Table for conversion of logical system
HI All
please let me know the table name which will have all source system converion list.
thanks in advance.
thx
vij
Hi,
Can also check at transaction RSA->Tools Menu->Conversion of logical system names(Displays all Source and Target Systems).
Thanks,
Rema
Similar Messages
-
Conversion of logical System Name
Hi,
I have read somewhere that Conversion of logical System Name is part of BW System check Before go live. Can someone explain the purpose of it.
Thanks in advance
krishHi,
There are two different activities related to this, if you have done the system copy then for changing the logical system name we will run BDLS transaction. Check the below link for more information,
[http://help.sap.com/saphelp_nw70/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/content.htm]
But if you want to move the source system dependent objects from one system to another system then we maintain the source system and target system mapping in target system.
For transport method you can maintain the system names as suggested by Gaurav and you can check that in table RSLOGSYSMAP or you can directly maintain entries in this table.
Regards,
Durgesh. -
Conversion of logical system names
Hi
Must the Conversion of logical system names be set up in each client.
I.e in the BW production client do I have to go and setup what the conversion is between before the transport and after the transport.
Also if I then go into this view and want to add my conversion detail, and the system doesn't exist (in table) do I have to create the entries in Dev and Transport it through?
CorneHi Corne,
If the correct entries don't exist in the underlying tables, you have maintain it in SPRO.
The entry in the table is cross client. hence it has to be done in Dev.
Go to SPRO -> SAP Netweaver -> Business Intelligence -> Links to Other Source Systems -> General Connection Settings
-> Define Logical System
1. To create a logical system, choose Edit -> New Entries.
2. Enter a name for the logical system that you want to create.
3. Enter a description of the logical system.
If you want to cange this entry:
a) Select the appropriate line.
b) Choose Edit -> Change field contents.
c) Enter the new text.
d) Choose Replace.
4. Save your entries.
Roy -
Conversion of logical system name fails
Hi,
when trying to transport a transformation on BW7 the logical conversion name is failing. When i check the setup (on rsa1 menu "Conversion of logical system names") it seams to be ok on source and target system.
Any tips to solve this ?
thx in advanceHi,
when you are not maiantained the logical systems properly , then you will get that error when you are transporting the objects
in Bi production system ( to which server you are moving objects) in that you should maiantain the all logical systems as below
1) for examaple BI deve --- BI prd
one logical systm should be bi Dev to BI prd
2) ECC production connected to BOI production
Then one more logical assignment ECC prd to BI prd
normally those two you are maintained i think so.
but when you are moving the objects from the BI development to Bi production
the daat sources are pertaining to the ECC developmet
so that ECC deve to BI Dev ( here there is no problem)
when those daat source s you are moving to production it shows error
because that ECC deve Data source logical system should be changed to BI production
so you main tain one more logical system ECC dev to ECC PRD
in your BI system
Then try reimport the same.
Thansk & Regarsd,
sathish -
Dear All,
we are in the process of coverting exsisting logical system name into new one thru BDLS.Please throw some suggestions on what are asll the areas should we take care, areas get modified like programs, rfc etc.Please reply asap
Thanks in advance
Umesh kafter a system refresh, if your logical system is using a generic name such as BW-SYS instead of BWP-001, you can change the RFC connection hostname in SM59 and stop there.
if you must change the logical system name because it it SID specific, then you must run BDLS. It can run in 2 hours... or 3 days. this depends on hardware specs and size of DB.
to help you make it run faster and in parallel, read the interesting blog about BDLS at /people/hari.peruri/blog/2006/11/01/execute-conversion-of-logical-system-names-bdls-in-short-time-and-in-parallel--intermediate -
Hi,all,
I have 3 BI box - BWD, BWQ, BWP, and 3 R3 box - R3D, R3Q, R3P, before I transport datasource, infopackage from BWD to BWQ, I configured the conversion of logical system in BWQ as: BWD -> BWQ, R3D -> R3Q, that works fine, So before I transport to P, how should I configure this mapping in BWP: BWD -> BWP, R3D -> R3P or BWQ ->BWP, R3Q -> R3P?
Thanks a lot.Hi,
You can input all four or you can input the combinations going from your Q to your P system. Both will work...
-Jacob -
Help for Job BDLS - Logical System Conversion aftrer System Refresh
hi SAP Basis Gurus,
We have restored production data to test system. After that we are doing Logical System conversion - Renaming of Logical System Names. For that we are running BDLS job. The program used is IBDLS2LS.
Now one job is running for more than 200000 seconds. Job is doing "Sequential Read" on table ZARIXCO40. The following has been updated in the jobs log:
01.02.2008 10:20:06 Processing table ZARIXCO40
02.02.2008 01:59:56 Processing table ZARIXCO40
02.02.2008 22:26:44 Processing table ZARIXCO40
02.02.2008 23:04:05 Processing table ZARIXCO40
So as per above log, it looks like job got stuck in loop for table 01.02.2008 10:20:06 Processing table ZARIXCO40.
The oracle Session is showing following SQL Statement:
SELECT
/*+
FIRST_ROWS
FROM
"ZARIXCO40"
WHERE
"MANDT" = :A0 AND "LOGSYSTEM" = :A1 AND ROWNUM <= :A2#
~
Execution Plan is :
~
Execution Plan
Explain from v$sql_plan: Address: 00000003A2FD5728 Hash_value: 2772869435 Child_number: 0
SELECT STATEMENT ( Estimated Costs = 4.094.270 , Estimated #Rows = 0 )
3 COUNT STOPKEY
2 TABLE ACCESS BY INDEX ROWID ZARIXCO40
( Estim. Costs = 4.094.270 , Estim. #Rows = 32.799.695 )
1 INDEX RANGE SCAN ZARIXCO40~0
( Estim. Costs = 418.502 , Estim. #Rows = 65.599.390 )
Search Columns: 1
~
Table has been analyzed today. See the details below:
~
Table ZARIXCO40
Last statistics date 02.02.2008
Analyze Method mple 16.623.719 Rows
Number of rows 65.599.390
Number of blocks allocated 2.875.670
Number of empty blocks 7.912
Average space 934
Chain count 0
Average row length 313
Partitioned NO
UNIQUE Index ZARIXCO40~0
Column Name #Distinct
MANDT 1
KOKRS 14
BELNR 2.375.251
BUZEI 1.000
~
Index used for this table is also analyzed today:
~
UNIQUE Index ZARIXCO40~0
Column Name #Distinct
MANDT 1
KOKRS 14
BELNR 2.375.251
BUZEI 1.000
Last statistics date 02.02.2008
Analyze Method mple 24.510.815 Rows
Levels of B-Tree 3
Number of leaf blocks 418.499
Number of distinct keys 65.480.722
Average leaf blocks per key 1
Average data blocks per key 1
Clustering factor 40.524.190
~
Can you please let me know what could be the issue and how to resolve this issue so that job gets completed. Normally this job runs for 1,00,000 seconds. I can not afford to cancel this job and run again.
Any help is Highly appreciated,
Thanks
Best Regards,
Basis CKHi Markus,
The stastics of the table is already updated today. After that also it is not going faster. It is doing "Sequential Read" for more than 5 hours and then one update is issued. And in the job log, all other tables are preocess only once, only this table is selected to processed 4 times which is very abnormal.
01.02.2008 07:43:59 Processing table ZARIXCO11
01.02.2008 07:45:36 Processing table ZARIXCO16
01.02.2008 10:17:20 Processing table ZARIXCO21
01.02.2008 10:20:06 Processing table ZARIXCO26
01.02.2008 10:20:06 Processing table ZARIXCO29
01.02.2008 10:20:06 Processing table ZARIXCO33
01.02.2008 10:20:06 Processing table ZARIXCO37
01.02.2008 10:20:06 Processing table ZARIXCO40
02.02.2008 01:59:56 Processing table ZARIXCO40
02.02.2008 22:26:44 Processing table ZARIXCO40
02.02.2008 23:04:05 Processing table ZARIXCO40
~
I guess this will keep on going like this and not sure when it gets complete. Any other thing you can suggest which help to resolve the issue.
Thanks
Best Regards,
Basis CK -
BDLS for conversion of logical source system name
Hello All,
I am trying to reassign a new source system NEW1 by replacing old source system OLD1 using BDLS in the source system.
But the NEW source system logical system name already exists as I created it . Can I delete the new source system and then use BDLS?
How do I make sure that the reassignment happens correctly?
And what precautions should be taken to avoid further consequences?
Regards,
NIKEKABBDLS does a pretty good job... Never had issues with it when using it... Always execute a test run, look for warnings or errors...
Yes, you can delete the source system before doing BDLS... I assume, since it is new, nothing is connected to it...
You always will have to check RFC connections, datasources replicas, rules, etc, once the conversion is done...
Make sure you take a look at note 886102, it has very good information and make reference to other relevant notes specific for BDLS, like 121163, 369759, etc... Read the notes carefully, follow the steps and you'll be fine...
Once everything is done and in place, you shouldn't have any surprises in the future... It's just normal maintenance...
Good luck... -
TDMS - conversion of logical systems
Hello,
during execution of activity "Assign Logical system names in receiver systems" I got empty list. Normally I was getting whole list of logical systems for both sender and receiver system. And now I have nothing...with message "No logical system name maintained for Receiver Systems".
Of course I checked BD54 and all entries are there, both systems are open, both on SP15.
Any suggestions from anyone?
cheers
MichalYou can also cross-check in table TBDLS or txn BDLS.
-
Can there be more than one port for the same logical system
Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo -
OCI Catalog for Vendor problem : Logical system for catalog not maintained
We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
Anyone an idea what the cause of this error can be or what we need to check ?
Thanks in advanceHi,
I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
SG -
Conversion of logical system names in queries
hello,
We have the following problem in our multisource model.
Constant values have been assigned in queries in development : for instance, in line 1, the profit center is restricted to the constant value D3/9000/TTBC600
D3 : development source system
9000 : controlling area
TTBC600 : Profit center code
When we transport the query, we were expecting a conversion of the source system ID in this constant value but it is not the case.
could you tell me if this is a normal behaviour??
If yes, it means that we have to enter constant value in hard code without reference to the source system ID (indirect input, you cannot enter more than the length of the object i.e. TTBC600 in this case) and this can be at the origin of conflict if we have same code in different source system.
Thanks in advance for any answer
ODDid your transports move up ok to your target system?
I am asking because your problem could be your mapping of source system to source system ID is not set up correctly or your "conversion of source system names after transport" is not set up correctly in your target system. -
I have a manual planning input screen that we are keying data in for some Measures that have been set up. One of our needs is to do a currency conversion outside the SAP delivered currency conversion. What we need is a separate table, or something, to pull from for each measure.
Example:
We are entering for both US & Mexico. The Mexico values will need to be converted from Peso to USD. They can't use the regular conversion tables because the estimates we are doing need differnt conversion rates.
So lets say we have two measures.
In this conversion table I am talking about I want the user to be able to enter a conversion factor (each week it will be different).
Then, when the values for the Measures are entered into the entry screen, we want to be able to hit the function update key (much like the standard conversion function) and have it calculate the new amount based on this other table.
Thanks, Keith JohnsonHi Keith,
Here we go again...;-)
You have two options:
1. Hold the non standard conversion rates in an InfoCube (the same as the other data or even better a separate InfoCube). The users can use BPS to enter the conversion rates. In order to calculate you can use a fox formulas (in a multi area).
2. Use a database table to hold the conversion rates. Create your own data base table for the conversion rates and let the users enter the rates via se16 or a simple ABAP transaction. In order to calculate the data you need a planning function type exit so you can reed the data base table.
I guess the first option is easier to customize.
Best regards,
Gerd Schoeffl -
Conversion of Logical System name for "Error DTP" is not working
Hi All,
I have created a DTP and corresponding "Error DTP" for handling the Error records in development.
But when i move the both the DTP's to Consilidation systems,
DTP is getting converted to the consolidation R/3 systems (Example: TQS).
But the "Error DTP" is not getting converted with the source systems as R/3 cosolidation systems (TQS) and remains as source systems as Development R/3 system(TDS).
We are in BI 7.0 version with SP level of 13.Can anyone help how to resolve this issue? or any OSS note available to resolve this issue.
Thanks,
Muruganand.KClosing Thread.
-
Table for function code of System Commands
Hi All,
I would like to know the name of the table which stores function codes (fcode) for System Commands (which that are used after abap syntax 'user-command' ).
Like table T100 is for messages and ICON is for icons, similarly, the table name for fcodes of User-commands like double click etc.
Regards,
Rumi
Edited by: rumi kamal on Jan 21, 2008 9:59 AMHi,
plz check RSMPTEXTS
Regards,
Omkar.
Maybe you are looking for
-
Can I update my iphone 4 to the iphone 4S software ?
Hi I have an iphone 4 and it has been playing up a bit . It works fine , by this I mean you can use it to make calls text and all the rest , however when I try upload any new music from itunes on to the iphone it will not work at all . I have tried o
-
How can i implement callback method in ejb?
Hi all, Sir, i want to call a client method from ejbean how can i do it. in rmi we can do it to make a remote interface on client side but i use ejbean on client side it will need to run server also on client side thats doesn't seem good to me. have
-
Hotmail won't open attachments when using Firefox. I'm not sure if this relates to cookies, add ons (I recently addded Ad-blocker and Do not track), or some other type of security setting. I have tried some proposed solutions on the we to no avail. U
-
Hi all, I am using return statement in JSP page after a redirect to stop executing that page. If the data bean is not present then it must go to previous page. When this return statement is executed the previous page is displayed but url in browser r
-
Sending my callable object as interactive form thru workflow for approval
hai I have created a sales order form as per the requirement given by sales head.Also i ve created a role in portal and have deployed my application implementing the rfc s required. i need to send my callable object(component1) to the saleshe