-mandt = sy-mandt.
yser01-lief_nr = del_wa-vbeln.
yser01-posnr = del_wa-posnr.
yser01-vorgang = 'SDLS'.
yser01-vbtyp = 'J'.
yser01-bwart = '601'.
yser01-dbknz = space. "not in db
yser01-loknz = space. "do not delete
APPEND yser01.
ENDIF.
ENDLOOP.
check if any entries should be deleted
LOOP AT yser01.
READ TABLE serno_tab WITH KEY vbeln = yser01-lief_nr
posnr = yser01-posnr.
IF sy-subrc NE 0.
yser01-loknz = 'X'. "mark for delete
MODIFY yser01.
ENDIF.
ENDLOOP.
collect all the object keys for the delivery item with s/n's
LOOP AT yser01.
READ TABLE serno_tab WITH KEY vbeln = yser01-lief_nr
posnr = yser01-posnr.
IF sy-subrc = 0.
READ TABLE yser00 WITH KEY obknr = yser01-obknr.
IF sy-subrc NE 0.
yser00-mandt = yser01-mandt.
yser00-obknr = yser01-obknr.
APPEND yser00.
ENDIF.
ENDIF.
ENDLOOP.
IF NOT _debug IS INITIAL. BREAK-POINT. ENDIF.
SERIAL NO OBJECTS
==== read the existing serial numbers from the database
via object number into YOBJK_ALL
LOOP AT yser00.
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE yobjk_all
FROM objk
WHERE obknr = yser00-obknr.
ENDLOOP.
yobjk_all-dbknz = 'X'.
MODIFY yobjk_all TRANSPORTING dbknz WHERE dbknz = space.
=== add any new serial numbers
LOOP AT serno_tab.
READ TABLE yser01 WITH KEY lief_nr = serno_tab-vbeln
posnr = serno_tab-posnr.
READ TABLE yobjk_all WITH KEY sernr = serno_tab-sernr
matnr = del_wa-matnr.
IF sy-subrc NE 0.
this is a new serial number
yobjk_all-mandt = sy-mandt.
yobjk_all-obknr = yser01-obknr.
yobjk_all-obzae = 0.
yobjk_all-equnr = yequi-equnr.
yobjk_all-objvw = 'S'.
yobjk_all-sernr = serno_tab-sernr.
yobjk_all-matnr = del_wa-matnr.
yobjk_all-datum = sy-datum.
yobjk_all-taser = 'SER01'.
yobjk_all-equpd = 'X'.
yobjk_all-objnr = yequi-objnr.
yobjk_all-dbknz = space.
yobjk_all-loknz = space.
APPEND yobjk_all.
ENDIF.
ENDLOOP.
=== mark any which are no longer confirmed as deleted
LOOP AT yobjk_all.
READ TABLE yser01 WITH KEY obknr = yobjk_all-obknr.
READ TABLE serno_tab WITH KEY vbeln = yser01-lief_nr
posnr = yser01-posnr
sernr = yobjk_all-sernr.
IF sy-subrc NE 0.
yobjk_all-loknz = 'X'.
MODIFY yobjk_all TRANSPORTING loknz.
ENDIF.
ENDLOOP.
EQUIPMENT RECORDS
== get the equipment records
LOOP AT yobjk_all.
SELECT SINGLE * INTO CORRESPONDING FIELDS OF yequi
FROM equi
WHERE sernr = yobjk_all-sernr
AND matnr = yobjk_all-matnr.
IF sy-subrc NE 0.
CONTINUE.
ENDIF.
IF yobjk_all-dbknz = space AND
yobjk_all-loknz = space.
yequi-dbknz = 'X'.
yequi-obknr = yobjk_all-obknr.
yequi-j_vorgang = 'PMS3'. "add to delivery
yequi-matnr_old = yequi-matnr.
APPEND yequi.
yobjk_all-equnr = yequi-equnr.
MODIFY yobjk_all TRANSPORTING equnr.
CONTINUE.
ENDIF.
IF yobjk_all-dbknz = 'X' AND
yobjk_all-loknz = 'X'.
yequi-dbknz = 'X'.
yequi-j_vorgang = 'PMSA'. "delete from delivery
yequi-matnr_old = yequi-matnr.
APPEND yequi.
CONTINUE.
ENDIF.
ENDLOOP.
remove any Equipment records that do not need to be processed
DELETE yequi WHERE j_vorgang IS initial.
IF NOT _debug IS INITIAL. BREAK-POINT. ENDIF.
fill the object counter
LOOP AT del_tab INTO del_wa.
READ TABLE yser01 WITH KEY lief_nr = del_wa-vbeln
posnr = del_wa-posnr.
DO del_wa-lfimg TIMES.
READ TABLE yobjk_all WITH KEY obknr = yser01-obknr
obzae = sy-index.
IF sy-subrc NE 0.
READ TABLE yobjk_all WITH KEY obknr = yser01-obknr
obzae = 0.
IF sy-subrc = 0.
yobjk_all-obzae = sy-index.
MODIFY yobjk_all INDEX sy-tabix TRANSPORTING obzae.
ENDIF.
ENDIF.
ENDDO.
ENDLOOP.
IF NOT _debug IS INITIAL. BREAK-POINT. ENDIF.
===========================================
update the delivery
===========================================
CALL FUNCTION 'SERIAL_LISTE_POST_LS'
TABLES
xser00 = yser00
xser01 = yser01
xobjk_all = yobjk_all
xequi = yequi
xmase = ymase.
TAB_CUOBJ =
XSER03 =
CALL FUNCTION 'STATUS_BUFFER_EXPORT_TO_MEMORY'
EXPORTING
i_memory_id = memid_status.
COMMIT WORK AND WAIT.
CALL FUNCTION 'Z_MOB_SERIALNR_REFRESH_LS'
EXPORTING
ctu = 'X'
mode = 'N'
UPDATE = 'L'
GROUP =
USER =
KEEP =
HOLDDATE =
NODATA = '/'
vbeln_i = vbeln_i.
IMPORTING
SUBRC =
TABLES
MESSTAB =
ENDFUNCTION.
FUNCTION z_mob_serialnr_refresh_ls.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(VBELN_I) LIKE LIKP-VBELN
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
DATA: vbeln_001 LIKE bdcdata-fval.
vbeln_001 = vbeln_i.
subrc = 0.
PERFORM bdc_nodata USING nodata.
PERFORM open_group USING group user keep holddate ctu.
PERFORM bdc_dynpro USING 'SAPMV50A' '4004'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LIKP-VBELN'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LIKP-VBELN'
vbeln_001.
PERFORM bdc_dynpro USING 'SAPMV50A' '1000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=PSER_T'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LIPS-POSNR(01)'.
PERFORM bdc_dynpro USING 'SAPLIPW1' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RIPW0-SERNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=RWS'.
PERFORM bdc_dynpro USING 'SAPMV50A' '1000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH_T'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LIPS-MATNR(02)'.
PERFORM bdc_transaction TABLES messtab
USING 'VL02N'
ctu
mode
update.
IF sy-subrc <> 0.
subrc = sy-subrc.
EXIT.
ENDIF.
PERFORM close_group USING ctu.
ENDFUNCTION.
INCLUDE bdcrecxy. -
BAPI or FM for Get serial number
Hi,
We ahve many material for whcih we are maintaining serial numbers, now we are excuting some T. code with 3rd party software and the communication is done through RFC, as in case of Material issue with movement type 201, for serialize material we have to enter the serial number, we can enter it manually or if we click on create serial number automatically, system get the automatic serial number, so thier any Function al module or BAPi for getiing serial number automatically for the materials. which we can use in RFC.
regards,
zafarHello,,
ASSIGN_SERIAL_NUMBER_SD Listing of Material Serial Nrs
SERIAL_NUMBER_GET_MATERIALS Get Serial Nrs
SELECT_MATERIAL_SERIAL_NRS Alternate method for selection of serial Nrs
Or esle check
Use - BAPI_EQUI_GETSTATUS i think it should give you the info
Or else check below given tables for your requirement
Tables,
SER00 General Header Table for Serial Number Management
SER01 Document Header for Serial Numbers for Delivery
SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
SER03 Document Header for Serial Numbers for Goods Movements
SER04 Document Header for Serial Numbers for Inspection Lot
SER05 Document Header for Serial Numbers for PP Order
SER06 Document Header for Serial Numbers for Handling Unit-Content
SER07 Document Header for Serial Numbers in Physical Inventory
EQBS Serial Number Stock Segment
EQSE Serial Number Records
EQST Equipment to BOM Link
EQUI Equipment master data
Regards
Mahesh Naik -
Number Ranges for the Serial Number Profiles
Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant. -
Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasn't the person who set this up originally so I'm a bit lost, i cant seem to find any serial numbers on the my account section and it seems we have no registered products? can you help?
Hi There,
We have checked the details of your team, all seat are assigned properly.
Now there are few details that we would need in a Private Message so that I can assist you appropriately.
Name of the user:
Email of the user:
Meanwhile, try the below mentioned links.
Creative Cloud applications ask for serial number
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
[Note: Details that we need is critical, make sure you send them in via Private Message only.]
Thanks,
Atul Saini -
I have downloaded After Effects via the creative cloud, however it still asks me for a serial number, and I cannot log in to the licencing site.
Please helpJodie84,
I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
Cheers,
Kartikay Sharma -
Enhancement for Automatic Serial Number Generation
Hi,
Has anybody worked on the enhancement iqsm0001?
If so, please give me some idea on how to use this enhancement for automatic serial number generation.
Thanks for your kind help.
Regards,
Renjith Michael.Hi Renjith,
You can check the following link, Hope it helps you to some extent:
Re: Implement unique serial number within a client
And you can also try user exit EXIT_SAPLIPW1_001 for Automatic serial number assignment. -
What is the field name for item serial number
hi all
i am doing dispatch report .... i need field name and table name for [item serial number (min) from batch number of that delivery material,item serial number (max) from batch number of that delivery material] ... actually this was the exact term given in the spec. can any one help me out
regards
aswinsome more tables :
SER00 .. SER08 , or type SER* in SE11 and press F4, you will get some more.
and <a href="http://www.erpgenie.com/sap/sapfunc/serialnumbers.htm">Check this</a> -
I have the Photoshop Photography Program and now every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.
Jodie84,
I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
Cheers,
Kartikay Sharma -
Aperture forgets it license and asks me for the serial number over and over again
Hi,
This is getting ridiculous to the point where I'm thinking of just ditching Aperture. It's continually forgetting is license and asking me for the serial number over and over again. I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not accepting either of them. What's going on and how do I fix it permanently?
Thanks,
RobRob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
http://support.apple.com/kb/DL1610
About Aperture 3.4.3
Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie -
Keep asking for my serial number again and again
Have just installed CS5 , all paid up, all signed up, all numbers given and verified, but.....nothing CS5 works, all keep asking for my serial number again and again, accept and verify number is correct, adobe tells me I'm all up and good and running, then screen tells me I'm not licensed so it closes down. same in InDesign, and Photoshop. What the hell is going on Adobe??????
Could be a permissions problem, so the licensing never can persistently verify the serial and create the necessary key files. Try creating another user account with admin privileges and run it from there, then check the settings on your existing account and the pertinent user data folders.
Mylenium -
Table for storing inventory details in FIFO base
HI All,
Can anyone help me in finding where I can get the Table for storing inventory details in FIFO base othe rthan OINM.
Any kind of help will appreciated.
Regards:
SwatiHi Darius,
I checked tables CIFV, OIVQ,SIVQ or UIVQ table.
CIFV - We can not fetch data from SQL.
SIVQ, UIVQ - No records found
OIVQ - There is only 6607 records in this table but OINM is having 14085 so not all the transcation are in this table.
Still i am waiting for any help.
I am using SAP 8.8 PL19.
regards:
Swati
Edited by: SwatiGupta on Sep 16, 2011 7:52 AM
Maybe you are looking for
-
I was editing my photos and adding them to a album and suddenly the app is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.
-
When I burn my slideshow to a DVD, it loses focus. How can I retain the resolution of my slides?
-
Can't install dreamWeaver after packing it with CC Packager
Hi, I have done 2 installation packages with CC Packager. The first one includes Photoshop, Acrobat etc and works fine. After installing it I start Acrobat and register my Adobe ID. The second package is DreamWeaver that I want to add to the other so
-
HT2905: How to find and remove duplicate items in your iTunes library <Email Edited By Host>
-
I have recently purchased an unlocked 3rd generation Ipad in the UK. I would like to purchase an international micro SIM as I work in Japan. However All Ipads in Japan are locked to service provider so no chance to buy one here. I have seen sims on