Table for field ZYKL1(Cycle length) & ZEIEH(Unit) used in Maintenance stra

Hi
Can anyone please inform in which table the field ZYKL1(Cycle length) & ZEIEH(Unit) used in Maintenance strategy get stored? I need to pass Maintennace plan no (WARPL) & Maintenance call no(ABNUM) to get this field ZYKL1(Cycle length).
Thanks in advance.
rgds
mehbub

Hi Rajib,
Please check the Table MHIS. It has WARPL, ABNUM & Cycle package (ZYKZT), the package from Strategy. It seems that there is screen conversion kind sort of it for the field. Just get it checked by an ABAPer.
Regards,
MLN Prasad

Similar Messages

Tables for fields for machine wise production data

PP gurus,
Plz let me know abt the tables for fields
machine code
quantity poduced
quantity rework
quantity rejected
no of settings
hours available
hours produced
time per setup(in minutes)
segemnt
Plz let me know all dse ASAP.
regards,

Sudha,
AFRC                           Incorrect cost calculations from confirmat
AFRD                           Default values for collective confirmation
AFRH                           Header information for confirmation pool
AFRP0                          Table of planned changes for confirmation
AFRP1                          Table of planned changes to conf.: Automat
AFRP2                          Table of planned changes for confirmation:
AFRP3                          Table of planned changes for confirmation:
AFRP4                          Table of planned changes to confirmatn: Da
AFRU                           Order Confirmations
AFRUHR                         Order Confirmations for HR
AFRV                           Confirmation pool
AFRV_DEL                       Backup Copy for Confirmation Pool
Regards,
Prasobh

How to create Check table for Field Maktx

Hi Experts,
I am create one ztable with fields Mandt, Matnr, Maktx, Type1 and Type2 etc.
I need a create a check table for field MAKTX.
If i give material number the its the material description also.
Thanks in Advance,
Purnaneelu.

Hi,
Actually i am create one ZTable with fields Mandt ,matnr, maktx, type1,type2 and type3
Now i am entry the data for matnr,type1,type2 and type3 .
Now i am going to TCode SE16n material is not appears, but the requirement is shows the description also
STOP USING I AM in each and every sentence...and try to correct your english...so that people can understand your problem easily.
Hope this suggestion will help you going forward at the time of posting your question at SDN.
Wram regards,
Abhishek

Where can i find table for field condition rating

hi all ,
where can i find table for field condition rating& its decription, please help me
thanks in advance to all

Hi Jurgen
thanks for the Quick reply and what shoud be the table for the field
gopal

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

Can u tell me the tables for field Cross company Purchase Order.

Can u tell me the tables for field Cross company Purchase Order.

check below link...
http://help.sap.com/bp_bblibrary/500/Documentation/J53_BPP_EN_DE.doc

How to find Tables and Fields from R3 that some InfoSource use

Hi people,
I already know how to get the table or fields from R3 that some InfoSource use by "Portal SAP" that our friend here answered.
Now, I would like to know if there is some way to get this but using some transaction in the ECC6 (R3) or BW.
I ask by that because I will be some situation that I will have to know tables and fields that some InfoSource use and maybe there isn't in the Portal SAP.
Obs.: I don't know ABAP, so I would like some way that doesn't use Debug (ABAP), if it is possible.
Thank you,
Rosana.

Hi Rosanna
In many cases you will be able to get documentation from help.sap.com regarding the tables and fields used by standard datasources. For example for all the Sales and Distribution datasources you can refer the below link
http://help.sap.com/saphelp_nw70/helpdata/en/17/cd5e407aa4c44ce10000000a1550b0/frameset.htm
Here you can click on the different datasources and see both the table and field names. If you are looking for any specific datasource let me know...may be i can help.
Thanks.

SAP table for finding Quant from the Handling unit

Hi All,
I would like to know the SAP table name - from the handling unit (where the stock received in the Warehouse), i would like to corresponding Quant ?
PSS

Hi,
To know the QUANT for handling unit, use the table LQUA.

Operation branch: Table for field VORNR1

Dear all:
In some routings (CA01, 02, 03) we have different sequences, namely parallel sequences. As you know, these sequences have normally an operation wherein the parallel sequences branches off, or where an "alternative sequence" somehow replaces the normal reference sequence vector. This operation is the operation branch.
I have a requirement where this "Branch operation" field must become empty instead of showing the applicable branch operation (namely 0020, 0040, whatever).
To do this, a possible approach is to select all sequences of all routings that have a branch operation determined. So I found that the field is VORNR1 and table is PLFLD. But then I find out that this is a structure.
My simple question, is in which table I can find this field "branch operation" so to search in this table (via SE11 for example) or do a query (SQ01) using tables MAPL -> PLKO -> PLFL or both processes and see what happens
Thanks in advance!

3 tables involved.
PLFL - Sequences, PLAS - Operation assignment, and PLPO - Operation.
1. In your task list type (PLNTY), task list key (PLNNR), group counter (PLNAL) and sequence number (PLNFL) = 0, you will get the reference sequence (BEZFL), reference node for start of sequence - Branch operation (BKNT1) and reference node for end of sequence (BKNT2).
2. Go to PLAS which is the link between PLFL (sequence) and PLPO (Operation). You will obtain internal counter (ZAEHL) by select task list type (PLNTY), task list key (PLNNR), sequence (PLNFL should equal reference sequence BEZFPL from step 1), and node (PLNKN should equal reference node of start seq. BKNT1).
3. Select PLPO with key PLNTY, PLNNR, PLNKN, ZAEHL.
Hope it helps.

Add a custom table for field selection while creating field catalog for LIS

Hi,
I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
Regards,
Akash Sinha

hi,
You need to add your field in the Data Dictionary first. For example, if
you want the new field in the Order Item field catalog do the following.
Look at structure MCVBAPUSR (SE11). If you already have a user structure
appended to this structure then you can add your new field to your existing
structure. If there is no structure already appended to MCVBAPUSR then you
must create a new structure with your field in it and then append the new
structure to this one.
If you look at structure MCVBAP you will see the data appended to the end
of it.
Now you should see it in the field catalog.
regards,
balajia

I need to know table for field CLASS , which is coming in cl30n

Hi,
I have to create a report customer meterial price.For this I need one coloumn i.e Finished Good material(coming from cl30n transaction and field name CLASS). I want to know in which table this field "CLASS" is getting stored.AS I am getting
structure CLSELINPUT where this field is stored but I need to know table .
Regards.

Hi Ian ,
Thanks for your support.I need to fetch spare part meterial on basis of this class .which is the correct table to get spare parts details and how we can link klah with it.
Regards.

Creating QRY and need Serial Number Table for Field SERNR

I am creating a SQVI Query that will give me all material in stock and their serial number or batch number. I was able to create the batch number by using:
LQUA-WERKS = Plant
LQUA-MATNR = Part Number
LQUA-LGPLA = Storage Bin
LQUA-VERME = Available Stock
LQUA-WDATU = Date of Goods Receipt
LQUA-BDATU = Date of Last Movement
LQUA-LGTYP = Storage Type
LQUA-EDATU = Date of Last Placement into Stock
LQUA-CHARG = Batch Number
OK I would like to add the Serial Number and when I review in lets say lQ01 I can't find the table name for the serial number - just the field name which is SERNR.
Does anyone know of the table name and how I can link to table LQUA?
Thanks,
Linda

Quant and the equipment master do not have direct relationship and if you are not using HUM, there is no connection between quant and the equipment master.
If you are using the euqipment master... There are number of tables that stores the serial number by the different type of assignments. For example, if you are looking for serial number assigned to delivery, you can look in SER01. If you search for table SER*, you will see all of them. These tables have the key field of "OBKNR" which can be used to access the table OBJK to find the equipment number for the serial number.
If not, SERI will give you serial number detail.

Suggest Zero line indicator - Table for Field XNUVR

Hi Gurus,
I want to find table for fiels XNUVR - Suggest zero line indicator. I have searched all the blogs but not able to find it,
Can u please guide??
Regards,
Amarnath Dube

Hi Jurgen,
Table ESDUS does not contain any field XNUVR.
Also can you please elaborate in detail about action and element.
Regards,
Amarnath Dube

Table for the recorded result.Result automatically calculated using formula

Hi experts,
I want to know where this results will be saved(table name) when we use formula in inspection plan.I have marked char.calc in control indicator and formula has been entered in inspection plan.While entering the result when i click on calc button it is displaying correct result and i have saved.when i check the table QAMR,QASR it is not displaying the result for the MIC which i have used formula.I am able to see the formula in QAMV table.When i want to display this result can i retrive the result directly from any of the table or shall i calculate the formula in the program to display? If i should calculate the formula how to calculate?
Regards,
Shwetha.

Hii,
If u are using Inspection point for the results recording then results will get stored in QASR table. The manually entered results alone will get stored in the Original_ Input field. Calculated parameters will get stored in the mittelwert field (mean value). Kindly check QASE table for lot without inspection points.
For ex : Results Field name mean value (1.7500000000E+02)
with regards,
K.Lokesh.

Finding tables for fields

hello ! i am praveen
i need to know the tables and their relationships
for these fields :
<b>1) ship to party
2) bill to party
3)invoice no
4)invoice date
5)ref doc no<b>

four main categories for a customer are
SOLD TO PARTY
SHIP TO PARTY
BILL TO PARTY
PAYER
i sell a product(assume im a vendor) to customer A ,
and now i need to see who is taking the product it may be A or his office in another location say B
so the product where it is to be shipped will be ship to party .
now since he has received the product he has to pay me the bill .
once he receives the product it will be sent with a invoice quoting the product qty and a price .
so i need to produce a bill to him saying that ur product costs so much and u need to pay me this amount . this is billing .
now to settle the bill he can do it or a Payer can do it .
this is just like combinations of the customers .
for ur understanding lets say sold to ,ship to, bill to , payeer are same .
u can find all the entries in table VBPA (bill to party and ship to party )
sales order in VBAk and VBAP , VBPA ..
delivery details In LIKP LIPS
invoice details IN VBRK VBRP (invoice number and invoice date )
reference document no will be a number on which a sales order is created .
(VBAK-VGBEL)
hope this helps ,
regards,
vijay

Table for field ZYKL1(Cycle length) & ZEIEH(Unit) used in Maintenance stra

Similar Messages

Maybe you are looking for